RESUMO
This study investigates the pathological toe and heel gaits seen in human locomotion using neuromusculoskeletal modelling and simulation. In particular, it aims to investigate potential cause-effect relationships between biomechanical or neural impairments and pathological gaits. Toe and heel gaits are commonly present in spinal cord injury, stroke and cerebral palsy. Toe walking is mainly attributed to spasticity and contracture at plantar flexor muscles, whereas heel walking can be attributed to muscle weakness of biomechanical or neural origin. To investigate the effect of these impairments on gait, this study focuses on the soleus and gastrocnemius muscles as they contribute to ankle plantarflexion. We built a reflex circuit model based on previous work by Geyer and Herr with additional pathways affecting the plantar flexor muscles. The SCONE software, which provides optimisation tools for 2D neuromechanical simulation of human locomotion, is used to optimise the corresponding reflex parameters and simulate healthy gait. We then modelled various bilateral plantar flexor biomechanical and neural impairments, and individually introduced them in the healthy model. We characterised the resulting simulated gaits as pathological or not by comparing ankle kinematics and ankle moment with the healthy optimised gait based on metrics used in clinical studies. Our simulations suggest that toe walking can be generated by hyperreflexia, whereas muscle and neural weaknesses partially induce heel gait. Thus, this 'what if' approach is deemed of great interest as it allows investigation of the effect of various impairments on gait and suggests an important contribution of active reflex mechanisms to pathological toe gait. KEY POINTS: Pathological toe and heel gaits are commonly present in various conditions such as spinal cord injury, stroke and cerebral palsy. These conditions present various neural and biomechanical impairments, but the cause-effect relationships between these impairments and pathological gaits are difficult to establish clinically. Based on neuromechanical simulation, this study focuses on the plantar flexor muscles and builds a new reflex circuit controller to model and evaluate the potential effect of both neural and biomechanical impairments on gait. Our results suggest an important contribution of active reflex mechanisms to pathological toe gait. This 'what if' based on neuromechanical modelling is thus deemed of great interest to target potential causes of pathological gait.
Assuntos
Marcha , Modelos Biológicos , Fenômenos Biomecânicos , Paralisia Cerebral , Marcha/fisiologia , Calcanhar , Humanos , Músculo Esquelético/fisiologia , Traumatismos da Medula Espinal , Acidente Vascular Cerebral , Dedos do Pé , Caminhada/fisiologiaRESUMO
The central nervous system of humans and other animals modulates spinal cord activity to achieve several locomotion behaviors. Previous neuromechanical models investigated the modulation of human gait changing selected parameters belonging to CPGs (Central Pattern Generators) feedforward oscillatory structures or to feedback reflex circuits. CPG-based models could replicate slow and fast walking by changing only the oscillation's properties. On the other hand, reflex-based models could achieve different behaviors through optimizations of large dimensional parameter spaces. However, they could not effectively identify individual key reflex parameters responsible for gait characteristics' modulation. This study investigates which reflex parameters modulate the gait characteristics through neuromechanical simulations. A recently developed reflex-based model is used to perform optimizations with different target behaviors on speed, step length, and step duration to analyze the correlation between reflex parameters and their influence on these gait characteristics. We identified nine key parameters that may affect the target speed ranging from slow to fast walking (0.48 and 1.71 m/s) as well as a large range of step lengths (0.43 and 0.88 m) and step duration (0.51, 0.98 s). The findings show that specific reflexes during stance significantly affect step length regulation, mainly given by positive force feedback of the ankle plantarflexors' group. On the other hand, stretch reflexes active during swing of iliopsoas and gluteus maximus regulate all the gait characteristics under analysis. Additionally, the results show that the hamstrings' group's stretch reflex during the landing phase is responsible for modulating the step length and step duration. Additional validation studies in simulations demonstrated that the modulation of identified reflexes is sufficient to regulate the investigated gait characteristics. Thus, this study provides an overview of possible reflexes involved in modulating speed, step length, and step duration of human gaits.
Assuntos
Marcha/fisiologia , Locomoção/fisiologia , Modelos Neurológicos , Fenômenos Biomecânicos , Biologia Computacional , Simulação por Computador , Humanos , Modelos Anatômicos , Músculo Esquelético/inervação , Músculo Esquelético/fisiologia , Fenômenos Fisiológicos Musculoesqueléticos , Sistema Musculoesquelético/anatomia & histologia , Sistema Musculoesquelético/inervação , Desempenho Psicomotor/fisiologia , Reflexo de Estiramento/fisiologia , Caminhada/fisiologiaRESUMO
This study aims to explore the possibility of estimating a multitude of kinematic and dynamic quantities using subject-specific musculoskeletal models in real-time. The framework was designed to operate with marker-based and inertial measurement units enabling extensions far beyond dedicated motion capture laboratories. We present the technical details for calculating the kinematics, generalized forces, muscle forces, joint reaction loads, and predicting ground reaction wrenches during walking. Emphasis was given to reduce computational latency while maintaining accuracy as compared to the offline counterpart. Notably, we highlight the influence of adequate filtering and differentiation under noisy conditions and its importance for consequent dynamic calculations. Real-time estimates of the joint moments, muscle forces, and reaction loads closely resemble OpenSim's offline analyses. Model-based estimation of ground reaction wrenches demonstrates that even a small error can negatively affect other estimated quantities. An application of the developed system is demonstrated in the context of rehabilitation and gait retraining. We expect that such a system will find numerous applications in laboratory settings and outdoor conditions with the advent of predicting or sensing environment interactions. Therefore, we hope that this open-source framework will be a significant milestone for solving this grand challenge.
Assuntos
Marcha , Caminhada , Fenômenos Biomecânicos , MúsculosRESUMO
One of the most common knee injuries is the Anterior Cruciate Ligament (ACL) rupture with severe implications on knee stability. The usual treatment is the ACL Reconstruction (ACLR) surgery where the surgeon replaces the torn ligament with a graft in an effort to restore knee kinematics. In case of excessive rotatory instability, Lateral Extra-Articular Tenodesis (LET) can be performed in combination with ACLR. Additionally, LET appears to reduce ACLR graft forces minimizing graft failure chances. However, there are concerns about overconstraining physiological rotation. To gain insight in this controversial topic, we developed an automatic, open-source tool to create a series of Finite Element (FE) models attempting to investigate the interactions of ACLR and LET through simulation. We started by creating a validated model of the healthy knee joint that served as reference for subsequent FE simulations. Then, we created FE models of standalone ACLR and combined ACLR-LET. Each model was assessed by applying a loading profile that resembles the reduction phase of the Pivot-Shift clinical exam. We measured the External Tibia Rotation (ETR), the Posterior Tibia Translation (PTT) of the lateral tibial compartment, and the ACLR graft stress developed around the femoral tunnel insertion site. We observed the following: a) LET reduces ETR and PTT compared to isolated ACLR, b) combined ACLR-LET is more sensitive to LET graft pretension with lower values showcasing performance closer to the healthy joint, c) LET reduces ACLR graft forces for the same pretension values, d) LET exhibits significant overconstraint for higher pretension values. In general, these findings are in agreement with relevant clinical studies and accentuate the potential of the developed framework as a tool that can assist orthopaedists during surgery planning. We provide open access for the FE models of this study to enhance research transparency, reproducibility and extensibility.
Assuntos
Lesões do Ligamento Cruzado Anterior , Instabilidade Articular , Tenodese , Humanos , Análise de Elementos Finitos , Reprodutibilidade dos Testes , Instabilidade Articular/cirurgia , Articulação do Joelho/cirurgia , Lesões do Ligamento Cruzado Anterior/cirurgia , Fenômenos Biomecânicos , CadáverRESUMO
Objective.Studying the neural components regulating movement in human locomotion is obstructed by the inability to perform invasive experimental recording in the human neural circuits. Neuromechanical simulations can provide insights by modeling the locomotor circuits. Past neuromechanical models proposed control of locomotion either driven by central pattern generators (CPGs) with simple sensory commands or by a purely reflex-based network regulated by state-machine mechanisms, which activate and deactivate reflexes depending on the detected gait cycle phases. However, the physiological interpretation of these state machines remains unclear. Here, we present a physiologically plausible model to investigate spinal control and modulation of human locomotion.Approach.We propose a bio-inspired controller composed of two coupled CPGs that produce the rhythm and pattern, and a reflex-based network simulating low-level reflex pathways and Renshaw cells. This reflex network is based on leaky-integration neurons, and the whole system does not rely on changing reflex gains according to the gait cycle state. The musculoskeletal model is composed of a skeletal structure and nine muscles per leg generating movement in sagittal plane.Main results.Optimizing the open parameters for effort minimization and stability, human kinematics and muscle activation naturally emerged. Furthermore, when CPGs were not activated, periodic motion could not be achieved through optimization, suggesting the necessity of this component to generate rhythmic behavior without a state machine mechanism regulating reflex activation. The controller could reproduce ranges of speeds from 0.3 to 1.9 m s-1. The results showed that the net influence of feedback on motoneurons (MNs) during perturbed locomotion is predominantly inhibitory and that the CPGs provide the timing of MNs' activation by exciting or inhibiting muscles in specific gait phases.Significance.The proposed bio-inspired controller could contribute to our understanding of locomotor circuits of the intact spinal cord and could be used to study neuromotor disorders.
Assuntos
Geradores de Padrão Central , Humanos , Geradores de Padrão Central/fisiologia , Locomoção/fisiologia , Marcha/fisiologia , Medula Espinal/fisiologia , Reflexo/fisiologiaRESUMO
Background: Gait and balance impairments are often present in people with multiple sclerosis (PwMS) and have a significant impact on quality of life and independence. Gold-standard quantitative tools for assessing gait and balance such as motion capture systems and force plates usually require complex technical setups. Wearable sensors, including those integrated into smartphones, offer a more frequent, convenient, and minimally burdensome assessment of functional disability in a home environment. We developed a novel smartphone sensor-based application (Floodlight) that is being used in multiple research and clinical contexts, but a complete validation of this technology is still lacking. Methods: This protocol describes an observational study designed to evaluate the analytical and clinical validity of Floodlight gait and balance tests. Approximately 100 PwMS and 35 healthy controls will perform multiple gait and balance tasks in both laboratory-based and real-world environments in order to explore the following properties: (a) concurrent validity of the Floodlight gait and balance tests against gold-standard assessments; (b) reliability of Floodlight digital measures derived under different controlled gait and balance conditions, and different on-body sensor locations; (c) ecological validity of the tests; and (d) construct validity compared with clinician- and patient-reported assessments. Conclusions: The Floodlight GaitLab study (ISRCTN15993728) represents a critical step in the technical validation of Floodlight technology to measure gait and balance in PwMS, and will also allow the development of new test designs and algorithms.
RESUMO
Anterior cruciate ligament (ACL) tear is one of the most common knee injuries. The ACL reconstruction surgery aims to restore healthy knee function by replacing the injured ligament with a graft. Proper selection of the optimal surgery parameters is a complex task. To this end, we developed an automated modeling framework that accepts subject-specific geometries and produces finite element knee models incorporating different surgical techniques. Initially, we developed a reference model of the intact knee, validated with data provided by the Open Knee(s) project. This helped us evaluate the effectiveness of estimating ligament stiffness directly from MRI. Next, we performed a plethora of "what-if" simulations, comparing responses with the reference model. We found that (a) increasing graft pretension and radius reduces relative knee displacement, (b) the correlation of graft radius and tension should not be neglected, (c) graft fixation angle of 20[Formula: see text] can reduce knee laxity, and (d) single-versus double-bundle techniques demonstrate comparable performance in restraining knee translation. In most cases, these findings confirm reported values from comparative clinical studies. The numerical models are made publicly available, allowing for experimental reuse and lowering the barriers for meta-studies. The modeling approach proposed here can complement orthopedic surgeons in their decision-making.
Assuntos
Lesões do Ligamento Cruzado Anterior , Reconstrução do Ligamento Cruzado Anterior , Ligamento Cruzado Anterior/cirurgia , Lesões do Ligamento Cruzado Anterior/cirurgia , Reconstrução do Ligamento Cruzado Anterior/métodos , Fenômenos Biomecânicos , Análise de Elementos Finitos , Humanos , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgiaRESUMO
This study presents a semi-automatic framework to create subject-specific total knee replacement finite element models, which can be used to analyze locomotion patterns and evaluate knee dynamics. In recent years, much scientific attention was attracted to pre-clinical optimization of customized total knee replacement operations through computational modeling to minimize post-operational adverse effects. However, the time-consuming and laborious process of developing a subject-specific finite element model poses an obstacle to the latter. One of this work's main goals is to automate the finite element model development process, which speeds up the proposed framework and makes it viable for practical applications. This pipeline's reliability was ratified by developing and validating a subject-specific total knee replacement model based on the 6th SimTK Grand Challenge data set. The model was validated by analyzing contact pressures on the tibial insert in relation to the patient's gait and analysis of tibial contact forces, which were found to be in accordance with the ones provided by the Grand Challenge data set. Subsequently, a sensitivity analysis was carried out to assess the influence of modeling choices on tibial insert's contact pressures and determine possible uncertainties on the models produced by the framework. Parameters, such as the position of ligament origin points, ligament stiffness, reference strain, and implant-bone alignment were used for the sensitivity study. Notably, it was found that changes in the alignment of the femoral component in reference to the knee bones significantly affect the load distribution at the tibiofemoral joint, with an increase of 206.48% to be observed at contact pressures during 5° internal rotation. Overall, the models produced by this pipeline can be further used to optimize and personalize surgery by evaluating the best surgical parameters in a simulated manner before the actual surgery.
RESUMO
The anterior cruciate ligament (ACL) constitutes one of the most important stabilizing tissues of the knee joint whose rapture is very prevalent. ACL reconstruction (ACLR) from a graft is a surgery which yields the best outcome. Taking into account the complicated nature of this operation and the high cost of experiments, finite element (FE) simulations can become a valuable tool for evaluating the surgery in a pre-clinical setting. The present study summarizes, for the first time, the current advancement in ACLR in both clinical and computational level. It also emphasizes on the material modeling and properties of the most popular grafts as well as modeling of different surgery techniques. It can be concluded that more effort is needed to be put toward more realistic simulation of the surgery, including also the use of two bundles for graft representation, graft pretension and artificial grafts. Furthermore, muscles and synovial fluid need to be included, while patellofemoral joint is an important bone that is rarely used. More realistic models are also required for soft tissues, as most articles used isotropic linear elastic models and springs. In summary, accurate and realistic FE analysis in conjunction with multidisciplinary collaboration could contribute to ACLR improvement provided that several important aspects are carefully considered.
RESUMO
The coordination of the human musculoskeletal system is deeply influenced by its redundant structure, in both kinematic and dynamic terms. Noticing a lack of a relevant, thorough treatment in the literature, we formally address the issue in order to understand and quantify factors affecting the motor coordination. We employed well-established techniques from linear algebra and projection operators to extend the underlying kinematic and dynamic relations by modeling the redundancy effects in null space. We distinguish three types of operational spaces, namely task, joint and muscle space, which are directly associated with the physiological factors of the system. A method for consistently quantifying the redundancy on multiple levels in the entire space of feasible solutions is also presented. We evaluate the proposed muscle space projection on segmental level reflexes and the computation of the feasible muscle forces for arbitrary movements. The former proves to be a convenient representation for interfacing with segmental level models or implementing controllers for tendon driven robots, while the latter enables the identification of force variability and correlations between muscle groups, attributed to the system's redundancy. Furthermore, the usefulness of the proposed framework is demonstrated in the context of estimating the bounds of the joint reaction loads, where we show that misinterpretation of the results is possible if the null space forces are ignored. This work presents a theoretical analysis of the redundancy problem, facilitating application in a broad range of fields related to motor coordination, as it provides the groundwork for null space characterization. The proposed framework rigorously accounts for the effects of kinematic and dynamic redundancy, incorporating it directly into the underlying equations using the notion of null space projection, leading to a complete description of the system.
Assuntos
Modelos Biológicos , Músculo Esquelético/fisiologia , Humanos , Movimento/fisiologiaRESUMO
This work presents a framework for computing the limbs' stiffness using inverse methods that account for the musculoskeletal redundancy effects. The musculoskeletal task, joint and muscle stiffness are regulated by the central nervous system towards improving stability and interaction with the environment during movement. Many pathological conditions, such as Parkinson's disease, result in increased rigidity due to elevated muscle tone in antagonist muscle pairs, therefore the stiffness is an important quantity that can provide valuable information during the analysis phase. Musculoskeletal redundancy poses significant challenges in obtaining accurate stiffness results without introducing critical modeling assumptions. Currently, model-based estimation of stiffness relies on some objective criterion to deal with muscle redundancy, which, however, cannot be assumed to hold in every context. To alleviate this source of error, our approach explores the entire space of possible solutions that satisfy the action and the physiological muscle constraints. Using the notion of null space, the proposed framework rigorously accounts for the effect of muscle redundancy in the computation of the feasible stiffness characteristics. To confirm this, comprehensive case studies on hand movement and gait are provided, where the feasible endpoint and joint stiffness is evaluated. Notably, this process enables the estimation of stiffness distribution over the range of motion and aids in further investigation of factors affecting the capacity of the system to modulate its stiffness. Such knowledge can significantly improve modeling by providing a holistic overview of dynamic quantities related to the human musculoskeletal system, despite its inherent redundancy.
Assuntos
Modelos Biológicos , Rigidez Muscular/fisiopatologia , Fenômenos Fisiológicos Musculoesqueléticos , Fenômenos Biomecânicos , Marcha/fisiologia , Mãos/fisiologia , Humanos , Músculo Esquelético/fisiologia , Músculos/fisiologia , Amplitude de Movimento ArticularRESUMO
OBJECTIVE: This paper proposes an operational task space formalization of constrained musculoskeletal systems, motivated by its promising results in the field of robotics. METHODS: The change of representation requires different algorithms for solving the inverse and forward dynamics simulation in the task space domain. We propose an extension to the direct marker control and an adaptation of the computed muscle control algorithms for solving the inverse kinematics and muscle redundancy problems, respectively. RESULTS: Experimental evaluation demonstrates that this framework is not only successful in dealing with the inverse dynamics problem, but also provides an intuitive way of studying and designing simulations, facilitating assessment prior to any experimental data collection. SIGNIFICANCE: The incorporation of constraints in the derivation unveils an important extension of this framework toward addressing systems that use absolute coordinates and topologies that contain closed kinematic chains. Task space projection reveals a more intuitive encoding of the motion planning problem, allows for better correspondence between observed and estimated variables, provides the means to effectively study the role of kinematic redundancy, and most importantly, offers an abstract point of view and control, which can be advantageous toward further integration with high level models of the precommand level. CONCLUSION: Task-based approaches could be adopted in the design of simulation related to the study of constrained musculoskeletal systems.