RESUMO
In this paper, we present the development of a photonic biosensor device for cancer treatment monitoring as a complementary diagnostics tool. The proposed device combines multidisciplinary concepts from the photonic, nano-biochemical, micro-fluidic and reader/packaging platforms aiming to overcome limitations related to detection reliability, sensitivity, specificity, compactness and cost issues. The photonic sensor is based on an array of six asymmetric Mach Zender Interferometer (aMZI) waveguides on silicon nitride substrates and the sensing is performed by measuring the phase shift of the output signal, caused by the binding of the analyte on the functionalized aMZI surface. According to the morphological design of the waveguides, an improved sensitivity is achieved in comparison to the current technologies (<5000 nm/RIU). This platform is combined with a novel biofunctionalization methodology that involves material-selective surface chemistries and the high-resolution laser printing of biomaterials resulting in the development of an integrated photonics biosensor device that employs disposable microfluidics cartridges. The device is tested with cancer patient blood serum samples. The detection of periostin (POSTN) and transforming growth factor beta-induced protein (TGFBI), two circulating biomarkers overexpressed by cancer stem cells, is achieved in cancer patient serum with the use of the device.
Assuntos
Técnicas Biossensoriais , Neoplasias , Humanos , Interferometria , Neoplasias/diagnóstico , Neoplasias/terapia , Óptica e Fotônica , Fótons , Reprodutibilidade dos TestesRESUMO
A microfluidic pump based on electroosmosis of the second kind was designed and fabricated. Experimental results using DC and AC voltages showed a close to second-order relationship between flow and voltage, in good agreement with theory. The experimental flow rates were considerably lower than the predicted maximum for the micropumps, which can be attributed to the hydrodynamic resistance of the channel network. This also indicates that higher flow velocities are obtainable for modified pump designs.
Assuntos
Eletro-Osmose , Técnicas Analíticas Microfluídicas/instrumentação , Microfluídica/instrumentação , Eletroquímica , Análise de Injeção de Fluxo , Técnicas Analíticas Microfluídicas/métodos , Microfluídica/métodosRESUMO
We report on a stand-alone single-chip (7 x 10 mm) atomic force microscopy unit including a fully integrated array of cantilevers, each of which has an individual actuation, detection, and control unit so that standard atomic force microscopy operations can be performed by means of the chip only without any external controller. The system offers drastically reduced overall size and costs as well as increased scanning speed and can be fabricated with standard complementary metal oxide semiconductor technology with some subsequent micromachining steps to form the cantilevers. Full integration of microelectronic and micromechanical components on the same chip allows for the controlling and monitoring of all system functions. The on-chip circuitry, which includes analog signal amplification and filtering stages with offset compensation, analog-to-digital converters, a powerful digital signal processor, and an on-chip digital interface for data transmission, notably improves the overall system performance. The microsystem characterization evidenced a vertical resolution of < 1 nm and a force resolution of < 1 nN as shown in the measurement results. The monolithic system represents a paradigm of a mechatronic microsystem that allows for precise and fully controlled mechanical manipulation in the nanoworld.