RESUMO
Biliary ducts collect bile from liver lobules, the smallest functional and anatomical units of liver, and carry it to the gallbladder. Disruptions in this process caused by defective embryonic development, or through ductal reaction in liver disease have a major impact on life quality and survival of patients. A deep understanding of the processes underlying bile duct lumen formation is crucial to identify intervention points to avoid or treat the appearance of defective bile ducts. Several hypotheses have been proposed to characterize the biophysical mechanisms driving initial bile duct lumen formation during embryogenesis. Here, guided by the quantification of morphological features and expression of genes in bile ducts from embryonic mouse liver, we sharpened these hypotheses and collected data to develop a high resolution individual cell-based computational model that enables to test alternative hypotheses in silico. This model permits realistic simulations of tissue and cell mechanics at sub-cellular scale. Our simulations suggest that successful bile duct lumen formation requires a simultaneous contribution of directed cell division of cholangiocytes, local osmotic effects generated by salt excretion in the lumen, and temporally-controlled differentiation of hepatoblasts to cholangiocytes, with apical constriction of cholangiocytes only moderately affecting luminal size.
Assuntos
Ductos Biliares/metabolismo , Modelos Biológicos , Animais , Células Epiteliais/metabolismo , Camundongos , MorfogêneseRESUMO
Actin protrusion dynamics plays an important role in the regulation of three-dimensional (3D) cell migration. Cells form protrusions that adhere to the surrounding extracellular matrix (ECM), mechanically probe the ECM and contract in order to displace the cell body. This results in cell migration that can be directed by the mechanical anisotropy of the ECM. However, the subcellular processes that regulate protrusion dynamics in 3D cell migration are difficult to investigate experimentally and therefore not well understood. Here, we present a computational model of cell migration through a degradable viscoelastic ECM. This model is a 2D representation of 3D cell migration. The cell is modeled as an active deformable object that captures the viscoelastic behavior of the actin cortex and the subcellular processes underlying 3D cell migration. The ECM is regarded as a viscoelastic material, with or without anisotropy due to fibrillar strain stiffening, and modeled by means of the meshless Lagrangian smoothed particle hydrodynamics (SPH) method. ECM degradation is captured by local fluidization of the material and permits cell migration through the ECM. We demonstrate that changes in ECM stiffness and cell strength affect cell migration and are accompanied by changes in number, lifetime and length of protrusions. Interestingly, directly changing the total protrusion number or the average lifetime or length of protrusions does not affect cell migration. A stochastic variability in protrusion lifetime proves to be enough to explain differences in cell migration velocity. Force-dependent adhesion disassembly does not result in faster migration, but can make migration more efficient. We also demonstrate that when a number of simultaneous protrusions is enforced, the optimal number of simultaneous protrusions is one or two, depending on ECM anisotropy. Together, the model provides non-trivial new insights in the role of protrusions in 3D cell migration and can be a valuable contribution to increase the understanding of 3D cell migration mechanics.
Assuntos
Actinas , Movimento Celular/fisiologia , Matriz Extracelular , Modelos Biológicos , Actinas/química , Actinas/metabolismo , Actinas/fisiologia , Biologia Computacional , Simulação por Computador , Elasticidade/fisiologia , Matriz Extracelular/química , Matriz Extracelular/metabolismo , ViscosidadeRESUMO
Model simulations indicate that the response of growing cell populations on mechanical stress follows the same functional relationship and is predictable over different cell lines and growth conditions despite experimental response curves look largely different. We develop a hybrid model strategy in which cells are represented by coarse-grained individual units calibrated with a high resolution cell model and parameterized by measurable biophysical and cell-biological parameters. Cell cycle progression in our model is controlled by volumetric strain, the latter being derived from a bio-mechanical relation between applied pressure and cell compressibility. After parameter calibration from experiments with mouse colon carcinoma cells growing against the resistance of an elastic alginate capsule, the model adequately predicts the growth curve in i) soft and rigid capsules, ii) in different experimental conditions where the mechanical stress is generated by osmosis via a high molecular weight dextran solution, and iii) for other cell types with different growth kinetics from the growth kinetics in absence of external stress. Our model simulation results suggest a generic, even quantitatively same, growth response of cell populations upon externally applied mechanical stress, as it can be quantitatively predicted using the same growth progression function.
Assuntos
Mecanotransdução Celular/fisiologia , Modelos Biológicos , Esferoides Celulares/fisiologia , Células Tumorais Cultivadas/fisiologia , Animais , Linhagem Celular Tumoral , Forma Celular/fisiologia , Biologia Computacional , Humanos , CamundongosRESUMO
Adhesion governs to a large extent the mechanical interaction between a cell and its microenvironment. As initial cell spreading is purely adhesion driven, understanding this phenomenon leads to profound insight in both cell adhesion and cell-substrate interaction. It has been found that across a wide variety of cell types, initial spreading behavior universally follows the same power laws. The simplest cell type providing this scaling of the radius of the spreading area with time are modified red blood cells (RBCs), whose elastic responses are well characterized. Using a mechanistic description of the contact interaction between a cell and its substrate in combination with a deformable RBC model, we are now able to investigate in detail the mechanisms behind this universal power law. The presented model suggests that the initial slope of the spreading curve with time results from a purely geometrical effect facilitated mainly by dissipation upon contact. Later on, the spreading rate decreases due to increasing tension and dissipation in the cell's cortex as the cell spreads more and more. To reproduce this observed initial spreading, no irreversible deformations are required. Since the model created in this effort is extensible to more complex cell types and can cope with arbitrarily shaped, smooth mechanical microenvironments of the cells, it can be useful for a wide range of investigations where forces at the cell boundary play a decisive role.
Assuntos
Fenômenos Biomecânicos/fisiologia , Fenômenos Fisiológicos Celulares/fisiologia , Eritrócitos/citologia , Eritrócitos/fisiologia , Modelos Biológicos , Forma Celular/fisiologia , Biologia Computacional , Elasticidade/fisiologiaRESUMO
In the egg industry, fast and highly reliable quality measurements are crucial. This study presents a novel method based on Hertz contact theory that allows for non-destructive determination of eggshell strength. The goal of the study was to evaluate the material strength (Young's Modulus) and structural strength (stiffness) of eggshells. To this end, an experimental setup was constructed to measure the collision of an eggshell with a small steel ball, which was recorded using a laser vibrometer. The study analyzed a sample of 120 eggs and found a correlation of 0.85 between the traditional static stiffness measured during quasi-static compression tests and the stiffness obtained from the Hertz contact theory. The results show that Hertz contact theory is valid for small steel spheres impacting eggshells, while a sensitivity analysis indicated that the most important factor in determining the strength of the eggshell is the contact duration between the egg and the impactor. These results open up the possibility of grading eggs based on their shell strength in a non-destructive manner.
RESUMO
Eggshell strength is a critical quality factor for consumption eggs as it affects the probability of breakage in practice. In this study, a fast and low-cost methodology for the non-destructive determination of eggshell strength is presented. The method utilized a small steel ball to impact the egg and a microphone to analyse the impact characteristics. Hertz contact theory was applied to relate the measured impact characteristics to the local stiffness of the eggshell. Therefore, a total of 150 eggs were studied on which eight consecutive measurements per egg were taken around the equator at equidistant places. The results showed a strong correlation of 0.93 between the traditional static stiffness measured during quasi-static compression tests and the average stiffness obtained from the new methodology. This paves the way towards fast, low-cost and non-destructive in-line shell strength measurements to reduce the number of cracked eggs reaching the consumer.
RESUMO
Human pluripotent stem cells (hPSCs) have emerged as the most promising cellular source for cell therapies. To overcome the scale-up limitations of classical 2D culture systems, suspension cultures have been developed to meet the need for large-scale culture in regenerative medicine. Despite constant improvements, current protocols that use microcarriers or generate cell aggregates only achieve moderate amplification performance. Here, guided by reports showing that hPSCs can self-organize in vitro into cysts reminiscent of the epiblast stage in embryo development, we developed a physio-mimetic approach for hPSC culture. We engineered stem cell niche microenvironments inside microfluidics-assisted core-shell microcapsules. We demonstrate that lumenized three-dimensional colonies significantly improve viability and expansion rates while maintaining pluripotency compared to standard hPSC culture platforms such as 2D cultures, microcarriers, and aggregates. By further tuning capsule size and culture conditions, we scale up this method to industrial-scale stirred tank bioreactors and achieve an unprecedented hPSC amplification rate of 277-fold in 6.5 days. In brief, our findings indicate that our 3D culture system offers a suitable strategy both for basic stem cell biology experiments and for clinical applications.
Assuntos
Técnicas de Cultura de Células , Células-Tronco Pluripotentes , Humanos , Técnicas de Cultura de Células/métodos , Diferenciação Celular , Células Cultivadas , Reatores BiológicosRESUMO
Mathematical models are increasingly designed to guide experiments in biology, biotechnology, as well as to assist in medical decision making. They are in particular important to understand emergent collective cell behavior. For this purpose, the models, despite still abstractions of reality, need to be quantitative in all aspects relevant for the question of interest. This paper considers as showcase example the regeneration of liver after drug-induced depletion of hepatocytes, in which the surviving and dividing hepatocytes must squeeze in between the blood vessels of a network to refill the emerged lesions. Here, the cells' response to mechanical stress might significantly impact the regeneration process. We present a 3D high-resolution cell-based model integrating information from measurements in order to obtain a refined and quantitative understanding of the impact of cell-biomechanical effects on the closure of drug-induced lesions in liver. Our model represents each cell individually and is constructed by a discrete, physically scalable network of viscoelastic elements, capable of mimicking realistic cell deformation and supplying information at subcellular scales. The cells have the capability to migrate, grow, and divide, and the nature and parameters of their mechanical elements can be inferred from comparisons with optical stretcher experiments. Due to triangulation of the cell surface, interactions of cells with arbitrarily shaped (triangulated) structures such as blood vessels can be captured naturally. Comparing our simulations with those of so-called center-based models, in which cells have a largely rigid shape and forces are exerted between cell centers, we find that the migration forces a cell needs to exert on its environment to close a tissue lesion, is much smaller than predicted by center-based models. To stress generality of the approach, the liver simulations were complemented by monolayer and multicellular spheroid growth simulations. In summary, our model can give quantitative insight in many tissue organization processes, permits hypothesis testing in silico, and guide experiments in situations in which cell mechanics is considered important.
Assuntos
Simulação por Computador , Modelos Biológicos , Algoritmos , Fenômenos Biomecânicos , Calibragem , Adesão Celular , Linhagem Celular Tumoral , Movimento Celular , Proliferação de Células , Citoesqueleto/metabolismo , Hepatócitos/fisiologia , Humanos , Fígado/fisiologia , Neoplasias/patologia , Regeneração/fisiologiaRESUMO
In this study, a cell based lattice free modelling framework is proposed to study cell aggregate behaviour in bone tissue engineering applications. The model encompasses cell-to-cell and cell-environment interactions such as adhesion, repulsion and drag forces. Oxygen, nutrients, waste products, growth factors and inhibitors are explicitly represented in the model influencing cellular behaviour. Furthermore, a model for cell metabolism is incorporated representing the basic enzymic reactions of glycolysis and the Krebs cycle. Various types of cell death such as necrosis, apoptosis and anoikis are implemented. Finally, an explicit model of the cell cycle controls the proliferation process, taking into account the presence or absence of various metabolites, sufficient space and mechanical stress. Several examples are presented demonstrating the potential of the modelling framework. The behaviour of a synchronised cell aggregate under ideal circumstances is simulated, clearly showing the different stages of the cell cycle and the resulting growth of the aggregate. Also the difference in aggregate development under ideal (normoxic) and hypoxic conditions is simulated, showing hypoxia induced necrosis mainly in the centre of the aggregate grown under hypoxic conditions. The next step in this research will be the application of this modelling framework to specific experimental set-ups for bone tissue engineering applications.