Extremely anisotropic van der Waals thermal conductors.

The densification of integrated circuits requires thermal management strategies and high thermal conductivity materials1-3. Recent innovations include the development of materials with thermal conduction anisotropy, which can remove hotspots along the fast-axis direction and provide thermal insulation along the slow axis4,5. However, most artificially engineered thermal conductors have anisotropy ratios much smaller than those seen in naturally anisotropic materials. Here we report extremely anisotropic thermal conductors based on large-area van der Waals thin films with random interlayer rotations, which produce a room-temperature thermal anisotropy ratio close to 900 in MoS2, one of the highest ever reported. This is enabled by the interlayer rotations that impede the through-plane thermal transport, while the long-range intralayer crystallinity maintains high in-plane thermal conductivity. We measure ultralow thermal conductivities in the through-plane direction for MoS2 (57 ± 3 mW m-1 K-1) and WS2 (41 ± 3 mW m-1 K-1) films, and we quantitatively explain these values using molecular dynamics simulations that reveal one-dimensional glass-like thermal transport. Conversely, the in-plane thermal conductivity in these MoS2 films is close to the single-crystal value. Covering nanofabricated gold electrodes with our anisotropic films prevents overheating of the electrodes and blocks heat from reaching the device surface. Our work establishes interlayer rotation in crystalline layered materials as a new degree of freedom for engineering-directed heat transport in solid-state systems.

Large-Scale Analysis of Defects in Atomically Thin Semiconductors using Hyperspectral Line Imaging.

Point defects play a crucial role in determining the properties of atomically thin semiconductors. This work demonstrates the controlled formation of different types of defects and their comprehensive optical characterization using hyperspectral line imaging (HSLI). Distinct optical responses are observed in monolayer semiconductors grown under different stoichiometries using metal-organic chemical vapor deposition. HSLI enables the simultaneous measurement of 400 spectra, allowing for statistical analysis of optical signatures at close to a centimeter scale. The study discovers that chalcogen-rich samples exhibit remarkable optical uniformity due to reduced precursor accumulation compared to the metal-rich case. The utilization of HSLI as a facile and reliable characterization tool pushes the boundaries of potential applications for atomically thin semiconductors in future devices.

Atomically Thin, Optically Isotropic Films with 3D Nanotopography.

Flat optics aims for the on-chip miniaturization of optical systems for high-speed and low-power operation, with integration of thin and lightweight components. Here, we present atomically thin yet optically isotropic films realized by using three-dimensional (3D) topographic reconstruction of anisotropic two-dimensional (2D) films to balance the out-of-plane and in-plane optical responses on the subwavelength scale. We achieve this by conformal growth of monolayer transition metal dichalcogenide (TMD) films on nanodome-structured substrates. The resulting films show an order-of-magnitude increase in the out-of-plane susceptibility for enhanced angular performance, displaying polarization isotropy in the off-axis absorption, as well as improved photoluminescence emission profiles, compared to their flat-film counterparts. We further show that such 3D geometric programming of optical properties is applicable to different TMD materials, offering spectral generalization over for the entire visible range. Our approach presents a powerful platform for advancing the development of atomically thin flat optics with custom-designed light-matter interactions.

Tuning Electrical Conductance of MoS2 Monolayers through Substitutional Doping.

Tuning electrical conductivity of semiconducting materials through substitutional doping is crucial for fabricating functional devices. This, however, has not been fully realized in two-dimensional (2D) materials due to the difficulty of homogeneously controlling the dopant concentrations and the lack of systematic study of the net impact of substitutional dopants separate from that of the unintentional doping from the device fabrication processes. Here, we grow wafer-scale, continuous MoS2 monolayers with tunable concentrations of Nb and Re and fabricate devices using a polymer-free approach to study the direct electrical impact of substitutional dopants in MoS2 monolayers. In particular, the electrical conductivity of Nb doped MoS2 in the absence of electrostatic gating is reproducibly tuned over 7 orders of magnitude by controlling the Nb concentration. Our study further indicates that the dopant carriers do not fully ionize in the 2D limit, unlike in their three-dimensional analogues, which is explained by weaker charge screening and impurity band conduction. Moreover, we show that the dopants are stable, which enables the doped films to be processed as independent building blocks that can be used as electrodes for functional circuitry.

Pressurizing Field-Effect Transistors of Few-Layer MoS2 in a Diamond Anvil Cell.

Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic degree of freedom of functional materials via, for example, the field-effect transistor (FET) configuration. Combining these two orthogonal approaches would allow discovery of new physical properties and phases going beyond the known phase space. Such experiments are, however, technically challenging and have not been demonstrated. Herein, we report a feasible strategy to prepare and measure FETs in a DAC by lithographically patterning the nanodevices onto the diamond culet. Multiple-terminal FETs were fabricated in the DAC using few-layer MoS2 and BN as the channel semiconductor and dielectric layer, respectively. It is found that the mobility, conductance, carrier concentration, and contact conductance of MoS2 can all be significantly enhanced with pressure. We expect that the approach could enable unprecedented ways to explore new phases and properties of materials under coupled mechano-electrostatic modulation.

Quantifying van der Waals Interactions in Layered Transition Metal Dichalcogenides from Pressure-Enhanced Valence Band Splitting.

van der Waals (vdW) forces, despite being relatively weak, hold the layers together in transition metal dichalcogenides (TMDs) and play a key role in their band structure evolution, hence profoundly affecting their physical properties. In this work, we experimentally probe the vdW interactions in MoS2 and other TMDs by measuring the valence band maximum (VBM) splitting (Δ) at K point as a function of pressure in a diamond anvil cell. As high pressure increases interlayer wave function coupling, the VBM splitting is enhanced in 2H-stacked MoS2 multilayers but, due to its specific geometry, not in 3R-stacked multilayers, hence allowing the interlayer contribution to be separated out of the total VBM splitting, as well as predicting a negative pressure (2.4 GPa) where the interlayer contribution vanishes. This negative pressure represents the threshold vdW interaction beyond which neighboring layers are electronically decoupled. This approach is compared to first-principles calculations and found to be widely applicable to other group-VI TMDs.

Dynamic Control of Optical Response in Layered Metal Chalcogenide Nanoplates.

Tunable optical transitions in ultrathin layered 2-dimensional (2D) materials unveil the electronic structures of materials and provide exciting prospects for potential applications in optics and photonics. Here, we present our realization of dynamic optical modulation of layered metal chalcogenide nanoplates using ionic liquid (IL) gating over a wide spectral range. The IL gating significantly increased the tuning range of the Fermi level and, as a result, substantially altered the optical transitions in the nanoplates. Using heavily n-doped Bi2Se3 nanoplates, we substantially modulated the light transmission through the ultrathin layer. A tunable, high-transmission spectral window in the visible to near-infrared region has been observed due to simultaneous shifts of both the plasma edge and absorption edge of the material. On the other hand, optical response of multilayer MoSe2 flakes gated by IL has shown enhanced transmission in both positive and negative biases, which is consistent with their ambipolar electrical behavior. The electrically controlled optical property tuning in metal chalcogenide material systems provides new opportunities for potential applications, such as wide spectral range optical modulators, optical filters, and electrically controlled smart windows with extremely low material consumption.

Nanotexturing To Enhance Photoluminescent Response of Atomically Thin Indium Selenide with Highly Tunable Band Gap.

Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density.

Laser damage mechanisms in conductive widegap semiconductor films.

Laser damage mechanisms of two conductive wide-bandgap semiconductor films - indium tin oxide (ITO) and silicon doped GaN (Si:GaN) were studied via microscopy, spectroscopy, photoluminescence (PL), and elemental analysis. Nanosecond laser pulse exposures with a laser photon energy (1.03 eV, 1064 nm) smaller than the conductive films bandgaps were applied and radically different film damage morphologies were produced. The laser damaged ITO film exhibited deterministic features of thermal degradation. In contrast, laser damage in the Si:GaN film resulted in highly localized eruptions originating at interfaces. For ITO, thermally driven damage was related to free carrier absorption and, for GaN, carbon complexes were proposed as potential damage precursors or markers.

Magnetoresistance oscillations in topological insulator Bi2Te3 nanoscale antidot arrays.

Nanoscale antidot arrays were fabricated on a single-crystal microflake of topological insulator Bi2Te3. The introduction of antidot arrays significantly increased the resistance of the microflake, yet the temperature dependence of the resistance remains metallic. We observed that small oscillations that are periodic in magnetic field B appeared on top of the weak anti-localization magnetoresistance. Since the electron coherence length at low temperature becomes comparable to the feature size in our device, we argued that the magnetoresistance oscillations are the manifestation of quantum interference induced by the nanostructure. Our work demonstrates that the transport of topological insulators could indeed be controlled by artificially created nanostructures, and paves the way for future technological applications of this class of materials.

Tuning interlayer coupling in large-area heterostructures with CVD-grown MoS2 and WS2 monolayers.

Band offsets between different monolayer transition metal dichalcogenides are expected to efficiently separate charge carriers or rectify charge flow, offering a mechanism for designing atomically thin devices and probing exotic two-dimensional physics. However, developing such large-area heterostructures has been hampered by challenges in synthesis of monolayers and effectively coupling neighboring layers. Here, we demonstrate large-area (>tens of micrometers) heterostructures of CVD-grown WS2 and MoS2 monolayers, where the interlayer interaction is externally tuned from noncoupling to strong coupling. Following this trend, the luminescence spectrum of the heterostructures evolves from an additive line profile where each layer contributes independently to a new profile that is dictated by charge transfer and band normalization between the WS2 and MoS2 layers. These results and findings open up venues to creating new material systems with rich functionalities and novel physical effects.

Direct observation of nanoscale Peltier and Joule effects at metal-insulator domain walls in vanadium dioxide nanobeams.

The metal to insulator transition (MIT) of strongly correlated materials is subject to strong lattice coupling, which brings about the unique one-dimensional alignment of metal-insulator (M-I) domains along nanowires or nanobeams. Many studies have investigated the effects of stress on the MIT and hence the phase boundary, but few have directly examined the temperature profile across the metal-insulating interface. Here, we use thermoreflectance microscopy to create two-dimensional temperature maps of single-crystalline VO2 nanobeams under external bias in the phase coexisting regime. We directly observe highly localized alternating Peltier heating and cooling as well as Joule heating concentrated at the M-I domain boundaries, indicating the significance of the domain walls and band offsets. Utilizing the thermoreflectance technique, we are able to elucidate strain accumulation along the nanobeam and distinguish between two insulating phases of VO2 through detection of the opposite polarity of their respective thermoreflectance coefficients. Microelasticity theory was employed to predict favorable domain wall configurations, confirming the monoclinic phase identification.

Doping against the native propensity of MoS2: degenerate hole doping by cation substitution.

Layered transition metal dichalcogenides (TMDs) draw much attention as the key semiconducting material for two-dimensional electrical, optoelectronic, and spintronic devices. For most of these applications, both n- and p-type materials are needed to form junctions and support bipolar carrier conduction. However, typically only one type of doping is stable for a particular TMD. For example, molybdenum disulfide (MoS2) is natively an n-type presumably due to omnipresent electron-donating sulfur vacancies, and stable/controllable p-type doping has not been achieved. The lack of p-type doping hampers the development of charge-splitting p-n junctions of MoS2, as well as limits carrier conduction to spin-degenerate conduction bands instead of the more interesting, spin-polarized valence bands. Traditionally, extrinsic p-type doping in TMDs has been approached with surface adsorption or intercalation of electron-accepting molecules. However, practically stable doping requires substitution of host atoms with dopants where the doping is secured by covalent bonding. In this work, we demonstrate stable p-type conduction in MoS2 by substitutional niobium (Nb) doping, leading to a degenerate hole density of ∼ 3 × 10(19) cm(-3). Structural and X-ray techniques reveal that the Nb atoms are indeed substitutionally incorporated into MoS2 by replacing the Mo cations in the host lattice. van der Waals p-n homojunctions based on vertically stacked MoS2 layers are fabricated, which enable gate-tunable current rectification. A wide range of microelectronic, optoelectronic, and spintronic devices can be envisioned from the demonstrated substitutional bipolar doping of MoS2. From the miscibility of dopants with the host, it is also expected that the synthesis technique demonstrated here can be generally extended to other TMDs for doping against their native unipolar propensity.

Elastic properties of chemical-vapor-deposited monolayer MoS2, WS2, and their bilayer heterostructures.

Elastic properties of materials are an important factor in their integration in applications. Chemical vapor deposited (CVD) monolayer semiconductors are proposed as key components in industrial-scale flexible devices and building blocks of two-dimensional (2D) van der Waals heterostructures. However, their mechanical and elastic properties have not been fully characterized. Here we report high 2D elastic moduli of CVD monolayer MoS2 and WS2 (∼170 N/m), which is very close to the value of exfoliated MoS2 monolayers and almost half the value of the strongest material, graphene. The 2D moduli of their bilayer heterostructures are lower than the sum of 2D modulus of each layer but comparable to the corresponding bilayer homostructure, implying similar interactions between the hetero monolayers as between homo monolayers. These results not only provide deep insight into understanding interlayer interactions in 2D van der Waals structures but also potentially allow engineering of their elastic properties as desired.

Phase-Centric MOCVD Enabled Synthetic Approaches for Wafer-Scale 2D Tin Selenides.

Following an initial nucleation stage at the flake level, atomically thin film growth of a van der Waals material is promoted by ultrafast lateral growth and prohibited vertical growth. To produce these highly anisotropic films, synthetic or post-synthetic modifications are required, or even a combination of both, to ensure large-area, pure-phase, and low-temperature deposition. A set of synthetic strategies is hereby presented to selectively produce wafer-scale tin selenides, SnSex (both x = 1 and 2), in the 2D forms. The 2D-SnSe2 films with tuneable thicknesses are directly grown via metal-organic chemical vapor deposition (MOCVD) at 200 °C, and they exhibit outstanding crystallinities and phase homogeneities and consistent film thickness across the entire wafer. This is enabled by excellent control of the volatile metal-organic precursors and decoupled dual-temperature regimes for high-temperature ligand cracking and low-temperature growth. In contrast, SnSe, which intrinsically inhibited from 2D growth, is indirectly prepared by a thermally driven phase transition of an as-grown 2D-SnSe2 film with all the benefits of the MOCVD technique. It is accompanied by the electronic n-type to p-type crossover at the wafer scale. These tailor-made synthetic routes will accelerate the low-thermal-budget production of multiphase 2D materials in a reliable and scalable fashion.

Area-selective atomic layer deposition on 2D monolayer lateral superlattices.

The advanced patterning process is the basis of integration technology to realize the development of next-generation high-speed, low-power consumption devices. Recently, area-selective atomic layer deposition (AS-ALD), which allows the direct deposition of target materials on the desired area using a deposition barrier, has emerged as an alternative patterning process. However, the AS-ALD process remains challenging to use for the improvement of patterning resolution and selectivity. In this study, we report a superlattice-based AS-ALD (SAS-ALD) process using a two-dimensional (2D) MoS2-MoSe2 lateral superlattice as a pre-defining template. We achieved a minimum half pitch size of a sub-10 nm scale for the resulting AS-ALD on the 2D superlattice template by controlling the duration time of chemical vapor deposition (CVD) precursors. SAS-ALD introduces a mechanism that enables selectivity through the adsorption and diffusion processes of ALD precursors, distinctly different from conventional AS-ALD method. This technique facilitates selective deposition even on small pattern sizes and is compatible with the use of highly reactive precursors like trimethyl aluminum. Moreover, it allows for the selective deposition of a variety of materials, including Al2O3, HfO2, Ru, Te, and Sb2Se3.

Axially engineered metal-insulator phase transition by graded doping VO2 nanowires.

The abrupt first-order metal-insulator phase transition in single-crystal vanadium dioxide nanowires (NWs) is engineered to be a gradual transition by axially grading the doping level of tungsten. We also demonstrate the potential of these NWs for thermal sensing and actuation applications. At room temperature, the graded-doped NWs show metal phase on the tips and insulator phase near the center of the NW, and the metal phase grows progressively toward the center when the temperature rises. As such, each individual NW acts as a microthermometer that can be simply read out with an optical microscope. The NW resistance decreases gradually with the temperature rise, eventually reaching 2 orders of magnitude drop, in stark contrast to the abrupt resistance change in undoped VO2 wires. This novel phase transition yields an extremely high temperature coefficient of resistivity ~10%/K, simultaneously with a very low resistivity down to 0.001 Ω·cm, making these NWs promising infrared sensing materials for uncooled microbolometers. Lastly, they form bimorph thermal actuators that bend with an unusually high curvature, ~900 m(-1)·K(-1) over a wide temperature range (35-80 °C), significantly broadening the response temperature range of previous VO2 bimorph actuators. Given that the phase transition responds to a diverse range of stimuli-heat, electric current, strain, focused light, and electric field-the graded-doped NWs may find wide applications in thermo-opto-electro-mechanical sensing and energy conversion.

Dense electron system from gate-controlled surface metal-insulator transition.

Two-dimensional electron systems offer enormous opportunities for science discoveries and technological innovations. Here we report a dense electron system on the surface of single-crystal vanadium dioxide nanobeam via electrolyte gating. The overall conductance of the nanobeam increases by nearly 100 times at a gate voltage of 3 V. A series of experiments were carried out which rule out electrochemical reaction, impurity doping, and oxygen vacancy diffusion as the dominant mechanism for the conductance modulation. A surface insulator-to-metal transition is electrostatically triggered, thereby collapsing the bandgap and unleashing an extremely high density of free electrons from the original valence band within a depth self-limited by the energetics of the system. The dense surface electron system can be reversibly tuned by the gating electric field, which provides direct evidence of the electron correlation driving mechanism of the phase transition in VO(2). It also offers a new material platform for implementing Mott transistor and novel sensors and investigating low-dimensional correlated electron behavior.

Atomic Layer Deposition Route to Scalable, Electronic-Grade van der Waals Te Thin Films.

Scalable production and integration techniques for van der Waals (vdW) layered materials are vital for their implementation in next-generation nanoelectronics. Among available approaches, perhaps the most well-received is atomic layer deposition (ALD) due to its self-limiting layer-by-layer growth mode. However, ALD-grown vdW materials generally require high processing temperatures and/or additional postdeposition annealing steps for crystallization. Also, the collection of ALD-producible vdW materials is rather limited by the lack of a material-specific tailored process design. Here, we report the annealing-free wafer-scale growth of monoelemental vdW tellurium (Te) thin films using a rationally designed ALD process at temperatures as low as 50 °C. They exhibit exceptional homogeneity/crystallinity, precise layer controllability, and 100% step coverage, all of which are enabled by introducing a dual-function co-reactant and adopting a so-called repeating dosing technique. Electronically, vdW-coupled and mixed-dimensional vertical p-n heterojunctions with MoS2 and n-Si, respectively, are demonstrated with well-defined current rectification as well as spatial uniformity. Additionally, we showcase an ALD-Te-based threshold switching selector with fast switching time (∼40 ns), selectivity (∼104), and low Vth (∼1.3 V). This synthetic strategy allows the low-thermal-budget production of vdW semiconducting materials in a scalable fashion, thereby providing a promising approach for monolithic integration into arbitrary 3D device architectures.

Double-Floating-Gate van der Waals Transistor for High-Precision Synaptic Operations.

Two-dimensional materials and their heterostructures have thus far been identified as leading candidates for nanoelectronics owing to the near-atom thickness, superior electrostatic control, and adjustable device architecture. These characteristics are indeed advantageous for neuro-inspired computing hardware where precise programming is strongly required. However, its successful demonstration fully utilizing all of the given benefits remains to be further developed. Herein, we present van der Waals (vdW) integrated synaptic transistors with multistacked floating gates, which are reconfigured upon surface oxidation. When compared with a conventional device structure with a single floating gate, our double-floating-gate (DFG) device exhibits better nonvolatile memory performance, including a large memory window (>100 V), high on-off current ratio (∼107), relatively long retention time (>5000 s), and satisfactory cyclic endurance (>500 cycles), all of which can be attributed to its increased charge-storage capacity and spatial redistribution. This facilitates highly effective modulation of trapped charge density with a large dynamic range. Consequently, the DFG transistor exhibits an improved weight update profile in long-term potentiation/depression synaptic behavior for nearly ideal classification accuracies of up to 96.12% (MNIST) and 81.68% (Fashion-MNIST). Our work adds a powerful option to vdW-bonded device structures for highly efficient neuromorphic computing.