RESUMO
Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) have emerged as a new class of crystalline layered conducting materials that hold significant promise for applications in electronics and spintronics. However, current 2D c-MOFs are mainly made from organic planar ligands, whereas layered 2D c-MOFs constructed by curved or twisted ligands featuring novel orbital structures and electronic states remain less developed. Herein, we report a Cu-catecholate wavy 2D c-MOF (Cu3(HFcHBC)2) based on a fluorinated core-twisted contorted hexahydroxy-hexa-cata-hexabenzocoronene (HFcHBC) ligand. We show that the resulting film is composed of rod-like single crystals with lengths up to â¼4 µm. The crystal structure is resolved by high-resolution transmission electron microscopy (HRTEM) and continuous rotation electron diffraction (cRED), indicating a wavy honeycomb lattice with AA-eclipsed stacking. Cu3(HFcHBC)2 is predicted to be metallic based on theoretical calculation, while the crystalline film sample with numerous grain boundaries apparently exhibits semiconducting behavior at the macroscopic scale, characterized by obvious thermally activated conductivity. Temperature-dependent electrical conductivity measurements on the isolated single-crystal devices indeed demonstrate the metallic nature of Cu3(HFcHBC)2, with a very weak thermally activated transport behavior and a room-temperature conductivity of 5.2 S cm-1. Furthermore, the 2D c-MOFs can be utilized as potential electrode materials for energy storage, which display decent capacity (163.3 F g-1) and excellent cyclability in an aqueous 5 M LiCl electrolyte. Our work demonstrates that wavy 2D c-MOF using contorted ligands are capable of intrinsic metallic transport, marking the emergence of new conductive MOFs for electronic and energy applications.
RESUMO
The migration of ionic defects and electrochemical reactions with metal electrodes remains one of the most important research challenges for organometal halide perovskite optoelectronic devices. There is still a lack of understanding of how the formation of mobile ionic defects impact charge carrier transport and operational device stability, particularly in perovskite field-effect transistors (FETs), which tend to exhibit anomalous device characteristics. Here, the evolution of the n-type FET characteristics of one of the most widely studied materials, Cs0.05 FA0.17 MA0.78 PbI3, is investigated during repeated measurement cycles as a function of different metal source-drain contacts and precursor stoichiometry. The channel current increases for high work function metals and decreases for low work function metals when multiple cycles of transfer characteristics are measured. The cycling behavior is also sensitive to the precursor stoichiometry. These metal/stoichiometry-dependent device non-idealities are correlated with the quenching of photoluminescence near the positively biased electrode. Based on elemental analysis using electron microscopy the observations can be understood by an n-type doping effect of metallic ions that are created by an electrochemical interaction at the metal-semiconductor interface and migrate into the channel. The findings improve the understanding of ion migration, contact reactions, and the origin of non-idealities in lead triiodide perovskite FETs.
RESUMO
Low n-doping efficiency and inferior stability restrict the thermoelectric performance of n-type conjugated polymers, making their performance lag far behind of their p-type counterparts. Reported here are two rigid coplanar poly(p-phenylene vinylene) (PPV) derivatives, LPPV-1 and LPPV-2, which show nearly torsion-free backbones. The fused electron-deficient rigid structures endow the derivatives with less conformational disorder and low-lying lowest unoccupied molecular orbital (LUMO) levels, down to -4.49â eV. After doping, two polymers exhibited high n-doping efficiency and significantly improved air stability. LPPV-1 exhibited a high conductivity of up to 1.1â S cm-1 and a power factor as high as 1.96â µW m-1 K-2 . Importantly, the power factor of the doped LPPV-1 thick film degraded only 2 % after 7â day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high-performance and potentially air-stable n-type polymer thermoelectrics.
RESUMO
Thiazoloisoindigo, a novel structural variation of isoindigo, is for the first time utilized to synthesize conjugated polymers. The polymer based on thiazoloisoindigo merges the advantages of the one based on thienoisoindigo and diazaisoindigo; it not only exhibits a greatly redshifted UV/Vis absorption to the near-infrared region owing to its strong tendency to form quinoidal structures, similar to that based on thienoisoindigo, but also shows excellent ambipolar mobility (hole: 3.93, electron: 1.07â cm2 V-1 s-1 ) in organic field-effect transistors (OFETs), superior to that based on diazaisoindigo, showing the strong electron-withdrawing capability of thiazoloisoindigo.
RESUMO
Organic semiconductors for spin-based devices require long spin relaxation times. Understanding their spin relaxation mechanisms is critical to organic spintronic devices and applications for quantum information processing. However, reports on the spin relaxation mechanisms of organic conjugated molecules are rare and the research methods are also limited. Herein, we study the molecular design and spin relaxation mechanisms by systematically varying the structure of a conjugated radical. We found that solid-state relaxation times of organic materials are largely different from that in solution state. We demonstrate that substitution of a lower gyromagnetic ratio nucleus (e. g. D, Cl) on the para-position of the aryl rings in the triphenylmethyl (TM) radical can significantly improve their coherence times (Tm ). Flexible thin films based on such radicals exhibit ultra-long spin-lattice relaxation times (T1 ) up to 35.6(6)â µs and Tm up to 1.08(4) µs under ambient conditions, which are among the longest values in films. More importantly, using the TM radical derivative (5CM), we observed room-temperature quantum coherence and Rabi cycles in thin film for the first time, suggesting that organic conjugated radicals have great potentials for spin-based information processing.
RESUMO
A new electron-deficient unit with a fused 5-membered heterocyclic ring was developed by replacing a cyclopenta-1,3-diene from electron-rich donor indacenodithiophene (IDT) with a cyclohepta-4,6-diene-1,3-diimde unit. The imide bridge endows dithienylbenzenebisimide (BBI) with a fixed planar configuration and low energy levels for both the highest occupied molecular orbital (HOMO; -6.24â eV) and the lowest unoccupied molecular orbit (LUMO; -2.57â eV). Organic field-effect transistors (OFETs) based on BBI polymers exhibit electron mobility up to 0.34â cm2 V-1 s-1 , which indicates that the BBI is a promising n-type building block for optoelectronics.
RESUMO
2D conjugated coordination polymers (cCPs) based on square-planar transition metal-complexes (such as MO4, M(NH)4, and MS4, M = metal) are an emerging class of (semi)conducting materials that are of great interest for applications in supercapacitors, catalysis, and thermoelectrics. Finding synthetic approaches to high-performance nickel-nitrogen (Ni-N) based cCP films is a long-standing challenge. Here, a general, dynamically controlled on-surface synthesis that produces highly conductive Ni-N-based cCP films is developed and the thermoelectric properties as a function of the molecular structure and their dependence on interactions with ambient atmosphere are studied. Among the four studied cCPs with different ligand sizes hexaminobenzene- and hexaaminotriphenylene-based films exhibit record electrical conductivity (100-200 S cm-1) in this Ni-N based cCP family, which is one order of magnitude higher than previous reports, and the highest thermoelectric power factors up to 10 µW m-1 K-2 among reported 2D cCPs. The transport physics of these films is studied and it is shown that depending on the host-guest interaction with oxygen/water the majority carrier type and the value of the Seebeck coefficient can be largely regulated. The high conductivity is likely reflecting good interconnectivity between (small) ordered domains and grain boundaries supporting disordered metallic transport.
RESUMO
Doping is a crucial strategy to enhance the performance of various organic electronic devices. However, in many cases, the random distribution of dopants in conjugated polymers leads to the disruption of the polymer microstructure, severely constraining the achievable performance of electronic devices. Here, it is shown that by ion-exchange doping polythiophene-based P[(3HT)1-x-stat-(T)x] (x = 0 (P1), 0.12 (P2), 0.24 (P3), and 0.36 (P4)), remarkably high electrical conductivity of >400 S cm-1 and power factor of >16 µW m-1 K-2 are achieved for the random copolymer P3, ranking it among highest ever reported for unaligned P3HT-based films, significantly higher than that of P1 (<40 S cm-1, <4 µW m-1 K-2). Although both polymers exhibit comparable field-effect transistor hole mobilities of ≈0.1 cm2 V-1 s-1 in the pristine state, after doping, Hall effect measurements indicate that P3 exhibits a large Hall mobility up to 1.2 cm2 V-1 s-1, significantly outperforming that of P1 (0.06 cm2 V-1 s-1). GIWAXS measurement determines that the in-plane π-π stacking distance of doped P3 is 3.44 Å, distinctly shorter than that of doped P1 (3.68 Å). These findings contribute to resolving the long-standing dopant-induced-disorder issues in P3HT and serve as an example for achieving fast charge transport in highly doped polymers for efficient electronics.
RESUMO
Thermoelectric (TE) technology attracts much attention due to the fact it can convert thermal energy into electricity and vice versa. Thin-film TE materials can be synthesized on different kinds of substrates, which offer the possibility of the control of microstructure and composition to higher TE power, as well as the development of novel TE devices meeting flexible and miniature requirements. In this work, we use magnetron sputtering to deposit N-type and P-type BiTe-based thin films on silicon, glass, and Kapton HN polyimide foil. Their morphology, microstructure, and phase constituents are studied by SEM/EDX, XRD, and TEM. The electrical conductivity, thermal conductivity, and Seebeck coefficient of the thin film are measured by a special in-plane advanced test system. The output of electrical power (open-circuit voltage and electric current) of the thin film is measured by an in-house apparatus at different temperature gradient. The impact of deposition parameters and the thickness, width, and length of the thin film on the power output are also investigated for optimizing the thin-film flexible TE device to harvest thermal energy.
RESUMO
Conjugated polymer field-effect transistors are emerging as an enabling technology for flexible electronics due to their excellent mechanical properties combined with sufficiently high charge-carrier mobilities and compatibility with large-area, low-temperature processing. However, their electrical stability remains a concern. ON-state (accumulation mode) bias-stress instabilities in organic semiconductors have been widely studied, and multiple mitigation strategies have been suggested. In contrast, OFF-state (depletion mode) bias-stress instabilities remain poorly understood despite being crucial for many applications in which the transistors are held in their OFF-state for most of the time. Here, a simple method of using an antisolvent treatment is presented to achieve significant improvements in OFF-state bias-stress and environmental stability as well as general device performance for one of the best performing polymers, solution-processable indacenodithiophene-co-benzothiadiazole (IDT-BT). IDT-BT is weakly crystalline, and the notable improvements to an antisolvent-induced, increased degree of crystallinity, resulting in a lower probability of electron trapping and the removal of charge traps is attributed. The work highlights the importance of the microstructure in weakly crystalline polymer films and offers a simple processing strategy for achieving the reliability required for applications in flexible electronics.
RESUMO
n-Type organic electrochemical transistors (OECTs) and organic field-effect transistors (OFETs) are less developed than their p-type counterparts. Herein, polynaphthalenediimide (PNDI)-based copolymers bearing novel fluorinated selenophene-vinylene-selenophene (FSVS) units as efficient materials for both n-type OECTs and n-type OFETs are reported. The PNDI polymers with oligo(ethylene glycol) (EG7) side chains P(NDIEG7-FSVS), affords a high µC* of > 0.2 F cm-1 V-1 s-1 , outperforming the benchmark n-type Pg4NDI-T2 and Pg4NDI-gT2 by two orders of magnitude. The deep-lying LUMO of -4.63 eV endows P(NDIEG7-FSVS) with an ultra-low threshold voltage of 0.16 V. Moreover, the conjugated polymer with octyldodecyl (OD) side chains P(NDIOD-FSVS) exhibits a surprisingly low energetic disorder with an Urbach energy of 36 meV and an ultra-low activation energy of 39 meV, resulting in high electron mobility of up to 0.32 cm2 V-1 s-1 in n-type OFETs. These results demonstrate the great potential for simultaneously achieving a lower LUMO and a tighter intermolecular packing for the next-generation efficient n-type organic electronics.
RESUMO
The charge transport properties of conjugated polymers are commonly limited by the energetic disorder. Recently, several amorphous conjugated polymers with planar backbone conformations and low energetic disorder have been investigated for applications in field-effect transistors and thermoelectrics. However, there is a lack of strategy to finely tune the interchain π-π contacts of these polymers that severely restricts the energetic disorder of interchain charge transport. Here, we demonstrate that it is feasible to achieve excellent conductivity and thermoelectric performance in polymers based on thiophene-fused benzodifurandione oligo(p-phenylenevinylene) through reducing the crystallization rate of side chains and, in this way, carefully controlling the degree of interchain π-π contacts. N-type (p-type) conductivities of more than 100 S cm-1 (400 S cm-1) and power factors of more than 200 µW m-1 K-2 (100 µW m-1 K-2) were achieved within a single polymer doped by different dopants. It further demonstrated the state-of-the-art power output of the first flexible single-polymer thermoelectric generator.
RESUMO
The field of organic electronics has profited from the discovery of new conjugated semiconducting polymers that have molecular backbones which exhibit resilience to conformational fluctuations, accompanied by charge carrier mobilities that routinely cross the 1 cm2/Vs benchmark. One such polymer is indacenodithiophene-co-benzothiadiazole. Previously understood to be lacking in microstructural order, we show here direct evidence of nanosized domains of high order in its thin films. We also demonstrate that its device-based high-performance electrical and thermoelectric properties are not intrinsic but undergo rapid stabilization following a burst of ambient air exposure. The polymer's nanomechanical properties equilibrate on longer timescales owing to an orthogonal mechanism; the gradual sweating-out of residual low molecular weight solvent molecules from its surface. We snapshot the quasistatic temporal evolution of the electrical, thermoelectric and nanomechanical properties of this prototypical organic semiconductor and investigate the subtleties which play on competing timescales. Our study documents the untold and often overlooked story of a polymer device's dynamic evolution toward stability.
RESUMO
Solution-processable highly conductive polymers are of great interest in emerging electronic applications. For p-doped polymers, conductivities as high a nearly 105 S cm-1 have been reported. In the case of n-doped polymers, they often fall well short of the high values noted above, which might be achievable, if much higher charge-carrier mobilities determined could be realized in combination with high charge-carrier densities. This is in part due to inefficient doping and dopant ions disturbing the ordering of polymers, limiting efficient charge transport and ultimately the achievable conductivities. Here, n-doped polymers that achieve a high conductivity of more than 90 S cm-1 by a simple solution-based co-deposition method are reported. Two conjugated polymers with rigid planar backbones, but with disordered crystalline structures, exhibit surprising structural tolerance to, and excellent miscibility with, commonly used n-dopants. These properties allow both high concentrations and high mobility of the charge carriers to be realized simultaneously in n-doped polymers, resulting in excellent electrical conductivity and thermoelectric performance.
RESUMO
N-doping plays an irreplaceable role in controlling the electron concentration of organic semiconductors thus to improve performance of organic semiconductor devices. However, compared with many mature p-doping methods, n-doping of organic semiconductor is still of challenges. In particular, dopant stability/processability, counterion-semiconductor immiscibility and doping induced microstructure non-uniformity have restricted the application of n-doping in high-performance devices. Here, we report a computer-assisted screening approach to rationally design of a triaminomethane-type dopant, which exhibit extremely high stability and strong hydride donating property due to its thermally activated doping mechanism. This triaminomethane derivative shows excellent counterion-semiconductor miscibility (counter cations stay with the polymer side chains), high doping efficiency and uniformity. By using triaminomethane, we realize a record n-type conductivity of up to 21 S cm-1 and power factors as high as 51 µW m-1 K-2 even in films with thicknesses over 10 µm, and we demonstrate the first reported all-polymer thermoelectric generator.
RESUMO
Over the past three decades, the mobility of organic field-effect transistors (OFETs) has been improved from 10-5 up to over 10 cm2 V-1 s-1, which reaches or has already satisfied the requirements of demanding applications. However, pronounced nonideal behaviors in current-voltage characteristics are commonly observed, which indicates that the reported mobilities may not truly reflect the device properties. Herein, a comprehensive understanding of the origins of several observed nonidealities (downward, upward, double-slope, superlinear, and humped transfer characteristics) is summarized, and how to extract comparatively reliable mobilities from nonideal behaviors in OFETs is discussed. Combining an overview of the ideal and state-of-the-art OFETs, considerable possible approaches are also provided for future OFETs.
RESUMO
Organic field-effect transistors (OFETs) with impressively high hole mobilities over 10 cm2 V-1 s-1 and electron mobilities over 1 cm2 V-1 s-1 have been reported in the past few years. However, significant non-ideal electrical characteristics, e.g., voltage-dependent mobilities, have been widely observed in both small-molecule and polymer systems. This issue makes the accurate evaluation of the electrical performance impossible and also limits the practical applications of OFETs. Here, a semiconductor-unrelated, charge-trapping-induced non-ideality in OFETs is reported, and a revised model for the non-ideal transfer characteristics is provided. The trapping process can be directly observed using scanning Kelvin probe microscopy. It is found that such trapping-induced non-ideality exists in OFETs with different types of charge carriers (p-type or n-type), different types of dielectric materials (inorganic and organic) that contain different functional groups (OH, NH2 , COOH, etc.). As fas as it is known, this is the first report for the non-ideal transport behaviors in OFETs caused by semiconductor-independent charge trapping. This work reveals the significant role of dielectric charge trapping in the non-ideal transistor characteristics and also provides guidelines for device engineering toward ideal OFETs.
RESUMO
A novel electron-deficient building block, 5,5'-diazaisoindigo (5DNIID), was synthesized through a facile method in good yield. As a derivative of isoindigo, 5DNIID shows an ultra-low LUMO level of -3.92â eV after incorporation of two electron-deficient nitrogen atoms into the para-position of the amine groups in the isoindigo π skeleton. Modified polymerization conditions were applied to efficiently afford the donor-acceptor (D-A) conjugated polymer 5DNIID-2T, which exhibited a p-type charge transport property.
RESUMO
A naphthalimide-based fluorescent ensemble probe NPC for selectively detecting His in aqueous solution (10 mM HEPES, pH 7.4) has been reported. Moreover, the application of NPC in in vivo (both in Hela cells and in C. elegans) fluorescence imaging was carried out as well.
Assuntos
Cobre/farmacologia , Corantes Fluorescentes/farmacologia , Histidina/metabolismo , Naftalimidas/farmacologia , Animais , Caenorhabditis elegans , Diagnóstico por Imagem , Células HeLa , Humanos , SoluçõesRESUMO
An easily available naphthalimide-based fluorescent probe NPA for Pb(2+) detection was successfully developed. NPA exhibited an obvious fluorescence turn-on response toward Pb(2+) in aqueous solution and in living cells. Moreover, a series of model compounds were rationally designed and synthesized in order to explore the sensing mechanism and binding mode of NPA with Pb(2+) .