Homing peptide-conjugated gold nanorods: the effect of amino acid sequence display on nanorod uptake and cellular proliferation.

Gold nanorods (GNRs) have attracted significant interest in the field of medicine as theranostic agents for both imaging and photothermal ablation of cancerous cells/tissues. Targeting theranostic GNRs specifically to cancer cells is necessary to enhance treatment efficacy and minimize undesired side effects. In this study, targeting functionalized GNR to EphA2 receptors that are overexpressed on prostate cancer cells was investigated as a strategy to achieve enhanced GNR uptake by cancer cells. In addition, the influence of targeting peptide orientation on functionalized GNR uptake by PC-3 cells was explored. GNRs of aspect ratio 4 were functionalized with an EphA2 homing peptide, YSA, using a layer-by-layer polypeptide wrapping approach. In parallel, an analogous population of YSA-modified GNRs, which display a reversed YSA peptide, with the N- and C- termini reversed, was also prepared. GC-MS analysis of the YSA-GNRs indicated that functionalized GNRs displayed approximately 3000 peptides/GNR. The functionalized GNRs remained well-dispersed in biological media for short times (<24 h). An increase in GNRs uptake of the YSA-GNRs by PC-3 cells, compared to the reversed YSA-GNRs, was observed under identical incubation conditions. Lastly, the effect of the YSA-GNRs binding to EphA2 receptors on prostate cancer cell proliferation was also studied. The YSA-functionalized GNRs inhibit PC-3 proliferation at a significantly lower effective dose than free YSA. Overall, the polypeptide LBL deposition technique provides a facile route to target nanoparticles to overexpressed cellular receptors, with the caveat that the specific orientation and display of the targeting moiety plays a critical role in the interaction between the nanoparticle and the cell.

The Primarily Undergraduate Nanomaterials Cooperative: A New Model for Supporting Collaborative Research at Small Institutions on a National Scale.

The Primarily Undergraduate Nanomaterials Cooperative (PUNC) is an organization for research-active faculty studying nanomaterials at Primarily Undergraduate Institutions (PUIs), where undergraduate teaching and research go hand-in-hand. In this perspective, we outline the differences in maintaining an active research group at a PUI compared to an R1 institution. We also discuss the work of PUNC, which focuses on community building, instrument sharing, and facilitating new collaborations. Currently consisting of 37 members from across the United States, PUNC has created an online community consisting of its Web site (nanocooperative.org), a weekly online summer group meeting program for faculty and students, and a Discord server for informal conversations. Additionally, in-person symposia at ACS conferences and PUNC-specific conferences are planned for the future. It is our hope that in the years to come PUNC will be seen as a model organization for community building and research support at primarily undergraduate institutions.

Bifunctional polyacrylamide based polymers for the specific binding of hexahistidine tagged proteins on gold surfaces.

We describe a modified bifunctional analogue of polyacrylamide that spontaneously forms self-assembled polymeric thin films on Au surfaces. The film is engineered to specifically bind histidine tagged proteins (6His), while simultaneously remaining inherently resistant to the non-specific adsorption of proteins in solution. The backbone of a polyacrylamide-co-n-acryloxysuccinimide copolymer is functionalized via tandem active ester (NHS) couplings with 3-(methylthio)propylamine (MTP) and nitrilotriacetic acid (NTA). The resulting functionalized polymers form stable and exceptionally hydrophilic thin films that are approximately 2-5 nm thick, a mass coverage that varies with the MTP graft density. These films are characterized using a variety of techniques (X-ray photoelectron spectroscopy (XPS), reflection absorption infrared spectroscopy (RAIRS), ellipsometry, surface plasmon resonance (SPR), and matrix assisted laser desorption ionization (MALDI)) to establish their structure and function. The protein resistance of the films, as demonstrated by their exposure to solutions of bovine serum albumin (BSA), can be modulated by the amount of MTP grafted to the polymer, which in turn, affects their mass coverage. We show that it is possible to specifically capture hexahistidine tagged proteins with low incidences of nonspecific adsorption using these materials, a discrimination quantified using surface plasmon resonance (SPR) at concentrations down to approximately 20 nM. These polymers also bind strongly to the surfaces of Au nanoparticles, stabilizing them against aggregation, providing them with a similar capacity to selectively bind 6His tagged proteins that can then be speciated using MALDI.

Quantitative measurement of sodium polystyrene sulfonate adsorption onto CTAB capped gold nanoparticles reveals hard and soft coronas.

Accumulated evidence indicates that nanoparticle behavior in complex biological environments strongly depends on the nanoparticles' surface chemistry. A common way to modify nanoparticles is to deposit oppositely charged molecules on the surfaces in a Layer-by-Layer fashion to build up thin films of polymers. While this polymer coating is a well-developed technique, the quantification of polymers deposited and physical mechanism of polymer deposition remain relatively unstudied. In this work CTAB capped gold nanoparticles, synthesized in a flow reactor, are coated with sodium polystyrene sulfonate and purified through a series of equilibrium dialysis steps. Throughout the process, zeta potential, UV-Vis spectroscopy, DLS, and TEM are used to monitor the physiochemical properties of the nanoparticless while ICP-OES is used to quantify polyelectrolyte deposition. Through these measurements, we find that traditional purification techniques result in particles that likely consist of both a tightly bound hard corona and a loosely-bound soft corona of polymers. Finally, we quantify the relative numbers of polymers in each corona which are approximately 100 and 1000 polymer molecules per nanoparticle for the hard and soft coronas, respectively, and use these to propose a binding model for the hard corona.

Mass spectrometric imaging of peptide release from neuronal cells within microfluidic devices.

Microfluidic devices are well suited for manipulating and measuring mass limited samples. Here we adapt a microfluidic device containing functionalized surfaces to chemically stimulate a small number of neurons (down to a single neuron), collect the release of neuropeptides, and characterize them using mass spectrometry. As only a small fraction of the peptides present in a neuron are released with physiologically relevant stimulations, the amount of material available for measurement is small, thereby requiring minimal sample loss and high-sensitivity detection. Although a number of detection schemes are used with microfluidic devices, mass spectrometric detection is used here because of its high information content, allowing the characterization of the released peptide complement. Rather than using an on-line approach, off-line analysis is used; after collection of the peptides onto a surface, mass spectrometric imaging interrogates that surface to determine the peptides released from the cell. The overall utility of this scheme is demonstrated using several device formats with measurement of neuropeptides released from Aplysia californica bag cell neurons.

Differential uptake of gold nanoparticles by 2 species of tadpole, the wood frog (Lithobates sylvaticus) and the bullfrog (Lithobates catesbeianus).

Engineered nanoparticles are aquatic contaminants of emerging concern that exert ecotoxicological effects on a wide variety of organisms. We exposed cetyltrimethylammonium bromide-capped spherical gold nanoparticles to wood frog and bullfrog tadpoles with conspecifics and in combination with the other species continuously for 21 d, then measured uptake and localization of gold. Wood frog tadpoles alone and in combination with bullfrog tadpoles took up significantly more gold than bullfrogs. Bullfrog tadpoles in combination with wood frogs took up significantly more gold than controls. The rank order of weight-normalized gold uptake was wood frogs in combination > wood frogs alone > bullfrogs in combination > bullfrogs alone > controls. In all gold-exposed groups of tadpoles, gold was concentrated in the anterior region compared with the posterior region of the body. The concentration of gold nanoparticles in the anterior region of wood frogs both alone and in combination with bullfrogs was significantly higher than the corresponding posterior regions. We also measured depuration time of gold in wood frogs. After 21 d in a solution of gold nanoparticles, tadpoles lost >83% of internalized gold when placed in gold-free water for 5 d. After 10 d in gold-free water, tadpoles lost 94% of their gold. After 15 d, gold concentrations were below the level of detection. Our finding of differential uptake between closely related species living in similar habitats with overlapping geographical distributions argues against generalizing toxicological effects of nanoparticles for a large group of organisms based on measurements in only one species. Environ Toxicol Chem 2017;36:3351-3358. © 2017 SETAC.

Phase transfer of citrate stabilized gold nanoparticles using nonspecifically adsorbed polymers.

Many synthetic approaches for gold nanoparticles rely on an aqueous media, resulting in water-soluble nanoparticles, which limits the ability to incorporate gold nanoparticles into other organic solvents or hydrophobic polymeric composites. Surface functionalization and phase transfer approaches using alkylthiols or alkylamines, which strongly bind the gold surface, are common routes to overcome this limitation, however they are typically challenging methods. In this paper we report an approach to transport citrate capped gold nanoparticles into a variety of solvents, including ones that are hydrophobic and not miscible with water without the need for phase transfer agents. We suspend gold nanoparticles in a water-miscible polar organic solvent that also is a solvent for a hydrophobic polymer. After drying, polymer-stabilized gold nanoparticles were found to be dispersible in various hydrophobic solvents with maintained colloidal stability. This work investigates two hydrophobic polymers, namely (polymethylmethacrylate and polyvinylacetate), which share common chemical motifs but have significantly different physiochemical properties. Interestingly, a significant difference in their ability to stabilize the transferred gold nanoparticles is observed and discussed.

Long-term exposure to gold nanoparticles accelerates larval metamorphosis without affecting mass in wood frogs (Lithobates sylvaticus) at environmentally relevant concentrations.

Nanoparticles are environmental contaminants of emerging concern. Exposure to engineered nanoparticles has been shown to have detrimental effects on aquatic organisms. The authors synthesized gold nanoparticles (18.1 ± 3.5 nm) and tested their effects on time to and weight at metamorphosis in wood frog (Lithobates sylvaticus) tadpoles, a species known to be sensitive to environmental stressors. Continuous exposure to all concentrations of gold nanoparticles (0.05 pM, 0.5 pM, and 5 pM in particles) for up to 55 d significantly reduced time to metamorphosis by as much as an average of 3 d (p < 0.05). However, exposure to gold nanoparticles had no effect on tadpole mass at metamorphosis. The approximately 18-nm gold nanoparticles used were metastable in dechlorinated tap water, resulting in a change in surface charge and aggregation over time, leading to negatively charged aggregates that were on the order of 60 nm to 110 nm. Nanoparticle aggregation could exacerbate the effect on time to metamorphosis. To the authors' knowledge, the present study is the first report on the effect of engineered nanoparticles of any kind on life-history variables in an amphibian, a taxonomic group that has been declining globally for at least 25 yr. Environ Toxicol Chem 2016;35:2304-2310. © 2016 SETAC.

Quantitative reflection imaging of fixed Aplysia californica pedal ganglion neurons on nanostructured plasmonic crystals.

Studies of the interactions between cells and surrounding environment including cell culture surfaces and their responses to distinct chemical and physical cues are essential to understanding the regulation of cell growth, migration, and differentiation. In this work, we demonstrate the capability of a label-free optical imaging technique-surface plasmon resonance (SPR)-to quantitatively investigate the relative thickness of complex biomolecular structures using a nanoimprinted plasmonic crystal and laboratory microscope. Polyelectrolyte films of different thicknesses deposited by layer-by-layer assembly served as the model system to calibrate the reflection contrast response originating from SPRs. The calibrated SPR system allows quantitative analysis of the thicknesses of the interface formed between the cell culture substrate and cellular membrane regions of fixed Aplysia californica pedal ganglion neurons. Bandpass filters were used to isolate spectral regions of reflected light with distinctive image contrast changes. Combining of the data from images acquired using different bandpass filters leads to increase image contrast and sensitivity to topological differences in interface thicknesses. This SPR-based imaging technique is restricted in measurable thickness range (∼100-200 nm) due to the limited plasmonic sensing volume, but we complement this technique with an interferometric analysis method. Described here simple reflection imaging techniques show promise as quantitative methods for analyzing surface thicknesses at nanometer scale over large areas in real-time and in physicochemical diverse environments.

Gold nanorods: their potential for photothermal therapeutics and drug delivery, tempered by the complexity of their biological interactions.

Gold nanorods have promising applications in the fields of drug delivery and photothermal therapy. These promises arise from the nanorods' unique optical and photothermal properties, the availability of synthetic protocols that can tune the size and shape of the particles, the ability to modify the surface and conjugate drugs/molecules to the nanorods, and the relative biocompatibility of gold nanorods. In this review, current progress in using gold nanorods as phototherapeutic agents and as drug delivery vehicles is summarized. Issues of dosage, toxicity and biological interactions at three levels (biological media alone; cells; whole organisms) are discussed, concluding with recommendations for future work in this area.

Polyelectrolyte coating provides a facile route to suspend gold nanorods in polar organic solvents and hydrophobic polymers.

The widely used and versatile polyelectrolyte layer-by-layer (LbL) nanoparticle coating strategy allows for gold nanorods to be transferred from aqueous media into a broad range of polar organic solvents without aggregation. The uniform dispersity and stability of the nanorods in organic solvents allows for uniform incorporation of nanorods into a variety of hydrophobic polymers.