Seeded RAFT Polymerization-Induced Self-assembly: Recent Advances and Future Opportunities.

Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed.

Block Copolymer Vesicles with Tunable Membrane Thicknesses and Compositions Prepared by Aqueous Seeded Photoinitiated Polymerization-Induced Self-Assembly at Room Temperature.

Block copolymer vesicles with diverse functionalities and intrinsic hollow structures have received considerable attention due to their broad applications in biomedical fields, including drug delivery, bioimaging, theranostics, gene therapy, etc. However, efficient preparation of block copolymer vesicles with tunable membrane thicknesses and compositions under mild conditions is still a challenge. Herein, we report an aqueous seeded photoinitiated polymerization-induced self-assembly (photo-PISA) for the precise preparation of block copolymer vesicles at room temperature. By changing the total degree of polymerization (DP) of the hydrophobic block in seeded photo-PISA, one can easily tune the membrane thickness without compromising the morphology of vesicles. Moreover, by adding different comonomers such as hydrophobic monomers, hydrophilic monomers, and cross-linkers into seeded photo-PISA, vesicles with different compositions could be prepared without compromising the morphology and colloidal stability. Polymerization kinetics show that seeded photo-PISA can skip the step of in situ self-assembly with a short homogeneous polymerization stage being observed. To demonstrate potential biological applications, enzymatic nanoreactors were constructed by loading horseradish peroxidase (HRP) inside vesicles via seeded photo-PISA. The enzymatic properties of these nanoreactors could be easily regulated by changing the membrane thickness and hydrophobicity. It is expected that this method can provide a facile platform for the precise preparation of block copolymer vesicles that may find applications in different fields.

Simultaneous Synthesis and Self-Assembly of Bottlebrush Block Copolymers at Room Temperature via Photoinitiated RAFT Dispersion Polymerization.

Bottlebrush polymers exhibiting unique properties have attracted considerable attention for applications in many research areas. Herein, the first simultaneous synthesis and self-assembly of bottlebrush block copolymers at room temperature via photoinitiated polymerization-induced self-assembly (photo-PISA) using multifunctional macromolecular chain transfer agents (macro-CTAs) is reported. Comparing with linear block copolymers, the bottlebrush block copolymers can promote the formation of higher-order morphologies (e.g., vesicles) when targeting similar degrees of polymerization (DPs). Moreover, a higher polymerization rate is observed in the case of bottlebrush block copolymers. Gel permeation chromatography (GPC) analysis shows that good polymerization control is maintained when synthesizing bottlebrush block copolymers by photo-PISA. Finally, the obtained bottlebrush block copolymer vesicles are used as seeds for further chain extension and multicompartment nanoparticles with a sponge internal structure are formed. It is expected that this study will not only expand polymer architectures employed in PISA, but also provide a new strategy to synthesize polymer nanoparticles with unique structures.

Preparation of Block Copolymer Nano-Objects with Embedded ß-Ketoester Functional Groups by Photoinitiated RAFT Dispersion Polymerization.

Herein, a photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-(acetoacetoxy)ethyl methacrylate (AEMA) in ethanol/water at room temperature for in situ preparation of ß-ketoester-functionalized block copolymer nano-objects is reported. AEMA is also copolymerized with isobornyl methacrylate (IBOMA) to improve the colloidal stability of PIBOMA-based block copolymer nano-objects prepared by photoinitiated RAFT dispersion polymerization at low temperatures. A series of P(IBOMA-stat-AEMA)-based block copolymer nano-objects are prepared by changing reaction parameters. Finally, lanthanide-doped block copolymer nano-objects with luminescent and magnetic properties are also prepared based on the complexation of various lanthanide ions with the ß-ketoester group. It is expected that the current study will provide a facile platform for the in situ preparation of ß-ketoester-functionalized block copolymer nano-objects with different morphologies for specific applications.

How the Reactive End Group of Macro-RAFT Agent Affects RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly.

Polymerization-induced self-assembly via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization is an emerging method in which macro-RAFT agents are chain extended with hydrophobic monomers in water to form block copolymer nano-objects. However, almost all RAFT-mediated emulsion polymerizations are limited to AB diblock copolymers by using monofunctional macro-RAFT agents with non-reactive end groups. In this study, the first investigation on how the reactive end group of macro-RAFT agent affects RAFT-mediated emulsion polymerization is reported. Three macro-RAFT agents with different end groups are synthesized and employed in RAFT-mediated emulsion polymerization. Effects of end groups on morphologies of block copolymer nano-objects and polymerization process are studied. Block copolymer nano-objects prepared by using an asymmetric difunctional macro-RAFT agent can be functionalized by further chain extension on the surface. It is expected that the current study will not only expand the scope of RAFT-mediated emulsion polymerization, but also provide a novel strategy to prepare functional polymer nanoparticles.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons.

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

One-Step Preparation of Thermo-Responsive Poly(N-isopropylacrylamide)-Based Block Copolymer Nanoparticles by Aqueous Photoinitiated Polymerization-Induced Self-Assembly.

Poly(N-isopropylacrylamide) (PNIPAM) is an important thermo-responsive polymer that finds applications in many areas. However, the preparation of PNIPAM-based block copolymer nanoparticles with higher-order morphologies at high solids is challenging. Herein, aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) of N-isopropylacrylamide (NIPAM) using an asymmetrical cross-linker is developed for one-step preparation of PNIPAM-based block copolymer nanoparticles with various morphologies (spheres, worms, and vesicles). It is demonstrated that reaction temperature has a great effect on both polymerization kinetics and morphologies of block copolymer nanoparticles. Reversible addition-fragmentation chain transfer (RAFT) reactive groups embedded inside the PNIPAM core provide a landscape for further functionalization. PNIPAM-based block copolymer nanoparticles with different surface properties are prepared by seeded photo-PISA at room temperature. Finally, these block copolymer nanoparticles are also used as additives to tune mechanical properties of hydrogels via covalent cross-linking.

Neutrophil-to-lymphocyte ratio predicts critical illness patients with 2019 coronavirus disease in the early stage.

BACKGROUND: Patients with critical illness due to infection with the 2019 coronavirus disease (COVID-19) show rapid disease progression to acute respiratory failure. The study aimed to screen the most useful predictive factor for critical illness caused by COVID-19. METHODS: The study prospectively involved 61 patients with COVID-19 infection as a derivation cohort, and 54 patients as a validation cohort. The predictive factor for critical illness was selected using LASSO regression analysis. A nomogram based on non-specific laboratory indicators was built to predict the probability of critical illness. RESULTS: The neutrophil-to-lymphocyte ratio (NLR) was identified as an independent risk factor for critical illness in patients with COVID-19 infection. The NLR had an area under receiver operating characteristic of 0.849 (95% confidence interval [CI], 0.707 to 0.991) in the derivation cohort and 0.867 (95% CI 0.747 to 0.944) in the validation cohort, the calibration curves fitted well, and the decision and clinical impact curves showed that the NLR had high standardized net benefit. In addition, the incidence of critical illness was 9.1% (1/11) for patients aged ≥ 50 and having an NLR < 3.13, and 50% (7/14) patients with age ≥ 50 and NLR ≥ 3.13 were predicted to develop critical illness. Based on the risk stratification of NLR according to age, this study has developed a COVID-19 pneumonia management process. CONCLUSIONS: We found that NLR is a predictive factor for early-stage prediction of patients infected with COVID-19 who are likely to develop critical illness. Patients aged ≥ 50 and having an NLR ≥ 3.13 are predicted to develop critical illness, and they should thus have rapid access to an intensive care unit if necessary.

Modeling Seasonal Variations in Vertical GPS Coordinate Time Series Using Independent Component Analysis and Varying Coefficient Regression.

Common seasonal variations in Global Positioning System (GPS) coordinate time series always exist, and the modeling and correction of the seasonal signals are helpful for many geodetic studies using GPS observations. A spatiotemporal model was proposed to model the common seasonal variations in vertical GPS coordinate time series, based on independent component analysis and varying coefficient regression method. In the model, independent component analysis (ICA) is used to separate the common seasonal signals in the vertical GPS coordinate time series. Considering that the periodic signals in GPS coordinate time series change with time, a varying coefficient regression method is used to fit the separated independent components. The spatiotemporal model was then used to fit the vertical GPS coordinate time series of 262 global International GPS Service for Geodynamics (IGS) GPS sites. The results show that compared with least squares regression, the varying coefficient method can achieve a more reliable fitting result for the seasonal variation of the separated independent components. The proposed method can accurately model the common seasonal variations in the vertical GPS coordinate time series, with an average root mean square (RMS) reduction of 41.6% after the model correction.

Ketone-Functionalized Polymer Nano-Objects Prepared via Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA) Using a Poly(diacetone acrylamide)-Based Macro-RAFT Agent.

Herein, ketone-functionalized diblock copolymer nano-objects are prepared by photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of tert-butyl acrylate (tBA) using a poly(diacetone acrylamide) (PDAAM)-based macromolecular RAFT (macro-RAFT) agent in ethanol/water (60/40, w/w) at room temperature. A high polymerization rate is observed via the exposure of visible light (λmax = 405 nm, 0.45 mW cm-2 ) with near quantitative monomer conversion being achieved within 60 min. A morphological phase diagram is constructed by changing the degree of polymerization (DP) of PtBA and the monomer concentration. The morphologies of polymer nano-objects are further tuned by incorporating isobornyl acrylate (IBOA) into the core-forming block. The ketone-functionalized diblock copolymer nano-objects can be shell-cross-linked by reacting with a diamine. Finally, the shell-cross-linked polymer nano-objects are further hydrolyzed and employed as a template for the synthesis of silver composites.

Mining-Induced Time-Series Deformation Investigation Based on SBAS-InSAR Technique: A Case Study of Drilling Water Solution Rock Salt Mine.

Compared to traditional coal mines, the mining-induced dynamic deformation of drilling solution mining activities may result in even more serious damage to surface buildings and infrastructures due to the different exploitation mode. Therefore, long-term dynamic monitoring and analysis of rock salt mines is extremely important for preventing potential geological damages. In this work, the small baseline subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technique with Sentinel-1A imagery is utilized to monitor the ground surface deformation of a rock salt mining area. The time-series analysis is carried out to obtain the spatial-temporal characteristics of land subsidence caused by drilling solution mining activities. A typical rock salt mine in Changde, China is selected as the test site. Twenty-four scenes of Sentinel-1A image data acquired from June 2015 to January 2017 are used to obtain the time-series subsidence of the test mine. The temporal-spatial evolution of the derived settlement funnels is revealed. The time-series deformation on typical feature points has been analyzed. Experimental results show that the obtained drilling solution mining-induced subsidence has a spatial characteristic of multiplied peaks along the transversal direction. Temporally, the large-scale surface settlement for the rock salt mine area begins to appear in September 2016, with a time lag of 8 months, and shows an obvious seasonal fluctuation. The maximum cumulative subsidence is detected up to 199 mm. These subsiding characteristics are consistent with the connected groove mining method used in drilling water solution mines. To evaluate the reliability of the results, the SBAS-derived results are compared with the field-leveling measurements. The estimated root mean square error (RMSE) of ±11 mm indicates a high consistency.

Photoinitiated Seeded RAFT Dispersion Polymerization: A Facile Method for the Preparation of Epoxy-Functionalized Triblock Copolymer Nano-Objects.

In this study, a novel photoinitiated seeded reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization is developed for the preparation of epoxy-functionalized triblock copolymer nano-objects at room temperature. Epoxy-functionalized worms and vesicles prepared by photoinitiated RAFT dispersion polymerization of glycidyl methacrylate are used as seeds for chain extension by photoinitiated seeded RAFT dispersion polymerization of methacrylic and acrylic monomers. Good control is maintained during the polymerization with a high polymerization rate. Pure triblock copolymer worms can be prepared by the photoinitiated seeded RAFT dispersion polymerization with a broad degree of polymerization range of the third block. The room temperature feature of photoinitiated seeded RAFT dispersion polymerization is critical to ensure the survival of epoxy moiety after the polymerization. The obtained triblock copolymer nano-objects can be cross-linked by reacting with a diamine. Finally, cross-linked worms are used as the stationary phase of chromatography for selective separation of organic dyes from water.

Enzyme-PISA: An Efficient Method for Preparing Well-Defined Polymer Nano-Objects under Mild Conditions.

Enzyme catalysis is a mild, efficient, and selective technique that has many applications in organic synthesis as well as polymer synthesis. Here, a novel enzyme-catalysis-induced reversible addition-fragmentation chain transfer (RAFT)-mediated dispersion polymerization for preparing AB diblock copolymer nano-objects with complex morphologies at room temperature is described. Taking advantage of the room-temperature feature, it is shown that pure, worm-like polymer nano-objects can be readily prepared by just monitoring the viscosity. Moreover, it is demonstrated that inorganic nanoparticles and proteins can be loaded in situ into vesicles by this method. Finally, a novel oxygen-tolerant RAFT-mediated dispersion polymerization initiated by enzyme cascade reaction that can be carried out in open vessels is developed. The enzyme-initiated RAFT dispersion polymerization provides a facile platform for the synthesis of various functional polymer nano-objects under mild conditions.

Photoinitiated Polymerization-Induced Self-Assembly of Glycidyl Methacrylate for the Synthesis of Epoxy-Functionalized Block Copolymer Nano-Objects.

Herein, a novel photoinitiated polymerization-induced self-assembly formulation via photoinitiated reversible addition-fragmentation chain transfer dispersion polymerization of glycidyl methacrylate (PGMA) in ethanol-water at room temperature is reported. It is demonstrated that conducting polymerization-induced self-assembly (PISA) at low temperatures is crucial for obtaining colloidal stable PGMA-based diblock copolymer nano-objects. Good control is maintained during the photo-PISA process with a high rate of polymerization. The polymerization can be switched between "ON" and "OFF" in response to visible light. A phase diagram is constructed by varying monomer concentration and degree of polymerization. The PGMA-based diblock copolymer nano-objects can be further cross-linked by using a bifunctional primary amine reagent. Finally, silver nanoparticles are loaded within cross-linked vesicles via in situ reduction, exhibiting good catalytic properties.

Facile Preparation of CO2 -Responsive Polymer Nano-Objects via Aqueous Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA).

Carbon dioxide (CO2 )-responsive polymer nano-objects are prepared by photoinitiated reversible addition-fragmentation chain transfer dispersion polymerization of 2-hydroxypropyl methacrylate and 2-(dimethylamino)ethyl methacrylate (DMAEMA) in water at room temperature using a poly(poly(ethylene glycol) methyl ether methacrylate) macromolecular chain transfer agent. Kinetic studies confirm that full monomer conversions are achieved in all cases within 10 min of visible-light irradiation (405 nm, 0.5 mW cm-2 ). The effect of DMAEMA on the polymerization is studied in detail, and pure higher order morphologies (worms and vesicles) are prepared by this particular formulation. Finally, CO2 -responsive property of the obtained vesicles is investigated by dynamic light scattering, visual appearance, and transmission electron microscope.

Low-Temperature Synthesis of Thermoresponsive Diblock Copolymer Nano-Objects via Aqueous Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA) using Thermoresponsive Macro-RAFT Agents.

Photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2-(2-methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (Mn = 475 g mol(-1) ) as the macro-RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible-light irradiation (405 nm, 0.5 mW cm(-2) ), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple "ON/OFF" switch of the light source. Finally, thermoresponsive diblock copolymer nano-objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.

Grafting Block Copolymer Nanoparticles to a Surface via Aqueous Photoinduced Polymerization-induced Self-Assembly at Room Temperature.

The creation of well-defined surface nanostructures is important for a diverse set of applications such as cell adhesion, superhydrophobic coating, and lithography. In this study, we describe a robust bottom-up method for surface functionalization that involves surface-initiated reversible deactivation radical polymerization (RDRP) and the grafting of block copolymer nanoparticles to material surfaces via aqueous photoinduced polymerization-induced self-assembly (photo-PISA) at room temperature. Using silica nanoparticles as a model substrate, colloidal mesoscale hybrid assemblies with various morphologies were successfully prepared. The morphologies can be easily tuned by changing the lengths of macromolecular chain transfer agents and parameters of the silica nanoparticles. The surface-initiated photo-PISA approach can also be employed for other large-scale substrates such as silicon wafer. Taking advantage of mild reaction conditions of this method (room temperature, aqueous medium, and visible light), enzymatic deoxygenation was introduced to develop oxygen-tolerant surface-initiated photo-PISA that can fabricate well-defined nanostructures on large-scale substrates under open-to-air conditions.

Aqueous RAFT Dispersion Polymerization Mediated by an ω,ω-Macromolecular Chain Transfer Monomer: An Efficient Approach for Amphiphilic Branched Block Copolymers and the Assemblies.

Herein, an ω,ω-macromolecular chain transfer monomer (macro-CTM) containing a RAFT (reversible addition-fragmentation chain transfer) group and a methacryloyl group was synthesized and used to mediate photoinitiated RAFT dispersion polymerization of hydroxypropyl methacrylate (HPMA) in water. The macro-CTM undergoes a self-condensing vinyl polymerization (SCVP) mechanism under RAFT dispersion polymerization conditions, leading to the formation of amphiphilic branched block copolymers and the assemblies. Compared with RAFT solution polymerization, it was found that the SCVP process was promoted under RAFT dispersion polymerization conditions. Morphologies of branched block copolymer assemblies could be controlled by varying the monomer concentration and the [HPMA]/[macro-CTM] ratio. The branched block copolymer vesicles could be used as seeds for seeded RAFT emulsion polymerization, and framboidal vesicles were successfully obtained. Finally, degrees of branching of branched block copolymers could be further controlled by using a binary mixture of the macro-CTM and a linear macro-RAFT agent or a small molecule CTM. We believe that this study not only provides a versatile strategy for the preparation of branched block copolymer assemblies but also offers important insights into polymer synthesis via heterogeneous RAFT polymerization.

Exploiting the Monomer-Feeding Mechanism of RAFT Emulsion Polymerization for Polymerization-Induced Self-Assembly of Asymmetric Divinyl Monomers.

We exploited the monomer-feeding mechanism of reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization to achieve the successful polymerization-induced self-assembly (PISA) of asymmetric divinyl monomers. Colloidally stable cross-linked block copolymer nanoparticles with various morphologies, such as vesicles, were directly prepared at high solids. Morphologies of the cross-linked block copolymer nanoparticles could be controlled by varying the monomer concentration, degree of polymerization (DP) of the core-forming block, and length of the macro-RAFT agent. X-ray photoelectron spectroscopy (XPS) characterization confirmed the presence of unreacted vinyl groups within the obtained block copolymer nanoparticles, providing a landscape for further functionalization via thiol-ene chemistry. Finally, the obtained block copolymer nanoparticles were employed as additives to tune the mechanical properties of hydrogels. We expect that this study not only offers considerable opportunities for the preparation of well-defined cross-linked block copolymer nanoparticles, but also provides important insights into the controlled polymerization of multivinyl monomers.

High-Flow Nasal Cannula Oxygen Therapy versus Non-Invasive Ventilation in AIDS Patients with Acute Respiratory Failure: A Randomized Controlled Trial.

BACKGROUND: Acute respiratory failure (ARF) remains the most common diagnosis for intensive care unit (ICU) admission in acquired immunodeficiency syndrome (AIDS) patients. METHODS: We conducted a single-center, prospective, open-labeled, randomized controlled trial at the ICU, Beijing Ditan Hospital, China. AIDS patients with ARF were enrolled and randomly assigned in a 1:1 ratio to receive either high-flow nasal cannula (HFNC) oxygen therapy or non-invasive ventilation (NIV) immediately after randomization. The primary outcome was the need for endotracheal intubation on day 28. RESULTS: 120 AIDS patients were enrolled and 56 patients in the HFNC group and 57 patients in the NIV group after secondary exclusion. Pneumocystis pneumonia (PCP) was the main etiology for ARF (94.7%). The intubation rates on day 28 were similar to HFNC and NIV (28.6% vs. 35.1%, p = 0.457). Kaplan-Meier curves showed no statistical difference in cumulative intubation rates between the two groups (log-rank test 0.401, p = 0.527). The number of airway care interventions in the HFNC group was fewer than in the NIV group (6 (5-7) vs. 8 (6-9), p < 0.001). The rate of intolerance in the HFNC group was lower than in the NIV group (1.8% vs. 14.0%, p = 0.032). The VAS scores of device discomfort in the HFNC group were lower than that in the NIV group at 2 h (4 (4-5) vs. 5 (4-7), p = 0.042) and at 24 h (4 (3-4) vs. 4 (3-6), p = 0.036). The respiratory rate in the HFNC group was lower than that in the NIV group at 24 h (25 ± 4/min vs. 27 ± 5/min, p = 0.041). CONCLUSIONS: Among AIDS patients with ARF, there was no statistical significance of the intubation rate between HFNC and NIV. HFNC had better tolerance and device comfort, fewer airway care interventions, and a lower respiratory rate than NIV. CLINICAL TRIAL NUMBER: Chictr.org (ChiCTR1900022241).