Synchrotron radiation X-ray diffraction computed tomography (XRDCT): a new tool in cultural heritage and stone conservation for 3D non-destructive probing and phase analysis of inorganic re-treatments.

The issue of preserving carbonatic stones of cultural heritage (CH) restored in the past that have undergone new decay phenomena is strongly emerging and conservation science has not yet found a reliable solution. In this paper, we propose the application of synchrotron radiation X-ray diffraction computed tomography (XRDCT) to explore the effects of using inorganic-mineral products (ammonium oxalate; ammonium phosphate) in sequence as a novel, compatible and effective re-treatment approach to consolidate decayed carbonatic stones already treated with inorganic-mineral treatments. High-quality XRDCT datasets were used to qualitatively/quantitatively investigate and 3D localize the complex mixture of crystalline phases formed after the conservation re-treatments within a porous carbonatic stone substrate. The XRDCT reconstruction images and the structural refinements of XRD patterns with the Rietveld methods showed that the phase composition of reaction products, their volume distribution, and weight fraction vary as a function of the treatment sequence and penetration depth. The high potential of XRDCT allows (i) assessment of peculiar trends of each treatment/treatment sequence; (ii) exploration of the reaction steps of the sequential treatments and (iii) demonstration of the consolidating effect of inorganic re-treatments, non-destructively and at the micron scale. Above all, our study (i) provides new analytical tools to support the conservation choices, (ii) showcases new analytical possibilities for XRDCT in conservation science, including in investigations of CH materials and decay processes, and (iii) opens up new perspectives in analytical chemistry and material characterisation for the non-destructive and non-invasive analysis of reactions within heterogeneous polycrystalline systems.

Correction: 5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode.

Correction for '5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode' by Jonas Sottmann et al., Phys. Chem. Chem. Phys., 2022, 24, 27075-27085, https://doi.org/10.1039/D2CP03892G.

Mapping the structural trends in zinc aluminosilicate glasses.

The structure of zinc aluminosilicate glasses with the composition (ZnO)x(Al2O3)y(SiO2)1-x-y, where 0 ≤ x < 1, 0 ≤ y < 1, and x + y < 1, was investigated over a wide composition range by combining neutron and high-energy x-ray diffraction with 27Al magic angle spinning nuclear magnetic resonance spectroscopy. The results were interpreted using an analytical model for the composition-dependent structure in which the zinc ions do not act as network formers. Four-coordinated aluminum atoms were found to be in the majority for all the investigated glasses, with five-coordinated aluminum atoms as the main minority species. Mean Al-O bond distances of 1.764(5) and 1.855(5) Å were obtained for the four- and five-coordinated aluminum atoms, respectively. The coordination environment of zinc was not observed to be invariant. Instead, it is dependent on whether zinc plays a predominantly network-modifying or charge-compensating role and, therefore, varies systematically with the glass composition. The Zn-O coordination number and bond distance were found to be 4.36(9) and 2.00(1) Å, respectively, for the network-modifying role vs 5.96(10) and 2.08(1) Å, respectively, for the charge-compensating role. The more open coordination environment of the charge-compensator is related to an enhanced probability of zinc finding bridging oxygen atoms as nearest-neighbors, reflecting a change in the connectivity of the glass network comprising four-coordinated silicon and aluminum atoms as the alumina content is increased.

5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode.

We have used operando 5D synchrotron total scattering computed tomography (TSCT) to understand the cycling and possible long term deactivation mechanisms of the lithium-ion battery anode bismuth vanadate. This anode material functions via a combined conversion/alloying mechanism in which nanocrystals of lithium-bismuth alloy are protected by an amorphous matrix of lithium vanadate. This composite is formed in situ during the first lithiation of the anode. The operando TSCT data were analyzed and mapped using both pair distribution function and Rietveld methods. We can follow the lithium-bismuth alloying reaction at all stages, gaining real structural insight including variations in nanoparticle sizes, lattice parameters and bond lengths, even when the material is completely amorphous. We also observe for the first time structural changes related to the cycling of lithium ions in the lithium vanadate matrix, which displays no interactions beyond the first shell of V-O bonds. The first 3D operando mapping of the distribution of different materials in an amorphous anode reveals a decline in coverage caused by either agglomeration or partial dissolution of the active material, hinting at the mechanism of long term deactivation. The observations from the operando experiment are backed up by post mortem transmission electron microscope (TEM) studies and theoretical calculations to provide a complete picture of an exceptionally complex cycling mechanism across a range of length scales.

The Application of HEXS and HERFD XANES for Accurate Structural Characterisation of Actinide Nanomaterials: The Case of ThO2.

The structural characterisation of actinide nanoparticles (NPs) is of primary importance and hard to achieve, especially for non-homogeneous samples with NPs less than 3 nm. By combining high-energy X-ray scattering (HEXS) and high-energy-resolution fluorescence-detected X-ray absorption near-edge structure (HERFD XANES) analysis, we have characterised for the first time both the short- and medium-range order of ThO2 NPs obtained by chemical precipitation. By using this methodology, a novel insight into the structures of NPs at different stages of their formation has been achieved. The pair distribution function revealed a high concentration of ThO2 small units similar to thorium hexamer clusters mixed with 1 nm ThO2 NPs in the initial steps of formation. Drying the precipitates at around 150 °C promoted the recrystallisation of the smallest units into more thermodynamically stable ThO2 NPs. HERFD XANES analysis at the thorium M4 edge, a direct probe for f states, showed variations that we have correlated with the breakdown of the local symmetry around the thorium atoms, which most likely concerns surface atoms. Together, HEXS and HERFD XANES are a powerful methodology for investigating actinide NPs and their formation mechanism.

The Application of HEXS and HERFD XANES for Accurate Structural Characterisation of Actinide Nanomaterials: The Case of ThO2.

Invited for the cover of this issue is Lucia Amidani and co-workers from the The European Synchrotron, Helmholtz Zentrum Dresden-Rossendorf, Lomonosov Moscow State University, Kurchatov Institute, and the Université Grenoble Alpes. The image depicts the atomic structure of the sample being viewed through "atomic googles", which represent the X-ray techniques used in this work. Read the full text of the article at 10.1002/chem.202003360.

ID15A at the ESRF - a beamline for high speed operando X-ray diffraction, diffraction tomography and total scattering.

ID15A is a newly refurbished beamline at the ESRF devoted to operando and time-resolved diffraction and imaging, total scattering and diffraction computed tomography. The beamline is optimized for rapid alternation between the different techniques during a single operando experiment in order to collect complementary data on working systems. The high available energy (up to 120 keV) means that even bulky and highly absorbing systems may be studied. The beamline is equipped with optimized focusing optics and a photon-counting CdTe pixel detector, allowing for both unprecedented data quality at high energy and for very rapid triggered experiments. A large choice of imaging detectors and ancillary probes and sample environments is also available.

In situ X-ray diffraction computed tomography studies examining the thermal and chemical stabilities of working Ba0.5Sr0.5Co0.8Fe0.2O3-δ membranes during oxidative coupling of methane.

In this study we present the results from two in situ X-ray diffraction computed tomography experiments of catalytic membrane reactors (CMRs) using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) hollow fibre membranes and Na-Mn-W/SiO2 catalyst during the oxidative coupling of methane (OCM) reaction. The negative impact of CO2, when added to the inlet gas stream, is seen to be mainly related to the C2+ yield, while no evidence of carbonate phase(s) formation is found during the OCM experiments. The main degradation mechanism of the CMR is suggested to be primarily associated with the solid-state evolution of the BSCF phase rather than the presence of CO2. Specifically, in situ XRD-CT and post-mortem SEM/EDX measurements revealed a collapse of the cubic BSCF phase and subsequent formation of secondary phases, which include needle-like structures and hexagonal Ba6Co4O12 and formation of a BaWO4 layer, the latter being a result of chemical interaction between the membrane and catalyst materials at high temperatures.

Realistic molecular model of kerogen's nanostructure.

Despite kerogen's importance as the organic backbone for hydrocarbon production from source rocks such as gas shale, the interplay between kerogen's chemistry, morphology and mechanics remains unexplored. As the environmental impact of shale gas rises, identifying functional relations between its geochemical, transport, elastic and fracture properties from realistic molecular models of kerogens becomes all the more important. Here, by using a hybrid experimental-simulation method, we propose a panel of realistic molecular models of mature and immature kerogens that provide a detailed picture of kerogen's nanostructure without considering the presence of clays and other minerals in shales. We probe the models' strengths and limitations, and show that they predict essential features amenable to experimental validation, including pore distribution, vibrational density of states and stiffness. We also show that kerogen's maturation, which manifests itself as an increase in the sp(2)/sp(3) hybridization ratio, entails a crossover from plastic-to-brittle rupture mechanisms.

Highly Symmetric AB2 Framework Related to Tridymite in the Disordered Nitridosilicate La24Sr14-7x[Si36N72](O1-xFx)14 (x = 0.489).

La24Sr14-7x[Si36N72](O1-xFx)14 with x = 0.489 was obtained as a microcrystalline product by metathesis at 1500 °C in a radio-frequency furnace starting from Si(NH)2, La(NH2)3, SrH2, LaF3, and CeF3. The structure of the new nitridosilicate oxide fluoride was determined by combining transmission electron microscopy (TEM) and single-crystal X-ray diffraction using a microfocused synchrotron beam. The structure model with pronounced disorder [P63/mmc, Z = 1, a = 16.2065(3), c = 9.4165(1) Å, R1(obs) = 0.0436] was confirmed by electron diffraction and aberration-corrected Z-contrast scanning TEM. The highly symmetric AB2 framework, which was theoretically predicted but not yet realized, consists of all-side vertex-sharing SiN4 tetrahedra that form channels along [001] filled with La, Sr, O, and F atoms. The connectivity pattern is related to that of tridymite. X-ray spectroscopy and bond-valence-sum calculations were further taken into account for assignment of the N, O, and F atoms.

Chemical Structures of Specific Sodium Ion Battery Components Determined by Operando Pair Distribution Function and X-ray Diffraction Computed Tomography.

To improve lithium and sodium ion battery technology, it is imperative to understand how the properties of the different components are controlled by their chemical structures. Operando structural studies give us some of the most useful information for understanding how batteries work, but it remains difficult to separate out the contributions of the various components of a battery stack (e.g., electrodes, current collectors, electrolyte, and binders) and examine specific materials. We have used operando X-ray diffraction computed tomography (XRD-CT) to study specific components of an essentially unmodified working cell and extract detailed, space-resolved structural information on both crystalline and amorphous phases that are present during cycling by Rietveld and pair distribution function (PDF) methods. We illustrate this method with the first detailed structural examination of the cycling of sodium in a phosphorus anode, revealing surprisingly different mechanisms for sodiation and desodiation in this promising, high-capacity anode system.

30-Lens interferometer for high-energy X-rays.

A novel high-energy multi-lens interferometer consisting of 30 arrays of planar compound refractive lenses is reported. Under coherent illumination each lens array creates a diffraction-limited secondary source. Overlapping such coherent beams produces an interference pattern demonstrating strong longitudinal functional dependence. The proposed multi-lens interferometer was tested experimentally at the 100 m-long ID11 ESRF beamline in the X-ray energy range from 30 to 65 keV. The interference pattern generated by the interferometer was recorded at fundamental and fractional Talbot distances. An effective source size (FWHM) of the order of 15 µm was determined from the first Talbot image, proving the concept that the multi-lens interferometer can be used as a high-resolution tool for beam diagnostics.

Discovery and Structure Determination of an Unusual Sulfide Telluride through an Effective Combination of TEM and Synchrotron Microdiffraction.

The structure elucidation of the novel sulfide telluride Pb8Sb8S15Te5 demonstrates a new versatile procedure that exploits the synergism of electron microscopy and synchrotron diffraction methods for accurate structure analyses of side-phases in heterogeneous microcrystalline samples. Suitable crystallites of unknown compounds can be identified by transmission electron microscopy and relocated and centered in a microfocused synchrotron beam by means of X-ray fluorescence scans. The refined structure model is then confirmed by simulating HRTEM images of the same crystallite. Pb8Sb8S15Te5 consists of chains of heterocubane-like units. Cation coordination polyhedra form unusually entwined chains of edge- and face-sharing bicapped trigonal prisms. The structure data are precise enough for bond-valence calculations, which confirm the disordered atom distribution. On this basis, optimization of physical properties becomes feasible.

Local Order in Liquid Gallium-Indium Alloys.

Liquid metals such as eutectic Ga-In alloys have low melting points and low toxicity and are used in catalysis and micro-robotics. This study investigates the local atomic structure of liquid gallium-indium alloys by a combination of density measurements, diffraction data, and Monte-Carlo simulation via the empirical potential structure refinement approach. A high-Q shoulder observed in liquid Ga is related to structural rearrangements in the second coordination shell. Structure analysis found coordination environments close to a random distribution for eutectic Ga-In alloy, while electronic effects appear to dominate the mixing enthalpy.

Crystallization during bending of a Pd-based metallic glass detected by x-ray microscopy.

Without the availability of slip systems and dislocation glide as in crystalline materials, metallic glasses resist irreversible deformation to elastic strains of 2% or more before undergoing heterogeneous plastic flow via the formation of shear bands. Observation of crystallite formation under compressive load was previously obtained by transmission electron microscopy. In this Letter, we present results of nondestructive x-ray diffraction microprofiling of the section of a bent glassy Pd40Cu30Ni10P20 ribbon in transmission using a synchrotron microbeam. Crystallization was clearly detected but only on the compression side of the neutral fiber. The experimental results and crystal nucleation frequency analysis are consistent with massive nucleation in shear bands forming under compressive stress but mainly for metallic glasses that show a large supercooled liquid temperature range ΔT=T(x)-T(g) between glass transition at T(g) and crystallization at T(x). The phenomenon is sensitively dependent on the volume change that accompanies crystallization in the supercooled liquid temperature range where the much larger liquid-state thermal expansion coefficient significantly increases the specific volume difference between the liquid and crystalline states. The results are also consistent with the many reports of extensive strain to fracture of metallic glasses under compressive load but not under tension.

Structural modulation and phase transitions in La2CoO(4.14) investigated by synchrotron X-ray and neutron single-crystal diffraction.

We report a combined synchrotron X-ray and neutron diffraction study on as-grown La(2)CoO(4.14) single-crystal from 10 to 470 K. Unprecedented structural features in terms of a (3 + 2)D incommensurate modulation have been detected and characterized in the Low Temperature Orthorhombic (LTO) phase already at room temperature despite the complex twinning that was unravelled. A new intermediate phase between the LTO and High Temperature Tetragonal (HTT) phases has been observed for the first time (in the range of 413-433 K). The transformation from LTO to this so-called HTLO (High Temperature Less Orthorhombic) phase is associated to a lowering of orthorhombicity and a loss of one modulation vector, yielding a (3 + 1)D incommensurate modulation. Conversely, above 433 K the HTT phase appears as nonmodulated but exhibits a strong dynamic disorder of CoO(6) octahedra, which has been characterized in detail by reconstruction of nuclear densities via the Maximum Entropy Method (MEM).

Benefits of a ketogenic diet on repetitive motor behavior in mice.

Repetitive motor behaviors are repetitive and invariant movements with no apparent function, and are common in several neurological and neurodevelopmental disorders, including autism spectrum disorders (ASD). However, the neuropathology associated with the expression of these abnormal stereotypic movements is not well understood, and effective treatments are lacking. The ketogenic diet (KD) has been used for almost a century to treat intractable epilepsy and, more recently, disorders associated with inflexibility of behavioral routines. Here, we show a novel application for KD to reduce an abnormal repetitive circling behavior in a rodent model. We then explore potential mediation through the striatum, as dysregulation of cortico-basal ganglia circuitry has previously been implicated in repetitive motor behavior. In Experiments 1 and 2, adult FVB mice were assessed for levels of repetitive circling across a 3-week baseline period. Mice were then switched to KD and repetitive circling was assessed for an additional 3 weeks. In Experiment 1, time on KD was associated with reduced repetitive behavior. In Experiment 2, we replicated these benefits of KD and assessed dendritic spine density in the striatum as one potential mechanism for reducing repetitive behavior, which yielded no differences. In Experiment 3, adult female circling mice were given a single administration of a dopamine D2 receptor antagonist (L-741,646) that was associated with reduced repetitive behavior over time. Future research will explore the relationship between KD and dopamine within basal ganglia nuclei that may be influencing the benefits of KD on repetitive behavior.

Synchrotron X-ray diffraction computed tomography to non-destructively study inorganic treatments for stone conservation.

The characterization of consolidating products formed by conservation treatments within Cultural Heritage (CH) materials is a burning issue and an analytical challenge, as non-destructive approaches, phase analysis, and volume distribution analysis are simultaneously required. This paper proposes the use of synchrotron X-ray diffraction computed tomography (XRDCT) to non-destructively study diammonium hydrogen phosphate (DAP) consolidating treatments for stone conservation. The mineralogical composition and localization of crystalline phases formed in a complex mixture have been explored and spatially resolved. The coexistence of hydroxyapatite and octacalcium phosphate has been finally demonstrated. The image analysis highlights the 3D distribution of calcium phosphates, their arrangement in a binding network down to the voxel scale, and their consolidating action. Above all, this study demonstrates the feasibility and high potential of XRDCT to investigate the interactions of conservation treatments with CH stone materials, and opens new analytical perspectives for XRDCT in conservation science and materials science.

X-ray transfocators: focusing devices based on compound refractive lenses.

This paper describes a tunable X-ray focusing apparatus, referred to as a transfocator, based on compound refractive lenses. By varying the number of lenses in the beam, the X-ray energy focused and the focal length can be varied continuously throughout a large range of energies and distances. The instrument can be used in both white and monochromatic beams to focus, pre-focus or collimate the beam. The transfocator can be used with other monochromators and/or other focusing elements, leading to significant increases in flux. Furthermore, the chromatic nature of the focusing means the transfocator suppresses harmonics and can also be used as an extremely high flux broad-band-pass monochromator. These devices have been installed in the first optics and second experimental hutches at the ID11 beamline at the ESRF.

Childhood trauma and post-trauma environment affect fear memory and alcohol use differently in male and female mice.

BACKGROUND: Childhood trauma is associated with the development of adult mental health and substance use disorders, with females generally being more at risk. Alcohol is commonly used for coping with trauma, and alcohol use disorder (AUD) affects ∼14.4 million adult Americans annually. Research investigating sex differences in the environmental modification of anxiety and alcohol use following childhood trauma will extend our understanding of the etiology of AUD. Here, we sought to model the interacting effects of a single-episode late childhood trauma with post-trauma environment on adult alcohol use using male and female mice. METHODS: C57Bl6/J mice (d22) exposed to predator odor (TMT) or water were reared in standard environments (SE) or environmental enrichment (EE). Mice were assessed for adolescent anxiety and conditioned fear, and for adult alcohol use in a limited access, response non-contingent, alcohol exposure paradigm. RESULTS: A single exposure to predator odor was an effective stressor, inducing long-term sex-dependent changes in conditioned fear and alcohol behaviors that interacted with post-trauma environment. Adolescent EE females showed more conditioned freezing to the trauma-associated context. Adult EE mice consumed less total alcohol than SE mice. However, alcohol use across time differed for males and females. Exposure to a childhood stressor increased alcohol use significantly in females, but not males. EE males, but not EE females, drank less than SE counterparts. CONCLUSIONS: Findings from this model recapitulate greater vulnerability to childhood trauma in females and support sex differences in post-trauma development of conditioned fear and alcohol use that are modified by environment.