Spatiotemporal gait parameters while cross-slope residential roof walking.

Falls from residential roofs account for 80% of roofing industry fatalities. Furthermore, roofing work represents 44.7% of work in residual construction specialty trades and residential roofers count for 2.1% of overall workers in construction, with an anticipated growth in roofers of 14.9% by 2024. The purpose of the study was to evaluate the alterations in spatiotemporal gait parameters while traversing along a 6/12 pitched residential roof segment. Eighteen of the nineteen calculated spatiotemporal variables were statistically, significantly changed by walking across a 6/12 pitched simulated residential roof. The study clearly demonstrates that spatiotemporal gait variables increase and decrease while traversing across a residential roof. The changes in spatiotemporal parameters might suggest alterations to a person's balance system resulting in an increased risk of falling. The knowledge generated in the current study will be relevant to the residential roofing industry when it can be used in educational materials to increase awareness of how a roofer's altered gait while working on a pitched roof may increase their falling risk.

The Effects of Various Weighted Implements on Baseball Swing Kinematics in Collegiate Baseball Players.

Williams, CC, Gdovin, JR, Wilson, SJ, Cazas-Moreno, VL, Eason, JD, Hoke, EL, Allen, CR, Wade, C, and Garner, JC. The effects of various weighted implements on baseball swing kinematics in collegiate baseball players. J Strength Cond Res 33(5): 1347-1353, 2019-The purpose of this study was to investigate the effects of different warm-up (WU) devices on bat swing parameters including maximal resultant velocity (MRV), resultant velocity at ball contact (RVBC), time difference between MRV and RVBC, bat angle at MRV, bat angle at RVBC, and perceptual differences of each WU implement used by National Collegiate Athletic Association Division-I baseball players. Fifteen varsity baseball players completed 1 experimental session during fall training. Retroreflective markers were placed on the bat and tee to measure basic bat kinematics during the swing. Participants completed a general calisthenics WU before being counter-balanced into 1 of 4 WU conditions: standard bat (SB) (33 in/30 oz), fungo (10.6 oz), weighted gloves with SB (weighted gloves) (55.6 oz) and donut with SB (donut) (55.6 oz). Each participant was asked to perform their normal on-deck routine over a 2-minute period, finishing with 5 practice swings with the designated condition. After completion of the WU, a 1-minute rest period (simulating normal game conditions) was given to allow each participant to get set to perform 5 maximal swings with a SB. Five, 1 × 4 (group × condition) repeated measures analysis of variance examined the aforementioned variables. There were no significant differences in MRV, RVBC, time difference between MRV and RVBC, and bat angle at MRV and RVBC between all WU conditions. If presented with the current options, athletes should choose the WU implement with which they are most comfortable using before an at-bat situation.

Impact of military type footwear and load carrying workload on postural stability.

Postural stability has been shown to be impacted by footwear and task performed. This study analysed the impact of two military footwear, standard boot (STB) and minimalist boot (MTB) on postural stability, before (PRE) and after (POST) a load carriage task. Sixteen participants were tested for postural stability using sensory organisation and motor control tests on Neurocom Equitest™. Postural sway, equilibrium scores and postural latencies were analysed using a two-factor repeated measures ANOVA: boot type (STB-MTB) × time (PRE-POST) load carriage task. Significantly greater postural sway variables, lower balance scores and slower postural latencies were seen in STB and POST load carriage conditions (p < .05). The results suggest that MTB exhibited greater balance compared to STB in balance conditions that rely on somatosensory feedback and that balance is lowered after a load carriage task. Decrements in postural stability could be attributed to boot design characteristics and muscular exertion due to the load carriage task. Practitioner Summary: Maintaining optimal postural stability is crucial in military. Impact of military footwear types and load carriage task on postural stability are addressed. Findings provide footwear design and physical exertion implications on postural stability leading to potential interventions that reduce postural stability decrements; thereby, reducing potential falls and fall related injuries.

Walking on ballast impacts balance.

Railroad workers often perform daily work activities on irregular surfaces, specifically on ballast rock. Previous research and injury epidemiology have suggested a relationship between working on irregular surfaces and postural instability. The purpose of this study was to examine the impact of walking on ballast for an extended duration on standing balance. A total of 16 healthy adult males walked on a 7.62 m × 4.57 m (25 ft × 15 ft) walking surface of no ballast (NB) or covered with ballast (B) of an average rock size of about 1 inch for 4 h. Balance was evaluated using dynamic posturography with the NeuroCom(®) Equitest System(™) prior to experiencing the NB or B surface and again every 30 min during the 4 h of ballast exposure. Dependent variables were the sway velocity and root-mean-square (RMS) sway components in the medial-lateral and anterior-posterior directions. Repeated measures ANOVA revealed statistically significant differences in RMS and sway velocity between ballast surface conditions and across exposure times. Overall, the ballast surface condition induced greater sway in all of the dynamic posturography conditions. Walking on irregular surfaces for extended durations has a deleterious effect on balance compared to walking on a surface without ballast. These findings of changes in balance during ballast exposure suggest that working on an irregular surface may impact postural control.

Impact of shoe and cleat type on youth baseball pitching biomechanics.

Shoulder and elbow injuries among baseball pitchers of various ages and abilities continue to rise despite exhaustive efforts analysing pitch type and count; however, it has yet been determined if footwear plays a role in altering pitching mechanics and subsequently injury susceptibility. Therefore, the purpose of the study was to investigate the effect footwear might have on youth baseball pitching mechanics. Data were collected on eleven youth baseball pitchers wearing two different shoes on two different surface inclinations. A repeated measures ANOVA was utilised to determine differences between upper and lower extremity joint kinematics and kinetics (p < 0.05). Results indicate wearing moulded cleats elicited significantly greater amounts of shoulder internal rotation torque, angle and velocity as well as elbow varus torque. Turf shoes caused an increased plantarflexion joint angle in the stride leg ankle and shoulder external rotation torque, angle and velocity. The findings of this study suggest that the footwear worn by a youth baseball pitcher does alter the shoulder and elbow dynamics in the dominant throwing arm as well as the amount of ankle plantarflexion in the stride leg.

The influence of body composition on youth throwing kinetics.

The primary objective of this study was to investigate the influence of segmental mass and body composition on the upper extremity biomechanics of overweight youth participating in baseball activities. The study used a regression framework to investigate the relationship between whole body, throwing arm segmental mass and body composition measures to kinetic variables about the shoulder and elbow. The multivariate regression results indicated a strong positive significant relationship between each of the mass variables to that of the moment variables about the shoulder and elbow. Participants who had a greater percentage of fat mass produced greater injury correlated moments about the shoulder and elbow.

Lower Extremity Muscle Activation in Alternative Footwear during Stance Phase of Slip Events.

Muscle activity from the slipping leg have been previously used to analyze slip induced falls. However, the impact of casual alternative footwear on slipping leg muscle activity when exposed to slippery environments is still unknown. The purpose of the study was to analyze the impact of alternative footwear (crocs (CC) and flip-flops (FF)) compared to slip-resistant footwear (LT) on lower extremity muscle activity when exposed to dry gait (NG), unexpected (US), alert (AS), and expected slips (ES). Eighteen healthy males (age: 22.3 ± 2.2 years; height: 177.7 ± 6.9 cm; weight: 79.3 ± 7.6 kg) completed the study in a repeated measures design in three footwear sessions separated by 48 h. Electromyography (EMG) muscle activity from four muscles of the lead/slipping leg was measured during the stance phase of the gait-slip trials. A 3 (footwear) × 4 (gait-slip trials) repeated measures analysis of variance was used to analyze EMG dependent variables mean, peak, and percent of maximal voluntary contraction. Greater lower extremity muscle activation during the stance phase was seen in US and AS conditions compared to NG and ES. In addition, footwear differences were seen for the alternative footwear (CC and FF) during US and AS, while the low top slip resistant shoe had no differences across all gait trials, suggesting it as the most efficient footwear of choice, especially when maneuvering slippery flooring conditions, either with or without the knowledge of an impending slip.

Sensory Organization Test Conditions Influence Postural Strategy Rather than Footwear or Workload.

BACKGROUND: Postural strategies such as ankle, hip, or combined ankle-hip strategies are used to maintain optimal postural stability, which can be influenced by the footwear type and physiological workload. PURPOSE: This paper reports previously unreported postural strategy scores during the six conditions of the sensory organization test (SOT). METHODS: Fourteen healthy males (age: 23.6 ± 1.2 years; height: 181 ± 5.3 cm; mass: 89.2 ± 14.6 kg) were tested for postural strategy adopted during SOT in three types of occupational footwear (steel-toed work boot, tactical work boot, low-top work shoe) every 30 min during a 4-h simulated occupational workload. Postural strategy scores were analyzed using repeated measures analysis of variance at 0.05 alpha level. RESULTS: Significant differences among postural strategy scores were only evident between SOT conditions, and but not between footwear type or the workload. CONCLUSIONS: Findings indicate that occupational footwear and occupational workload did not cause a significant change in reliance on postural strategies. The significant changes in postural strategy scores were due to the availability of accurate and/or conflicting sensory feedback during SOT conditions. In SOT conditions where all three types of sensory feedback was available, the ankle strategy was predominantly adopted, while more reliance on hip strategy occurred in conditions with absent or conflicting sensory feedback.

Inclination angles during cross-slope roof walking.

Residential roofers have the highest rate of falls in the construction sector with injuries and fatalities costing billions of dollars annually. The sloped roof surface is the most predominant component within the residential roof work environment. Postural stability on a sloped work environment is not well studied. Calculating inclination angles (IAs) using the lateral ankle marker could be a quality measure to determine how cross-slope roof walking will influence stability. Will cross-slope roof-walking effect anterior-posterior (AP) and medial-lateral (ML) IAs in adult males? Eleven adult males participated in two testing sessions-level and cross-slope roof gait session on a 6/12 pitched roof segment. Changes in AP and ML IAs between conditions were compared at: heel strike (HS) and toe off (TO). Legs were analyzed separately due to the cross-slope walking. The left foot was 'higher' on the sloped roof and the right was 'lower.' Significant increases (p ≤ 0.006) in IAs were observed due to the sloped roof in all conditions except the AP 'lower' leg (p = 0.136). Increases in IA suggest a decrease in postural stability as the body will result in greater sway compared to a natural posture. Increases in AP IAs may cause slipping in the anterior or posterior direction as the normal force will decrease during HS and TO. In the ML direction, fall risk is increased and more stress is placed on the hip abductors in order to reduce falling. Thus traversing a sloped roof surface reduces stability of healthy workers and escalates injury/fall risk factors.

Physiological responses to simulated stair climbing in professional firefighters wearing rubber and leather boots.

No studies have considered whether a firefighter's boots are a factor influencing physiological responses. The purpose of this study was to examine physiological responses to a fire simulation activity (stair climb) in professional firefighters wearing rubber boots (RB) and leather boots (LB). Twelve professional firefighters participated in two counterbalanced simulated firefighter stair climb (SFSC) sessions, one wearing RB and the other wearing LB. Heart rate, oxygen uptake (VO(2)), expiratory ventilation (V(E)), blood lactate (BLa), salivary cortisol (SCORT), and leg strength were assessed prior to and following a SFSC. LB elicited significantly greater SCORT values and knee flexion time to peak torque. Furthermore, RB revealed significantly greater ankle dorsiflexion peak torque after SFSC. BLa was positively related to knee flexion peak torque after SFSC in the RB. Firefighters when wearing the RB may be more effective at resisting fatigue and increase more force production.

Lower extremity kinematics of cross-slope roof walking.

Working conditions of residential roofers expose them to a unique sloped environment. The purpose of this study is to determine in what way traversing across a sloped/roof surface alters lower extremity kinematics of the upslope and downslope legs compared to level walking. College aged males negotiated across a pitched (26 degrees) roof segment during which lower extremity three-dimensional kinematics were calculated. One foot was higher on the slope and one was lower for the duration of cross slope walking. Overall, cross-slope walking on a 26 degree roof significantly altered 77% of the measured lower extremity variables compared to level self-selected pace walking. The data suggest that roof pitch incite significant differences in crossslope walking of the kinematics in the lower extremity between the upslope and down slope limbs when compared to level surface walking. These alterations could temporarily alter proprioception which may in turn lead to increased falls and musculoskeletal injury, though further study is needed.

The Interaction of Cognitive Interference, Standing Surface, and Fatigue on Lower Extremity Muscle Activity.

BACKGROUND: Performing cognitive tasks and muscular fatigue have been shown to increase muscle activity of the lower extremity during quiet standing. A common intervention to reduce muscular fatigue is to provide a softer shoe-surface interface. However, little is known regarding how muscle activity is affected by softer shoe-surface interfaces during static standing. The purpose of this study was to assess lower extremity muscular activity during erect standing on three different standing surfaces, before and after an acute workload and during cognitive tasks. METHODS: Surface electromyography was collected on ankle dorsiflexors and plantarflexors, and knee flexors and extensors of fifteen male participants. Dependent electromyography variables of mean, peak, root mean square, and cocontraction index were calculated and analyzed with a 2 × 2 × 3 within-subject repeated measures analysis of variance. RESULTS: Pre-workload muscle activity did not differ between surfaces and cognitive task conditions. However, greater muscle activity during post-workload balance assessment was found, specifically during the cognitive task. Cognitive task errors did not differ between surface and workload. CONCLUSIONS: The cognitive task after workload increased lower extremity muscular activity compared to quite standing, irrespective of the surface condition, suggesting an increased demand was placed on the postural control system as the result of both fatigue and cognitive task.

Return-to-Duty Rates Following Minimally Invasive Spine Surgery Performed on Active Duty Military Patients in an Ambulatory Surgery Center.

BACKGROUND: Low back pain is a primary health care utilization driver in the US population. Health care evaluation visits for low back pain are as common as medical evaluation for the common cold. Low back pain is the most common reason for reductions in activities of daily living and work activity in the general population. Although these statistics are compelling, in the military population, there is arguably a significantly greater economic impact on the military population, as the cost to train, retain, and deploy a service member is a tremendous cost. METHODS: The current study retrospectively examines surgical outcomes, return to duty, and patient-centric outcomes among 82 active duty or reserve military patients who underwent an outpatient minimally invasive spine surgery Laminotomy Foraminotomy Decompression for the treatment of lumbar spinal stenosis in an ambulatory surgery center. FINDINGS: Overall, our results indicate that within the 82 active duty military service members, 100% of the service members return to duty within 3 mo. Additionally, there was a significant reduction in self-reported pain and disability 12 mo postoperative, whereas the average length of surgery was 62 min with an average estimated blood loss of 30.64 mL. DISCUSSION: The current study indicates that minimally invasive procedures for the treatment of lumbar spinal stenosis in an ambulatory surgery center setting are an effective option for active duty servicemen to reduce return-to-duty rates and symptomatic back-related pain and disability.

The segmental distribution of cervical range of motion: A comparison of ACDF versus TDR-C.

This study was a retrospective radiographic evaluation of patients after cervical total disc replacement (TDR-C) or anterior cervical discectomy and fusion (ACDF) for one-level cervical disc disease. Our objective was to evaluate (1) total cervical (C1-C7) range of motion (ROM) during dynamic imaging, and (2) relative contribution to total cervical ROM from operative and adjacent levels. Radiographic review of 64 patients who underwent TDR-C (n = 30) or ACDF (n = 34) for one-level cervical disc disease. ROM measurements were performed independently using a vertebral motion analysis system to evaluate total cervical ROM and relative contribution to total ROM from each level (C1-C7) preoperatively and at 12-month follow-up. At follow-up, TDR-C patients had significantly greater improvement in total cervical ROM (+5.67°, 1.15 mm) than ACDF patients (-0.96°, 0.12 mm) (P = 0.001). In TDR-C patients, relative contributions to total cervical ROM from operative and adjacent caudal and cranial levels were statistically equivalent to baseline values. ACDF patients had a significantly reduced contribution to total cervical ROM from the operative level (-22.5%, P < 0.001) and significantly elevated contributions from the adjacent caudal level (+16.5%-21.3%, P < 0.001) and from the adjacent first (20.6% vs. 34.6%, P < 0.001), second (22.9% vs. 30.4%, P < 0.001), and third cranial levels (17.5% vs. 25.6%, P < 0.001). The cervical spine compensates for loss of ROM at the operative level in ACDF patients. However, total cervical ROM increases with TDR-C and maintains physiologic distribution of ROM throughout the cervical spine at 12-month follow-up, potentially reducing the risk for adjacent segment breakdown.

The Influence of an Acute Bout of Whole Body Vibration on Human Postural Control Responses.

The use of vibrating platforms has become increasingly available, and popular at sports and rehabilitation institutes. Given the discrepancies in the literature regarding whole body vibration (WBV) and human reflexive responses, the purpose of this study was to examine the acute effects of WBV on postural response latencies, as well as associated electromyography measures of the lower extremities during balance perturbations. Reflexive responses during backward and forward balance perturbations were examined before, after, and 10 min after a bout of WBV. The findings suggest that following an acute bout of whole body vibration, muscle activity of the lower extremities is decreased during a reflexive response to an unexpected perturbation, and may be associated with faster reaction time.

Slip initiation in alternative and slip-resistant footwear.

Slips occur as a result of failure of normal locomotion. The purpose of this study is to analyze the impact of alternative footwear (Crocs™, flip-flops) and an industry standard low-top slip-resistant shoe (SRS) under multiple gait trials (normal dry, unexpected slip, alert slip and expected slip) on lower extremity joint kinematics, kinetics and muscle activity. Eighteen healthy male participants (age: 22.28 ± 2.2 years; height: 177.66 ± 6.9 cm; mass: 79.27 ± 7.6 kg) completed the study. Kinematic, kinetic and muscle activity variables were analyzed using a 3(footwear) × 4(gait trials) repeated-measures analysis of variance at p = 0.05. Greater plantar flexion angles, lower ground reaction forces and greater muscle activity were seen on slip trials with the alternative footwear. During slip events, SRS closely resembled normal dry biomechanics, suggesting it to be a safer footwear choice compared with alternative footwear.

Variability in Flexion Extension Radiographs of the Lumbar Spine: A Comparison of Uncontrolled and Controlled Bending.

BACKGROUND: While low back pain is one of the most prevalent, if not the most prevalent reasons for visits to physicians, a majority of patients with low back pain cannot be given a definitive diagnosis. While there have been substantial advances in imaging technologies over the past 30 years, relatively little has changed in the methodologies for evaluating functionality of the lumbar spine. The current standard of care for function assessment of the lumbar spine focuses on uncontrolled patient directed motion which results in increased inter-patient variability. Recent advancements in functional lumbar spine testing utilize controlled bending and computerized imaging evaluation. PURPOSE: To compare the measurement variability of lumbar spine motion when diagnosed using measurements of intervertebral motion taken from standard bending flexion/extension radiographs (FE) between uncontrolled and controlled motion. STUDY DESIGN: One-hundred nine patients (57 asymptomatic, 52 symptomatic) were consented in the prospective investigation. The research was designed to compare studies involving FE to controlled motion bending radiographs using the Vertebral Motion Analysis (VMA), (Ortho Kinematics, Inc) within the same patient. Each patient agreed to undergo fluoroscopic still imaging to capture FE data and to undergo cine fluoroscopic imaging to capture VMA data. OUTCOME MEASURES: Measurement variability was determined by the mean and standard deviation of intervertebral rotation when evaluated by 5 independent observers evaluating each of the 109 patients FE and VMA. The resulting standard deviation of the intervertebral rotation determinations was used as the measure of variability. METHODS: The VMA measurements for assessing intervertebral motion were characterized by the use of: (1) a handling device that assists patients through a standard arc of lumbar bending in both an upright and recumbent posture (70 degree flexion/extension arcs; 60 degree left/right bending arcs); (2) video fluoroscopy imaging of the lumbar spine during bending (capturing images at 8 frames per second); and (3) image processing software capable of automatic frame-to-frame registration and tracking of vertebral bodies across the sequence of video-fluoroscopic images to derive measurements of intervertebral rotation and translation. The FE data were assessed from voluntary bending by the patient. RESULTS: There was statistical greater measurement variability in intervertebral rotation in FE when compared to VMA (both standing and lying). When comparing measurement variability between FE and VMA, results indicate between a 26% to 46% decrease in measurement variability under VMA compared to FE. These findings are consistent across asymptomatic and symptomatic patients. CONCLUSIONS: The current standard of care for functional testing of the lumbar spine utilizes uncontrolled FE with a manual data evaluation process. Recent developments in using computerized imaging processes has improved, however there remains variability in patient bending due to the self-selected rate and position of the bending. VMA results in a significant reduction in measurement variability of intervertebral rotation measurements.

Measurement Performance of a Computer Assisted Vertebral Motion Analysis System.

BACKGROUND: Segmental instability of the lumbar spine is a significant cost within the US health care system; however current thresholds for indication of radiographic instability are not well defined. PURPOSE: To determine the performance measurements of sagittal lumbar intervertebral measurements using computerassisted measurements of the lumbar spine using motion sequences from a video-fluoroscopic technique. STUDY DESIGN: Sensitivity, specificity, predictive values, prevalence, and test-retest reliability evaluation of digitized manual versus computer-assisted measurements of the lumbar spine. PATIENT SAMPLE: A total of 2239 intervertebral levels from 509 symptomatic patients, and 287 intervertebral levels from 73 asymptomatic participants were retrospectively evaluated. OUTCOME MEASURES: Specificity, sensitivity, negative predictive value (NPV), diagnostic accuracy, and prevalence between the two measurement techniques; Measurements of Coefficient of repeatability (CR), limits of agreement (LOA), intraclass correlation coefficient (ICC; type 3,1), and standard error of measurement for both measurement techniques. METHODS: Asymptomatic individuals and symptomatic patients were all evaluated using both the Vertebral Motion Analysis (VMA) system and fluoroscopic flexion extension static radiographs (FE). The analysis was compared to known thresholds of 15% intervertebral translation (IVT, equivalent to 5.3mm assuming a 35mm vertebral body depth) and 25° intervertebral rotation (IVR). RESULTS: The VMA measurements demonstrated greater specificity, % change in sensitivity, NPV, prevalence, and reliability compared with FE for radiographic evidence of instability. Specificity was 99.4% and 99.1% in the VMA compared to 98.3% and 98.2% in the FE for IVR and IVT, respectively. Sensitivity in this study was 41.2% and 44.6% greater in the VMA compared to the FE for IVR and IVT, respectively. NPV was 91% and 88% in the VMA compared to 62% and 66% in the FE for IVR and IVT, respectively. Prevalence was 12.3% and 11.9% for the VMA compared to 6.1% and 5.4% for the FE in IVR and IVT, respectively. Intra-observer IVR and IVT had a CR of 2.49 and 2.62, respectively. Inter-observer IVR and IVT had a CR of 1.99 and 2.81, respectively. Intra-subject (test/retest) CR were 2.49 and 3.11 for IVR and IVT, respectively. CONCLUSIONS: The VMA system showed greater measurement performance in the detection of radiographic instability compared with FE radiographs.

Balance and exposure to an elevated sloped surface.

Fall injuries and fatalities exceed 50 billion dollars annually. One half of fatal falls are from pitched roof settings. Falls from elevation in an occupational setting have been documented to be a significant issue in today's workforce. The purpose of this study was to investigate the influence of exposure to inclined surfaces on flat surface balance at varying heights above the ground. Thirty participants, 10 male college students (inexperienced), 10 female college students (inexperienced) and 10 male roofers (experienced) between age 19 and 50 years participated in this study. Participants walked for 20 min on an elevated roof segment (9-14 feet above ground level) and a ground level roof segment (0-5 feet above ground level) on separate days. Results indicated a significant difference for all groups in sway velocity over time at both levels (elevated and ground) and from eyes open to eyes closed conditions at both levels (p<0.05). Statistical analysis revealed that roofers had significantly less increase in sway velocity, post exposure than that of the inexperienced group (p<0.05). These findings provide practical information to employers and employees during the construction of structures that employ a pitched roof design. The implication of these findings include the knowledge that an individual is less stable directly after performing roofing tasks on a pitched roof setting, and should be afforded ample time to recover before moving into activities that would place them at a higher risk of injury from falls.

Review of walking hazards for railroad workers.

This is a review of walking tasks in the railroad environment, and the injuries that result from slips, trips, falls, or other acute or even non-traumatic exposures. The lack of federal regulations for railroad walkways has led several states to develop and enforce their own regulations. Support from the research literature for such regulations has come from biomechanical studies of the effects of walking on railroad ballast, which will be reviewed.