RESUMO
Regular tandem microlens arrays are well described and widely used for beam shaping and homogenization. Applying absorbing slides between the entrance and exit lenslets and channel-wise variation of the slides' shape and size allows flexible control of the beam's intensity profile and silhouette. The downside of absorbing slides is a significant transmission loss, limiting the achievable level of system efficiency. This work describes a more efficient method for micro-optical beam shaping with maskless irregular microlens arrays (iMLA). The iMLAs are completely absorption-free elements, enhancing the overall efficiency of the optical system. We describe basic design rules for iMLAs, including stray-light suppression, tolerancing, and modeling under consideration of manufacturing imperfections.
RESUMO
In this work, we conduct experimental investigations of transverse mode instabilities (TMI) in a large mode area ultra-low numerical aperture polarization maintaining fiber amplifier. This fiber is few mode in the slow-axis (conventional operation mode), but single mode in the fast-axis. We test the stability of the output beam by changing the input polarization angle and systematically investigate the transverse mode instability threshold in the two principal polarization axes. The lowest TMI threshold at 300 W was found when the input polarization angle was aligned parallel to the slow-axis. Detuning the input polarization angle from the slow-axis led to increased TMI thresholds. For input polarization angle of 90° (parallel to the fast-axis), the output signal was stable up to 475 W and further scaling was limited by the available pump power. However, for fast-axis operation a lower polarization ratio compared to slow-axis operation was observed as well as an unexpected static energy transfer from the fast-axis into the slow-axis above 400 W.
RESUMO
The effect of transverse mode instability (TMI) poses a fundamental obstacle for a further scaling of diffraction-limited, high-power fiber laser systems. In this work we present a theoretical and experimental study on the mitigation of TMI by modal birefringence in a polarization maintaining (PM) fiber. With the help of comprehensive simulations, we show that the thermally-induced refractive index grating responsible for TMI can be modified and washed out when light is coupled with a polarization input angle detuned from the main axes of the fiber. To confirm the theoretical predictions, we have designed and manufactured an Yb-doped large-mode-area PM fiber. Using this fiber, we have systematically investigated the dependence of the TMI threshold on the polarization input angle of the seed laser. We experimentally demonstrate that when the polarization input angle of the seed is aligned at 50° with respect to the slow-axis, the TMI threshold increases by a factor of 2, verifying the theory and the numerical simulations. A high speed polarization mode-resolved analysis of the output beam is presented, which reveals that at the onset of TMI both polarization axes fluctuates simultaneously.
RESUMO
To increase the performance of optical systems, a good antireflective coating is required to ensure low reflectance and high transmittance of optical surfaces. Further problems, such as fogging that causes light scattering, negatively affect the image quality. This implies that other functional properties are also required. Presented here is a highly promising combination of an antireflective double nanostructure on top of an antifog coating with long-term stable properties, generated in a commercial plasma-ion-assisted coating chamber. It is demonstrated that the nanostructures do not affect the antifog properties and can be successfully used for many applications.
RESUMO
Because of its high sensitivity to even small objects and the quick measurement principle, angle-resolved scattering (ARS) measurements exhibit a promising potential as a rapid analysis tool for bacterial cells at small sample sizes and very low numbers of cells. In this study, investigations on scattered light from various bacterial cell samples revealed applicability down to single cell levels, which is a huge benefit compared to conventional methods that depend on time-consuming cellular growth over several hours or even days. With the proposed setup and data analysis method, it is possible to detect scatter differences among cell types, together with the cell concentration.
Assuntos
Luz , Espalhamento de Radiação , Carga BacterianaRESUMO
We present a coherently combined femtosecond fiber chirped-pulse-amplification system based on a rod-type, ytterbium-doped, multicore fiber with 4 × 4 cores. A high average power of up to 500â W (after combination and compression) could be achieved at 10â MHz repetition rate with excellent beam quality. Additionally, < 500â fs pulses with up to 600â µJ of pulse energy were also realized with this setup. This architecture is intrinsically power scalable by increasing the number of cores in the fiber.
RESUMO
The fabrication of highly reflective aluminum coatings is still an important part of current research due to their high intrinsic reflectivity in a broad spectral range. By using thin seed layers of Cu, CuOx, Cr, CrOx, Au, and Ag, the morphology of sputtered (unprotected) aluminum layers and, consequently, their reflectance can be influenced. In this long-term study, the reflectance behavior was measured continuously using spectrophotometry. Particular seed layer materials enhance the reflectance of aluminum coatings significantly and reduce their long-term degradation. Combining such seed layers with evaporation processes and suitable protective layers could further increase the reflectance of aluminum coatings.
RESUMO
We report a high brightness cascaded Stokes diamond Raman laser with a diffraction limited beam quality pumped by an Yd-doped fiber laser. The Raman laser operated at 1477 nm and reached an output power of 63 W with 214 W pump power in continuous-wave mode. Conversion efficiency over 30% was achieved using a single pump pass concentric cavity that was highly resonant at the first Stokes and had high outcoupling at the second Stokes (45%). Thermal limitations were investigated as well as the temporal behavior of the first and second Stokes intra-cavity power.
RESUMO
The structural, optical, and mechanical properties of TiO2 nanolaminate films grown by plasma-enhanced atomic layer deposition are discussed. Several TiO2/Al2O3 and TiO2/SiO2 compositions have been investigated to study the effect of the relative number of ALD oxide cycles on the film properties to obtain a high refractive index coating with low optical losses, low roughness, and low mechanical stress. The formation of crystalline TiO2 observed at high deposition temperature, or film thickness was inhibited by periodically introducing ultra-thin amorphous layers into the film. Only 4 ALD cycles of Al2O3 (corresponding to ca. 0.5 nm) between 335 ALD cycles of TiO2 (ca. 11 nm) form a closed, distinct layer suppressing the crystallization in TiO2 film. Consequently, the roughness of the pure TiO2 film is reduced from ca. 20 nm rms to 1 nm rms in the 335/4 nanolaminate, with only a slight decrease of the refractive index from 2.46 to 2.44 in 100 nm pure TiO2 and the nanolaminate, respectively. The refractive indices of the nanolaminates in various compositions vary between 2.38 and 2.50 at 632 nm, and the corresponding optical losses from the films are low. The mechanical stress was reduced to about 140 MPa in several TiO2/Al2O3 nanolaminates; however, lower mechanical stress has not been obtained with the studied compositions. The nanolaminate structure is preserved up to 600 °C annealing temperature. After annealing at 800 °C, the individual layers interdiffuse into each other so that no distinct nanolaminate structure is detected. By using TiO2/Al2O3 nanolaminates with reduced mechanical stress, a narrow bandpass filter was realized on various substrates, including half-ball and aspherical lenses.
RESUMO
Three-dimensional (3D) shape measurement systems based on diffuse reflection of projected structured light do not deliver reliable data when measuring glossy, transparent, absorbent, or translucent objects. In recent years, we have developed a method based on stereo recording with infrared cameras and projection of areal aperiodic sinusoidal thermal patterns to detect such objects. However, the measurements took longer than 10 s, up to minutes; moreover, the measurement accuracy was improvable. Now, we have succeeded in both drastically reducing measurement time and significantly increasing measurement quality. This finally provides a technique for reliably measuring transparent objects, e.g., in series production. We demonstrate measurement examples achieved within 1 s and with 3D standard deviations less than 10 µm.
RESUMO
A simplification strategy for segmented mirror splitters (SMS) used as beam combiners is presented. These devices are useful for compact beam division and the combination of linear and 2-D arrays. However, the standard design requires unique thin-film coating sections for each input beam; thus, potential for scaling to high beam-counts is limited due to manufacturing complexity. Taking advantage of the relative insensitivity of the beam combination process to amplitude variations, numerical techniques are used to optimize highly simplified designs with only one, two or three unique coatings. It is demonstrated that with correctly chosen coating reflectivities, the simplified optics are capable of high combination efficiency for several tens of beams. The performance of these optics as beam splitters in multicore fiber amplifier systems is analyzed, and inhomogeneous power distribution of the simplified designs is noted as a potential source of combining loss in such systems. These simplified designs may facilitate further scaling of filled-aperture coherently combined systems in linear array or 2-D array formats.
RESUMO
The potential of titanium and copper seed layers to enhance the optical properties of aluminum films for ultra-violet (UV) applications is analyzed. The seed layers significantly influence the initial layer growth of aluminum films. For the titanium-seeded aluminum, a surface roughness of 0.34 nm was observed. UV spectral reflectance measurements showed an average higher reflectivity of 4.8% for wavelengths from 120 nm to 200 nm for the aluminum film grown on the titanium seed layer. Furthermore, the titanium-seeded aluminum coatings were stable at an elevated temperature of 225°C and showed no increase in surface roughness or pinholes.
RESUMO
The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of >100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008-1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1%, while ASE is suppressed by at least 85 dB (PRF = 1 MHz) and 65 dB (PRF = 1 kHz).
RESUMO
In this contribution, we report high-power Raman frequency downconversion based on an Yb-doped fiber amplifier and a linear external diamond Raman cavity. A maximum output power of 136 W with nearly diffraction-limited beam quality was achieved by pumping in quasi-continuous-wave mode with 10% duty cycle and 10 ms on-time duration. For continuous-wave operation, we achieved record average power of 46 W centered at 1178 nm. The emergence of stimulated Brillouin scattering in diamond is further investigated. This technology shows the potential to extend the spectral range of fiber lasers to reach uncommon wavelengths at high power levels.
RESUMO
An ultrafast laser delivering 10.4 kW average output power based on a coherent combination of 12 step-index fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at an 80 MHz repetition rate, and has a high beam quality (M2≤1.2) and a low relative intensity noise of 0.56% in the frequency range of 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hands-off operation.
RESUMO
We present highly robust fiber Bragg gratings (FBGs) in passive large-mode-area fibers for kilowatt fiber laser systems. The gratings were inscribed directly through the fiber coating using near-infrared femtosecond laser pulses and then implemented in an all-fiber ytterbium-doped single-mode oscillator setup reaching up to 5 kW signal output power. The untreated cooled FBGs showed thermal coefficients as low as ${1}\;{\rm K}\;{{\rm kW}^{ - 1}}$1KkW-1, proving excellent qualification for the implementation into robust high-power fiber laser setups.
RESUMO
A concept to mitigate parasitic lasing in mid-IR fiber amplifiers using a single long period fiber grating is shown. Using tightly confined ultrashort laser pulses at 800 nm, a grating was directly inscribed into the core of an erbium doped fluoride glass fiber showing a strong attenuation down to -27 dB at desired wavelength. The concept reveals great potential to improve the average output power and attainable spectral range of low repetition rate in-amplifier supercontinuum generation.
RESUMO
We report on the detailed investigation of the core to cladding mode coupling in femtosecond-written long period fiber gratings (LPFG). It is shown that the excitation of higher-order cladding modes with strong selectivity and high precision is possible. The coupling behavior of several gratings, as well as its dependence on the modified core cross-section, is determined theoretically and confirmed experimentally by its spectral response. The presented tool paves the way for a completely new class of tailored LPFGs for different fiber integrated devices.
RESUMO
Adaptive optical pre-compensation is seen as crucial for free-space laser communication in order to overcome the influence of atmospheric turbulence, particularly with respect to Earth-to-GEO feederlinks. This paper presents an experimental investigation into adaptive optical pre-compensation under large point-ahead-angles. We detail the design and realization of a free-space laser communication experiment over a 1.0 km horizontal path using a divergent beacon beam and a focussed signal beam, propagating in opposite directions. We describe the design and development of our experimental setup and measurement campaign using real turbulence. The median isoplanatic angle was calculated to be 0.16 mrad, while an increase in the received optical power through pre-compensation could be demonstrated for point-ahead-angles in the range of 0.13 mrad to 0.27 mrad.
RESUMO
The pulse-energy scaling technique electro-optically controlled divided-pulse amplification is implemented in a high-power ultrafast fiber laser system based on coherent beam combination. A fiber-integrated front end and a multipass-cell-based back end allow for a small footprint and a modular implementation. Bursts of eight pulses are amplified parallel in up to 12 ytterbium-doped large-pitch fiber amplifiers. Subsequent spatiotemporal coherent combination of the 96 total amplified pulse replicas to a single pulse results in a pulse energy of 23 mJ at an average power of 674 W, compressible to a pulse duration of 235 fs. To the best of our knowledge, this is the highest pulse energy ever accomplished with a fiber chirped-pulse amplification (CPA) system.