Tunable Emission of Low-Dimensional Organic Metal Halides by Stoichiometric Ratio and Metal Center.

Low-dimensional (LD) organic metal halides (OMHs) have a bright future due to their excellent photoelectric characteristics and unique structure. However, the synthesis and emission control of LD-OMHs are still unclear. Herein, the different dimensional (zero-dimensional (0D), one-dimensional (1D), and three-dimensional (3D)) of OMHs were obtained by the reaction of 1,4-diazabicyclo (2.2.2) octane with PbBr2 in different stoichiometric ratios. This discovery shows that the structure and properties of OMHs can be regulated while maintaining the functional organic cations of OMHs, which broadens the path for the development of functional LD-OMHs. Among them, 0D-OMH 1 and 1D-OMH 3 have narrow-band (full width at half-maximum (fwhm) = 74 nm) and broad-band (fwhm = 201 nm) emission, respectively. We found that when organic cations have no contribution to the formation of conduction band minimum and valence band maximum, and the distances between polyhedrons are larger than the van der Waals diameter of the halogen atom, the effect of phonons on exciton transitions can be reduced to achieve a narrow-band emission. Further, Cu(I)- and Mn (II)-based 0D-OMHs were synthesized, which have high photoluminescence quantum yield (PLQY) (33.97 and 47.33%, respectively). When the emitting of 0D-OMHs produced by the interaction of the metal-center and halogens, the asymmetric planar metal-halogen structure will result in a higher PLQY.

Photoluminescence Enhancement in Silica-Confined Ligand-Free Perovskite Nanocrystals by Suppression of Silanol-Induced Traps and Phase Impurities.

The detriments of intrinsic silanol groups in mesoporous silica to the photoluminescence (PL) of lead halide perovskite nanocrystals (LHP NCs) confined in the template have never been determined and clearly elucidated. Here, we disclose that silanol-induced Cs+ and Br- deficiencies prompt the generation of traps and CsPb2Br5 impurities. The temperature-dependent PL spectra verify the higher energetic barrier of trap states in CsPbBr3 NCs confined in silanol-rich mesoporous silica. Femtosecond transient absorption spectra reveal the trapped state mediates a broadband photoinduced absorption and long-lived decay pathway of CsPbBr3 NCs in silanol-rich templates. A remarkable improvement (up to 160-fold) in PL quantum yields is realized by simple silanol elimination. This work demonstrates the detrimental effects of silanol sites on the PL properties of LHP NCs impregnated in mesoporous silica and provides a new perspective for the ligand-free synthesis of high-quality LHP NCs in mesoporous templates by facile impregnation for practical applications.

Organic Sulfonium-Stabilized High-Efficiency Cesium or Methylammonium Lead Bromide Perovskite Nanocrystals.

Herein, we report a new X-type ligand, i.e., organic sulfonium bromide, for high-efficiency CsPbBr3 and MAPbBr3 (MA=methylammonium) perovskite nanocrystals (PNCs). We first confirmed the facile synthesis of the titled ligands in N,N-dimethylformamide at room temperature. By reacting dodecylmethylsulfide with allyl bromide, (3-bromopropyl)trimethoxysilane, and 1,4-dibromobutane, respectively, three representative ligands (named DAM, DSM, and DMM) are acquired. All of them result in CsPbBr3 and MAPbBr3 PNCs with near-unity photoluminescence quantum yield (PLQY) and decent ambient stability (no less than 90 % PLQY after 2 months) using a room-temperature ligand-assisted reprecipitation technique. Among them, DSM and DMM endow CsPbBr3 PNCs with higher thermal/light stability arising from the cross-linkable or bidentate ligand structure. Further, DSM-CsPbBr3 PNCs can be incorporated into polystyrene through in situ thermal polymerization and the composite shows a record-high PLQY of 93.8 %.

Ultrasensitive Temperature Sensing Based on Ligand-Free Alloyed CsPbClx Br3-x Perovskite Nanocrystals Confined in Hollow Mesoporous Silica with High Density of Halide Vacancies.

Temperature sensing based on fluorescent semiconductor nanocrystals has recently received immense attention. Enhancing the trap-facilitated thermal quenching of the fluorescence should be an effective approach to achieve high sensitivity for temperature sensing. Compared with conventional semiconductor nanocrystals, the defect-tolerant feature of lead halide perovskite nanocrystals (LHP NCs) endows them with high density of defects. Here, hollow mesoporous silica (h-SiO2 ) template-assisted ligand-free synthesis and halogen manipulation (chloride-importing) are proposed to fabricate highly defective yet fluorescent CsPbCl1.2 Br1.8 NCs confined in h-SiO2 (CsPbCl1.2 Br1.8 NCs@h-SiO2 ) for ultrasensitive temperature sensing. The trap barrier heights, exciton-phonon scattering, and trap state filling process in the CsPbCl1.2 Br1.8 NCs@h-SiO2 and CsPbBr3 NCs@h-SiO2 are studied to illustrate the higher temperature sensitivity of CsPbCl1.2 Br1.8 NCs@h-SiO2 at physiological temperature range. By integrating the thermal-sensitive CsPbCl1.2 Br1.8 NCs@h-SiO2 and thermal-insensitive K2 SiF6 :Mn4+ phosphor into the flexible ethylene-vinyl acetate polymer matrix, ratiometric temperature sensing from 30.0 °C to 45.0 °C is demonstrated with a relative temperature sensitivity up to 13.44% °C-1 at 37.0 °C. The composite film shows high potential as a thermometer for monitoring the body temperature. This work demonstrates the unparalleled temperature sensing performance of LHP NCs and provides new inspiration on switching the defects into advantages in sensing applications.

Tunable Aggregation-Induced Emission of Imidazole Hydrazones by pH and Anions.

Aggregation-induced emission (AIE) materials have drawn great attention for applications as organic light-emitting diodes (OLED) and probes. The applications are, however, restricted by the complex syntheses and hydrophobic properties. Herein, a one-step synthesis of an AIE material based on imidazole hydrazone is assessed. Protonation of the imidazole-H leads to emission color change from yellow to green in the solid state. The emission color is recovered upon imidazole-H+ deprotonation. Moreover, the emission wavelength shifts from 532 to 572 nm by anion exchange. In addition, an enhanced emission (ΦF up to 22.6 %) was obtained with the Br- anion compared with NTf2 - , SbCl5 - , PF6 - , and OTf- anions. X-ray crystallography studies together with theoretical calculations show that the enhanced emission of hydrazone salts arises from strong hydrogen bonding between the hydrazone proton and the halide ion (Cl- or Br- ).

Microbial communities change in an anaerobic digestion after application of microbial electrolysis cells.

Microbial electrolysis cells (MECs) are being studied to improve the efficiency of anaerobic digesters and biogas production. In the present study, we investigated the effects of electrochemical reactions in AD-MEC (anaerobic digester combined with MECs) on changes in the microbial communities of bulk sludge through 454-pyrosequencing analysis, as well as the effect of these changes on anaerobic digestion. Methanobacterium beijingense and Methanobacterium petrolearium were the dominant archaeal species in AD, while Methanosarcina thermophila and Methanobacterium formicicum were dominant in AD-MEC at steady-state. There were no substantial differences in dominant bacterial species. Clostridia class was more abundant than Bacteroidia class in both reactors. Compared to AD, AD-MEC showed a 40% increase in overall bacterial population, increasing the removal of organic matters and the conversion of volatile fatty acids (VFAs). Thus, the MEC reaction more effectively converts organic matters to VFAs and activates microbial communities favorable for methane production.