RESUMO
Occurrence of chiral recognition in bimolecular photoinduced electron transfer (ET) is difficult to identify because of the predominant role of diffusion. To circumvent this problem, we apply a combination of ultrafast time-resolved fluorescence and transient electronic absorption to look for stereoselectivity in the initial, static stage of ET quenching, where diffusion is not relevant. The fluorophore and electron acceptor is a cationic hexahelicene, whereas the quencher has either stereocentered (tryptophan) or axial (binaphthol) chirality. We found that, in all cases, the quenching dynamics are the same, within the limit of error, for different diastereomeric pairs in polar and medium-polar solvents. The same absence of chiral effect is observed for the recombination of the radical pair, which results from the quenching. Molecular dynamics simulations suggest that the distribution of inter-reactant distance is independent of the chirality of the acceptor and the donor. Close contact resulting in large electronic coupling is predicted to be possible with all diastereomeric pairs. In this case, ET is an adiabatic process, whose dynamics do no longer depend on the coupling, but are rather controlled by high-frequency intramolecular modes.
RESUMO
A significant number of quadrupolar dyes behave as their dipolar analogues when photoexcited in polar environments. This is due to the occurrence of excited-state symmetry breaking (ES-SB), upon which the electronic excitation, initially distributed over the whole molecule, localises preferentially on one side. Here, we investigate the ES-SB properties of two A-D-A dyes, consisting of a pyrrolo-pyrrole donor (D) and either cyanophenyl or dicyanovinyl acceptors (A). For this, we use time-resolved vibrational spectroscopy, comparing IR absorption and femtosecond stimulated Raman spectroscopies. Although dicyanovinyl is a stronger electron-withdrawing group, ES-SB is not observed with the dicyanovinyl-based dye even in highly polar media, whereas it already takes place in weakly polar solvents with dyes containing cyanophenyl accepting groups. This difference is attributed to the large electronic coupling between the D-A branches in the former dye, whose loss upon symmetry breaking cannot be counterbalanced by a gain in solvation energy. Comparison with analogues of the cyanophenyl-based dye containing different spacers reveals that interbranch coupling does not so much depend on the distance between the D-A subunits than on the nature of the spacer. We show that transient Raman spectra probe different modes of these centrosymmetric molecules but are consistent with the transient IR data. However, lifetime broadening of the Raman bands, probably due to the resonance enhancement, may limit the application of this technique for monitoring ES-SB.
RESUMO
The predictive ability of density functional theory is fundamental to its usefulness in chemical applications. Recent work has compared solution-phase enthalpies of activation for metal-ligand bond dissociation to enthalpies of reaction for bond dissociation, and the present work continues those comparisons for 43 density functional methods. The results for ligand dissociation enthalpies of 30 metal-ligand complexes tested in this work reveal significant inadequacies of some functionals as well as challenges from the dispersion corrections to some functionals. The analysis presented here demonstrates the excellent performance of a recent density functional, M11plus, which contains nonlocal rung-3.5 correlation. We also find a good agreement between theory and experiment for some functionals without empirical dispersion corrections such as M06, r2SCAN, M06-L, and revM11, as well as good performance for some functionals with added dispersion corrections such as ωB97X-D (which always has a correction) and BLYP, B3LYP, CAM-B3LYP, and PBE0 when the optional dispersion corrections are added.
RESUMO
Screened-exchange hybrid density functionals are especially recommended for solid-state systems because they combine the advantages of hybrid functionals with the correct physics and lower computational cost associated with the attenuation of Hartree-Fock exchange at long range. We present a screened-exchange hybrid functional, M06-SX, that combines the functional form of the local revM06-L functional with a percentage of short-range nonlocal Hartree-Fock exchange. The M06-SX functional gives good results not only for a large set of training data but also for several databases quite different from the training data. The mean unsigned error (MUE) of the M06-SX functional is 2.85 kcal/mol for 418 atomic and molecular energies (AME418) in Minnesota Database 2019, which is better than all five other screened-exchange hybrid functionals tested in this work. The M06-SX functional also gives especially good results for semiconductor band gaps, molecular dissociation energies, noncovalent interactions, barrier heights, and electronic excitation energies excluding long-range charge transfer excitations. For the LC18 lattice constants database, the M06-SX functional gives an MUE of only 0.034 Å. Therefore, the M06-SX functional is well suited for studying molecular chemistry as well as solid-state physics.
RESUMO
An atypical teratoid rhabdoid tumour (AT/RT) is an extremely rare malignant neoplasm. Cerebrospinal fluid (CSF) involvement at presentation indicates intracranial dissemination and is associated with an aggressive course and worse outcomes. We present the characteristic cytomorphological features of AT/RT in the cerebrospinal fluid from a toddler presenting with a posterior fossa space-occupying lesion.
Assuntos
Neoplasias do Sistema Nervoso Central , Tumor Rabdoide , Teratoma , Neoplasias do Sistema Nervoso Central/patologia , Pré-Escolar , Citodiagnóstico , Humanos , Doenças Raras , Tumor Rabdoide/líquido cefalorraquidiano , Tumor Rabdoide/diagnóstico , Tumor Rabdoide/patologia , Teratoma/líquido cefalorraquidiano , Teratoma/diagnóstico , Teratoma/patologiaRESUMO
In the leather industry, Cr (III) is used as a basic tanning agent. The wastewater discharged from the tannery industry contains a high concentration of chromium. Recent studies indicate the genotoxic effects especially DNA damage and oxidative stress of Cr (III) in tannery workers. Cr (III) interacts with DNA to form DNA cross-links and DNA strand breaks. It also modifies the oxidative DNA base through the Haber-Weiss reaction. The present study is based on an overview of scientific literature and previous observations regarding the effects of tannery chromium effluents on exposed workers and the population in the vicinity. This study strongly suggests for use of a non-toxic substitute of chromium to be used for the tanning process and placement of tannery industries on the outskirts of the city. In South Asian developing countries like India, Pakistan and Bangladesh where the economy is strongly dependent on leather manufacturing industries, there is a need to spread proper information regarding the harmful effects of chromium toxicity to the workforce employed in the tannery and also to the people living in the surrounding area. Workers should be provided with the required safety protections like gloves, aprons, foot/shoe covers, masks, etc. Last but most important on an immediate basis is the installation of the proper efficient waste treatment plant, so that, waste should be treated before moving out of the industry.
Assuntos
Exposição Ocupacional , Saúde Ocupacional , Cromo/análise , Dano ao DNA , Países em Desenvolvimento , Humanos , Exposição Ocupacional/efeitos adversos , Estresse Oxidativo , CurtumeRESUMO
We present a hybrid metageneralized-gradient-approximation functional, revM06, which is based on adding Hartree-Fock exchange to the revM06-L functional form. Compared with the original M06 suite of density functionals, the resulting revM06 functional has significantly improved across-the-board accuracy for both main-group and transition-metal chemistry. The revM06 functional improves on the M06-2X functional for main-group and transition-metal bond energies, atomic excitation energies, isomerization energies of large molecules, molecular structures, and both weakly and strongly correlated atomic and molecular data, and it shows a clear improvement over M06 and M06-2X for noncovalent interactions, including smoother potential curves for rare-gas dimers. The revM06 functional also predicts more accurate results than M06 and M06-2X for most of the outside-the-training-set test sets examined in this study. Therefore, the revM06 functional is well-suited for a broad range of chemical applications for both main-group and transition-metal elements.
RESUMO
We review state-of-the-art electronic structure methods based both on wave function theory (WFT) and density functional theory (DFT). Strengths and limitations of both the wave function and density functional based approaches are discussed, and modern attempts to combine these two methods are presented. The challenges in modeling excited-state chemistry using both single-reference and multireference methods are described. Topics covered include background, combining density functional theory with single-configuration wave function theory, generalized Kohn-Sham (KS) theory, global hybrids, range-separated hybrids, local hybrids, using KS orbitals in many-body theory (including calculations of the self-energy and the GW approximation), Bethe-Salpeter equation, algorithms to accelerate GW calculations, combining DFT with multiconfigurational WFT, orbital-dependent correlation functionals based on multiconfigurational WFT, building multiconfigurational wave functions from KS configurations, adding correlation functionals to multiconfiguration self-consistent-field (MCSCF) energies, combining DFT with configuration-interaction singles by means of time-dependent DFT, using range separation to combine DFT with MCSCF, embedding multiconfigurational WFT in DFT, and multiconfiguration pair-density functional theory.
RESUMO
AIM: The primary objective was to assess set-up errors (SE) and secondary objective was to determine optimal safety margin (SM). BACKGROUND: To evaluate the SE and its impact on the SM utilizing electronic portal imaging (EPI) for pelvic conformal radiotherapy. MATERIAL AND METHODS: 20 cervical cancer patients were enrolled in this prospective study. Supine position with ankle and knee rest was used during CT simulation. The contouring was done using consensus guideline for intact uterus. 50â¯Gy in 25 fractions were delivered at the isocenter with ≥95% PTV coverage. Two orthogonal (Anterior and Lateral) digitally reconstructed radiograph (DRR) was constructed as a reference image. The pair of orthogonal [Anterior-Posterior and Right Lateral] single exposure EPIs during radiation was taken. The reference DRR and EPIs were compared for shifts, and SE was calculated in the X-axis, Y-axis, and Z-axis directions. RESULTS: 320 images (40 DRRs and 280 EPIs) were assessed. The systematic error in the Z-axis (AP EPI), X-axis (AP EPI), and Y-axis (Lat EPI) ranged from -12.0 to 11.8â¯mm, -10.3 to 7.5â¯mm, and -8.50 to 9.70â¯mm, while the random error ranged from 1.60 to 6.15â¯mm, 0.59 to 4.93â¯mm, and 1.02 to -4.35â¯mm. The SM computed were 7.07, 6.36, and 7.79â¯mm in the Y-axis, X-axis, and Z-axis by Van Herk's equation, and 6.0, 5.51, and 6.74â¯mm by Stroom's equation. CONCLUSION: The computed SE helps defining SM, and it may differ between institutions. In our study, the calculated SM was approximately 8â¯mm in the Z-axis, 7â¯mm in X and Y axis for pelvic conformal radiotherapy.
RESUMO
This work explores possible reaction paths for the inversion of a series of trigonal pyramidal phosphorus trihalides, PF3, PCl3, PBr3, and PI3, and it especially addresses the question of whether and when the bonding of the lowest-energy species along the inversion paths should be described as a hyper-open-shell diradical. The various paths for inversion are calculated using a single-reference method within the framework of Kohn-Sham density functional theory and also with multireference wave function methods. Our calculated results using both kinds of methods show that, for all the halogens studied (F, Cl, Br, and I), the lowest-energy singlet path for the inversion occurs by the formation of a C2 v transition structure rather than a D3 h transition structure. This geometrical preference agrees with what has been inferred previously based on closed-shell singlet calculations. But in the present study, we examined not only closed-shell singlet transition states but also open-shell singlet states and triplet states for calculating stationary points and inversion paths, and for some of the phosphorus trihalides, we found that paths involving open-shell configurations are lower in energy than those restricted to closed-shell configurations. We analyzed the changes along the paths in terms of hybridization and orientation of the frontier orbitals and in terms of locally avoided crossings, and the extent of the diradical character was quantified by calculating the effective number of unpaired electrons. Even for the singlet inversion path that goes via a D3 h structure, the barrier for PF3, PCl3, and PBr3 is higher for a closed-shell singlet spin state than for the open-shell singlet configuration. Furthermore, the energy of the triplet D3 h structure is below even that of the open-shell D3 h singlet for PCl3, PBr3, and PI3. This necessitates rethinking the role of open-shell states in nominally closed-shell processes.
RESUMO
The ability of Kohn-Sham density functional theory (KS-DFT) to accurately predict various types of electronic excitation energies with (necessarily approximate) exchange-correlation functionals faces several challenges. Chief among these is that valence excitations are usually inherently multiconfigurational and therefore best treated by functionals with local exchange, whereas Rydberg and charge-transfer excitations are often better treated with nonlocal exchange. The question arises regarding whether one can optimize a functional such that all three kinds of excitations (valence, Rydberg, and charge transfer, including long-range charge transfer) are treated in a balanced and accurate way. The goal of the present work is to try to answer that question and then to optimize a functional with the best possible balanced behavior. Of the variety of functional types available, we choose to use a range-separated hybrid meta functional for the following reasons: (i) Range separation allows the percentage of Hartree-Fock (HF) exchange to change with interelectronic separation, and therefore, one can have 100% HF exchange at large interelectronic separations, which gives good performance for long-range charge-transfer excitations, while the range separation allows one to simultaneously have smaller values of HF exchange at small and intermediate interelectronic separations, giving good performance for valence and Rydberg excitations. (ii) Meta functionals allow one to obtain better accuracy with high HF exchange than is possible with functionals whose local part depends only on spin densities and their gradients. This work starts with the range-separated hybrid meta functional M11 and reoptimizes it (with strong smoothness restraints) against electronic excitation energies and ground-state properties to obtain a new functional called revM11 that gives good performance for all three types of electronic excitations and at the same time gives very good predictions across the board for ground-state properties.
RESUMO
The accuracy of density functional theory (DFT) is often judged by predicted dissociation energies, but one should also consider charge densities as illustrated here for dissociation of heteronuclear diatomic molecules, including ionic bonds for which local density functionals yield erroneous results. Some hybrid density functionals with 100% exact exchange in Kohn-Sham DFT and the local functionals in multiconfiguration pair-density functional theory give relatively acurate dissociation energies for NaCl, and they correctly yield uncharged dissociated atoms.
RESUMO
Spin-state energetics are important for understanding properties that involve more than one spin state, for example, catalysis occurring on two or more potential energy surfaces corresponding to different electronic spins. Very often, multiple-spin processes involve transition-metal compounds, and therefore, it is important to understand the electronic structure and energetics of such compounds in different spin states. In this work, we benchmark relative spin-state energies of FeF2 with respect to the quintet ground spin state using both single-configurational and multiconfigurational methods, and we examine how they are affected by the binding of ethane and ethylene to the iron center. We also benchmark the binding energies of the complexes. The single-configurational methods used in this work are the Hartree-Fock method, 32 exchange-correlation functionals, and the CCSD(T) coupled-cluster method in both restricted and unrestricted formalisms. The multiconfigurational methods that have been used are CASSCF, CASPT2, CASPT3, MRCI, MRCI+Q, and MR-ACPF. The spin-state splitting energies depend on the functional chosen, and of the 32 exchange-correlation functionals investigated here, we find that for the septet and spin-projected triplet states of FeF2 the M06 functional is the best when compared to our best estimates from multireference calculations. If all nine excitation energies are considered, where there are three excited spin states (singlet, triplet, and septet) for each of the three systems (FeF2, FeF2···ethane, and FeF2···ethylene), the three best-performing functionals are HLE16, SOGGA11-X, and M06-2X. We find that the binding of ethane perturbs the relative spin-state energy of FeF2 by only a small amount, but the stronger binding of ethylene has a larger effect. For the spin-state splitting energies of FeF2 using single-reference CCSD(T), we find that the predicted results depend very strongly on precisely how the calculations are done, in particular, on the spin-restricted or spin-unrestricted character of the SCF reference state, which can differ even by around 50 kcal/mol for the SCF reference state and the subsequent CCSD(T) calculations. Upon analyzing the wave functions of both the spin-restricted or spin-unrestricted formalisms, we find that the lowest-energy singlet and triplet states of the complexes, just like FeF2 in isolation, can have more unpaired electrons than they are usually assumed to have, i.e., they can be hyper open-shell electronic configurations, and this can significantly lower the energy.
RESUMO
Excited spin states are important for reactivity, catalysis, and magnetic applications. This work examines the relative energies of the spin states of O atom, Fe2+ ion, and FeF2 and characterizes their excited spin states. Both single-configuration and multireference methods are used to establish the character of the lowest singlet excited state of all three systems and the lowest triplet excited state of Fe2+ and FeF2. We find that the conventional representation of the orbital occupancies is incorrect in that the states have more unpaired electrons than the minimum number required by their total electron spin quantum number. In particular, we find that, for a given spin state, an electronic configuration with more than 2S unpaired electrons is more stable than the configuration with 2S unpaired electrons (where S is the spin of the system). For instance, triplet FeF2 with four unpaired electrons is lower in energy than triplet FeF2 with two unpaired electrons. Such highly open-shell configurations are labeled as hyper open-shell electronic configurations in this work and are compared to ordinary open-shell or closed-shell electronic configurations. The hyper open-shell states considered in this work are especially interesting because, unlike typical biradicals and polyradicals, the unpaired electrons are all on the same center. This work shows that the conventional perspective on spin-state energetics that usually assumes ordinary open shells for single-centered radicals needs modification to take into account, whenever possible, hyper open-shell configurations as well.
RESUMO
Dipole moments are the first moment of electron density and are fundamental quantities that are often available from experiments. An exchange-correlation functional that leads to an accurate representation of the charge distribution of a molecule should accurately predict the dipole moments of the molecule. It is well known that Kohn-Sham density functional theory (DFT) is more accurate for the energetics of single-reference systems than for the energetics of multi-reference ones, but there has been less study of charge distributions. In this work, we benchmark 48 density functionals chosen with various combinations of ingredients, against accurate experimental data for dipole moments of 78 molecules, in particular 55 single-reference molecules and 23 multi-reference ones. We chose both organic and inorganic molecules, and within the category of inorganic molecules there are both main-group and transition-metal-containing molecules, with some of them being multi-reference. As one would expect, the multi-reference molecules are not as well described by single-reference DFT, and the functionals tested in this work do show larger mean unsigned errors (MUEs) for the 23 multi-reference molecules than the single-reference ones. Five of the 78 molecules have relatively large experimental error bars and were therefore not included in calculating the overall MUEs. For the 73 molecules not excluded, we find that three of the hybrid functionals, B97-1, PBE0, and TPSSh (each with less than or equal to 25% Hartree-Fock (HF) exchange), the range-separated hybrid functional, HSE06 (with HF exchange decreasing from 25% to 0 as interelectronic distance increases), and the hybrid functional, PW6B95 (with 28% HF exchange) are the best performing functionals with each yielding an MUE of 0.18 D. Perhaps the most significant finding of this study is that there exists great similarity among the success rate of various functionals in predicting dipole moments. In particular, of 39 functionals designed as general-purpose functionals and that do not have a global value of 100% HF exchange, the average MUE is 0.23 D, with a standard deviation of only 0.04 D. Among gradient approximations, which are especially interesting because of their speed and portability, the best overall performance is by PBE, HCTH/407, OLYP, OreLYP, and GAM, each with MUE of 0.22 D.
RESUMO
Our ability to understand and simulate the reactions catalyzed by iron depends strongly on our ability to predict the relative energetics of spin states. In this work, we studied the electronic structures of Fe2+ ion, gaseous FeO and 14 iron complexes using Kohn-Sham density functional theory with particular focus on determining the ground spin state of these species as well as the magnitudes of relevant spin-state energy splittings. The 14 iron complexes investigated in this work have hexacoordinate geometries of which seven are Fe(ii), five are Fe(iii) and two are Fe(iv) complexes. These are calculated using 20 exchange-correlation functionals. In particular, we use a local spin density approximation (LSDA) - GVWN5, four generalized gradient approximations (GGAs) - BLYP, PBE, OPBE and OLYP, two non-separable gradient approximations (NGAs) - GAM and N12, two meta-GGAs - M06-L and M11-L, a meta-NGA - MN15-L, five hybrid GGAs - B3LYP, B3LYP*, PBE0, B97-3 and SOGGA11-X, four hybrid meta-GGAs - M06, PW6B95, MPW1B95 and M08-SO and a hybrid meta-NGA - MN15. The density functional results are compared to reference data, which include experimental results as well as the results of diffusion Monte Carlo (DMC) calculations and ligand field theory estimates from the literature. For the Fe2+ ion, all functionals except M11-L correctly predict the ground spin state to be quintet. However, quantitatively, most of the functionals are not close to the experimentally determined spin-state splitting energies. For FeO all functionals predict quintet to be the ground spin state. For the 14 iron complexes, the hybrid functionals B3LYP, MPW1B95 and MN15 correctly predict the ground spin state of 13 out of 14 complexes and PW6B95 gets all the 14 complexes right. The local functionals, OPBE, OLYP and M06-L, predict the correct ground spin state for 12 out of 14 complexes. Two of the tested functionals are not recommended to be used for this type of study, in particular M08-SO and M11-L, because M08-SO systematically overstabilizes the high spin state, and M11-L systematically overstabilizes the low spin state.
RESUMO
Damped dispersion can be a significant component of the interaction energy in many physical and chemical processes, for example, physisorption and noncovalent complexation. For physically interpreting and modeling such processes, it is convenient to have an analytic method to calculate damped dispersion that is readily applicable across the entire periodic table. Of the available methods to calculate damped dispersion energy for interacting systems with overlapping charge distributions, we select symmetry-adapted perturbation theory (SAPT) as providing a reasonable definition, and of the possible analytic forms, we choose the D3(BJ) method. However, the available parametrizations of D3(BJ) include not only damped dispersion energy but also corrections for errors in specific exchange-correlation functionals. Here we present a parametrization that provides a physical measure of damped dispersion without such density functional corrections. The method generalizes an earlier method of Pernal and co-workers to all elements from hydrogen to plutonium.
RESUMO
We report electronic, vibrational, and magnetic properties, together with their structural dependences, for the metal-organic framework Fe2(dobdc) (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) and its derivatives, Fe2(O)2(dobdc) and Fe2(OH)2(dobdc)-species arising in the previously proposed mechanism for the oxidation of ethane to ethanol using N2O as an oxidant. Magnetic susceptibility measurements reported for Fe2(dobdc) in an earlier study and reported in the current study for Fe(II)0.26[Fe(III)(OH)]1.74(dobdc)(DMF)0.15(THF)0.22, which is more simply referred to as Fe2(OH)2(dobdc), were used to confirm the computational results. Theory was also compared to experiment for infrared spectra and powder X-ray diffraction structures. Structural and magnetic properties were computed by using Kohn-Sham density functional theory both with periodic boundary conditions and with cluster models. In addition, we studied the effects of different treatments of the exchange interactions on the magnetic coupling parameters by comparing several approaches to the exchange-correlation functional: generalized gradient approximation (GGA), GGA with empirical Coulomb and exchange integrals for 3d electrons (GGA+U), nonseparable gradient approximation (NGA) with empirical Coulomb and exchange integrals for 3d electrons (NGA+U), hybrid GGA, meta-GGA, and hybrid meta-GGA. We found the coupling between the metal centers along a chain to be ferromagnetic in the case of Fe2(dobdc) and antiferromagnetic in the cases of Fe2(O)2(dobdc) and Fe2(OH)2(dobdc). The shift in magnetic coupling behavior correlates with the changing electronic structure of the framework, which derives from both structural and electronic changes that occur upon metal oxidation and addition of the charge-balancing oxo and hydroxo ligands.
RESUMO
Heat shock factor 1 (HSF1) protects neurons from death caused by the accumulation of misfolded proteins. It is believed that this protective effect is mediated by the transcriptional stimulation of genes encoding heat shock proteins (HSPs), a family of chaperones that refold or degrade misfolded proteins. Whether HSF1 is protective when neuronal death is not caused by protein misfolding has not been studied. Here, we report that HSF1 expression is necessary for the survival of rat neurons and that HSF1 mRNA and protein expression is reduced in neurons primed to die. Knock-down of HSF1 induces death of otherwise healthy neurons, whereas reestablishment of elevated levels of HSF1 protects neurons even when death is not due to accumulation of misfolded proteins. Neuroprotection by HSF1 does not require its trimerization, an event obligatory for the binding of HSF1 to heat shock elements within HSP gene promoters. Moreover, knock-down of HSP70 or blockade of HSP90 signaling does not reduce neuroprotection by HSF1. Although several neuroprotective molecules and signaling pathways, including CaMK, PKA, Casein kinase-II, and the Raf-MEK-ERK and PI-3K-Akt pathways, are not required for HSF1-mediated neuroprotection, protection is abrogated by inhibition of classical histone deacetylases (HDACs). We report that the novel mechanism of neuroprotection by HSF1 involves cooperation with SIRT1, an HDAC with well documented neuroprotective effects. Using a cell culture model of Huntington's disease, we show that HSF1 trimerization is not required for protection against mutant huntingtin-induced neurotoxicity, suggesting that HSF1 can protect neurons against both proteinopathic and nonproteinopathic death through a noncanonical pathway.
Assuntos
Proteínas de Ligação a DNA/metabolismo , Proteínas de Choque Térmico/metabolismo , Neurônios/metabolismo , Fármacos Neuroprotetores/metabolismo , Multimerização Proteica/efeitos dos fármacos , Fatores de Transcrição/metabolismo , Animais , Animais Recém-Nascidos , Apoptose/efeitos dos fármacos , Apoptose/genética , Encéfalo/citologia , Células Cultivadas , Imunoprecipitação da Cromatina , Proteínas de Ligação a DNA/genética , Inibidores Enzimáticos/farmacologia , Feminino , Regulação da Expressão Gênica/efeitos dos fármacos , Regulação da Expressão Gênica/genética , Fatores de Transcrição de Choque Térmico , Proteínas de Choque Térmico/genética , Humanos , Masculino , Camundongos , Neurônios/efeitos dos fármacos , Fármacos Neuroprotetores/farmacologia , Niacinamida/farmacologia , Estrutura Terciária de Proteína/efeitos dos fármacos , Estrutura Terciária de Proteína/genética , Ratos , Ratos Wistar , Transdução de Sinais/efeitos dos fármacos , Transdução de Sinais/genética , Fatores de Tempo , Fatores de Transcrição/genética , Complexo Vitamínico B/farmacologiaRESUMO
The catalytic properties of the metal-organic framework Fe2(dobdc), containing open Fe(II) sites, include hydroxylation of phenol by pure Fe2(dobdc) and hydroxylation of ethane by its magnesium-diluted analogue, Fe0.1Mg1.9(dobdc). In earlier work, the latter reaction was proposed to occur through a redox mechanism involving the generation of an iron(IV)-oxo species, which is an intermediate that is also observed or postulated (depending on the case) in some heme and nonheme enzymes and their model complexes. In the present work, we present a detailed mechanism by which the catalytic material, Fe0.1Mg1.9(dobdc), activates the strong C-H bonds of ethane. Kohn-Sham density functional and multireference wave function calculations have been performed to characterize the electronic structure of key species. We show that the catalytic nonheme-Fe hydroxylation of the strong C-H bond of ethane proceeds by a quintet single-state σ-attack pathway after the formation of highly reactive iron-oxo intermediate. The mechanistic pathway involves three key transition states, with the highest activation barrier for the transfer of oxygen from N2O to the Fe(II) center. The uncatalyzed reaction, where nitrous oxide directly oxidizes ethane to ethanol is found to have an activation barrier of 280 kJ/mol, in contrast to 82 kJ/mol for the slowest step in the iron(IV)-oxo catalytic mechanism. The energetics of the C-H bond activation steps of ethane and methane are also compared. Dehydrogenation and dissociation pathways that can compete with the formation of ethanol were shown to involve higher barriers than the hydroxylation pathway.