Colloidal ruthenium catalysts for selective quinaldine hydrogenation: Ligand and solvent effects.

Colloidal Ru nanoparticles (NP) display interesting catalytic properties for the hydrogenation of (hetero)arenes as they proceed efficiently in mild reaction conditions. In this work, a series of Ru based materials was used in order to selectively hydrogenate quinaldine and assess the impact of the stabilizing agent on their catalytic performances. Ru nanoparticles stabilized with polyvinylpyrrolidone (PVP) and 1-adamantanecarboxylic acid (AdCOOH) allowed to obtain 5,6,7,8-tetrahydroquinaldine with a remarkable selectivity in mild reaction conditions by choosing the suitable solvent. The presence of a carboxylate ligand on the surface of the Ru NP led to an increase in the activity when compared to Ru/PVP catalyst. The stabilizing agent had also an impact on the selectivity, as carboxylate ligand modified catalysts promoted the selectivity towards 1,2,3,4-tetrahydroquinaldine, with bulky carboxylate displaying the highest ones.

Size Control and Improved Aqueous Colloidal Stability of Surface-Functionalized ZnGa2O4:Cr3+ Bright Persistent Luminescent Nanoparticles.

Near-infrared (NIR)-emitting ZnGa2O4:Cr3+ (ZGO) persistent luminescent nanoparticles (PLNPs) have recently attracted considerable attention for diverse optical applications. The widespread use and promising potential of ZGO material in different applications arise from its prolonged post-excitation emission (several minutes to hours) that eliminates the need for continuous in situ excitation and the possibility of its excitation in different spectral regions (X-rays and UV-vis). However, the lack of precise control over particle size/distribution and its poor water dispersibility and/or limited colloidal stability required for certain biological applications are the major bottlenecks that limit its practical applications. To address these fundamental limitations, herein, we have prepared oleic acid (OA)-stabilized ZGO PLNPs with controlled size (7-12 nm, depending on the type of alcohol used in synthesis) and monodispersity. A further increase in size (8-21 nm), with a concomitant increase in persistent luminescence, could be achieved using a seed-mediated approach, employing the as-prepared ZGO PLNPs from the first synthesis as the seed and growing layers of the same material by adding fresh precursors. To remove their surface oleate groups and make the nanoparticles hydrophilic, two surface modification strategies were evaluated: modification with only poly(acrylic acid) (PAA) as the hydrophilic capping agent and modification with either PAA or cysteamine (Cys) as the hydrophilic capping agent in conjunction with BF4- as the intermediate surface modifier. The latter surface modifications involving BF4- conferred long-term (60 days and longer) colloidal stability to the nanoparticles in aqueous media, which is related to their favorable ζ potential values. The proposed generalized strategy could be used to prepare different kinds of surface-functionalized PLNPs with control of size, hydrophilicity, and colloidal stability and enhanced/prolonged persistent luminescence for diverse potential applications.

Effect of gadolinium incorporation on the structure and luminescence properties of niobium-based materials.

In this work, we have investigated how the concentration of Gd3+ ions affects the structural and luminescent properties of niobium oxide-based matrices doped with Eu3+ ions obtained by the adapted non-hydrolytic sol-gel route. X-ray diffractograms revealed that increasing the concentration of Gd3+ ions favored the onset of the Gd2O3 structure decreasing the GdNbO4 phase. The excitation spectra (λ em = 613 nm) presented bands corresponding to the 7F0 â†’ 5LJ transitions (L = D, G, and L, where J = 0-7), attributed to the Eu3+ ions, and a broad band at 270 nm, assigned to the charge transfer of the [Formula: see text] group. The emission spectra contained bands refer to the 5D0 â†’ 7FJ internal configuration transitions (J = 0, 1, 2, 3, and 4). Finally, the CIE chromaticity coordinates met the standard for the color red established by the National Television Standard Committee (NTSC).

Time-gated luminescence bioimaging with new luminescent nanocolloids based on [Mo6I8(C2F5COO)6]2- metal atom clusters.

Bioimaging and cell labeling using red or near infrared phosphors emitting in the "therapeutic window" of biological tissues have recently become some of the most active research fields in modern medical diagnostics. However, because organic and inorganic autofluorophores are omnipresent in nature, very often the background signal from fluorochromes other than targeted probes has to be eliminated. This discrimination could be available using a time-gated luminescence microscopy (TGLM) technique associated with long lifetime phosphorescent nanocomposites. Here, we report new SiO2 nanostructured particle (50 nm in diameter) embedded luminescent nanosized [Mo6I8(C2F5COO)6]2- metal atom clusters (1 nm in diameter), successfully prepared by the microemulsion technique. This combination provides new physical insight and displays red emission in biological based solution under UV-Vis excitation with long lifetimes of around 17 and 84 µs. Moreover, the nanoparticles can be internalized by cancer cells after surface functionalization by transferrin protein and clearly imaged by TGLM under excitation at 365 nm. The nanocomposites have been mainly characterized by scanning and transmission electron microscopies (SEM and HAADF-STEM), UV-Vis and photoluminescence (PL) spectroscopies.

Luminescence properties of Eu-complex formations into ordered mesoporous silica particles obtained by the spray pyrolysis process.

Ordered mesoporous, highly luminescent SiO2 particles have been synthesized by spray pyrolysis from solutions containing tetraethylorthosilicate (TEOS), Eu(NO3)3.6H2O, and cetyltrimethylammonium bromide (CTAB) as structure-directing agents. The 1,10-phenantroline (Phen) molecules were coordinated in a post-synthesis step by a simple wet impregnation method. In addition, other matrices were also prepared by the encapsulation of europium complex Eu(fod)3 (where fod = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato) into mesoporous silica, and then the Phen molecules were encapsulated by different impregnation steps, after which the luminescence properties were investigated. The obtained materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder x-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Powders with polydisperse spherical grains were obtained, displaying an ordered hexagonal array of mesochannels. Luminescence results revealed that Phen molecules had been successfully coordinated as an additional ligand in the Eu(fod)3 complex into the channels of the mesoporous particles without disrupting the structure.

Demonstrating the In Vitro and In Situ Antimicrobial Activity of Oxide Mineral Microspheres: An Innovative Technology to Be Incorporated into Porous and Nonporous Materials.

The antimicrobial activity of surfaces treated with zinc and/or magnesium mineral oxide microspheres is a patented technology that has been demonstrated in vitro against bacteria and viruses. This study aims to evaluate the efficiency and sustainability of the technology in vitro, under simulation-of-use conditions, and in situ. The tests were undertaken in vitro according to the ISO 22196:2011, ISO 20473:2013, and NF S90-700:2019 standards with adapted parameters. Simulation-of-use tests evaluated the robustness of the activity under worst-case scenarios. The in situ tests were conducted on high-touch surfaces. The in vitro results show efficient antimicrobial activity against referenced strains with a log reduction of >2. The sustainability of this effect was time-dependent and detected at lower temperatures (20 ± 2.5 °C) and humidity (46%) conditions for variable inoculum concentrations and contact times. The simulation of use proved the microsphere's efficiency under harsh mechanical and chemical tests. The in situ studies showed a higher than 90% reduction in CFU/25 cm2 per treated surface versus the untreated surfaces, reaching a targeted value of <50 CFU/cm2. Mineral oxide microspheres can be incorporated into unlimited surface types, including medical devices, to efficiently and sustainably prevent microbial contamination.

Inhalation of acidic nanoparticles prevents doxorubicin cardiotoxicity through improvement of lysosomal function.

Doxorubicin (Dox) is an effective anticancer molecule, but its clinical efficacy is limited by strong cardiotoxic side effects. Lysosomal dysfunction has recently been proposed as a new mechanism of Dox-induced cardiomyopathy. However, to date, there is a paucity of therapeutic approaches capable of restoring lysosomal acidification and function in the heart. Methods: We designed novel poly(lactic-co-glycolic acid) (PLGA)-grafted silica nanoparticles (NPs) and investigated their therapeutic potential in the primary prevention of Dox cardiotoxicity in cardiomyocytes and mice. Results: We showed that NPs-PLGA internalized rapidly in cardiomyocytes and accumulated inside the lysosomes. Mechanistically, NPs-PLGA restored lysosomal acidification in the presence of doxorubicin or bafilomycin A1, thereby improving lysosomal function and autophagic flux. Importantly, NPs-PLGA mitigated Dox-related mitochondrial dysfunction and oxidative stress, two main mechanisms of cardiotoxicity. In vivo, inhalation of NPs-PLGA led to effective and rapid targeting of the myocardium, which prevented Dox-induced adverse remodeling and cardiac dysfunction in mice. Conclusion: Our findings demonstrate a pivotal role for lysosomal dysfunction in Dox-induced cardiomyopathy and highlight for the first time that pulmonary-driven NPs-PLGA administration is a promising strategy against anthracycline cardiotoxicity.

APTES-modified RE2O3:Eu3+ luminescent beads: structure and properties.

Europium-doped lanthanide oxide RE(2)O(3):Eu(3+) (RE = Y or Gd) luminescent beads, with a spherical shape and a diameter of 150 ± 15 nm, have been modified by reaction with 3-aminopropyltriethoxysilane (APTES), in order to introduce reactive amine groups at their surfaces. The direct silanation has resulted in the formation of a nanometric layer at the surface of the beads, with an optimum grafting rate of 0.055 ± 0.005 mol APTES/mol RE(2)O(3). Fourier transform infrared (FTIR) and X-ray photoelectron (XPS) spectroscopies confirmed the condensation of an organosilane layer, made of cross-linked -O-Si-O-Si- and of groups -O-Si-R (with R = (CH(2))(3)NH(2) or O-Et). Titration of the accessible amine groups has been performed by simultaneously measuring the luminescence of grafted fluorescein isothiocyanate and that of core particles: there are about 2.3 × 10(4) (2.8 × 10(4)) -NH(2) per Y(2)O(3):Eu(3+) (Gd(2)O(3):Eu(3+)) bead. The isoelectronic point was shifted by one pH unit after APTES modification. The surface modification by APTES at least preserved (for Gd(2)O(3):Eu(3+)) or improved (for Y(2)O(3):Eu(3+)) the red emission of the beads.

Heterogeneous Oxysulfide@Fluoride Core/Shell Nanocrystals for Upconversion-Based Nanothermometry.

Lanthanide (Ln3+)-doped upconversion nanoparticles (UCNPs) often suffer from weak luminescence, especially when their sizes are ultrasmall (less than 10 nm). Enhancing the upconversion luminescence (UCL) efficiency of ultrasmall UCNPs has remained a challenge that must be undertaken if any practical applications are to be envisaged. Herein, we present a Ln3+-doped oxysulfide@fluoride core/shell heterostructure which shows efficient UCL properties under 980 nm excitation and good stability in solution. Through epitaxial heterogeneous growth, a ∼4 nm optically inert ß-NaYF4 shell was coated onto ∼5 nm ultrasmall Gd2O2S:20%Yb,1%Tm. These Gd2O2S:20%Yb,1%Tm@NaYF4 core/shell UCNPs exhibit a more than 800-fold increase in UCL intensity compared to the unprotected core, a 180-fold increase in luminescence decay time of the 3H4 → 3H6 Tm3+ transition from 5 to 900 µs, and an upconversion quantum yield (UCQY) of 0.76% at an excitation power density of 155 W/cm2. Likewise, Gd2O2S:20%Yb,2%Er@NaYF4 core/shell UCNPs show a nearly 5000-fold increase of their UCL intensity compared to the Gd2O2S:20%Yb,2%Er core and a maximum UCQY of 0.61%. In the Yb/Er core-shell UCNP system, the observed variation of luminescence intensity ratio seems to originate from a change in lattice strain as the temperature is elevated. For nanothermometry applications, the thermal sensitivities based on thermally coupled levels are estimated for both Yb/Tm and Yb/Er doped Gd2O2S@NaYF4 core/shell UCNPs.

Removal of atrazine from aqueous solutions onto a magnetite/chitosan/activated carbon composite in a fixed-bed column system: optimization using response surface methodology.

In this study, a magnetite/chitosan/activated carbon (MCHAC) composite is proposed as an efficient adsorbent for the removal of atrazine from aqueous solutions. The prepared composite was characterized using Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) methods. Response surface methodology (RSM) coupled with composite central design (CCD) were used to optimize the effects of the four independent variables, pH, initial concentration of atrazine (C 0), bed depth (H), and flow rate (Q), which influence the adsorption process. The experimental results modeled using response surface methodology (RSM) coupled with central composite design (CCD) (RSM-CCD) indicated a quadratic relationship with p < 0.0001 for adsorption capacity at saturation (q s) and fraction of bed utilization (FBU). The results of the experiments performed under the optimized conditions, pH = 5.07, C 0 = 137.86 mg L-1, H = 2.99 cm and Q = 1.038 mL min-1, showed a q s value of 62.32 mg g-1 and FBU of 72.26%, with a deviation value of less than 0.05 from the predicted q s and FBU values. The obtained breakthrough curves were fitted with four mathematical models, Thomas, Bohart-Adams, Yan and Yoon-Nelson, in order to determine the limiting step of the mass transfer of the atrazine adsorption onto the composite. A desorption study of the composite revealed the high reuse potential for MCHAC, thus, the prepared material could be used as a low-cost and efficient adsorbent for the decontamination of polluted wastewater.

Multimodal gadolinium oxysulfide nanoparticles for bioimaging: A comprehensive biodistribution, elimination and toxicological study.

For some years now, gadolinium oxysulfide nanoparticles (NPs) appear as strong candidates for very efficient multimodal in vivo imaging by: 1) Magnetic Resonance (MRI), 2) X-ray Computed Tomography (CT) and 3) photoluminescence imaging. In this paper, we present a selection of results centered on the evaluation of physico-chemical stability, toxicity, bio-distribution and excretion mechanisms of Gd2O2S:Ln3+ nanoparticles intravenously injected in rats. Two formulations are here tested with a common matrix and different dopants: Gd2O2S:Eu3+5% and Gd2O2S:Yb3+4%/Tm3+0.1%. The NPs appear to be almost insoluble in pure water and human plasma but corrosion/degradation phenomenon appears in acidic conditions classically encountered in cell lysosomes. Whole body in vivo distribution, excretion and toxicity evaluation revealed a high tolerance of nanoparticles with a long-lasting imaging signal associated with a slow hepatobiliary clearance and very weak urinary excretion. The results show that the majority of the injected product (>60%) has been excreted through the feces after five months. Experiments have evidenced that the NPs mainly accumulate in macrophage-rich organs, that is mainly liver and spleen and to a lesser extent lungs and bones (mainly marrow). No significant amounts have been detected in other organs such as heart, kidneys, brain, intestine and skin. Gd2O2S:Ln3+ NPs appeared to be very well tolerated up to 400 mg/kg when administered intravenously. STATEMENT OF SIGNIFICANCE: Since 2011, we have focused our work on Gd2O2S nanoparticles (NPs) for multimodal bioimaging using fluorescence, Magnetic Resonance Imaging (MRI) and Computed Tomography with very efficient results already published. However, since the European Medicines Agency has concluded its review of gadolinium contrast agents, confirming recommendations to restrict the use of some linear gadolinium agents used in MRI, a particular attention must be paid to any new contrast media containing gadolinium. Therefore, we present in this paper a compilation of studies about toxicity, bio-distribution and excretion mechanisms of Gd2O2S:Ln3+ NPs intravenously injected into rats. We also present an in vitro kinetic study of NPs degradation in aqueous and biological media to provide some information on chemical and biological stability.

Effect of ytterbium amount on LaNbO4:Tm3+,Yb3+ nanoparticles for bio-labelling applications.

PURPOSE: This work investigates how Yb3+ concentration affects the luminescent properties of LaNbO4 nanoparticles for medical imaging applications. Due to the highly transparent optical window for organic tissues in the near infrared region (650-1000 nm), upconversion fluorescence allows near infrared wavelengths to penetrate deeply into tissues, which is useful in biomedical areas such as biodetection, activated phototherapy, and screening. MATERIALS/METHOD: Upconversion nanoparticles based on LaNbO4 doped with Tm3+ and Yb3+ were prepared by the one-step industrial process called Spray Pyrolysis. Samples with different Tm3+:Yb3+ molar ratios (1:4, 1:8 and 1:16) were obtained. RESULTS: The X-ray powder diffractograms of all the samples displayed the typical peaks of a crystalline material (tetragonal phase). Emission bands emerged in the blue, red, and near infrared regions, and they corresponded to the Tm3+1G4 → 3H6 (475 nm), 1G4 → 3F4 (650 nm), 3F2,3 â†’ 3H6 (690 nm), and 3H4 → 3H6 (803 nm) transitions, which indicated a two-photon absorption process. As for bio-labelling application, the results indicated that Yb3+ concentration was directly related to signal intensity. CONCLUSIONS: The intensity of positive conversion emissions depends directly on Yb3+ concentration. The bio-labelling tests pointed to the potential application of these materials. The sample containing the highest amount of Yb3+ provided better results and was easier to detect than the standard sample.

Increasing Uptake of Silica Nanoparticles with Electroporation: From Cellular Characterization to Potential Applications.

In the fields of biology and medicine, nanoproducts such as nanoparticles (NPs) are specifically interesting as theranostic tools, since they offer the double capacity to locally deliver active drugs and to image exactly where the product is delivered. Among the many described possibilities, silica nanoparticles (SiNPs) represent a good choice because of their ease of synthesis, the possibility of their vast functionalization, and their good biocompatibility. However, SiNPs' passive cell internalization by endocytosis only distributes NPs into the cell cytoplasm and is unable to target the nucleus if SiNPs are larger than a few nanometers. In this study, we demonstrate that the cell penetration of SiNPs of 28⁻30 nm in diameter can be strongly enhanced using a physical method, called electroporation or electropermeabilization (EP). The uptake of fluorescently labelled silica nanoparticles was improved in two different cancer cell lines, namely, HCT-116 (human colon cancer) cells and RL (B-lymphoma) cells. First, we studied cells' capability for the regular passive uptake of SiNPs in vitro. Then, we set EP parameters in order to induce a more efficient and rapid cell loading, also comprising the nuclear compartment, while preserving the cell viability. In the final approach, we performed in vivo experiments, and evidenced that the labeling was long-lasting, as confirmed by fluorescence imaging of labeled tumors, which enabled a 30-day follow-up. This kind of SiNPs delivery, achieved by EP, could be employed to load extensive amounts of active ingredients into the cell nucleus, and concomitantly allow the monitoring of the long-term fate of nanoparticles.

Evaluation of upconverting nanoparticles towards heart theranostics.

Restricted and controlled drug delivery to the heart remains a challenge giving frequent off-target effects as well as limited retention of drugs in the heart. There is a need to develop and optimize tools to allow for improved design of drug candidates for treatment of heart diseases. Over the last decade, novel drug platforms and nanomaterials were designed to confine bioactive materials to the heart. Yet, the research remains in its infancy, not only in the development of tools but also in the understanding of effects of these materials on cardiac function and tissue integrity. Upconverting nanoparticles are nanomaterials that recently accelerated interest in theranostic nanomedicine technologies. Their unique photophysical properties allow for sensitive in vivo imaging that can be combined with spatio-temporal control for targeted release of encapsulated drugs. Here we synthesized upconverting NaYF4:Yb,Tm nanoparticles and show for the first time their innocuity in the heart, when injected in the myocardium or in the pericardial space in mice. Nanoparticle retention and upconversion in the cardiac region did not alter heart rate variability, nor cardiac function as determined over a 15-day time course ensuing the sole injection. Altogether, our nanoparticles show innocuity primarily in the pericardial region and can be safely used for controlled spatiotemporal drug delivery. Our results support the use of upconverting nanoparticles as potential theranostics tools overcoming some of the key limitations associated with conventional experimental cardiology.

Multimodal gadolinium oxysulfide nanoparticles: a versatile contrast agent for mesenchymal stem cell labeling.

Despite a clear development of innovative therapies based on stem cell manipulation, the availability of new tools to better understand and follow stem cell behavior and improve their biomedical applications is not adequate. Indeed, an ideal tracking device must have good ability to label stem cells as well as complete neutrality relative to their biology. Furthermore, preclinical studies imply in vitro and in vivo approaches that often require several kinds of labeling and/or detection procedures. Consequently, the multimodality concept presented in this work may present a solution to this problem as it has the potential to combine complementary imaging techniques. Spherical europium-doped gadolinium oxysulfide (Gd2O2S:Eu3+) nanoparticles are presented as a candidate as they are detectable by (1) magnetic resonance (MRI), (2) X-ray and (3) photoluminescence imaging. Whole body in vivo distribution, elimination and toxicity evaluation revealed a high tolerance of nanoparticles with a long-lasting MRI signal and slow hepatobiliary and renal clearance. In vitro labeling of a wide variety of cells unveils the nanoparticle potential for efficient and universal cell tracking. Emphasis on mesenchymal stromal cells (MSCs) leads to the definition of optimal conditions for labeling and tracking in the context of cell therapy: concentrations below 50 µg mL-1 and diameters between 170 and 300 nm. Viability, proliferation, migration and differentiation towards mesodermal lineages are preserved under these conditions, and cell labeling appears to be persistent and without any leakage. Ex vivo detection of as few as five thousand Gd2O2S:Eu3+-labeled MSCs by MRI combined with in vitro examination with fluorescence microscopy highlights the feasibility of cell tracking in cell therapy using this new nanoplatform.

Simple and economic elaboration of high purity CaCO3 particles for bone graft applications using a spray pyrolysis technique.

Materials for bone grafting are a major health stake today. The existing synthetic materials only partially answer to the requirements for such uses and do not provide a real alternative solution to the classical way consisting of the reuse of natural osseous materials, known to create other problems. In the present work, we have prepared calcium carbonate powders using spray pyrolysis in the perspective to realize ideal and multi-purposed bricks to form bone graft materials, by bottom-up approaches, using classical techniques. The chemical reactions involved in the synthesis process consist in the thermal decomposition of calcium acetate. This precursor, a classical food additive, is known to be non toxic, easy to use and very cheap. Morphological and chemical characterization was conducted on the obtained materials. Depending on the pyrolysis temperature, we observed partial decomposition of calcium acetate or lime formation. An annealing step is consequently required to finalize the transformation. Finally, it appears that annealed products are pure calcite particles, having a spherical morphology and possessing a low dispersity in the micron size range. These particles exhibit an original internal structure, reinforcing and ensuring the preservation of their morphological characteristics during the sintering process. Furthermore, a porosity value compatible with drug carrier capabilities was measured on the obtained products. All these qualities allow us to consider a multi-purpose use of these particles in almost all types of bone graft materials.

Silica-Based Nanoparticles as Bifunctional and Bimodal Imaging Contrast Agents.

New bifunctional and bimodal nanoparticles (NPs) have been elaborated and characterised. They are based on silica NPs that incorporate a silylated ruthenium tris-bipyridine complex. The resulting suspension of amine-modified NPs with diameters of 20 nm was post-functionalised with a stable gadolinium ion complex. Interest in these NPs lies mainly in the confinement of optical and magnetic imaging agents (Ru and Gd complexes, respectively) within the NP volume. Their potential use as a bimodal probe (luminescence/magnetic resonance imaging) and theranostic agent (photodynamic therapy/imaging) is described. The biological potential of these NPs has been studied on HCT-116 cells and microscopy and cytotoxicity results are given.

A Photosensitizer Lanthanide Nanoparticle Formulation that Induces Singlet Oxygen with Direct Light Excitation, But Not By Photon or X-ray Energy Transfer.

We report the design and synthesis of europium-doped gadolinium oxysulfide nanoscintillators Gd2 O2 S:Eu3+ conjugated with two different photosensitizers (PSs): a zinc chlorin (ZnTPC) and a zinc phtalocyanine (ZnPc) by covalent bonding through a layer of N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA). These conjugates were designed to be activated under X-ray excitation to allow a photodynamic effect, although this desired outcome was not achieved in this study. The monodispersed nanoparticles of ∼70 nm diameter were pegylated to be stabilized in aqueous suspension. It was shown that the PSs conserved their photophysical properties once conjugated to the nanoscintillator and efficient singlet oxygen was obtained upon photo-irradiation. However, no energy transfer was observed from the nanoscintillator to the photosensitizer neither under photo- nor X-ray irradiation.

[Fe(II)(TRIM)(2)]F(2), the First Example of Spin Conversion Monitored by Molecular Vibrations.

The new [Fe(II)(TRIM)(2)]F(2) spin-crossover complex (TRIM = 4-(4-imidazolylmethyl)-2-(2-imidazolylmethyl)imidazole) has been synthesized, crystallizing in the monoclinic system, space group P2/n, with Z = 2, a = 9.798(2) Å, b = 8.433(2) Å, c = 14.597(3) Å, and beta = 90.46(1) degrees. The structure was solved by direct methods and refined to conventional agreement indices R = 0.032 and R(w) = 0.034 with 1378 unique reflections for which I > 3sigma(I). The molecular structure consists of [Fe(TRIM)(2)](2+) complex cations hydrogen-bonded to six fluoride anions. The crystal packing results from this highly symmetrical and dense 3D network of hydrogen bonds. The coordination geometry of the iron(II) center can be described as a weakly distorted octahedron, including six nitrogen atoms originating from the two TRIM ligands coordinated to Fe(II) through their imine nitrogen atoms. Investigation of [Fe(II)(TRIM)(2)]F(2) by magnetic susceptibility measurements and Mössbauer spectroscopy as a function of temperature indicates a 5% thermal variation of the spin fraction between 50 and 150 K, at variance with all previous litterature data. The spin conversion is gradual with 6% LS fraction below 50 K and less than 1% above 150 K. A theoretical approach based on the Ising-like model, completed with harmonic oscillators associated with the 15 vibration modes of the FeN(6) coordination octahedron, successfully fits the data with an energy gap of approximately 40 K between the lowest LS and HS electrovibrational states, an average vibration frequency omega(LS) of 232 K in the LS state, and an average omega(LS)/omega(HS) ratio of 1.3. Taking these results into account, the computed molar entropy change DeltaS associated with a complete conversion between the HS and LS states of Fe(II)(TRIM)(2)F(2) ( approximately 40 J.K(-)(1).mol(-)(1)) is in fair agreement with the expected value.

Tetranuclear Tetrapyrido[3,2-a:2',3'-c:3",2"-h:2"',3"'-j]phenazineruthenium Complex: Synthesis, Wide-Angle X-ray Scattering, and Photophysical Studies.

The tetranuclear ruthenium complex {Ru[(tpphz)Ru(bpy)(2)](3)}(8+), where tpphz is tetrapyrido[3,2-a:2',3'-c:3",2"-h:2"',3"'-j]phenazine, has been synthesized by reaction of [Ru(tpphz)(3)](2+) with [Ru(bpy)(2)Cl(2)] and by reaction of [Ru(bpy)(2)(tpphz)](2+) with [Ru(DMSO)(4)Cl(2)]. The large distance between the chiral centers allows full (1)H NMR interpretation despite the mixture of eight stereoisomers. The tetranuclear complex was further characterized by electrospray mass spectrometry and by the wide-angle X-ray scattering technique, which confirmed the starburst geometry. The photophysical properties of the tetranuclear complex in acetonitrile were studied and compared with those of [Ru(tpphz)(3)](2+) (1 x 10(-)(4) M acidic solution) and [(bpy)(2)Ru(tpphz)Ru(bpy)(2)](4+) model molecules. The tetranuclear complex gives rise to a single emission, attributed to metal-to-ligand charge-transfer states involving peripheral Ru centers and tpphz bridging ligands.