Synthetic spike-in standards for high-throughput 16S rRNA gene amplicon sequencing.

High-throughput sequencing of 16S rRNA gene amplicons (16S-seq) has become a widely deployed method for profiling complex microbial communities but technical pitfalls related to data reliability and quantification remain to be fully addressed. In this work, we have developed and implemented a set of synthetic 16S rRNA genes to serve as universal spike-in standards for 16S-seq experiments. The spike-ins represent full-length 16S rRNA genes containing artificial variable regions with negligible identity to known nucleotide sequences, permitting unambiguous identification of spike-in sequences in 16S-seq read data from any microbiome sample. Using defined mock communities and environmental microbiota, we characterized the performance of the spike-in standards and demonstrated their utility for evaluating data quality on a per-sample basis. Further, we showed that staggered spike-in mixtures added at the point of DNA extraction enable concurrent estimation of absolute microbial abundances suitable for comparative analysis. Results also underscored that template-specific Illumina sequencing artifacts may lead to biases in the perceived abundance of certain taxa. Taken together, the spike-in standards represent a novel bioanalytical tool that can substantially improve 16S-seq-based microbiome studies by enabling comprehensive quality control along with absolute quantification.

Lentimicrobium saccharophilum gen. nov., sp. nov., a strictly anaerobic bacterium representing a new family in the phylum Bacteroidetes, and proposal of Lentimicrobiaceae fam. nov.

A novel, strictly anaerobic, short rod-shaped bacterium, designated strain TBC1T, was isolated from methanogenic granular sludge in a full-scale mesophilic upflow anaerobic sludge blanket reactor treating high-strength starch-based organic wastewater. Cells of this strain were 2-4 µm long and 0.4-0.6 µm wide. They were non-motile and Gram-stain-negative. The optimum growth temperature was 30-37 °C, with a range of 20-40 °C. The optimum pH for growth was around pH 7.0, while growth occurred in a range of pH 6.5-9.0. Strain TBC1T grew chemo-organotrophically on a narrow range of carbohydrates under anaerobic conditions. Yeast extract was required for its growth. The major fermentative end products from glucose, supplemented with yeast extract, were acetate, malate, propionate, formate and hydrogen. Doubling time under optimal growth conditions was estimated to be 1 day. The DNA G+C content of strain TBC1T was 49.2 mol% as determined by HPLC. Major cellular fatty acids were C16 : 0, C18 : 0, C16 : 1ω9c and C18 : 1ω9c. Based on its 16S rRNA gene sequence, strain TBC1T was shown to represent a distinct lineage at the family level in the phylum Bacteroidetes. Among previously described species of this phylum, Mucilaginibacter boryungensis BDR-9T (Sphingobacteriaceae) displayed the highest sequence similarity (85.9 %) with strain TBC1T. Phylogenomic analyses using 38-83 single copy marker genes also supported the novelty of strain TBC1T at the family level. Based on its characteristics, strain TBC1T (=JCM 30898T=DSM 100618T) is considered to be the type strain of a novel species of a new genus, Lentimicrobium saccharophilum gen. nov., sp. nov. A new family, Lentimicrobiaceae fam. nov., is also proposed encompassing the strain and related environmental 16S rRNA gene clone sequences.

Isolation and characterization of Flexilinea flocculi gen. nov., sp. nov., a filamentous, anaerobic bacterium belonging to the class Anaerolineae in the phylum Chloroflexi.

A novel obligately anaerobic bacterium, designated strain TC1T, was isolated from methanogenic granular sludge in a full-scale mesophilic upflow anaerobic sludge blanket reactor treating high-strength starch-based wastewater. Cells had a multicellular filamentous morphology, stained Gram-negative and were non-motile. The filaments were flexible, generally >100 µm long and 0.3-0.4 µm wide. Growth of the isolate was observed at 25-43 °C (optimum 37 °C) and pH 6.0-8.5 (optimum pH 7.0). Strain TC1T grew chemo-organotrophically on a range of carbohydrates under anaerobic conditions. Yeast extract was required for growth. The major fermentative end products of glucose, supplemented with yeast extract, were acetate, lactate, succinate, propionate, formate and hydrogen. Co-cultivation with the hydrogenotrophic methanogen Methanospirillum hungatei DSM 864T enhanced growth of the isolate. The DNA G+C content was determined experimentally to be 42.1 mol%. The major cellular fatty acids were anteiso-C15 : 0, iso-C15 : 0 and iso-C17 : 0 3-OH. Based on 16S rRNA gene sequence analysis, strain TC1T belonged to the class Anaerolineae in the phylum Chloroflexi, in which Ornatilinea apprima P3M-1T was its closest phylogenetic relative (88.3 % nucleotide identity). Phylogenomic analyses using 38 and 83 single-copy marker genes also supported the novelty of strain TC1T at least at the genus level. Based on phylogenetic, genomic and phenotypic characteristics, we propose that strain TC1T represents a novel species of a new genus, for which we suggest the name Flexilinea flocculi gen. nov., sp. nov. The type strain of Flexilinea flocculi is strain TC1T ( = JCM 30897T = CGMCC 1.5202T).

Complete Genome Sequence of Anaerostipes hadrus JCM 17467T.

We report a complete genome sequence of Anaerostipes hadrus JCM 17467T. The genome consists of a circular chromosome of 2,804,089 bp, with a G+C content of 37.3%. The genome was predicted to contain 21 rRNA genes, 65 tRNA genes, and 2,675 protein-coding sequences.

Complete Genome Sequence of Coprobacter fastidiosus JCM 33896T.

We generated a complete genome sequence of Coprobacter fastidiosus JCM 33896T by nanopore sequencing. The genome consists of a single circular chromosome of 3,444,538 bp with a G+C content of 38.4%. Annotation predicted 15 rRNA genes, 67 tRNA genes and 2,662 protein-coding sequences.

Complete genome sequence of Butyricimonas faecihominis JCM 18676T.

We report a complete genome sequence of Butyricimonas faecihominis JCM 18676T, generated by nanopore sequencing. The genome consists of a single circular chromosome of 4,851,806 bp, with a G + C content of 42.9%, and was predicted to contain 15 rRNA and 61 tRNA genes and encode for 3,946 proteins.

Complete genome sequences of Ruminococcus torques strains JCM 36208 and JCM 36209, isolated from the feces of a healthy Japanese male.

Here, we report the complete genome sequences of two Ruminococcus torques strains (JCM 36208 and JCM 36209) that were newly isolated from the feces of a healthy Japanese male. Both genomes consist of a single circular chromosome with a length of ~2.8 Mbp and a G+C content of 41.8%.

Complete genome sequence of Blautia luti JCM 17040T.

We generated a complete genome sequence of the type strain of Blautia luti (JCM 17040T = DSM 14534T) by Nanopore sequencing. The genome consists of a circular chromosome of 3,741,599 bp with a G + C content of 42.9% and was predicted to contain 3,431 protein-coding sequences.

A large-scale genomically predicted protein mass database enables rapid and broad-spectrum identification of bacterial and archaeal isolates by mass spectrometry.

MALDI-TOF MS-based microbial identification relies on reference spectral libraries, which limits the screening of diverse isolates, including uncultured lineages. We present a new strategy for broad-spectrum identification of bacterial and archaeal isolates by MALDI-TOF MS using a large-scale database of protein masses predicted from nearly 200,000 publicly available genomes. We verify the ability of the database to identify microorganisms at the species level and below, achieving correct identification for > 90% of measured spectra. We further demonstrate its utility by identifying uncultured strains from mouse feces with metagenomics, allowing the identification of new strains by customizing the database with metagenome-assembled genomes.

Elucidating colorectal cancer-associated bacteria through profiling of minimally perturbed tissue-associated microbiota.

Sequencing-based interrogation of gut microbiota is a valuable approach for detecting microbes associated with colorectal cancer (CRC); however, such studies are often confounded by the effect of bowel preparation. In this study, we evaluated the viability of identifying CRC-associated mucosal bacteria through centimeter-scale profiling of the microbiota in tumors and adjacent noncancerous tissue from eleven patients who underwent colonic resection without preoperative bowel preparation. High-throughput 16S rRNA gene sequencing revealed that differences between on- and off-tumor microbiota varied considerably among patients. For some patients, phylotypes affiliated with genera previously implicated in colorectal carcinogenesis, as well as genera with less well-understood roles in CRC, were enriched in tumor tissue, whereas for other patients, on- and off-tumor microbiota were very similar. Notably, the enrichment of phylotypes in tumor-associated mucosa was highly localized and no longer apparent even a few centimeters away from the tumor. Through short-term liquid culturing and metagenomics, we further generated more than one-hundred metagenome-assembled genomes, several representing bacteria that were enriched in on-tumor samples. This is one of the first studies to analyze largely unperturbed mucosal microbiota in tissue samples from the resected colons of unprepped CRC patients. Future studies with larger cohorts are expected to clarify the causes and consequences of the observed variability in the emergence of tumor-localized microbiota among patients.

A polymer microfluidic chip for quantitative detection of multiple water- and foodborne pathogens using real-time fluorogenic loop-mediated isothermal amplification.

Inexpensive, portable, and easy-to-use devices for rapid detection of microbial pathogens are needed to ensure safety of water and food. In this study, a disposable polymer microfluidic chip for quantitative detection of multiple pathogens using isothermal nucleic acid amplification was developed. The chip contains an array of 15 interconnected reaction wells with dehydrated primers for loop-mediated isothermal amplification (LAMP), and requires only a single pipetting step for dispensing of sample. To improve robustness of loading and amplification, hydrophobic air vents and microvalves were monolithically integrated in the multi-layered structure of the chip using an inexpensive knife plotter. For quantification, LAMP was performed with a highly fluorescent DNA binding dye (SYTO-82) and the reactions monitored in real-time using a low-cost fluorescence imaging system previously developed by our group (Ahmad et al., Biomed. Microdevices 13(5), 929-937). Starting from genomic DNA mixtures, the chip was successfully evaluated for rapid analysis of multiple virulence and marker genes of Salmonella, Campylobacter jejuni, Shigella, and Vibrio cholerae, enabling detection and quantification of 10-100 genomes per µl in less than 20 min. It is anticipated that the microfluidic chip, along with the real-time imaging system, may be a key enabling technology for developing inexpensive and portable systems for on-site screening of multiple pathogens relevant to food and water safety.

Characterization and Demonstration of Mock Communities as Control Reagents for Accurate Human Microbiome Community Measurements.

Standardization and quality assurance of microbiome community analysis by high-throughput DNA sequencing require widely accessible and well-characterized reference materials. Here, we report on newly developed DNA and whole-cell mock communities to serve as control reagents for human gut microbiota measurements by shotgun metagenomics and 16S rRNA gene amplicon sequencing. The mock communities were formulated as near-even blends of up to 20 bacterial species prevalent in the human gut, span a wide range of genomic guanine-cytosine (GC) contents, and include multiple strains with Gram-positive type cell walls. Through a collaborative study, we carefully characterized the mock communities by shotgun metagenomics, using previously developed standardized protocols for DNA extraction and sequencing library construction. Further, we validated fitness of the mock communities for revealing technically meaningful differences among protocols for DNA extraction and metagenome/16S rRNA gene amplicon library construction. Finally, we used the mock communities to reveal varying performance of metagenome-based taxonomic profilers and the impact of trimming and filtering of sequencing reads on observed species profiles. The latter showed that aggressive preprocessing of reads may result in substantial GC-dependent bias and should thus be carefully evaluated to minimize unintended effects on species abundances. Taken together, the mock communities are expected to support a myriad of applications that rely on well-characterized control reagents, ranging from evaluation and optimization of methods to assessment of reproducibility in interlaboratory studies and routine quality control. IMPORTANCE Application of high-throughput DNA sequencing has greatly accelerated human microbiome research and its translation into new therapeutic and diagnostic capabilities. Microbiome community analyses results can, however, vary considerably across studies or laboratories, and establishment of measurement standards to improve accuracy and reproducibility has become a priority. The here-developed mock communities, which are available from the NITE Biological Resource Center (NBRC) at the National Institute of Technology and Evaluation (NITE, Japan), provide well-characterized control reagents that allow users to judge the accuracy of their measurement results. Widespread and consistent adoption of the mock communities will improve reproducibility and comparability of microbiome community analyses, thereby supporting and accelerating human microbiome research and development.

A CCD-based fluorescence imaging system for real-time loop-mediated isothermal amplification-based rapid and sensitive detection of waterborne pathogens on microchips.

Rapid, sensitive, and low-cost pathogen diagnostic systems are needed for early disease diagnosis and treatment, especially in resource-limited settings. This study reports a low-cost charge-coupled device (CCD)-based fluorescence imaging system for rapid detection of waterborne pathogens by isothermal gene amplification in disposable microchips. Fluorescence imaging capability of this monochromatic CCD camera is evaluated by optimizing the gain, offset, and exposure time. This imaging system is validated for 12 virulence genes of major waterborne pathogens on cyclic olefin polymer (COP) microchips, using SYTO-82 dye and real time fluorescence loop-mediated isothermal amplification referred here as microRT(f)-LAMP. Signal-to-noise ratio (SNR) and threshold time (Tt) of microRT(f)-LAMP assays are compared with those from a commercial real-time polymerase chain reaction (PCR) instrument. Applying a CCD exposure of 5 s to 10(5) starting DNA copies of microRT(f)-LAMP assays increases the SNR by 8-fold and reduces the Tt by 9.8 min in comparison to a commercial real-time PCR instrument. Additionally, single copy level sensitivity for Campylobacter jejuni 0414 gene is obtained for microRT(f)-LAMP with a Tt of 19 min, which is half the time of the commercial real-time PCR instrument. Due to the control over the exposure time and the wide field imaging capability of CCD, this low-cost fluorescence imaging system has the potential for rapid and parallel detection of pathogenic microorganisms in high throughput microfluidic chips.

Multi-Omics Analysis to Generate Hypotheses for Mild Health Problems in Monkeys.

Certain symptoms associated with mild sickness and lethargy have not been categorized as definitive diseases. Confirming such symptoms in captive monkeys (Macaca fascicularis, known as cynomolgus monkeys) can be difficult; however, it is possible to observe and analyze their feces. In this study, we investigated the relationship between stool state and various omics data by considering objective and quantitative values of stool water content as a phenotype for analysis. By examining the food intake of the monkeys and assessing their stool, urine, and plasma, we attempted to obtain a comprehensive understanding of the health status of individual monkeys and correlate it with the stool condition. Our metabolomics data strongly suggested that many lipid-related metabolites were correlated with the stool water content. The lipidomic analysis revealed the involvement of saturated and oxidized fatty acids, metallomics revealed the contribution of selenium (a bio-essential trace element), and intestinal microbiota analysis revealed the association of several bacterial species with the stool water content. Based on our results, we hypothesize that the redox imbalance causes minor health problems. However, it is not possible to make a definite conclusion using multi-omics alone, and other hypotheses could be proposed.

Microdroplet-based system for culturing of environmental microorganisms using FNAP-sort.

Droplet microfluidics has emerged as a powerful technology for improving the culturing efficiency of environmental microorganisms. However, its widespread adoption has been limited due to considerable technical challenges, especially related to identification and manipulation of individual growth-positive droplets. Here, we combined microfluidic droplet technology with on-chip "fluorescent nucleic acid probe in droplets for bacterial sorting" (FNAP-sort) for recovery of growth-positive droplets and droplet microdispensing to establish an end-to-end workflow for isolation and culturing of environmental microbes. As a proof-of-concept, we demonstrate the ability of our technique to yield high-purity cultures of rare microorganisms from a representative complex environmental microbiome. As our system employs off-the-shelf commercially available equipment, we believe that it can be readily adopted by others and may thus find widespread use toward culturing the high proportion of as-of-yet uncultured microorganisms in different biomes.

Validation and standardization of DNA extraction and library construction methods for metagenomics-based human fecal microbiome measurements.

BACKGROUND: Validation and standardization of methodologies for microbial community measurements by high-throughput sequencing are needed to support human microbiome research and its industrialization. This study set out to establish standards-based solutions to improve the accuracy and reproducibility of metagenomics-based microbiome profiling of human fecal samples. RESULTS: In the first phase, we performed a head-to-head comparison of a wide range of protocols for DNA extraction and sequencing library construction using defined mock communities, to identify performant protocols and pinpoint sources of inaccuracy in quantification. In the second phase, we validated performant protocols with respect to their variability of measurement results within a single laboratory (that is, intermediate precision) as well as interlaboratory transferability and reproducibility through an industry-based collaborative study. We further ascertained the performance of our recommended protocols in the context of a community-wide interlaboratory study (that is, the MOSAIC Standards Challenge). Finally, we defined performance metrics to provide best practice guidance for improving measurement consistency across methods and laboratories. CONCLUSIONS: The validated protocols and methodological guidance for DNA extraction and library construction provided in this study expand current best practices for metagenomic analyses of human fecal microbiota. Uptake of our protocols and guidelines will improve the accuracy and comparability of metagenomics-based studies of the human microbiome, thereby facilitating development and commercialization of human microbiome-based products. Video Abstract.

Complete Genome Sequence of Flavonifractor plautii JCM 32125T.

We report the complete genome sequence of Flavonifractor plautii JCM 32125T (=VPI 0310T). The genome consists of a single circular chromosome of 3,985,392 bp (G+C content, 60.9%) and was predicted to contain 3 complete sets of rRNA genes, 63 tRNA genes, and 3,764 protein-coding sequences.

Complete Genome Sequence of Blautia producta JCM 1471T.

We report a complete genome sequence of Blautia producta JCM 1471T The genome consists of a single circular chromosome of 6,197,116 bp with a G+C content of 45.7%. The genome was annotated as containing 5 complete sets of rRNA genes, 70 tRNA genes, and 5,516 protein-coding sequences.

Complete Genome Sequence of Collinsella aerofaciens JCM 10188T.

We report a complete genome sequence of Collinsella aerofaciens JCM 10188T (=VPI 1003T). The genome consists of a circular chromosome (2,428,218 bp with 60.6% G+C content) and two extrachromosomal elements. The genome was predicted to contain 5 sets of rRNA genes, 58 tRNA genes, and 2,079 protein-encoding sequences.

Complete Genome Sequence of Megamonas funiformis JCM 14723T.

We announce the complete genome sequence of Megamonas funiformis JCM 14723T (YIT 11815T). The genome consists of a circular chromosome (2,522,577 bp, 31.5% G+C content) and a plasmid of 46,189 bp (29.4% G+C content). The genome was predicted to contain 6 rRNA operons, 53 tRNA genes, and 2,440 protein-coding sequences.