A magnetically induced self-assembly of Ru@Fe3O4/rGO cathode for diclofenac degradation in electro-Fenton process.

In this study, a novel magnetic nanocomposite of Ru@Fe3O4/rGO was successfully synthesized by a simple hydro-thermal method. The Ru@Fe3O4/rGO particles were assembled and immobilized for innovative magnetically assembled electrode (MAE) without any binder, and the electrode was further applied in heterogeneous electro-Fenton (hetero-EF) process for the degradation of diclofenac (DCF). The results showed that rGO could remarkably enhance the conductivity and catalyze the two-electron oxygen reduction, which greatly improved the generation of H2O2. In addition, the mixture valence of Fe and Ru species might provide rich reaction sites and enhance electron transfer by synergy. Thus, the Ru@Fe3O4/rGO MAE exhibited a stable and high electrocatalytic activity in the hetero-EF process for DCF degradation over a wide pH range from 2 to 9 owing to the higher electroactive surface area (EASA) and lower charge/mass-transfer resistance. The DCF degradation efficiency could reach about 100% within 90 min under pH 5 and current 40 mA, and the Ru@Fe3O4/rGO MAE showed high stability and reusability after five cycles. Theoretically, 1O2 and •OH were the main reactive oxygen species (ROS) participating in DCF degradation in the Ru@Fe3O4/rGO MAE hetero-EF process. Furthermore, according to the LC-MS/MS intermediates, the possible DCF degradation pathway was deduced including dechlorination, hydroxylation and ring opening attacked by ROS. Eleven intermediates were detected during DCF degradation in the MAE hetero-EF process, and the ecological risk of DCF degradation in Ru@Fe3O4/rGO MAE hetero-EF process was significantly reduced. This study provides new insights into the magnetically assembled electrode of Ru@Fe3O4/rGO and displays a new practical application prospect of the materials for high-efficient removal and degradation of DCF from wastewater.

Machine Learning Algorithms for Intelligent Decision Recognition and Quantification of Cr(III) in Chromium Speciation.

Cr(III) is a common oxidation state of chromium, and its presence in the environment can occur naturally or as a result of human activities, such as industrial processes, mining, and waste disposal. This article explores the application of machine learning algorithms for the intelligent decision recognition and quantification of Cr(III) in chromium speciation. Three different machine learning models, namely, the Decision Tree (DT) model, the PCA-SVM (Principal Component Analysis-Support Vector Machine) model, and the LDA (Linear Discriminant Analysis) model, were employed and evaluated for accurate and efficient classification of chromium concentrations based on their fluorescence responses. Furthermore, stepwise multiple linear regression analysis was utilized to achieve a more precise quantification of trivalent chromium concentrations through fluorescence visualization. The results demonstrate the potential of machine learning algorithms in accurately detecting and quantifying Cr(III) in chromium speciation with implications for environmental and industrial applications in chromium detection and quantification. The findings from this research pave the way for further exploration and implementation of these models in real-world scenarios, offering valuable insights into various environmental and industrial contexts.

Green-emitting carbon quantum dots as a dual-mode fluorescent and colorimetric sensor for hypochlorite.

In this work, green-emitting carbon quantum dots were successfully prepared through a facile one-step solid-state reaction method. The obtained green-emitting carbon dots (G-CDs) showed good fluorescence stability in NaCl aqueous solution and different pH values. Moreover, the G-CDs showed high sensitivity and selectivity for detecting hypochlorite by both fluorometry and colorimetry. Under the optimized condition, a highly sensitive detection of hypochlorite was established in the range of 0.2-100 µM and 10-150 µM for fluorescent and colorimetric methods, respectively. The corresponding limits of detection (LOD) were 0.0781 µM and 1.82 µM, respectively. Therefore, the G-CDs were successfully applied to determinate hypochlorite in actual water samples. In addition, a paper-based sensor loading with the G-CDs was also developed for rapid visual detection of hypochlorite. The results suggested that the G-CDs could be a promising candidate to detect hypochlorite.

On-site detection of As(III) based on silver nanoparticles aggregation mediated by phosphates using surface-enhanced Raman scattering (SERS).

A portable and simple method was developed for on-site selective determination of As(III) based on the SERS signal of As(III)-O vibration. The method relies on the synergistic effect of nanoparticles aggregation and analyte adsorption. Experimental results demonstrated that phosphate replaced the ligands of HH@Ag NPs, which in turn facilitated the adsorption of As(III) on the surface of HH@Ag NPs. The phosphate was introduced as an agglomerating agent to improve the detection ability of the method for As(III). The method shows good selectivity and linear relationship between 5 × 10-8 and 0.8 × 10-6 M, with the detection limit of 1.8 × 10-9 M. The method was applied to actual water samples and successfully detected As(III), indicating that the method could have application potential in actual detection scenarios.

Role of nitroxyl (HNO) in cardiovascular system: From biochemistry to pharmacology.

Cardiovascular diseases are recognized to be a major cause of people morbidity and mortality. A host of stress signals contribute to the pathogenesis of cardiovascular disorders. Deficiency of hydrogen sulfide (H2S) or nitric oxide (NO) coordinately plays essential roles in the development of cardiovascular diseases. Recent studies have shown that interaction between the two gaseostransmitters, H2S and NO, may give rise to nitroxyl (HNO), one-electron-reduced product of NO. HNO is found to exhibit a variety of biological and pharmacological properties including positive inotropy and cardiovascular protective effects, etc. In this review, recent progresses regarding HNO generation, detection, biochemical and pharmacological functions are discussed.

Calcium Ions Turn on the Fluorescence of Oxytetracycline for Sensitive and Selective Detection.

Herein, we report an interesting finding about the new application of oxytetracycline (OTC), as a fluorescent probe for the detection of calcium ion (Ca2+), which proved that it can offer an expeditious, highly sensitive, and selective detection method for Ca2+. Upon the addition of Ca2+, the fluorescence of OTC could be significantly enhanced with rapid response and high sensitivity, and achieved a good limit of detection as low as 125 nM in aqueous solution. The complex formed via Ca2+ coordinating to the hydroxyl group of OTC contributes to the fluorescence enhancement, which has been proved by several characterization methods including UV-vis analysis, binding constant determination, and fluorescence titration. The method avoided complexity for EDTA measurement of Ca2+ in running water as proposed previously. Taking advantage of good availability, stability and operability, the OTC was further successfully applied to the detection of Ca2+ in a real environment. Graphical Abstract.

Metal-Organic Framework Enhances Aggregation-Induced Fluorescence of Chlortetracycline and the Application for Detection.

The development of an analytical method for selective and sensitive detection of chlortetracycline (CTC), an often overused broad spectrum antibiotic, is important and challenging in environmental and health monitoring. This paper reports a zinc based metal-organic framework of pyromellitic acid (Zn-BTEC), which has been found to greatly enhance the aggregation-induced emission (AIE) of chlortetracycline. The unique emission response of CTC on Zn-BTEC has been extensively examined and applied for the sensitive detection of CTC on the basis of fluorescence intensity of AIE, and a limit of detection (LOD) was estimated to be 28 nM. A rational mechanism has been proposed based on the porous structure of Zn-BTEC, and the CTC molecules would defuse into the rigid MOF structure and assemble or aggregate, leading to fluorescence enhancement of CTC. Interestingly, the Zn-BTEC materials could discriminate CTC from other TC antibiotics with high selectivity. We have further demonstrated that the Zn-BTEC materials are successfully applied for the sensitive and selective determination of CTC in real samples of fish and urine.

Fluorescent MUA-stabilized Au nanoclusters for sensitive and selective detection of penicillamine.

In this study, we have developed a facile method for preparation of highly fluorescent Au nanoclusters (AuNCs) using 11-mercaptoundecanoic acid (MUA) as both the reducing and stabilizing agent. The as-prepared MUA functionalized AuNCs (MUA-AuNCs) have good water solubility, excellent photostability, and strong fluorescence emission at 610 nm with a quantum yield of 7.28% in water. The fluorescence of MUA-AuNCs was first quenched by copper ions through electron transfer, subsequently caused obvious restoration by competitive effect after adding penicillamine, making it a potential fluorescent sensor for penicillamine with a detection limit of 0.08 µM. Furthermore, the newly designed fluorescence "on-off-on" assay was explored for the measurement of penicillamine in complex real water and urine samples with satisfactory results.

A turn-on fluorescence probe for the selective and sensitive detection of fluoride ions.

The sensitive and selective determination of fluoride ions is particularly significant in environmental protection, food safety, and health care products. In this work, a highly selective turn-on fluorescent probe for fluoride ions has been synthesized by simply functionalizing fluorescent isophthalaldehyde with silicone-oxygen bonding. The selectivity of the probe is based on the specific reactivity of the silyl group toward fluoride ions in aqueous solution. The nucleophilic substitution reaction of fluoride ions triggers the cleavage of the Si-O bond to release a strongly fluorescent product, which can be used for the determination of fluoride ions by fluorescence intensity enhancement. The probe molecules are specifically responsive and highly selective for the fluoride anion over other relevant anions and cations. This fluorescent probe also shows high photostability and exhibits good sensitivity for fluoride ions, and the limit of detection is as low as 67 ppb. We have demonstrated its application for on-site sensitive determination of fluoride ions for environmental monitoring and protection.

Reversible Fluorescent Probe for Selective Detection and Cell Imaging of Oxidative Stress Indicator Bisulfite.

In this paper, we report a benzothiazole-functionalized cyanine fluorescence probe and demonstrate that it is selectively reactive to bisulfite, an intermediate indicator for oxidative stress. The selective reaction can be monitored by distinct ratiometric fluorescence variation favorable for cell imaging and visualization. The original probe can be regenerated in high yield through the elimination of bisulfite from the product by peroxides such as hydrogen peroxide, accompanied by fluorescence turning on at 590 nm, showing a potential application for the detection of peroxides. We successfully applied this probe for fluorescence imaging of bisulfite in cancer cells (MCF-7) treated with bisulfite and hydrogen peroxide as well as a selective detection limit of 0.34 µM bisulfite in aqueous solution.

Dual-emissive fluorescence measurements of hydroxyl radicals using a coumarin-activated silica nanohybrid probe.

This work reports a novel dual-emissive fluorescent probe based on dye hybrid silica nanoparticles for ratiometric measurement of the hydroxyl radical (˙OH). In the probe sensing system, the blue emission of coumarin dye (coumarin-3-carboxylic acid, CCA) immobilized on the nanoparticle surface is selectively enhanced by ˙OH due to the formation of a coumarin hydroxylation product with strong fluorescence, whereas the emission of red fluorescent dye encapsulated in the silica nanoparticle is insensitive to ˙OH as a self-referencing signal, and so the probe provides a good quantitative analysis based on ratiometric fluorescence measurement with a detection limit of 1.65 µM. Moreover, the probe also shows high selectivity for ˙OH determination against metal ions, other reactive oxygen species and biological species. More importantly, it exhibits low cytotoxicity and high biocompatibility in living cells, and has been successfully used for cellular imaging of ˙OH, showing its promising application for monitoring of intracellular ˙OH signaling events.

Visualizing gaseous nitrogen dioxide by ratiometric fluorescence of carbon nanodots-quantum dots hybrid.

A novel nanohybrid ratiometric fluorescence probe for on-site and visual determination of nitrogen dioxide (NO2) has been designed. The hybrid probe comprises blue-colored fluorescence carbon nanodots (CDs) and red-colored emission CdTe quantum dots (QDs). Such hybridized probe exhibits dual emission bands centered at 460 and 665 nm, respectively. The blue fluorescence of CDs is insensitive to the analyte, whereas the red emission of QDs is specifically quenched by the analyte, resulting in a distinguishable color change from orange-red to blue upon exposure to NO2. The limit of detection for nitrogen dioxide is estimated to be 19 nM in aqueous solution. More importantly, the nanohybrid probe has been successfully applied in visual detection of gaseous NO2 with a detection limit of 1 ppm, suggesting its potential application for NO2 sensing.

Manipulating the Surface Chemistry of Quantum Dots for Sensitive Ratiometric Fluorescence Detection of Sulfur Dioxide.

Herein, we report a novel approach to the rapid visual detection of gaseous sulfur dioxide (SO2) by manipulating the surface chemistry of 3-aminopropyltriethoxysilane (APTS)-modified quantum dots (QDs) using fluorescent coumarin-3-carboxylic acid (CCA) for specific reaction with SO2. The CCA molecules are attached to the surface amino groups of the QDs through electrostatic attraction, thus the fluorescence of CCA is greatly suppressed because of the formation of an ion-pair complex between the ATPS-modified QDs and CCA. Such an interaction is vulnerable to SO2 because SO2 can readily react with surface amino groups to form strong charge-transfer complexes and subsequently release the strongly fluorescent CCA molecules. The mechanism has been carefully verified through a series of control experiments. Upon exposure to different amounts of SO2, the fluorescent color of the nanoparticle-based sensor displays continuously changes from red to blue. Most importantly, the approach owns high selectivity for SO2 and a tolerance of interference, which enables the sensor to detect SO2 in a practical application. Using this fluorescence-based sensing method, we have achieved a visual detection limit of 6 ppb for gaseous SO2.

Graphene oxide supported gold nanoclusters for the sensitive and selective detection of nitrite ions.

The research progress on the selective and sensitive fluorescent detection of nitrite anions has greatly relied on the development of new fluorescent materials. Herein, a novel nanohybrid exhibiting dual emissions in blue and red wavelength ranges is fabricated for the rapid, on-site, and sensitive detection of nitrite anions. Such a nanohybrid system consists of graphene oxide (GO-C6NH2) and gold nanoclusters (HSA-Au NCs), which have been hybridized by electrostatic attraction and hydrogen bonding interaction. The nanohybrid has been completely characterized with respect to its fluorescence properties, photostability, and morphology. It has been found that red fluorescence of gold nanoclusters selectively responds to nitrite, whereas the blue fluorescence of graphene oxide remains constant, resulting in a distinct fluorescence color evolution from red to blue. Therefore, we apply the nanohybrid for the detection of nitrite anions by a fluorescence ratiometric method and estimate a detection limit of 46 nM, lower than the allowable level (∼21 µM) in drinking water set by U.S. Environmental Protection Agency. The method has been further validated by applying it for the determination of nitrite anions in real samples, including tap water, lake water, and cured meat.

Fluorescence signaling of hydrogen sulfide in broad pH range using a copper complex based on BINOL-benzimidazole ligands.

A weakly fluorescent complex derived from a binaphthol-benzimidazole ligand was designed and synthesized for hydrogen sulfide at different pH conditions. It was demonstrated that the probe showed the same reactivity to various hydrogen sulfide species in a broad range of pH values to generate highly fluorescent product through a displacement reaction mechanism, whereas the product's fluorescence spectrum exhibited a hypsochromic shift of ∼73 nm (2393 cm(-1)) as pH increased from neutral to basic, which can be used for distinguishing the various species of hydrogen sulfide. This turn-on fluorescence probe was highly selective and sensitive to hydrogen sulfide with a detection limit of 0.11 µM. It was then applied for evaluating the total content of sulfide (including hydrogen sulfide, hydrosulfide, and sulfide) as well as for the visual detection of gaseous H2S in air using a simple test paper strip.

Determination of gaseous sulfur dioxide and its derivatives via fluorescence enhancement based on cyanine dye functionalized carbon nanodots.

The development of convenient methods for sulfur dioxide and its derivatives analysis is critically important because SO2 causes worldwide serious environmental problems and human diseases. In this work, we show an unprecedented example of an energy-transfer-based fluorescence nanoprobe for selective and quantitative detection of SO2, through molecular engineering of the fluorescent carbon nanodots by a cyanine dye which have a unique reactivity to bisulfite, achieving a detection limit of 1.8 µM with a linear relationship (R(2) = 0.9987). The specific detection was not interfered with other potential coexisted species. In addition, the probe is demonstrated for the determination of SO2 gas in aqueous solution as well as for visually monitoring of SO2 gas in air. This nanomaterial based probe is easily prepared, fast responding, and thus potentially attractive for extensive application for the determination of SO2 and other similar air pollutants.

Fluorescence turn-on detection of gaseous nitric oxide using ferric dithiocarbamate complex functionalized quantum dots.

Functional quantum dots (QDs) grafted with ferric dithiocarbamate complex layers (QDs-Fe(III)(DTC)3) were fabricated and demonstrated to be selectively reactive to nitric oxide. The dithiocarbamate (DTC) was covalently conjugated to the amine-coated QDs by a condensation reaction of the carboxyl in DTC and the amino polymer in surface of QDs. The weak fluorescence of QDs-Fe(III)(DTC)3 was attributed to the energy transfer between CdSe/ZnS and Fe(III)(DTC)3 complex at the surface of the functionalized quantum dots. Nitric oxide could greatly switch on the fluorescence of QDs-Fe(III)(DTC)3 by displacing the DTC in the Fe(III)(DTC)3 accompanied by reducing Fe(III) to Fe(II), thus shutting off the energy transfer way. The limit of detection for nitric oxide was estimated to be 3.3 µM and the specific detection was not interfered with other reactive oxygen species. Moreover, the probe was demonstrated for the sensing of gaseous nitric oxide, and the visual detection limit was as low as 10 ppm, showing the potential for sensing nitric oxide by the naked eye.

Oxidative cleavage-based near-infrared fluorescent probe for hypochlorous acid detection and myeloperoxidase activity evaluation.

A near-infrared (NIR) fluorescent probe was synthesized and demonstrated to be highly selective in reaction with hypochlorous acid (HOCl), an endogenous reactive oxygen species (ROS) produced by myeloperoxidase in neutrophils. The reaction with HOCl resulted in the NIR fluorescence quenching at 774 nm and the absorbance decreasing at 710 nm, accompanied by the appearance of a new absorption band at 520 nm. The reaction mechanism was carefully examined and proposed to proceed by initial formation of chlorohydrins and subsequent degradation. This NIR fluorescent probe was successfully applied as a selective and sensitive indicator for HOCl on the basis of either colorimetry or fluorometry, which showed detection limits of 0.13 and 0.70 µM, respectively. In addition, the molecular probe was further demonstrated for NIR fluorescence imaging of HOCl in cells and for evaluating the enzymatic activity of myeloperoxidase in the HOCl generation by measuring absorbance change.

Selective fluorescence turn-on and ratiometric detection of organophosphate using dual-emitting Mn-doped ZnS nanocrystal probe.

Semiconductor nanocrystals (NCs) possess unique photoluminescent properties which can be used to design fluorescence probes for chemo/biosensing applications. Several have recently emerged that offer excellent turn-on or ratiometric fluorescence chemosensory protocols by sophisticated procedures, but it has been challenging to realize all of these advantages in a single construct. Herein, we develop an intrinsic dual-emitting Mn-doped ZnS nanocrystal-based probe that achieves this goal with turn-on and ratiometric fluorescence response for the determination of organophosphate (diethylphosphorothioate, DEP). The probe relies on the modification of dopamine dithiocarbamate on the surface of NCs and the modulation of dual emission through a photoinduced electron transfer process, which makes use of red fluorescence of Mn(2+) ions doped in the NCs as specific recognition for the target analyte and blue defect emission of the NCs as stable internal reference. In presence of DEP, the red emission of the probe is thus enhanced by switching off the electron transfer pathway, while the blue emission is almost unchanged. With the addition of different amounts DEP, the two emission intensity ratios gradually vary and display color changes from dark-blue to purple to red. Thus, this method generates turn-on and ratiometric fluorescence signals for quantitative and visual detection of the analyte. Significantly, the dual-emitting probe has been used to fabricate paper-based test strips for visual detection of DEP residues, which validate the method for its rapid, on-site, and visual identification.

Efficient ratiometric fluorescence probe based on dual-emission quantum dots hybrid for on-site determination of copper ions.

Of various chemosensory protocols, the color change observed by the naked eye is considered to be a conceivable and on-site way to indicate the presence of an analyte. We herein designed a ratiometric fluorescence probe by hybridizing dual-emission quantum dots (QDs) and demonstrated its efficiency for on-site visual determination of copper ions. The hybrid probe comprises two sizes of cadmium telluride QDs emitting red and green fluorescence, respectively, in which the red-emitting ones are embedded in silica nanoparticles and the green-emitting ones are covalently linked onto the surface. The fluorescence of the embedded QDs is insensitive to the analyte, whereas the green emissive QDs are functionalized to be selectively quenched by the analyte. Upon exposure to different amounts of copper ions, the variations of the dual emission intensity ratios display continuous color changes from green to red, which can be clearly observed by the naked eye. The limit of detection for copper is estimated to be 1.1 nM, much lower than the allowable level of copper (~20 µM) in drinking water set by U.S. Environmental Protection Agency. The probe is demonstrated for the determination of copper ions in lake water and mineral water samples, especially for visually monitoring copper residues on herb leaves. This prototype ratiometric probe is simple, fully self-contained, and thus potentially attractive for visual identification without the need for elaborate equipment.