Implications of CO2 emissions on the main land and forest uses in the Brazilian Amazon.

The emission of soil carbon dioxide (CO2) in agricultural areas is a process that results from the interaction of several factors such as climate, soil, and land management practices. Agricultural practices directly affect the carbon dynamics between the soil and atmosphere. Herein, we evaluated the temporal variability (2020/2021 crop season) of soil CO2 emissions and its relationship with related variables, such as the CO2 flux model, enhanced vegetation index (EVI), gross primary productivity (GPP), and leaf area index (LAI) from orbital data and soil temperature, soil moisture, and soil CO2 emissions from in situ collections from native forests, productive pastures, degraded pastures, and areas of high-yield potential soybean and low-yield potential soybean production. A significant influence (p < 0.01) was observed for all variables and between the different land uses and occupation types. September and October had lower emissions of soil CO2 and low means of soil moisture and soil temperature, and no differences were observed among the treatments. On the other hand, there was a significant effect of the CO2 flux model in productive pastures, high-yield potential soybean areas, and low-yield potential soybean areas. The months with the highest CO2 flux values in the model, regardless of land use and land cover, were October and November, which is the beginning of the rainy season. There were positive correlations between soil CO2 emissions and GPP (0.208), LAI (0.354), EVI (0.363), and soil moisture (0.280) and negative correlations between soil CO2 emissions and soil temperature (-0.240) and CO2 flux model (-0.314) values. Land use and land cover showed negative correlations with these variables, except for the CO2 flux model variable. Soil CO2 emission values were lower for high-yield potential soybean areas (averages from 0.834 to 6.835 µmol m-2 s-1) and low-yield potential soybean areas (from 0.943 to 5.686 µmol m-2 s-1) and higher for native forests (from 2.279 to 8.131 µmol m-2 s-1), whereas the opposite was true for the CO2 flux model.

Twenty-year impact of fire foci and its relationship with climate variables in Brazilian regions.

In recent years, Brazil has become a major global contributor to the occurrence of national fires and greenhouse gas emissions. Therefore, this study aimed to evaluate the fire foci data of the past 20 years to determine their relationship with climatic variables in various Brazilian regions. The variables evaluated included fire foci, land surface temperature, rainfall, and standardized precipitation index, which were obtained via remote sensing from 2000 to 2019. The data were subjected to trend analyses (Mann-Kendall and Pettitt tests) and a multivariate analysis of canonical variables for evaluation. The results showed that the Midwest and North regions had the highest occurrence of fire foci throughout the study period, and that the North region had the highest accumulated annual rainfall. Thus, these regions require specific public policies to prevent future fires. Overall, the Midwest, Southeast, and South regions exhibit significant increasing fire foci tendencies. Our results reveal that this trend is related to the El Niño-Southern Oscillation (ENSO) phenomena, which alter climatic variables such as precipitation, land surface temperature, and the standardized precipitation index. Finally, the sugarcane growing area had a significant linear relationship with fire foci in the Southeast region, especially in the state of São Paulo, the major national sugarcane producer.

Effect of land uses and land cover on soil attributes in the southern Brazilian Amazon.

The growth of the world population has led to the expansion of agricultural areas to produce food that meets world demand, making it necessary to increase productivity and maintain environmental sustainability in these areas. Seeking sustainable food production, the agricultural use of soil must be assessed in view of optimal use or land as natural resource, as well as minimize the effects of global warming related to land use and land cover (LULC). We hypothesize that different LULC affects Amazonian soil attributes. In this study, the effect of different LULC in the southern Brazilian Amazon, namely, native forest, pasture, and rice and soybean crops, on the spatial variability of soil fertility and texture was assessed, seeking to obtain information that will guide farmers in the near future to better exploit their areas and contribute to a more sustainable agriculture. Descriptive statistical analysis was performed for the pH, H + Al, Al, Ca, Mg, P, K, Cu, Fe, Mn, Zn, V, m, organic matter, clay, silt, and sand values from soil samples under different LULC. To verify the data normality, the Shapiro-Wilk test at 5% significance was performed. Outlier analysis using boxplot graphics, principal component analysis (PCA), and cluster analysis was performed. Data were submitted to geostatistical analysis to verify the spatial dependence degree of the variables through semivariograms for interpolated kriging maps. Except for silt, all variables were well represented in the factor map. PCA revealed that the data variability can be explained mainly by pH, V, Ca, K, and Zn values, which are inversely proportional to m, P, and sand. Through geostatistical analysis, spatial dependence ranging from moderate to strong was observed, generating reliability in the prediction of most attributes in pasture, rice, and soybean areas. Yet, a spatial dependence ranging from moderate to strong was found, generating reliability in the prediction of most attributes in pasture, rice, and soybean areas. Our findings reveal a lower fertility and higher acidity in forest areas, whereas crop areas presented the opposite result.

Application of remote sensing in environmental impact assessment: a case study of dam rupture in Brumadinho, Minas Gerais, Brazil.

The collapse of mining tailing dams in Brumadinho, Minas Gerais, Brazil, that occurred in 2019 was one of the worst environmental and social disasters witnessed in the country. In this sense, monitoring any impacted areas both before and after the disaster is crucial to understand the actual scenario and problems of disaster management and environmental impact assessment. In order to find answers to that problem, the aim of this study was to identify and analyze the spatiality of the impacted area by rupture of the tailing dam of the Córrego do Feijão mine in Brumadinho, Minas Gerais, by using orbital remote sensing. Land use and land occupation, phytoplankton chlorophyll-a, water turbidity, total suspended solids on water, and carbon sequestration efficiency by vegetation (CO2Flux) were estimated by orbital imagery from the Landsat-8/OLI and MSI/Sentinel-2 sensors in order to assess the environmental impacts generated by the disaster. Data were extracted from spectral models in which the variables that best demonstrated the land use variation over the years were sought. Mean comparison by t-test was performed to compare the time series analyzed, that is, before and after the disaster. Through the analysis of water quality, it was observed that the environmental impact was calamitous to natural resources, especially water from Córrego do Feijão.

Monitoring and predicting corn grain quality on the transport and post-harvest operations in storage units using sensors and machine learning models.

Monitoring the intergranular variables of corn grain mass during the transportation, drying, and storage stages it possible to predict and avoid potential grain quality losses. For monitoring the grain mass along the transport, a probe system with temperature, relative humidity, and carbon dioxide sensors was developed to determine the equilibrium moisture content and the respiration of the grain mass. These same variables were monitored during storage. At drying process, the drying air and grain mass temperatures, as well as the relative humidity, were monitored. For the prediction of the physical and physical-chemical quality of the grains, the results obtained from the monitoring were used as input data for the multiple linear regression, artificial neural networks, decision tree, and random forest models. A Pearson correlation was applied to verify the relationship between the monitored and predicted variables. From the results obtained, we verified that the intergranular relative humidity altered the equilibrium moisture content of the grains, contributing to the increased respiration and hence dry matter losses along the transport. At this stage, the artificial neural network model was the most indicated to predict the electrical conductivity, apparent specific mass, and germination. The random forest model satisfactorily estimated the dry matter loss. During drying, the air temperature caused volumetric contraction and thermal damage to the grains, increasing the electric conductivity index. Artificial neural network and random forest models were the most suitable for predicting the quality of dry grains. During storage, the environmental conditions altered the moisture contents causing a reduction in the apparent specific mass, germination, and crude protein, crude fiber, and fat contents. Artificial neural network and random forest were the best predictors of moisture content and germination. However, the random forest model was the best predictor of apparent specific mass, electrical conductivity, and starch content of stored grains.

Geographical adaptability for optimizing the recommendation of soybean cultivars in the Brazilian Cerrado.

Yield multi-location trials associated to geostatistical techniques with environmental covariables can provide a better understanding of G x E interactions and, consequently, adaptation limits of soybean cultivars. Thus, the main objective of this study is understanding the environmental covariables effects on soybean adaptation, as well as predicting the adaptation of soybean under environmental variations and then recommend each soybean cultivar to favorable environments aiming maximize the average yield. The trials were carried out in randomized block design (RBD) with three replicates over three years, in 28 locations. Thirty-two genotypes (commercial and pre-commercial) representing different maturity groups (7.5-8.5) were evaluated in each trial were covering the Edaphoclimatic Region (REC) 401, 402 and 403. The covariables adopted as environmental descriptors were accumulated rainfall, minimum temperature, mean temperature, maximum temperature, photoperiod, relative humidity, soil clay content, soil water avaibility and altitude. After fitting means through Mixed Linear Model, the Regression-Kriging procedure was applied to spacialize the grain yield using environmental covariables as predictors. The covariables explained 32.54% of the GxE interaction, being the soil water avaibility the most important to the adaptation of soybean cultivars, contributing with 7.80%. Yield maps of each cultivar were obtained and, hence, the yield maximization map based on cultivar recommendation was elaborated.

Machine learning in the classification of asian rust severity in soybean using hyperspectral sensor.

Traditional monitoring of asian soybean rust severity is a time- and labor-intensive task, as it requires visual assessments by skilled professionals in the field. Thus, the use of remote sensing and machine learning (ML) techniques in data processing has emerged as an approach that can increase efficiency in disease monitoring, enabling faster, more accurate and time- and labor-saving evaluations. The aims of the study were: (i) to identify the spectral signature of different levels of Asian soybean rust severity; (ii) to identify the most accurate machine learning algorithm for classifying disease severity levels; (iii) which spectral input provides the highest classification accuracy for the algorithms; (iv) to determine a sample size of leaves that guarantees the best accuracy for the algorithms. A field experiment was carried out in the 2022/2023 harvest in a randomized block design with a 6x3 factorial scheme (ML algorithms x severity levels) and four replications. Disease severity levels assessed were: healthy leaves, 25 % severity, and 50 % severity. Leaf hyperspectral analysis was carried out over a wide range from 350 to 2500 nm. From this analysis, 28 spectral bands were extracted, seeking to distinguish the spectral signature for each severity level with the least input dataset. Data was subjected to machine learning analysis using Artificial Neural Network (ANN), REPTree (DT) and J48 decision trees, Random Forest (RF), and Support Vector Machine (SVM) algorithms, as well as a traditional classification method (Logistic Regression - LR). Two different input datasets were tested for each algorithm: the full spectrum (ALL) provided by the sensor and the 28 spectral bands (SB). Tests with different sample sizes were also conducted to investigate the algorithms' ability to detect severity levels with a reduced sample size. Our findings indicate differences between the spectral curves for the severity levels assessed, which makes it possible to differentiate between healthy plants with low and high severity using hyperspectral sensing. SVM was the most accurate algorithm for classifying severity levels by using all the spectral information as input. This algorithm also provided high classification accuracy when using smaller leaf samples. This study reveals that hyperspectral sensing and the use of ML algorithms provide an accurate classification of different levels of Asian rust severity, and can be powerful tools for a more efficient disease monitoring process.

Water strategy improves the inflorescence primordia formation of 'Arra 15' grapevine in the Brazilian semiarid region.

Failure in irrigation management of grapevines grown in the Brazilian semiarid region can affect bud fertility. Adequate irrigation, considering both the development of bunches in the current cycle and the formation of fertile buds for subsequent cycles, can bring significant advances to viticulture. Therefore, the objective of this research was to investigate the effect of different irrigation levels during flowering on the formation of buds and potential bunches of 'Arra 15' grapevine and its relationship with metabolic processes. A field experiment was carried out in a commercial vineyard in Petrolina, Pernambuco, Brazil, during the 2021 and 2022 seasons. The experiment was designed in randomized blocks with four replications and five irrigation levels (70; 85; 100; 115 and 130% of crop evapotranspiration - ETc) during three production cycles. The variables fertile bud, vegetative bud, dead bud, potential fertility of the basal, median, and apical regions of the branches, number of potential bunches, reducing sugar, total soluble sugar, net photosynthesis, stomatal conductance, transpiration, and relative chlorophyll index were evaluated. The 115% ETc irrigation level improved the number of fertile buds and number of potential bunches. Irrigation level above 115% ETc increased gas exchange and relative chlorophyll index, while 70% ETc increased leaf sugar content. The most appropriate irrigation strategy is the application of 115% ETc during the flowering stage, for the increase of fertile buds and potential bunches of the next cycle, without influencing the vine metabolism. Total soluble sugars are a promising indicator of water deficit during flowering and as an indicator of vegetative bud formation for the next cycle.

High-throughput phenotyping using VIS/NIR spectroscopy in the classification of soybean genotypes for grain yield and industrial traits.

Employing visible and near infrared sensors in high-throughput phenotyping provides insight into the relationship between the spectral characteristics of the leaf and the content of grain properties, helping soybean breeders to direct their program towards improving grain traits according to researchers' interests. Our research hypothesis is that the leaf reflectance of soybean genotypes can be directly related to industrial grain traits such as protein and fiber contents. Thus, the objectives of the study were: (i) to classify soybean genotypes according to the grain yield and industrial traits; (ii) to identify the algorithm(s) with the highest accuracy for classifying genotypes using leaf reflectance as model input; (iii) to identify the best input data for the algorithms to improve their performance. A field experiment was carried out in randomized block design with three replications and 32 soybean genotypes. At 60 days after emergence, spectral analysis was carried out on three leaf samples from each plot. A hyperspectral sensor was used to capture reflectance between the wavelengths from 450 to 824 nm. Representative spectral bands were selected and grouped into means. After harvest, grain yield was assessed and laboratory analyses of industrial traits were carried out. Spectral, industrial traits and yield data were subjected to statistical analysis. Data were analyzed by the following machine learning algorithms: J48 (J48) and REPTree (DT) decision trees, Random Forest (RF), Artificial Neural Networks (ANN), Support Vector Machine (SVM), and conventional Logistic Regression (LR) analysis. The clusters formed were used as the output of the models, while two groups of input data were used for the input of the models: the spectral variables (WL) noise-free obtained by the sensor (450-828 nm) and the spectral means of the selected bands (SB) (450.0-720.6 nm). Soybean genotypes were grouped according to their grain yield and industrial traits, in which the SVM and J48 algorithms performed better at classifying them. Using the spectral bands selected in the study improved the classification accuracy of the algorithms.

Flavonoids and their relationship with the physiological quality of seeds from different soybean genotypes.

Flavonoids are compounds that result from the secondary metabolism of plants and play a crucial role in plant development and mitigating biotic and abiotic stresses. The highest levels of flavonoids are found in legumes such as soybean. Breeding programs aim to increase desirable traits, such as higher flavonoid contents and vigorous seeds. Soybeans are one of the richest sources of protein in the plant kingdom and the main source of flavonoid derivatives for human health. In view of this, the hypothesis of this study is based on the possibility that the concentration of isoflavones in soybean seeds contributes to the physiological quality of the seeds. The aim of this study was to analyze the content of flavonoids in soybean genotypes and their influence on the physiological quality of the seeds. Seeds from thirty-two soybean genotypes were obtained by carrying out a field experiment during the 2021/22 crop season. The experimental design was randomized blocks with four replications and thirty-two F3 soybean populations. The seeds obtained were subjected to germination, first germination counting, electrical conductivity and tetrazolium vigor and viability tests. After drying and milling the material from each genotype, liquid chromatography analysis was carried out to obtain flavonoids, performed at UPLC level. Data were submitted to analysis of variance and, when significant, the means were compared using the Scott-Knott test at 5% probability. The results found here show the occurrence of genotypes with higher amounts of flavonoids when compared to their peers. The flavonoid FLVD_G2 had the highest concentration and differed from the others. Thus, we can assume that the type and concentration of flavonoids does not influence the physiological quality of seeds from different soybean genotypes, but it does indirectly contribute to viability and vigor, since the genotypes with the highest FLVD_G2 levels had better FGC values. The findings indicate that there is a difference between the content of flavonoids in soybean genotypes, with a higher content of genistein. The content of flavonoids does not influence the physiological quality of seeds, but contributes to increasing viability and vigor.

Sensor-cable-probe and sampler for early detection and prediction of dry matter loss and real-time corn grain quality in transport and storage.

Taking into account that the transport of grains can be carried out over long distances and that the mass of grains during transport often has high moisture content, there may be risks of heat and moisture transfer and heating of the grains mass, proving quanti-qualitative losses. Thus, this study aimed to validate a method with probe system for real-time monitoring of temperature, relative humidity and carbon dioxide in the grain mass of corn during transport and storage to detect early dry matter losses and predict possible changes on the grain physical quality. The equipment consisted of a microcontroller, system's hardware, digital sensors to detect air temperature and relative humidity, a non-destructive infrared sensor to detect CO2 concentration. Real-time monitoring system determined early and satisfactorily in an indirect way the changes in the physical quality of the grains confirming by the physical analyses of electrical conductivity and germination. The equipment in real-time monitoring and the application of Machine Learning was effective to predict dry matter loss, due to the high equilibrium moisture content and respiration of the grain mass on the 2-h period. All machine learning models, except support vector machine, obtained satisfactory results, equaling the multiple linear regression analysis.

Dynamics of major environmental disasters involving fire in the Brazilian Pantanal.

The 2020 environmental catastrophe in Pantanal has highlighted the fragility of environmental policies and practices for managing and fighting fires in this biome. Therefore, it is essential to know the causes and circumstances that potentiate these fires. This study aimed to: (I) assess the relationship between fire foci and carbon absorption (GPP), precipitation, and carbon dioxide (CO2) flux; (ii) analyze vegetation recovery using the differenced normalized burn ratio (ΔNBR) in Brazilian Pantanal between 2001 and 2022; and (iii) identify priority areas, where the highest intensities of fire foci have occurred, in order to guide public policies in Brazil to maintain local conservation. To this purpose, fire foci were detected using data from the MODIS MOD14/MYD14 algorithm, annual precipitation with CHIRPS (Climate Hazards Group InfraRed Precipitation with Station data), and CO2 flux using the MODIS/MODO9A1 product, and Gross Primary Production (GPP) with the MODIS/MOD17A2 product. The severity of the burned area was also assessed using the ΔNBR index and the risk areas were determined using the averages of these images. During the time series studied, a total of 300,127 fire foci were detected throughout the Pantanal, where 2020 had the highest number of foci and the lowest accumulated precipitation. The years with the highest precipitation were 2014 and 2018. The year 2018 was also the second year with the highest GPP value. The Pettit test showed a trend for 2008 and 2011 as the points of change in the CO2 flux and GPP variables. Principal component analysis clustered fire foci and precipitation on opposite sides, as well as GPP and CO2 flux, while ΔNBR clustered HS, MHS and MLS classes with the years 2020, 2019, 2002 and 2021. There was a high negative correlation between fire foci × rainfall and GPP × CO2 flux. The years with the largest areas of High severity (HS), Moderate-high severity (MHS) and Moderate-low severity (MLS) classes were 2020 and 2019, respectively. The most vulnerable areas for severe fires were the municipalities of Cáceres, Poconé, and Corumbá. The major fire catastrophe in 2020 is correlated with the low precipitation in 2019, the high precipitation in 2018, and the increased GPP, as well government policies unfavorable to the environment.

Drying and intermittence processes on the polished and brown rice physicochemical and morphological quality by near-infrared spectroscopy, X-ray diffraction, and scanning electron microscopy.

In this study was correlate the effects of drying time and intermittence of paddy rice on the physical, physicochemical, and morphological quality of polished and brown rice using near-infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Rice grain batches from mechanized harvesting with moisture contents between 24 and 20% (w.b.) were immediately subjected to drying and intermittence (average temperature of the grain mass of 40 °C) for a time of 14 h (number of times that the product underwent the drying and intermittence processes). For each drying time, grain sampling was performed to evaluate the physical quality of paddy rice and the physicochemical and morphological quality of polished and brown rice. The accumulated drying time provided an increase in the temperature of the grain mass, altering the physicochemical and morphological quality of polished and brown rice. The intermittence process did not contribute for the quality of the polished rice.

Understanding the combining ability of nutritional, agronomic and industrial traits in soybean F2 progenies.

Obtaining soybean genotypes that combine better nutrient uptake, higher oil and protein levels in the grains, and high grain yield is one of the major challenges for current breeding programs. To avoid the development of unpromising populations, selecting parents for crossbreeding is a crucial step in the breeding pipeline. Therefore, our objective was to estimate the combining ability of soybean cultivars based on the F2 generation, aiming to identify superior segregating parents and populations for agronomic, nutritional and industrial traits. Field experiments were carried out in two locations in the 2020/2021 crop season. Leaf contents of the following nutrients were evaluated: phosphorus, potassium, calcium, magnesium, sulfur, copper, iron, manganese, and zinc. Agronomic traits assessed were days to maturity (DM) and grain yield (GY), while the industrial traits protein, oil, fiber and ash contents were also measured in the populations studied. There was a significant genotype × environment (G × A) interaction for all nutritional traits, except for P content, DM and all industrial traits. The parent G3 and the segregating populations P20 and P27 can be used aiming to obtain higher nutritional efficiency in new soybean cultivars. The segregating populations P11 and P26 show higher potential for selecting soybean genotypes that combine earliness and higher grain yield. The parent G5 and segregant population P6 are promising for selection seeking improvement of industrial traits in soybean.

Predicting the quality of soybean seeds stored in different environments and packaging using machine learning.

The monitoring and evaluating the physical and physiological quality of seeds throughout storage requires technical and financial resources and is subject to sampling and laboratory errors. Therefore, machine learning (ML) techniques could help optimize the processes and obtain accurate results for decision-making in the seed storage process. This study aimed to analyze the performance of ML algorithms from variables monitored during seed conditioning (temperature and packaging) and storage time to predict the physical and physiological quality of stored soybean seeds. Data analysis was performed using the Artificial Neural Networks, decision tree algorithms REPTree and M5P, Random Forest, and Linear Regression. In predicting seed quality, the combination of the input variables temperature and storage time for REPTree and Random Forest algorithms outperformed the linear regression, providing higher accuracy indices. Among the most important results, it was observed for apparent specific mass that T + P + ST, T + ST, P + ST, and ST had the highest r means and the lowest MAE means, however, Person's r coefficient for these inputs was 0.63 and the MAE between 9.59 to 10.47. The germination results for inputs T + P + ST and T + ST had the best results (r = 0.65 and r = 0.67, respectively) in the ANN, REPTree, M5P and RF models. Using computational intelligence algorithms is an excellent alternative to predict the quality of soybean seeds from the information of easy-to-measure variables.

High-throughput phenotyping allows the selection of soybean genotypes for earliness and high grain yield.

BACKGROUND: Precision agriculture techniques are widely used to optimize fertilizer and soil applications. Furthermore, these techniques could also be combined with new statistical tools to assist in phenotyping in breeding programs. In this study, the research hypothesis was that soybean cultivars show phenotypic differences concerning wavelength and vegetation index measurements. RESULTS: In this research, we associate variables obtained via high-throughput phenotyping with the grain yield and cycle of soybean genotypes. The experiment was carried out during the 2018/2019 and 2019/2020 crop seasons, under a randomized block design with four replications. The evaluated soybean genotypes included 7067, 7110, 7739, 8372, Bonus, Desafio, Maracai, Foco, Pop, and Soyouro. The phenotypic traits evaluated were: first pod height (FPH), plant height (PH), number of branches (NB), stem diameter (SD), days to maturity (DM), and grain yield (YIE). The spectral variables evaluated were wavelengths and vegetation indices (NDVI, SAVI, GNDVI, NDRE, SCCCI, EVI, and MSAVI). The genotypes Maracai and Foco showed the highest grain yields throughout the crop seasons, in addition to belonging to the groups with the highest means for all VIs. YIE was positively correlated with the NDVI and certain wavelengths (735 and 790 nm), indicating that genotypes with higher values for these spectral variables are more productive. By path analyses, GNDVI and NDRE had the highest direct effects on the dependent variable DM, while NDVI had a higher direct effect on YIE. CONCLUSIONS: Our findings revealed that early and productive genotypes can be selected based on vegetation indices and wavelengths. Soybean genotypes with a high grain yield have higher means for NDVI and certain wavelengths (735 and 790 nm). Early genotypes have higher means for NDRE and GNDVI. These results reinforce the importance of high-throughput phenotyping as an essential tool in soybean breeding programs.

Reduction of pesticide application via real-time precision spraying.

Farmers focus on reducing the cost of production and aim to increase profit. The objective of this study was to quantify the reduction of pesticides applied to soybean (Glycine max (L.) Merrill) and maize (Zea mays L.) crops in several stages of the production cycle using a site-specific spraying application based on real-time sensors in the Brazilian Cerrado region. The sprayers were equipped with a precision spraying control system based on a real-time sensor. The spraying operations were performed not only for herbicide, but also for fungicide and insecticides applications. The maps recorded the percentage of the spray boom when the application was turned on (on/off spray system) with nozzle-to-nozzle control. The precision spraying system based on real-time sensors reduced the volume of pesticides (including herbicides, insecticides, and fungicides) applied to soybean and maize crops. There was a more significant reduction in the volume of pesticides applied post-emergence of the crops in the initial stages of soybean and maize when the crops had less leaf area or less foliage coverage between the rows. The cost reduction achieved using this technology was 2.3 times lower than the cost associated with pesticide application over the entire area using a conventional sprayer. Under the experimental conditions, there were no differences in the average crop yield, compared to the historical productivity of soybean and maize crops by applying this technology because the recommended doses were not affected and the site of application was limited to points where the presence of plants was present was detected.

The fewer, the better fare: Can the loss of vegetation in the Cerrado drive the increase in dengue fever cases infection?

Several studies have reported the relationship of deforestation with increased incidence of infectious diseases, mainly due to the deregulation caused in these environments. The purpose of this study was to answer the following questions: a) is increased loss of vegetation related to dengue cases in the Brazilian Cerrado? b) how do different regions of the tropical savanna biome present distinct patterns for total dengue cases and vegetation loss? c) what is the projection of a future scenario of deforestation and an increased number of dengue cases in 2030? Thus, this study aimed to assess the relationship between loss of native vegetation in the Cerrado and dengue infection. In this paper, we quantify the entire deforested area and dengue infection cases from 2001 to 2019. For data analyses, we used Poisson generalized linear model, descriptive statistics, cluster analysis, non-parametric statistics, and autoregressive integrated moving average (ARIMA) models to predict loss of vegetation and fever dengue cases for the next decade. Cluster analysis revealed the formation of four clusters among the states. Our results showed significant increases in loss of native vegetation in all states, with the exception of Piauí. As for dengue cases, there were increases in the states of Minas Gerais, São Paulo, and Mato Grosso. Based on projections for 2030, Minas Gerais will register about 4,000 dengue cases per 100,000 inhabitants, São Paulo 750 dengue cases per 100,000 inhabitants, and Mato Grosso 500 dengue cases per 100,000 inhabitants. To reduce these projections, Brazil will need to control deforestation and implement public health, environmental and social policies, requiring a joint effort from all spheres of society.

Increasing selection gain and accuracy of harvest prediction models in Jatropha through genome-wide selection.

Genome-wide selection (GWS) has been becoming an essential tool in the genetic breeding of long-life species, as it increases the gain per time unit. This study had a hypothesis that GWS is a tool that can decrease the breeding cycle in Jatropha. Our objective was to compare GWS with phenotypic selection in terms of accuracy and efficiency over three harvests. Models were developed throughout the harvests to evaluate their applicability in predicting genetic values in later harvests. For this purpose, 386 individuals of the breeding population obtained from crossings between 42 parents were evaluated. The population was evaluated in random block design, with six replicates over three harvests. The genetic effects of markers were predicted in the population using 811 SNP's markers with call rate = 95% and minor allele frequency (MAF) > 4%. GWS enables gains of 108 to 346% over the phenotypic selection, with a 50% reduction in the selection cycle. This technique has potential for the Jatropha breeding since it allows the accurate obtaining of GEBV and higher efficiency compared to the phenotypic selection by reducing the time necessary to complete the selection cycle. In order to apply GWS in the first harvests, a large number of individuals in the breeding population are needed. In the case of few individuals in the population, it is recommended to perform a larger number of harvests.

Polymorphisms of the genes CTLA4, PTPN22, CD40, and PPARG and their roles in Graves' disease: susceptibility and clinical features.

PURPOSE: CTLA4, PTPN22, and CD40 are immune-regulatory genes strongly associated with GD, as well as PPARG, but their clinical significance in different populations is still uncertain. METHODS: We genotyped 282 Brazilian GD patients (234 women and 48 men, 39.80 ± 11.69 years old), including 144 patients with GO, and 308 healthy control individuals (246 women and 62 men, 36.86 ± 12.95 years old). RESULTS: A multivariate analysis demonstrated that the inheritance of the GG genotype rs3087243 of CTLA4 (OR = 2.593; 95% CI = 1.630-4.123; p < 0.0001) and the CC genotype of rs3789607 of PTPN22 (OR = 2.668; 95% CI = 1.399-5.086; p = 0.0029) consisted in factors independent of the susceptibility to GD. The inheritance of polymorphic genotypes of rs5742909 of CTLA4 was associated with older age at the time of diagnosis (42.90 ± 10.83 versus 38.84 ± 11.81 years old; p = 0.0105), with higher TRAb levels (148.17 ± 188.90 U/L versus 112.14 ± 208.54 U/L; p = 0.0229) and the need for higher therapeutic doses of radioiodine (64.23 ± 17.16 versus 50.22 ± 16.86; p = 0.0237). The inheritance of the CC genotype of rs1883832 CD40 gene was more frequent among women (69.65%) than men (52.00%; p = 0.0186). The polymorphic genotype of PPARG gene (rs1801282) was associated with TPOAb positivity (p = 0.0391), and the GG genotype of rs2476601 of PTPN22 gene was associated with positivity for both TgAb (p = 0.0360) and TPOAb (p < 0.0001). Both polymorphic genotypes rs2476601 and rs3789607 of the PTPN22 gene were more frequent among nonsmoking patients (p = 0.0102 and p = 0.0124, respectively). CONCLUSIONS: Our data confirm the important role of CTLA4 polymorphisms in GD susceptibility; demonstrate the role of PTPN22 polymorphisms in patients' clinical features; and suggest these genes may influence the severity of the disease.