Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap.

The progress of the technology is directly related to the growth of production and consumption of electrical/electronics equipment, especially of personal computers. This type of equipment has a relatively short average lifetime, 2-3 years. The amount of defective or obsolete equipment has been increasing substantially; consequently its disposition and/or recycling should be studied. In this work, printed circuit boards, which are used in personal computers, were studied in order to recover the metals in the circuit boards through mechanical processing, such as crushing, screening, as well as magnetic and electrostatic separation. The results obtained demonstrate the feasibility of using these processes to separate metal fractions from polymers and ceramics, and that it is possible to obtain a fraction concentrated in metals containing more than 50% on average of copper, 24% of tin and 8% of lead.

Evaluation of gold and silver leaching from printed circuit board of cellphones.

Electronic waste has been increasing proportionally with the technology. So, nowadays, it is necessary to consider the useful life, recycling, and final disposal of these equipment. Metals, such as Au, Ag, Cu, Sn and Ni can be found in the printed circuit boards (PCB). According to this, the aims of this work is to characterize the PCBs of mobile phones with aqua regia; obtaining "reference" values of leaching, to gold and silver, with cyanide and nitric acid, respectively; and study the process of leaching of these metals in alternative leaching with sodium thiosulfate and ammonium thiosulfate. The metals were characterized by digesting the sample with aqua regia for 1 and 2h at 60°C and 80°C. The leaching of Au with a commercial reagent (cyanide) and the Ag with HNO3were made. The leaching of Au and Ag with alternative reagents: Na2S2O3, and (NH4)2S2O3 in 0.1M concentration with the addition of CuSO4, NH4OH, and H2O2, was also studied. The results show that the digestion with aqua regia was efficient to characterize the metals present in the PCBs of mobile phones. However, the best method to solubilize silver was by digesting the sample with nitric acid. The leaching process using sodium thiosulfate was more efficient when an additional concentration of 0.015 and 0.030 M of the CuSO4 was added.

Bioacústica como método de avaliação do comportamento em pastejo de novilhas Girolando / Bioacoustics as a tool for evaluating grazing behavior of Girolando heifers

Objetivou-se validar o método de análise de dados bioacústicos na descrição do comportamento em pastejo de novilhas em área de integração lavoura-pecuária (iLP) e floresta (iLPF). Foram utilizadas oito novilhas Girolando (¾Holandês x »Gir) com média de 25±6,8 meses de idade e 268±83kg de peso vivo (PV), distribuídas em delineamento crossover 2x2 (dois sistemas x dois períodos de avaliação). A coleta de dados para análise bioacústica foi realizada utilizando-se gravadores MP3. Esses dados foram analisados pelo software Audacity® para identificação das atividades de pastejo, ruminação e ócio. Concomitantemente, o comportamento também foi avaliado pelo método de observação visual, realizado no período de 8 até 16 horas, em intervalos de 15 minutos. Não houve diferença (P>0,05) entre médias dos tempos (minutos) de pastejo, ruminação e ócio registrados pelos métodos de bioacústica e avaliação visual, sendo, respectivamente, 127 vs. 137; 122 vs. 113 e 238 vs. 216, no sistema iLP, e 134 vs. 103; 130 vs. 165 e 233 vs. 203, no sistema iLPF. Por meio desses resultados, foi possível concluir que o método da bioacústica é uma importante ferramenta para avaliar o comportamento de pastejo em diferentes sistemas de produção a pasto, com a vantagem de possibilitar o registro de atividades durante o período noturno, além de maior praticidade e precisão do que o método observacional.(AU)

Aiming to validate the analysis of bioacoustic data for describing grazing behavior of heifers in integrated crop, livestock (ICL) and forestry (ICLF) systems. Eight 25±6.8 month-old Girolando (¾Holstein × »Gir) heifers with 268±83kg of live weight (LW) were distributed in 2x2 crossover design (two systems x two evaluation periods). Data collection for bioacoustic analysis was done with MP3 recorders. These data were analyzed by Audacity® software for identification of the activities of grazing, rumination, and resting. Concomitantly, behavior was also analyzed by the method of visual observation from 8AM to 4PM in intervals of 15 minutes. There was no difference (P>0.05) between the methods of bioacustic and visual observation considering the means of time (minutes) of grazing, rumination, and resting, respectively: 127 vs. 137; 122 vs. 113; and 238 vs. 216 in ICL system and; 134 vs. 103; 130 vs. 165 and 233 vs. 203 in ICLF system. In conclusion, the bioacustic method is a tool that can be useful for evaluating bovine grazing behavior within different grazing systems, with the advantage of allowing report of activities during the night with higher practicality and precision than the visual observation method.(AU)

Bioacústica como método de avaliação do comportamento em pastejo de novilhas Girolando / Bioacoustics as a tool for evaluating grazing behavior of Girolando heifers

Objetivou-se validar o método de análise de dados bioacústicos na descrição do comportamento em pastejo de novilhas em área de integração lavoura-pecuária (iLP) e floresta (iLPF). Foram utilizadas oito novilhas Girolando (¾Holandês x ¼Gir) com média de 25±6,8 meses de idade e 268±83kg de peso vivo (PV), distribuídas em delineamento crossover 2x2 (dois sistemas x dois períodos de avaliação). A coleta de dados para análise bioacústica foi realizada utilizando-se gravadores MP3. Esses dados foram analisados pelo software Audacity® para identificação das atividades de pastejo, ruminação e ócio. Concomitantemente, o comportamento também foi avaliado pelo método de observação visual, realizado no período de 8 até 16 horas, em intervalos de 15 minutos. Não houve diferença (P>0,05) entre médias dos tempos (minutos) de pastejo, ruminação e ócio registrados pelos métodos de bioacústica e avaliação visual, sendo, respectivamente, 127 vs. 137; 122 vs. 113 e 238 vs. 216, no sistema iLP, e 134 vs. 103; 130 vs. 165 e 233 vs. 203, no sistema iLPF. Por meio desses resultados, foi possível concluir que o método da bioacústica é uma importante ferramenta para avaliar o comportamento de pastejo em diferentes sistemas de produção a pasto, com a vantagem de possibilitar o registro de atividades durante o período noturno, além de maior praticidade e precisão do que o método observacional.(AU)

Aiming to validate the analysis of bioacoustic data for describing grazing behavior of heifers in integrated crop, livestock (ICL) and forestry (ICLF) systems. Eight 25±6.8 month-old Girolando (¾Holstein × ¼Gir) heifers with 268±83kg of live weight (LW) were distributed in 2x2 crossover design (two systems x two evaluation periods). Data collection for bioacoustic analysis was done with MP3 recorders. These data were analyzed by Audacity® software for identification of the activities of grazing, rumination, and resting. Concomitantly, behavior was also analyzed by the method of visual observation from 8AM to 4PM in intervals of 15 minutes. There was no difference (P>0.05) between the methods of bioacustic and visual observation considering the means of time (minutes) of grazing, rumination, and resting, respectively: 127 vs. 137; 122 vs. 113; and 238 vs. 216 in ICL system and; 134 vs. 103; 130 vs. 165 and 233 vs. 203 in ICLF system. In conclusion, the bioacustic method is a tool that can be useful for evaluating bovine grazing behavior within different grazing systems, with the advantage of allowing report of activities during the night with higher practicality and precision than the visual observation method.(AU)