RESUMO
We theoretically explore the effect of a transverse electric field on the frictional response of a bi-layer of packed zwitterionic molecules. The dipole-moment reorientation promoted by the electric field can lead to either stick-slip or smooth sliding dynamics, with average shear stress values varying over a wide range. A structure-property relation is revealed by investigating the array of molecules and their mutual orientation and interlocking. Moreover, the thermal friction enhancement previously observed in these molecules is shown to be suppressed by the electric field, recovering the expected thermolubricity at large-enough fields. The same holds for other basic tribological quantities, such as the external load, which can influence friction in opposite ways depending on the strength of the applied electric field. Our findings open a route for the reversible control of friction forces via electric polarization of the sliding surface.
RESUMO
Colloidal probe atomic force microscopy (AFM) allows us to explore sliding friction phenomena in graphite contacts of nominal lateral size up to hundreds of nanometers. It is known that contact formation involves tribo-induced material transfer of graphite flakes from the graphitic substrate to the colloidal probe. In this context, sliding states with nearly vanishing friction, i.e., superlubricity, may set in. A comprehensive investigation of the transfer layer properties is mandatory to ascertain the origin of superlubricity. Here we explore the friction response of micrometric beads, of different size and pristine surface roughness, sliding on graphite under ambient conditions. We show that such tribosystems undergo a robust transition toward a low-adhesion, low-friction state dominated by mechanical interactions at one dominant tribo-induced nanocontact. Friction force spectroscopy reveals that the nanocontact can be superlubric or dissipative, in fact undergoing a load-driven transition from dissipative stick-slip to continuous superlubric sliding. This behavior is excellently described by the thermally activated, single-asperity Prandtl-Tomlinson model. Our results indicate that upon formation of the transfer layer, friction depends on the energy landscape experienced by the topographically highest tribo-induced nanoasperity. We consistently find larger dissipation when the tribo-induced nanoasperity is slid against surfaces with higher atomic corrugation than graphite, like MoS2 and WS2, in prototypical van der Waals layered heterojunctions.
RESUMO
We identify a new material phenomenon, where minute mechanical manipulations induce pronounced global structural reconfigurations in faceted multiwalled nanotubes. This behavior has strong implications on the tribological properties of these systems and may be the key to understand the enhanced interwall friction recently measured for boron-nitride nanotubes with respect to their carbon counterparts. Notably, the fast rotation of helical facets in these systems upon coaxial sliding may serve as a nanoscale Archimedean screw for directional transport of physisorbed molecules.
RESUMO
The adhesive and frictional response of an AFM tip connected to a substrate through supramolecular host-guest complexes is investigated by dynamic Monte Carlo simulations. Here, the variation of the pull-off force with the unloading rate recently observed in experiments is unraveled by evidencing simultaneous (progressive) breaking of the bonds at fast (slow) rates. The model reveals the origin of the observed plateaus in the retraction force as a function of the tip-surface distance, showing that they result from the tip geometrical features. In lateral sliding, the model exhibits a wide range of dynamic behaviors ranging from smooth sliding to stick-slip at different velocities, with the average friction force determined by the characteristic formation/rupture rates of the complexes. In particular, it is shown that for some molecular complexes friction can become almost constant over a wide range of velocities. Also, we show the possibility of exploiting the ageing effect through slide-hold-slide experiments, in order to infer the characteristic formation rate. Finally, our model predicts a novel "anti-ageing" effect which is characterized by a decrease of the static friction force with the hold time. Such an effect is explained in terms of enhancement of adhesion during sliding, especially observed at high driving velocities.
RESUMO
Since the demonstration of superlow friction (superlubricity) in graphite at nanoscale, one of the main challenges in the field of nano- and micromechanics was to scale this phenomenon up. A key question to be addressed is to what extent superlubricity could persist, and what mechanisms could lead to its failure. Here, using an edge-driven Frenkel-Kontorova model, we establish a connection between the critical length above which superlubricity disappears and both intrinsic material properties and experimental parameters. A striking boost in dissipated energy with chain length emerges abruptly due to a high-friction stick-slip mechanism caused by deformation of the slider leading to a local commensuration with the substrate lattice. We derived a parameter-free analytical model for the critical length that is in excellent agreement with our numerical simulations. Our results provide a new perspective on friction and nanomanipulation and can serve as a theoretical basis for designing nanodevices with superlow friction, such as carbon nanotubes.
RESUMO
Colloidal two-dimensional monolayers sliding in an optical lattice are of recent importance as a frictional system. In the general case when the monolayer and optical lattices are incommensurate, we predict two important novelties, one in the static equilibrium structure, the other in the frictional behavior under sliding. Structurally, realistic simulations show that the colloid layer should possess in full equilibrium a small misalignment rotation angle relative to the optical lattice, an effect so far unnoticed but visible in some published experimental moiré patterns. Under sliding, this misalignment has the effect of boosting the colloid monolayer friction by a considerable factor over the hypothetical aligned case discussed so far. A frictional increase of similar origin must generally affect other incommensurate adsorbed monolayers and contacts, to be sought out case by case.
RESUMO
In a pioneer experiment, Bohlein et al. realized the controlled sliding of two-dimensional colloidal crystals over laser-generated periodic or quasi-periodic potentials. Here we present realistic simulations and arguments that besides reproducing the main experimentally observed features give a first theoretical demonstration of the potential impact of colloid sliding in nanotribology. The free motion of solitons and antisolitons in the sliding of hard incommensurate crystals is contrasted with the soliton-antisoliton pair nucleation at the large static friction threshold F(s) when the two lattices are commensurate and pinned. The frictional work directly extracted from particles' velocities can be analyzed as a function of classic tribological parameters, including speed, spacing, and amplitude of the periodic potential (representing, respectively, the mismatch of the sliding interface and the corrugation, or "load"). These and other features suggestive of further experiments and insights promote colloid sliding to a unique friction study instrument.
Assuntos
Coloides/química , Fricção , Modelos Químicos , Modelos Moleculares , Algoritmos , Simulação por Computador , Cinética , Movimento (Física) , Propriedades de SuperfícieRESUMO
Solution-processed few-layer graphene flakes, dispensed to rotating and sliding contacts via liquid dispersions, are gaining increasing attention as friction modifiers to achieve low friction and wear at technologically relevant interfaces. Vanishing friction states, i.e., superlubricity, have been documented for nearly-ideal nanoscale contacts lubricated by individual graphene flakes. However, there is no clear understanding if superlubricity might persist for larger and morphologically disordered contacts, as those typically obtained by incorporating wet-transferred solution-processed flakes into realistic microscale contact junctions. In this study, we address the friction performance of solution-processed graphene flakes by means of colloidal probe atomic force microscopy. We use a state-of-the-art additive-free aqueous dispersion to coat micrometric silica beads, which are then sled under ambient conditions against prototypical material substrates, namely, graphite and the transition metal dichalcogenides (TMDs) MoS2 and WS2. High resolution microscopy proves that the random assembly of the wet-transferred flakes over the silica probes results into an inhomogeneous coating, formed by graphene patches that control contact mechanics through tens-of-nanometers tall protrusions. Atomic-scale friction force spectroscopy reveals that dissipation proceeds via stick-slip instabilities. Load-controlled transitions from dissipative stick-slip to superlubric continuous sliding may occur for the graphene-graphite homojunctions, whereas single- and multiple-slips dissipative dynamics characterizes the graphene-TMD heterojunctions. Systematic numerical simulations demonstrate that the thermally activated single-asperity Prandtl-Tomlinson model comprehensively describes friction experiments involving different graphene-coated colloidal probes, material substrates, and sliding regimes. Our work establishes experimental procedures and key concepts that enable mesoscale superlubricity by wet-transferred liquid-processed graphene flakes. Together with the rise of scalable material printing techniques, our findings support the use of such nanomaterials to approach superlubricity in micro electromechanical systems.
RESUMO
The understanding of friction at nano-scales, ruled by the regular arrangement of atoms, is surprisingly incomplete. Here we provide a unified understanding by studying the interlocking potential energy of two infinite contacting surfaces with arbitrary lattice symmetries, and extending it to finite contacts. We categorize, based purely on geometrical features, all possible contacts into three different types: a structurally lubric contact where the monolayer can move isotropically without friction, a corrugated and strongly interlocked contact, and a newly discovered directionally structurally lubric contact where the layer can move frictionlessly along one specific direction and retains finite friction along all other directions. This novel category is energetically stable against rotational perturbations and provides extreme friction anisotropy. The finite-size analysis shows that our categorization applies to a wide range of technologically relevant materials in contact, from adsorbates on crystal surfaces to layered two-dimensional materials and colloidal monolayers.
RESUMO
The peeling of an immobile adsorbed membrane is a well-known problem in engineering and macroscopic tribology. In the classic setup, picking up at one extreme and pulling off result in a peeling force that is a decreasing function of the pickup angle. As one end is lifted, the detachment front retracts to meet the immobile tail. At the nanoscale, interesting situations arise with the peeling of graphene nanoribbons (GNRs) on gold, as realized, e.g., by atomic force microscopy. The nanosized system shows a constant-force steady peeling regime, where the tip lifting h produces no retraction of the ribbon detachment point, and just an advancement h of the free tail end. This is opposite to the classic case, where the detachment point retracts and the tail end stands still. Here we characterise, by analytical modeling and numerical simulations, a third, experimentally relevant setup where the nanoribbon, albeit structurally lubric, does not have a freely moving tail end, which is instead elastically tethered. Surprisingly, novel nontrivial scaling exponents appear that regulate the peeling evolution. As the detachment front retracts and the tethered tail is stretched, power laws of h characterize the shrinking of the adhered length, the growth of peeling force and the peeling angle. These exponents precede the final total detachment as a critical point, where the entire ribbon eventually hangs suspended between the tip and the tethering spring. These analytical predictions are confirmed by realistic MD simulations, retaining the full atomistic description, also confirming their survival at finite experimental temperatures.
RESUMO
We introduce a model for zwitterionic monolayers and investigate its tribological response to changes in applied load, sliding velocity, and temperature by means of molecular-dynamics simulations. The proposed model exhibits different regimes of motion depending on temperature and sliding velocity. We find a remarkable increase of friction with temperature, which we attribute to the formation and rupture of transient bonds between individual molecules of opposite sliding layers, triggered by the out-of-plane thermal fluctuations of the molecules' orientations. To highlight the effect of the molecular charges, we compare these results with analogous simulations for the charge-free system. These findings are expected to be relevant to nanoscale rheology and tribology experiments of locally-charged lubricated systems such as, e.g., experiments performed on zwitterionic monolayers, phospholipid micelles, or confined polymeric brushes in a surface force apparatus.
RESUMO
Mechanical stiffness, as opposed to softness, is a fundamental property of solids. Its persistence or rheological evolution in vibrating solid-solid nanocontacts is important in physics, materials science and technology. A puzzling apparent liquefaction under oscillatory strain, totally unexpected at room temperature, was suggested by recent experiments on solid gold nano-junctions. Here we show theoretically that realistically simulated nanocontacts actually remain crystalline even under large oscillatory strains. Tensile and compressive slips, respectively of "necking" and "bellying" types, do take place, but recover reversibly even during fast oscillatory cycles. We also show that, counterintuitively, the residual stress remains tensile after both slips, driving the averaged stiffness from positive to negative, thus superficially mimicking a liquid's. Unlike a liquid, however, rheological softening occurs by stick-slip, predicting largely frequency independent stiffness with violent noise in stress and conductance, properties compatible with experiments. The baffling large amplitude rheology of gold nanocontacts and its consequences should apply, with different parameters, to many other metals.
RESUMO
Sliding parts in nanosystems such as nanoelectromechanical systems and nanomotors increasingly involve large speeds, and rotations as well as translations of the moving surfaces; yet, the physics of high-speed nanoscale friction is so far unexplored. Here, by simulating the motion of drifting and of kicked Au clusters on graphite--a workhorse system of experimental relevance--we demonstrate and characterize a new 'ballistic' friction regime at high speed, separate from drift at low speed. The temperature dependence of the cluster slip distance and time, measuring friction, is opposite in these two regimes, consistent with theory. Crucial to both regimes is the interplay of rotations and translations, shown to be correlated in slow drift but anticorrelated in fast sliding. Despite these differences, we find the velocity dependence of ballistic friction to be, like drift, viscous.
RESUMO
Atomic scale friction, an indispensable element of nanotechnology, requires a direct access to, under actual growing shear stress, its successive live phases: from static pinning, to depinning and transient evolution, eventually ushering in steady state kinetic friction. Standard tip-based atomic force microscopy generally addresses the steady state, but the prior intermediate steps are much less explored. Here we present an experimental and simulation approach, where an oscillatory shear force of increasing amplitude leads to a one-shot investigation of all these successive aspects. Demonstration with controlled gold nanocontacts sliding on graphite uncovers phenomena that bridge the gap between initial depinning and large speed sliding, of potential relevance for atomic scale time and magnitude dependent rheology.
RESUMO
Understanding the drift motion and dynamical locking of crystalline clusters on patterned substrates is important for the diffusion and manipulation of nano- and microscale objects on surfaces. In a previous work, we studied the orientational and directional locking of colloidal two-dimensional clusters with triangular structure driven across a triangular substrate lattice. Here we show with experiments and simulations that such locking features arise for clusters with arbitrary lattice structure sliding across arbitrary regular substrates. Similar to triangular-triangular contacts, orientational and directional locking are strongly correlated via the real- and reciprocal-space Moiré patterns of the contacting surfaces. Due to the different symmetries of the surfaces in contact, however, the relation between the locking orientation and the locking direction becomes more complicated compared to interfaces composed of identical lattice symmetries. We provide a generalized formalism which describes the relation between the locking orientation and locking direction with arbitrary lattice symmetries.
RESUMO
Wearless friction force experiments [Science 309, 1354 (2005)10.1126/science.1113239] have recently demonstrated that tribological response in quasicrystals could be related to the exotic atomic structure of the bulk material. Here, by numerical simulations, we address the origin of the experimentally observed friction anisotropy on a twofold decagonal quasicrystal surface. We predict the distinct stick-slip patterns in the lateral force along the periodic and quasiperiodic directions, specifically exploring the temperature dependence that rules the transitions between single and multiple-slip regimes of motion.
RESUMO
Over the recent decades there has been tremendous progress in understanding and controlling friction between surfaces in relative motion. However the complex nature of the involved processes has forced most of this work to be of rather empirical nature. Two very distinctive physical systems, hard two-dimensional layered materials and soft microscopic systems, such as optically or topographically trapped colloids, have recently opened novel rationally designed lines of research in the field of tribology, leading to a number of new discoveries. Here, we provide an overview of these emerging directions of research, and discuss how the interplay between hard and soft matter promotes our understanding of frictional phenomena.
RESUMO
Crystalline solids typically contain large amounts of defects such as dislocations and interstitials. How they travel across grain boundaries (GBs) under external stress is crucial to understand the mechanical properties of polycrystalline materials. Here, we experimentally and theoretically investigate with single-particle resolution how the atomic structure of GBs affects the dynamics of interstitial defects driven across monolayer colloidal polycrystals. Owing to the complex inherent GB structure, we observe a rich dynamical behavior of defects near GBs. Below a critical driving force defects cannot cross GBs, resulting in their accumulation near these locations. Under certain conditions, defects are reflected at GBs, leading to their enrichment at specific regions within polycrystals. The channeling of defects within samples of specifically-designed GB structures opens up the possibility to design novel materials that are able to confine the spread of damage to certain regions.
RESUMO
Design and synthesis of an HDAC inhibitor and its merger with three tubulin binders to create releasable conjugate compounds is described. The biological evaluation includes: (a) in vitro reactivity with glutathione, (b) antiproliferative activity, (c) cell cycle analysis and (d) quantification of protein acetylation. The cellular pharmacology study indicated that the HDAC-inhibitor-drug conjugates retained antimitotic and proapoptotic activity with a reduced potency.
Assuntos
Antineoplásicos/farmacologia , Desenho de Fármacos , Glutationa/metabolismo , Histona Desacetilase 2/antagonistas & inibidores , Tubulina (Proteína)/química , Acetilação/efeitos dos fármacos , Antineoplásicos/síntese química , Antineoplásicos/química , Ciclo Celular/efeitos dos fármacos , Células HeLa , Histona Desacetilases/química , Humanos , Proteínas Associadas aos Microtúbulos/metabolismo , Microtúbulos/efeitos dos fármacos , Processamento de Proteína Pós-Traducional , Estrutura Terciária de Proteína , Relação Estrutura-Atividade , Tubulina (Proteína)/metabolismoRESUMO
In the framework of Langevin dynamics, we demonstrate clear evidence of the peculiar quantized sliding state, previously found in a simple one-dimensional boundary lubricated model [A. Vanossi et al., Phys. Rev. Lett. 97, 056101 (2006)], for a substantially less idealized two-dimensional description of a confined multilayer solid lubricant under shear. This dynamical state, marked by a nontrivial "quantized" ratio of the averaged lubricant center-of-mass velocity to the externally imposed sliding speed, is recovered, and shown to be robust against the effects of thermal fluctuations, quenched disorder in the confining substrates, and over a wide range of loading forces. The lubricant softness, setting the width of the propagating solitonic structures, is found to play a major role in promoting in-registry commensurate regions beneficial to this quantized sliding. By evaluating the force instantaneously exerted on the top plate, we find that this quantized sliding represents a dynamical "pinned" state, characterized by significantly low values of the kinetic friction. While the quantized sliding occurs due to solitons being driven gently, the transition to ordinary unpinned sliding regimes can involve lubricant melting due to large shear-induced Joule heating, for example at large speed.