Enhancing the Antimicrobial Effect of Ozone with Mentha piperita Essential Oil.

This study aimed to obtain and analyse Mentha piperita essential oil (MpEO) for the prospect of being used as an enhancement agent for the antimicrobial potential of ozone against gram-positive and gram-negative bacteria and fungi. The research was done for different exposure times, and it gained time-dose relationships and time-effect correlations. Mentha piperita (Mp) essential oil (MpEO) was obtained via hydrodistillation and further analysed by using GC-MS. The broth microdilution assay was used to determine the strain inhibition/strain mass growth by using spectrophotometric optical density reading (OD). The bacterial/mycelium growth rates (BGR/MGR) and the bacterial/mycelium inhibition rates (BIR/MIR) after ozone treatment in the presence and absence of MpEO on the ATTC strains were calculated; the minimum inhibition concentration (MIC) and statistical interpretations of the time-dose relationship and specific t-test correlations were determined. The effect of ozone on the following tested strains at maximum efficiency was observed after 55 s of single ozone exposure, in order of effect strength: S. aureus > P. aeruginosa > E. coli > C. albicans > S. mutans. For ozone with the addition of 2% MpEO (MIC), maximum efficacy was recorded at 5 s for these strains, in order of effect strength: C. albicans > E. coli > P. aeruginosa > S. aureus > S. mutans. The results suggest a new development and affinity regarding the cell membrane of the different microorganisms tested. In conclusion, the use of ozone, combined with MpEO, is sustained as an alternative therapy in plaque biofilm and suggested as helpful in controlling oral disease-causing microorganisms in medicine.

In Vitro Assessment of the Cytotoxic and Antiproliferative Profile of Natural Preparations Containing Bergamot, Orange and Clove Essential Oils.

Medicinal plants and essential oils (EOs), in particular, were intensively studied in recent years as viable alternatives for antiproliferative chemical synthetic agents. In the same lines, the present study focuses on investigating the effects of natural preparations (emulsions) based on EOs obtained from Citrus bergamia Risso (bergamot-BEO), Citrus sinensis Osbeck (orange-OEO), and Syzygium aromaticum Merill et L. M. Perry (clove-CEO) on different healthy (human immortalized keratinocytes-HaCaT and primary human gingival fibroblasts-HGF) and human tumor cell lines (human melanoma-A375 and oral squamous carcinoma-SCC-4) in terms of the cells' viability and cellular morphology. The obtained results indicate that the CEO emulsion (ECEO) induced a dose-dependent cytotoxic in both healthy (HaCaT and HGF) and tumor (A375 and SCC-4) cells. OEO emulsion (EOEO) increased cell viability percentage both for HaCaT and A375 cells and had an antiproliferative effect at the highest concentration in HGF and SCC-4 cells. BEO emulsion (EBEO) decreased the viability percentage of SCC-4 tumor cells. By associating OEO with CEO as a binary mixture in an emulsified formulation, the inhibition of tumor cell viability increases. The E(BEO/OEO) binary emulsion induced an antiproliferative effect on oral health and tumor cells, with a minimal effect on skin cells. The non-invasive tests performed to verify the safety of the test compound's emulsions at skin level indicated that these compounds do not significantly modify the physiological skin parameters and can be considered safe for human skin.

The Antioxidant Effect of Curcumin and Rutin on Oxidative Stress Biomarkers in Experimentally Induced Periodontitis in Hyperglycemic Wistar Rats.

BACKGROUND: There is a growing interest in the correlation between antioxidants and periodontal disease. In this study, we aimed to investigate the effect of oxidative stress and the impact of two antioxidants, curcumin and rutin, respectively, in the etiopathology of experimentally induced periodontitis in diabetic rats. METHODS: Fifty Wistar albino rats were randomly divided into five groups and were induced with diabetes mellitus and periodontitis: (1) (CONTROL)-control group, (2) (DPP)-experimentally induced diabetes mellitus and periodontitis, (3) (DPC)-experimentally induced diabetes mellitus and periodontitis treated with curcumin (C), (4) (DPR)-experimentally induced diabetes mellitus and periodontitis treated with rutin (R) and (5) (DPCR)-experimentally induced diabetes mellitus and periodontitis treated with C and R. We evaluated malondialdehyde (MDA) as a biomarker of oxidative stress and reduced glutathione (GSH), oxidized glutathione (GSSG), GSH/GSSG and catalase (CAT) as biomarkers of the antioxidant capacity in blood harvested from the animals we tested. The MDA levels and CAT activities were also evaluated in the gingival tissue. RESULTS: The control group effect was statistically significantly different from any other groups, regardless of whether or not the treatment was applied. There was also a significant difference between the untreated group and the three treatment groups for variables MDA, GSH, GSSG, GSH/GSSG and CAT. There was no significant difference in the mean effect for the MDA, GSH, GSSG, GSH/GSSG and CAT variables in the treated groups of rats with curcumin, rutin and the combination of curcumin and rutin. CONCLUSIONS: The oral administration of curcumin and rutin, single or combined, could reduce the oxidative stress and enhance the antioxidant status in hyperglycemic periodontitis rats.

Natural Preparations Based on Orange, Bergamot and Clove Essential Oils and Their Chemical Compounds as Antimicrobial Agents.

Since ancient times complementary therapies have been based on the use of medicinal plants, natural preparations and essential oils in the treatment of various diseases. Their use in medical practice is recommended in view of their low toxicity, pharmacological properties and economic impact. This paper aims to test the antimicrobial effect of natural preparation based on clove, orange and bergamot essential oils on a wide range of microorganisms that cause infections in humans including: Streptococcus pyogenes, Staphylococcus aureus, Shigella flexneri, Candida parapsilosis, Candida albicans, Pseudomonas aeruginosa, Escherichia coli, Salmonella typhimurium and Haemophilus influenza. Three natural preparations such as one-component emulsions: clove (ECEO), bergamote (EBEO), and orange (EOEO), three binary: E(BEO/CEO), E(BEO/OEO), E(CEO/OEO) and a tertiary emulsion E(OEO/BEO/CEO) were obtained, characterized and tested for antimicrobial effects. Also, the synergistic/antagonistic effects, generated by the presence of the main chemical compounds, were studied in order to recommend a preparation with optimal antimicrobial activity. The obtained results underline the fact that the monocomponent emulsion ECEO shows antimicrobial activity, while EOEO and EBEO do not inhibit the development of the analyzed strains. In binary or tertiary emulsions E(BEO/CEO), E(CEO/OEO) and E(OEO/ BEO/CEO) the antimicrobial effect of clove oil is potentiated due to the synergism exerted by the chemical compounds of essential oils.

Solid Polymeric Nanoparticles of Albendazole: Synthesis, Physico-Chemical Characterization and Biological Activity.

Albendazole is a benzimidazole derivative with documented antitumor activity and low toxicity to healthy cells. The major disadvantage in terms of clinical use is its low aqueous solubility which limits its bioavailability. Albendazole was incorporated into stable and homogeneous polyurethane structures with the aim of obtaining an improved drug delivery system model. Spectral and thermal analysis was used to investigate the encapsulation process and confirmed the presence of albendazole inside the nanoparticles. The in vitro anticancer properties of albendazole encapsulated in polyurethane structures versus the un-encapsulated compound were tested on two breast cancer cell lines, MCF-7 and MDA-MB-231, in terms of cellular viability and apoptosis induction. The study showed that the encapsulation process enhanced the antitumor activity of albendazole on the MCF-7 and MDA-MB-23 breast cancer lines. The cytotoxic activity manifested in a concentration-dependent manner and was accompanied by changes in cell morphology and nuclear fragmentation.

Correlations on Phenolic Screening Related to In Vitro and In Ovo Assessment of Ocimum basilicum L. Hydro-Alcoholic Extracts Used as Skin Active Ingredient.

The current study was aimed to evaluate the phenolic composition parameters of two hydro-alcoholic extracts of Ocimum basilicum L. (OB) obtained from the aerial part (without leaves) and leaves, in order to determine their contribution to the antioxidant activity (AOA). Both hydro-alcoholic extracts have proven to be rich in polyphenolic compounds, flavonoids, flavonols and tannins. Therefore, the leaves' extracts reveal an inhibition percentage of 89%, almost comparable with the standard reference (95%). To complete the toxicological profile, the study also assessed the potential cytotoxicity of basil hydro-alcoholic extracts on immortalized human keratinocytes (HaCaT), skin human fibroblasts (1BR3), mice epidermis (JB6Cl41-5a) and primary human melanocytes (HEMa) cells, correlated to A375 antitumor in vitro activity. The extracts did not induce significant cytotoxic effect on any of the selected normal cell lines but showed relevant activity on A375 cells. Considering the low values obtained regarding the irritative effects in the chorionallantoic membrane of the egg on blood vessels, we can emphasize that both extracts can be considered as biocompatible ingredients. Regarding the potential activity of hydro-alcoholic extracts on human skin, the decrease of erythema values after the application of extracts was a relevant observation which indicates the anti-inflammatory potential of Ocimum basilicum L.

Alternative treatment approach for anterior subgingival dental lesions: Forced eruption using attractive magnets.

This article reports the use of a minimally invasive technique to address a challenging clinical problem in the esthetic zone. The clinical steps taken to achieve forced eruption by 1.5-2.0 mm of a maxillary central incisor that presented minimal clinical crown because of caries are described in detail. This subsequently allowed the successful placement of a crown. The tooth was extruded by forces generated between 2 neodymium-iron-boron magnets. One was affixed to the palatal surface of the tooth, and the other was embedded in a thermoformed splint. Weekly circumferential supracrestal fiberotomies were performed to enable extrusion without osseous migration. The extrusion was clinically and radiographically detectable after 6 weeks of magnetic force application. After an initial retention period of 8 weeks, the maxillary incisors were restored with lithium-disilicate ceramic veneers and crowns.

Romanian Wormwood (Artemisia absinthium L.): Physicochemical and Nutraceutical Screening.

Artemisia species are used worldwide for their antioxidant, antimicrobial and anti-inflammatory properties. This research was designed to investigate the phytochemical profile of two ethanolic extracts obtained from leaves and stems of A. absinthium L. as well as the biological potential (antioxidant activity, cytotoxic, anti-migratory and anti-inflammatory properties). Both plant materials showed quite similar thermogravimetric, FT-IR phenolic profile (high chlorogenic acid) with mild antioxidant capacity [ascorbic acid (0.02-0.1) > leaves (0.1-2.0) > stem (0.1-2.0)]. Alcoholic extracts from these plant materials showed a cytotoxic effect against A375 (melanoma) and MCF7 (breast adenocarcinoma) and affected less the non-malignant HaCaT cells (human keratinocytes) at 72 h post-stimulation and this same trend was observed in the anti-migratory (A375, MCF7 > HaCat) assay. Lastly, extracts ameliorated the pro-inflammatory effect of TPA (12-o-tetradecanoylphorbol-13-acetate) in mice ears, characterized by a diffuse neutrophil distribution with no exocytosis or micro-abscesses.

Finite element analysis of the mechanical behavior of 3D printed orthodontic attachments used in aligner treatment.

The composite attachment loss during orthodontic clear aligner therapy is an adverse event that commonly happens in clinical practice and can affect the overall outcome and length of treatment. The aim of our research is to provide a basis for the further study of an innovative digital protocol and application method for orthodontic aligner attachments. Two 3D models were designed, one based on the proposed protocol and the other on the conventional method for aligner attachment application. Four attachment shapes were used to identify the maximum values for the von Mises equivalent stresses, the maximum displacements values and the areas in which these values were recorded through FEM analysis. The results of the mechanical simulation show lower values of von Mises stress recorded in the 3D printed attachments assemblies, independent of their shape, when simulated under the same boundary and load conditions. The trapezoidal prism shaped 3D printed model has a 3.7 times smaller displacement value (0.088 [mm]) compared to the adhesive resin model (0.326 [mm]). In conclusion, the proposed protocol for aligner attachments and the introduction of innovative materials is a promising method of solving conventional attachment problems in current orthodontic treatments.

Comprehensive in vitro and in ovo assessment of cytotoxicity: Unraveling the impact of sodium fluoride, xylitol, and their synergistic associations in dental products.

Over the past several decades, dental health products containing fluoride have been widely employed to mitigate tooth decay and promote oral hygiene. However, concerns regarding the potential toxicological repercussions of fluoride exposure have incited continuous scientific inquiry. The current study investigated the cytotoxicity of sodium fluoride (NaF) and xylitol (Xyl), both individually and in combination, utilizing human keratinocyte (HaCaT) and osteosarcoma (SAOS-2) cell lines. In HaCaT cells, NaF decreased proliferation in a concentration-dependent manner and induced apoptosis-related morphological changes at low concentrations, whereas Xyl exhibited dose-dependent cytotoxic effects. The combination of NaF and Xyl reduced cell viability, particularly at higher concentrations, accompanied by apoptosis-like morphological alterations. Sub-cytotoxic NaF concentrations (0.2%) significantly affected caspase activity and the expression of pro-apoptotic genes. Conversely, Xyl demonstrated no discernible effect on these biological parameters. In SAOS-2 cells, NaF increased proliferation at high concentrations, contrasting with Xyl's concentration-dependent cytotoxic effects. The combination of NaF and Xyl had a minimal impact on cell viability. Sub-cytotoxic NaF concentrations did not influence caspase activity or gene expression, while Xyl induced dose-dependent morphological alterations, increased caspase activity, and upregulated pro-apoptotic gene expression. In ovo experiments on the chorioallantoic membrane (CAM) revealed that only NaF induced irritant effects, suggesting potential vascular adverse outcomes. This study advocates for the combined use of NaF and Xyl, highlighting their cytotoxicity benefits in healthy cells while maintaining safety considerations for tumor cells.

FEM Analysis of Individualized Polymeric 3D Printed Guide for Orthodontic Mini-Implant Insertion as Temporary Crown Support in the Anterior Maxillary Area.

Either due to trauma, extraction or congenital factors, the absence of teeth has aesthetic, functional, financial and psychological consequences. The aim of the current study is to assess an individualized polymeric 3D printed digitally planned surgical guide designed to achieve precision and predictability in non-standard mini-implant orthodontic cases. Twenty-seven patient records with missing anterior teeth were selected from the database of a private clinic in Timisoara, Romania. Based on the analysis of the cases included in the research, a surgical guide for the insertion of mini-implants as provisional crown support was designed. An FEM simulation was performed using the Abaqus numerical analysis software. Finite element simulation revealed the maximum displacements and stresses that occur in the surgical guide. Mini-implant supported provisional crowns can be a simple and low-cost method to increase patient self-esteem and compliance with the orthodontic treatment. Computer aided mechanical simulation is a useful tool in analyzing different polymeric surgical guide designs before being used in clinical situations in order to avoid failure.

Age-Related Quality of Life and Psychosocial Impact of Chin Asymmetry in Adolescents and Young Adults Undergoing Orthodontic and Orthognathic Correction.

Craniofacial asymmetry can have significant psychosocial implications, affecting the quality of life in adolescents and young adults. This study aimed to assess the impact of age and complexity of craniofacial asymmetry on quality of life and psychosocial outcomes in patients undergoing orthodontic and orthognathic correction. A cross-sectional study was conducted on 149 patients aged 13-26 years with moderate or severe craniofacial asymmetry that had a gnathion deviation higher than 2 mm, according to the American Association of Orthodontists. Participants were divided into three groups: teenagers (n = 53), adults (n = 46), and a control group (n = 50) with relative craniofacial asymmetry. Quality of life and psychosocial impacts were evaluated using validated questionnaires that measure health-related quality of life (SF-36), body image satisfaction and self-acceptance (BIQLI), anxiety and depression levels (HADS), and perceived stress (PSS-10). These tools provided an encompassing appraisal of the psychological and social implications associated with craniofacial asymmetry before and six months after orthodontic and orthognathic correction. Before the intervention, adults had higher mental health scores compared to teenagers (p = 0.037). At the 6-month follow-up, no significant differences in mental health scores were observed between the two groups (p = 0.121). BIQLI results showed significant differences in satisfaction with appearance and self-acceptance between teenagers and adults, both before intervention (p = 0.045 and p = 0.051, respectively) and at six months (p = 0.062 and p = 0.031, respectively). HADS results showed significant differences in anxiety levels before intervention (p = 0.039) but not at six months (p = 0.133). PSS-10 results showed no significant differences in perceived stress between the groups. In conclusion, this study demonstrates that craniofacial asymmetry significantly impacts the quality of life and psychosocial well-being of adolescents and young adults. Specifically, teenagers, as compared to young adults, reported lower satisfaction with their appearance and lower self-acceptance before intervention, underscoring the profound psychosocial challenges that adolescents with craniofacial asymmetry may experience. These age-related differences underscore the importance of tailored interventions to address unique psychosocial needs at different developmental stages.

Male and Female Discrepancies in Anxiety, Depressive Symptoms, and Coping Strategies among Orthognathic Patients: A Cross-Sectional Analysis.

With an increasing understanding of the differences between men and women's psychological experiences, this study aimed to probe the sex-based differences in anxiety, depressive symptoms, and coping strategies among orthognathic patients. The study hypothesis was that female patients would show higher levels of anxiety and depressive symptoms than males, and that coping mechanisms would differ between male and female sexes. A cross-sectional design was adopted, examining orthognathic patients from the Department of Oral and Maxillo-Facial Surgery at the Emergency Clinical Municipal Hospital in Timisoara, Romania, from 2020 to 2023. Eligible participants (18+ years with no prior orthognathic treatment) completed a comprehensive online questionnaire 6 weeks before scheduled surgery. This was composed of validated self-report instruments comprising the SF-36, GAD-7, and the PHQ-9, and the COPE-60, along with additional sociodemographic data. Of the 127 orthognathic patients analyzed (68 men and 59 women, aged 18 to 65 years, mean age 32), men rated their physical health status slightly better on the SF-36 scale. However, the most notable difference was in mental health, with females scoring higher on both the PHQ-9 (indicative of depression) and the GAD-7 (indicative of anxiety) scales. Specifically, female participants exhibited average PHQ-9 scores 1.8 points higher and GAD-7 scores 1.5 points higher than their male counterparts. Coping mechanisms also varied: 42% of male patients primarily employed "Disengagement" strategies, while 58% of females predominantly used "Engagement" and "Emotion Focused" strategies. Emotion-focused coping was associated with a 1.6-fold increased risk of depressive symptoms. Sex differences play a crucial role in the psychological experiences of orthognathic patients, evident in anxiety and depression levels, perceived health status, and coping strategies. This underlines the importance of sex-tailored psychological support in the preoperative phase for orthognathic surgery patients.

Cephalometric assessment regarding craniocervical posture in orthodontic patients.

A major factor that contributes to dental malocclusions is represented by the positioning of the mandible. Considering the existing interconnections between the craniocervical and craniomandibular systems it is interesting to assess how changes in one system can influence the other, thus establishing a pattern in terms of certain cephalometric landmarks that orthodontists could consider when diagnosing and evaluating an orthodontic case. Therefore, the aim of this study was to investigate the connections between cervical posture, head position, hyoid bone position in orthodontic patients with different skeletal patterns. 45 lateral cephalometric radiographs were analyzed. Skeletal class and vertical growth were the main elements that were considered when classifying patients. Craniofacial and Cervical landmarks were determined on the cephalograms, from which lines and angles resulted which were considered relevant in our study. Correlations between cephalometric variables of the patients were determined. there were some statistically significant changes identified concerning craniocervical posture and hyoid bone position between the patients in the following parameters: H-Rgn, OPT/HOR, CVT/HOR, OPT/SN, CVT/SN, H-SN. The results obtained allowed us to conclude that there were some differences at the skeletal level of the sample of patients studied. The findings are indicating that there is a close relationship between, mandible position, cervical- and head posture and the hyoid bone. The information obtained in this study could help to better understand the development of malocclusions, and to improve the orthodontic diagnostic and treatment plan.

Nicotine Exerts Cytotoxic Effects in a Panel of Healthy Cell Lines and Strong Irritating Potential on Blood Vessels.

The use of tobacco products is a major global public health issue, as it is the leading cause of preventable death worldwide. In addition, nicotine (NIC) is a key component of electronic and conventional cigarettes. Although nicotine's addictive potential is well known, its health effects are not entirely understood. Thus, the main objective of the present study was to evaluate its toxicological profile both in vitro, at the level of three healthy cell lines, and in ovo, at the level of the chorioallantoic membrane. Five different concentrations of nicotine were used in keratinocytes, cardiomyocytes, and hepatocytes for the purpose of evaluating cell viability, cell morphology, and its impact on nuclei. Additionally, the hen's egg test on the chorioallantoic membrane (HET-CAM) method was used to assess the biocompatibility and irritant potential of the chorioallantoic membrane. Across all cell lines studied, nicotine was proven to be significantly damaging to cell viability, with the highest concentration tested resulting in less than 2% viable cells. Moreover, the morphology of cells changed dramatically, with alterations in their shape and confluence. Nicotine-induced cell death appears to be apoptotic, based on its impact on the nucleus. In addition, nicotine was also found to have a very strong irritating effect on the chorioallantoic membrane. In conclusion, nicotine has an extremely strong toxicological profile, as demonstrated by the drastic reduction of cell viability and the induction of morphological changes and nuclear alterations associated with cellular apoptosis. Additionally, the HET-CAM method led to the observation of a strong irritating effect associated with nicotine.

Space Maintainers Used in Pediatric Dentistry: An Insight of Their Biosecurity Profile by Applying In Vitro Methods.

Space maintainers have presented an increased interest due to their chemical composition which influences the electrochemical and electrolytic processes of the oral cavity, leading to important biological activity. The present study was purported to evaluate the biological in vitro activity of three types of space maintainers (S1, S2, and S3, differing from each other in terms of metal composition) used in pediatric dentistry, in terms of their antimicrobial effect and biosecurity profile using two types of keratinocytes (PGK: primary gingival keratinocytes, and HaCaT: human immortalized keratinocytes) by assessing the morphology, viability, cytotoxicity, and gene expression of the cells. Statistical differences were calculated by the one-way ANOVA test, followed by Tukey's post-test. Antimicrobial screening highlighted a dilution-dependent influence that, in the case of all strains tested, did not show inhibition or stimulation of bacterial growth. The in vitro evaluations revealed that the test samples did not induce important cytotoxic potential on both keratinocyte cell lines (HaCaT and PGK), with the cells manifesting no morphological alteration, a good viability rate (above 90%: PGK-S1, * p < 0.05), and a low cytotoxic activity (less than 11%: PGK, S1 *** p < 0.001 and S3 * p < 0.05; HaCaT, S1 ** p < 0.01). The data obtained in this study highlight the fact that the samples analyzed are biocompatible and do not develop the growth of the studied bacteria or encode the gene expression of primary and immortalized keratinocytes.

Development and Characterization of Fe3O4@Carbon Nanoparticles and Their Biological Screening Related to Oral Administration.

The current study presents the effect of naked Fe3O4@Carbon nanoparticles obtained by the combustion method on primary human gingival fibroblasts (HGFs) and primary gingival keratinocytes (PGKs)-relevant cell lines of buccal oral mucosa. In this regard, the objectives of this study were as follows: (i) development via combustion method and characterization of nanosized magnetite particles with carbon on their surface, (ii) biocompatibility assessment of the obtained magnetic nanoparticles on HGF and PGK cell lines and (iii) evaluation of possible irritative reaction of Fe3O4@Carbon nanoparticles on the highly vascularized chorioallantoic membrane of a chick embryo. Physicochemical properties of Fe3O4@Carbon nanoparticles were characterized in terms of phase composition, chemical structure, and polymorphic and molecular interactions of the chemical bonds within the nanomaterial, magnetic measurements, ultrastructure, morphology, and elemental composition. The X-ray diffraction analysis revealed the formation of magnetite as phase pure without any other secondary phases, and Raman spectroscopy exhibit that the pre-formed magnetic nanoparticles were covered with carbon film, resulting from the synthesis method employed. Scanning electron microscopy shown that nanoparticles obtained were uniformly distributed, with a nearly spherical shape with sizes at the nanometric level; iron, oxygen, and carbon were the only elements detected. While biological screening of Fe3O4@Carbon nanoparticles revealed no significant cytotoxic potential on the HGF and PGK cell lines, a slight sign of irritation was observed on a limited area on the chorioallantoic membrane of the chick embryo.

A survey to assess the incidence of Down syndrome risk in rural southwestern Romania.

Despite the significant evolution in recent years in the medical field, many fetal conditions that can be detected in the early stages, remain a social and economic burden due to a lack of diagnostic and treatment programs. The main objective of the present study was to realize a screening program related to the early detection of Down syndrome, by analyzing biochemical and imaging markers, in women from the rural areas of Southwest Romania. Accordingly, data from 269 pregnant women were taken into evaluation for maternal age, maternal weight, smoking and diabetic statuses, along with ultrasound measurements that were performed to establish fetal nuchal translucency (FNT) and biochemical analysis of free ß-human chorionic gonadotropin (ß-hCG) and pregnancy-associated plasma protein (PAPP-A). Patients at high risk for trisomy 21 (≥1:250) were counseled and the optimal protocol was established for each case. Of the 269 patients studied, 5.6% were included in the risk group based on ß-hCG-associated MoM (multiple median approaches) analysis, sonographic measurements and maternal age correlation. Specifically, 60% of patients at risk presented a ß-hCG MoM value >1.5 and 20% of patients at risk presented a value ≤0.5 for PAPP-A MoM, and the average maternal age was 33. Measurement of FNT and serum markers, together with associated MoM intervals, was not sufficient to establish the diagnosis of trisomy 21 and to make a risk group inclusion. In summary, the association between sonographic measurements and serum marker values, together with maternal age, are predetermined and indispensable conditions for the most accurate classification in a high-risk group.

Comparative Toxicological In Vitro and In Ovo Screening of Different Orthodontic Implants Currently Used in Dentistry.

Selecting the most biocompatible orthodontic implant available on the market may be a major challenge, given the wide array of orthodontic devices currently available on the market. The latest scientific data have suggested that in vitro evaluations using oral cell lines provide reliable data regarding the toxicity of residual particles released by different types of orthodontic devices. In this regard, the in vitro biocompatibility of three different commercially available implants (stainless steel and titanium-based implants) was assessed. METHODS: As an in vitro model, human gingival fibroblasts (HGFs) were employed to evaluate the cellular morphology, cell viability, and cytotoxicity by means of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays at 24 h and 72 h post-exposure to test implants. RESULTS: The results correlate the composition and topography of the implant surface with biological experimental evaluations related to directly affected cells (gingival fibroblasts) and toxicological results on blood vessels (hen's egg test-chorioallantoic membrane (HET-CAM) assay). The stainless steel implant exhibits a relative cytotoxicity against HGF cells, while the other two samples induced no significant alterations of HGF cells. CONCLUSION: Among the three test orthodontic implants, the stainless steel implant induced slight cytotoxic effects, thus increased vigilance is required in their clinical use, especially in patients with high sensitivity to nickel.

A Custom-Made Orthodontic Mini-Implant-Effect of Insertion Angle and Cortical Bone Thickness on Stress Distribution with a Complex In Vitro and In Vivo Biosafety Profile.

BACKGROUND: Orthodontic mini-implant failure is a debatable subject in clinical practice. However, the most important parameter to evaluate the success rate of mini-implant is the primary stability, which is mainly influenced by cortical bone thickness (CBT) and insertion angle. MATERIALS AND METHODS: Three-dimensional finite element models of the maxilla were created and a custom-made, self-drilling, tapered mini-implant was designed. For the pull-out test, 12 simulations were performed, sequentially increasing the thickness of the cortical bone (1, 1.5 and 2 mm) and the insertion angle (30°, 60°, 90°, 120°). For the force analysis, 24 simulations were performed using an experimental orthodontic traction force of 2 N both in the horizontal and vertical axis. RESULTS: Insertion angle and CBT have significant impact on force reaction values (p < 0.05). Cortical bone stress had the lowest value when the mini-implant had a 30° insertion angle and the highest value when the implant had a 120° insertion angle, while the CBT was 1 mm. Cortical bone stress had the lowest value with an insertion angle of 90° and the highest value when the implant was inserted at an angle of 30°, while the CBT was 2 mm independent of the force direction. Regarding the biosafety profile of the mini-implant alloy, the present results reveal that the custom-made mini-implant presents good biocompatibility. CONCLUSIONS: When the CBT is reduced, we recommend inclined insertion while, when the CBT is appropriate, perpendicular insertion is advised.