Monodentate Alkoxy/Aryloxy Anchored Yttrium Dihydrides; Anticipated Outcomes and Surprises.

The synthesis, characterization, and solid-state structure of bulky alkoxy- and aryloxy-supported yttrium polynuclear hydrides are reported. Hydrogenolysis of the supertrityl alkoxy anchored yttrium dialkyl, Y(OTr*)(CH2SiMe3)2(THF)2 (1) (Tr* = tris(3,5-di-tert-butylphenyl)methyl), resulted in the clean conversion to the tetranuclear dihydride, [Y(OTr*)H2(THF)]4 (1a). X-ray analysis revealed a highly symmetrical structure (4̅ site symmetry) with the four Y atoms located on the corners of a compressed tetrahedron, each bonded to an OTr* and tetrahydrofuran (THF) ligand and the cluster held together by four face-capping, µ3-H, and four edge-bridging, µ2-H, hydrides. DFT calculations on the full system with and without THF, but also on model systems, clearly show that the structural preference for complex 1a is controlled by the presence and coordination of THF molecules. Contrary to the exclusive formation of the tetranuclear dihydride, hydrogenolysis of the bulky aryloxy yttrium dialkyl, Y(OAr*)(CH2SiMe3)2(THF)2 (2) (Ar* = 3,5-di-tert-butylphenyl) gave a mixture of the analogous tetranuclear 2a and trinuclear, [Y3(OAr*)4H5(THF)4], polyhydride, 2b. Similar results, i.e., a mixture of tetra-/tri-nuclear products, were obtained from hydrogenolysis of the even bulkier Y(OArAd2,Me)(CH2SiMe3)2(THF)2 compound. Experimental conditions were established to optimize the production of either the tetra- or trinuclear products. X-ray structure of 2b revealed a triangular array of three yttrium atoms with two face-capping µ3-H and three edge-bridging µ2-H hydrides, with one yttrium bonded to two aryloxy ligands while the other two have a complement of one aryloxy and two THF ligands; the solid-state structure is close to being C2 symmetric, with the C2 axis running through the unique Y and unique µ2-H hydride. As opposed to 2a, which shows distinct 1H NMR resonances for µ3/ µ2-H (δ = 5.83/6.35 ppm, respectively), no hydride signals for 2b were observed at room temperature, indicating hydride exchange on the NMR time scale. Their presence and assignment were secured at -40 °C from 1H SST (spin saturation) experiment.

Synthesis and Structure of Alkaline Earth Bis{hydrido-tris(3,5-diisopropyl-pyrazol-1-yl)borate} Complexes: Ae(TpiPr2)2 (Ae = Mg, Ca, Sr, Ba).

The synthesis and structural characterization of Ae(TpiPr2)2 (Ae = Mg, Ca, Sr, Ba; TpiPr2 = hydrido-tris(3,5-diisopropyl-pyrazol-1-yl)borate) are reported. In the crystalline state, the alkaline earth metal centers are six-coordinate, even the small Mg2+ ion, with two κ3-N,N',N''-TpiPr2 ligands, disposed in a bent arrangement (B···Ae···B < 180°). However, contrary to the analogous Ln(TpiPr2)2 (Ln = Sm, Eu, Tm, Yb) compounds, which all exhibit a bent-metallocene structure close to Cs symmetry, the Ae(TpiPr2)2 compounds exhibit a greater structural variation. The smallest Mg(TpiPr2)2 has crystallographically imposed C2 symmetry, requiring both bending and twisting of the two TpiPr2 ligands, while with the similarly sized Ca2+ and Sr2+, the structures are back toward the bent-metallocene Cs symmetry. Despite the structural variations, the B···M···B bending angle follows a linear size-dependence for all divalent metal ions going from Mg2+ to Sm2+, decreasing with increasing metal ion size. The complex of the largest metal ion, Ba2+, forms an almost linear structure, B···Ba···B 167.5°. However, the "linearity" is not due to the compound approaching the linear metallocene-like geometry, but is the result of the pyrazolyl groups significantly tipping toward the metal center, approaching "side-on" coordination. An attempt to rationalize the observed structural variations is made.

To bend or not to bend: experimental and computational studies of structural preference in Ln(Tp(iPr)2)2 (Ln = Sm, Tm).

The synthesis and characterization of Ln(Tp(iPr2))2 (Ln = Sm, 3Sm; Tm, 3Tm) are reported. While the simple (1)H NMR spectra of the compounds indicate a symmetrical solution structure, with equivalent pyrazolyl groups, the solid-state structure revealed an unexpected, "bent sandwich-like" geometry. By contrast, the structure of the less sterically congested Tm(Tp(Me2,4Et))2 (4) adopts the expected symmetrical structure with a linear B-Tm-B arrangement. Computational studies to investigate the origin of the unexpected bent structure of the former compounds indicate that steric repulsion between the isopropyl groups forces the Tp ligands apart and permits the development of unusual interligand C-H···N hydrogen-bonding interactions that help stabilize the structure. These results find support in the similar geometry of the Tm(III) analogue [Tm(Tp(iPr2))2]I, 3Tm(+), and confirm that the low symmetry is not the result of a metal-ligand interaction. The relevance of these results to the general question of the coordination geometry of MX2 and M(C5R5)2 (M = heavy alkaline earth and Ln(II), X = halide, and C5R5 = bulky persubstituted cyclopentadienyl) complexes and the importance of secondary H-bonding and nonbonding interactions on the structure are highlighted.

Synthesis and reaction of [(Tp(iPr2))LnH2]3 (Ln = Y, Lu) with CO: trinuclear cluster-bound propenolate en route to selective formation of propene.

The use of the Tp(iPr(2)) ligand led to the straightforward and high-yield synthesis of rare examples of trinuclear monoligand lanthanide dihydrides, [(Tp(iPr(2)))LnH(2)](3) (Ln = Y, Lu). The Y complex was found to mediate the hydrogenation and coupling of carbon monoxide with exclusive formation of propene via the intermediacy of a cluster-bound propenolate ligand.

Bis[tris(3-tert-butyl-5-methyl-pyrazol-1-yl)hydridoborato]ytterbium(II) toluene solvate.

In the title compound, [Yb(C(24)H(40)BN(6))(2)]·C(7)H(8), the Yb atom is coordinated by two tris(3-tert-butyl-5-methyl-pyrazol-1-yl)hydridoborate [Tp(tBu,Me)] ligands. One ligand binds in the κ(3) mode, throuh three N atoms of the pyrazolyl rings, the other ligand coordinates through two N atoms of the pyrazolyl rings and the H atom attached to the central B via an agostic-type inter-action through the B-H group of the second Tp(tBu,Me) ligand, giving an overall distorted octa-hedral geometry. One of the tert-butyl groups is disordered over two sites, with occupancies of 0.65 and 0.35.

Ln(III) methyl and methylidene complexes stabilized by a bulky hydrotris(pyrazolyl)borate ligand.

The reaction of Ln(AlMe(4))(3) with bulky hydrotris(pyrazolyl)borate (Tp(t)(Bu,Me))H proceeds via a sequence of methane elimination and C-H bond activation, affording unprecedented rare-earth metal ligand moieties including Ln(Me)[(micro-Me)AlMe(3)] and X-ray structurally characterized "Tebbe-like" Ln[(micro-CH(2))(2)AlMe(2)].

Crystal structure of tri-benzyl-bis-(tetra-hydro-furan-κO)lutetium(III).

In the title compound, [Lu(C7H7)3(C4H8O)2] (1), the Lu ion is coordinated by three benzyl and two tetra-hydro-furan ligands. Two of the benzyl groups are bonded in a classical η1-fashion through the methyl-ene via the ipso-carbon atom of the benzyl ligand in addition to bonding through the methyl-ene C atom, resulting in a modified trigonal-bipyramidal coordination geometry about the Lu center.

Formation and structural characterization of a europium(II) mono(scorpionate) complex and a sterically crowded pyraza-bole.

The reaction of EuI2(THF)2 with potassium hydro-tris-(3,5-diiso-propyl-pyrazol-yl)borate (K[HB(3,5- iPr2pz)3] (= KTp iPr2, pz = pyrazol-yl) in a molar ratio of 1:1.5 resulted in extensive ligand fragmentation and formation of the europium(II) mono(scorpionate) complex bis-(3,5-diisopropyl-1H-pyrazole)[hydro-tris-(3,5-diiso-propyl-pyrazol-yl)borato]iodido-europium(II), [Eu(C27H46BN6)I(C9H16N2)2] or (Tp iPr2)(3,5- iPr2pzH)2EuIII, 1, in high yield (78%). As a typical by-product, small amounts of the sterically crowded pyraza-bole derivative trans-4,8-bis-(3,5-diiso-propyl-pyrazol-1-yl)-1,3,5,7-tetra-iso-propyl-pyraza-bole, C36H62B2H8 or trans-{(3,5- iPr2pz)HB(µ-3,5- iPr2pz)}2, 2, were formed. Both title compounds have been structurally characterized through single-crystal X-ray diffraction. In 1, two isopropyl groups are each disordered over two orientations with occupancy ratios of 0.574 (10):0.426 (10) and 0.719 (16):0.281 (16). In 2, one isopropyl group is similarly disordered, occupancy ratio 0.649 (9):0.351 (9).

Stabilization of molecular lanthanide polysulfides by bulky scorpionate ligands.

Well-defined lanthanide polysulfide complexes containing S4(2-) and S5(2-) ligands, the samarium(iii) pentasulfide complex Sm(Tp(iPr2))(κ(1)-3,5-(i)Pr2Hpz)(S5) and the tetrasulfide-bridged binuclear ytterbium(iii) complex (µ-S4)[Yb(Tp(iPr2))(κ(1)-3,5-(i)Pr2Hpz)(κ(2)-3,5-(i)Pr2pz)]2 (Tp(iPr2) = hydro-tris(3,5-diisopropylpyrazolyl)borate), have been synthesized and structurally characterized by single-crystal X-ray diffraction.

Synthesis and structure of divalent thulium borohydrides, and their application in ε-caprolactone polymerisation.

The new divalent thulium compound [Tm(BH(4))(2)(DME)(2)] could be prepared by reduction of [Tm(BH(4))(3)(THF)(3)] or from TmI(2) and KBH(4). It was used as a precursor to the divalent [(Tp(tBu,Me))Tm(BH(4))(THF)] by reaction with potassium tris(2-tBu-4-Me)pyrazolylborate (KTp(tBu,Me)). Both Tm(II) compounds were found active as ε-caprolactone polymerisation catalysts.

Stable heteroleptic complexes of divalent lanthanides with bulky pyrazolylborate ligands--iodides, hydrocarbyls and triethylborohydrides.

The reaction of YbI(2) with KTp(Me2) gives (Tp(Me2))YbI(THF)(2) (1-Yb) as a thermally unstable product. Use of the more hindered KTp(tBu,Me) gave (Tp(tBu,Me))LnI(THF)(n) (Ln = Sm, n = 2, 2-Sm; Ln = Yb, n = 1, 2-Yb). The crystal structures of both these compounds are reported. Adducts with neutral ligands such as pyridines and isonitriles can be prepared and the crystal structures of [(Tp(tBu,Me))YbIL(n)] (L = CN(t)Bu, n = 1; L = 3,5-lutidine, n = 2) are described. 2-Sm can be oxidized using AgBPh(4) to give [(Tp(tBu,Me))SmI(THF)(2)]BPh(4). Compounds 2-Sm and 2-Yb are useful starting materials for the preparation of heteroleptic compounds by metathesis with appropriate potassium reagents. The preparations and characterization of the hydrocarbyls (Tp(tBu,Me))Ln{CH(SiMe(3))(2)} (Ln = Sm, 5-Sm; Yb, 5-Yb) and [(Tp(tBu,Me))Ln{CH(2)(SiMe(3))}(THF)] (Ln = Yb, 6a-Yb) and the triethylborohydrides [(Tp(tBu,Me))Ln(HBEt(3))(THF)(n)] (Ln = Sm, n = 0, 7-Sm; Yb, n = 1, 7-Yb) are reported, as well as the crystal structures of 5-Sm and 5-Yb, and the THF adducts 6a-Yb and [(Tp(tBu,Me))Sm{CH(SiMe(3))(2)}(THF)], 5a-Sm.

Trapping of anionic organic radicals by (TpMe2)2Ln (Ln = Sm, Eu).

Stoichiometric reaction of [ Sm(Tp(Me2))2 ], 1, with a variety of reducible ketone- and quinone-type substrates gave thermally stable, isolable radical anions/ketyls in moderate to good yields. Thus reaction with benzophenone gave [Sm(Tp(Me2))2(OCPh2)], 2, with fluorenone [Sm(Tp(Me2))2(eta1-OC13H8)], 3, and di-tert-butylparaquinone [Sm(Tp(Me2))2(eta1-OC6H2(tBu)2O)], 4, each of which was structurally characterized. In the case of the less-hindered benzoquinone, an unimetallic semiquinone [Sm(Tp(Me2))2(OC6H4O)], 5, could be isolated, although it was unstable with respect to formation of the dimetallic complex [Sm(Tp(Me2))2]2(mu-OC6H4O), 6. Compound 6 was structurally characterized, as was its anthraquinone analogue [Sm(Tp(Me2))2]2(mu-OC14H8O), 7. When the analogous reaction was carried out between the less-reducing [Eu(Tp(Me2))2] and benzoquinone, only the europium analogue of the semiquinone 5, [Eu(Tp(Me2))2(OC6H4O)], 8, could be isolated. The use of the sterically hindered 3,5-di-tert-butyl-o-benzoquinone allowed isolation of [Sm(Tp(Me2))2(DTBSQ)], 9.

Uranium (III) scorpionates: synthesis and structure of [(TpMe2)2U[N(C6H5)2]] and [(TpMe2)2U[N(SiMe3)2]].

Reaction of [(Tp(Me)2)(2)UI] with KNR(2) (R = C(6)H(5), SiMe(3)) in tetrahydrofuran (THF) afforded the monomeric trivalent actinide amide complexes [(Tp(Me)2)(2)U[N(C(6)H(5))(2)]], 1, and [(Tp(Me)2)(2)U[N(SiMe(3))(2)]], 2. The complexes have been fully characterized by spectroscopic methods and their structures were confirmed by X-ray crystallographic studies. In the solid state 1 and 2 exhibit distorted pentagonal bipyramidal geometries. The U-NR(2) bond lengths in both complexes are the same but in complex 2 the greater steric demands of the N(SiMe(3))(2) ligand led to elongated U-N(pz) bonds, especially those opposite the amido ligand.

Facile pyrazolylborate ligand degradation at lanthanide centers: X-ray crystal structures of pyrazolylborinate-bridged bimetallics.

Adventitious hydrolysis of a number of different complexes with the molecular formula Ln(Tp(Me2))(2)X [Tp(Me2) = (HB(dmpz)(3)), where X is a basic anionic ligand] in various solvents, yielded crystals of highly insoluble dimers of the general formula [Ln(Tp(Me2))(mu-BOp(Me2))](2) (1) [Ln = La, Ce, Sm; BOp(Me2) = (HBO(dmpz)(2))(2)(-); dmpzH = 3,5-dimethylpyrazole]. The results of several single-crystal X-ray determinations are reported. One metal nitrogen distance, that lying across from the two negatively charged bridging oxygen atoms, is 0.06 A longer than the others, suggesting an unusual trans influence at a lanthanide center. The formation of 1 is proposed to involve the intermediacy of Ln(Tp(Me2))(2)OH formed by protonolysis with adventitious water.