RESUMO
BACKGROUND: The potential for acute exercise to enhance attention has been discussed in the literature. However, the neural mechanisms by which acute exercise affects attention remain elusive. METHOD: In this study, we first identified an optimized acute Tai Chi Chuan (ATCC) exercise protocol that enhances sustained attention performance and then aimed to determine the neural substrates of exercise-enhanced attention. Reaction time (RT) from the psychomotor vigilance test (PVT) was used to evaluate sustained attention. In Experiment 1, improvements in RTs were compared among six different exercise protocols. In Experiment 2, the participants completed the PVT in an MRI scanner on both rest and exercise days. RESULTS: Experiment 1 showed that practicing TCC 3 times for a total of 20 minutes, followed by 10-minute rest periods, resulted in the largest improvements in RTs. Experiment 2 showed that ATCC enhanced sustained attention, as evidenced by shorter RTs, and resulted in greater cuneus/precuneus activation after exercise than in the rest condition. Exercise-induced changes in brain activities across a distributed network exhibited significant correlations with attention. CONCLUSION: Therefore, this study indicates that ATCC effectively enhances sustained attention and underscores the key role of the cuneus/precuneus and frontoparietal-cerebellar regions in facilitating vigilance among young adults.
Assuntos
Tai Chi Chuan , Humanos , Adulto Jovem , Tai Chi Chuan/métodos , Exercício Físico , Lobo Occipital , Lobo Parietal , AtençãoRESUMO
Lead-based radicals in the oxidation state of +1 are elusive species and are highly challenging to isolate in the condensed phase. In this study, we present the synthesis and characterization of the first isolable free plumbylyne radical 2 bearing a one-coordinate Pb(I) atom. It reacts with an N-heterocyclic carbene (NHC) to afford a two-coordinate NHC-ligated Pb(I) radical 3. 2 and 3 represent the first isolable Pb(I)-based radicals. Theoretical calculations and electron paramagnetic resonance analysis revealed that the unpaired electron mainly resides at the Pb 6p orbital in both radicals. Owing to the unique one-coordinate nature of the Pb atom in 2, it possesses two-fold orbital pseudo-degeneracy and substantial unquenched orbital angular momentum, and exhibits hitherto strongest g-factor anisotropy (gx,y,z=1.496, 1.166, 0.683) amongst main group radicals. Preliminary investigations into the reactivity of 2 unveiled its Pb-centered radical nature, and plumbylenes were isolated as products.
RESUMO
Due to their intrinsic high reactivity, isolation of heavier analogues of carbynes remains a great challenge. Here, we report the synthesis and characterization of a neutral monosubstituted Sn(I) radical (2) supported by a sterically hindered hydrindacene ligand, which represents the first tin analogue of a free carbyne. Different from all Sn(I/III) species reported thus far, the presence of a sole Sn-C σ bond in 2 renders the remaining two Sn 5p orbitals energetically almost degenerate, of which one is singly occupied and the other is empty. Consequently, its S = 1/2 ground state possesses two-fold orbital pseudo-degeneracy and substantial unquenched orbital angular momentum, as evidenced by one component of its g matrix (1.957, 1.896, and 1.578) being considerably less than 2. Consistent with this unique electronic structure, 2 can bind to an N-heterocyclic carbene to afford a neutral two-coordinate Sn(I) radical and initiate a one-electron transfer to benzophenone to furnish a Sn(II)-ketyl radical anion adduct. As a manifestation of its Sn-centered radical nature, 2 reacts with diphenyl diselenide and p-benzoquinone to form Sn-S and Sn-O bonds, respectively.
RESUMO
Spinal cord injury (SCI) is a medical condition that results from severe trauma to the central nervous system; it imposes great psychological and economic burdens on affected patients and their families. The dynamic balance between reactive oxygen species (ROS) and antioxidants is essential for maintaining normal cellular physiological functions. As important intracellular signaling molecules, ROS regulate numerous physiological activities, including vascular reactivity and neuronal function. However, excessive ROS can cause damage to cellular macromolecules, including DNA, lipids, and proteins; this damage eventually leads to cell death. This review discusses the mechanisms of oxidative stress in SCI and describes some signaling pathways that regulate oxidative injury after injury, with the aim of providing guidance for the development of novel SCI treatment strategies.
Assuntos
Estresse Oxidativo , Traumatismos da Medula Espinal , Humanos , Espécies Reativas de Oxigênio , Traumatismos da Medula Espinal/terapia , Antioxidantes/uso terapêutico , Transdução de SinaisRESUMO
Treatment of N-heterocyclic carbene (NHC) ligated germylidenylphosphinidene MsFluidtBu-GeP(NHCiPr) (where MsFluidtBu is a bulky hydrindacene substituent, and NHCiPr is 1,3-diisopropyl-4,5-dimethyl-imidazolin-2-ylidene) with mesityl azide and 4-tertbutylphenyl azide afforded NHC coordinated formal germanimidoyl-phosphinidenes, which represent the first compounds bearing both GeâN double bond and phosphinidene functionalities. Studies of the chemical properties revealed that the reactions preferred to occur at the GeâN double bond, which underwent [2 + 2] cycloadditions with CO2 and ethyl isocyanate, and coordinated with coinage metals through the nitrogen atom.
RESUMO
The reactions of chlorogermylene MsFluindtBu-GeCl 1, supported by a sterically encumbered hydrindacene ligand MsFluindtBu, with NaPCO(dioxane)2.5 and NaAsCO(18-c-6) in the presence of trimethylphosphine afforded trimethylphosphine-stabilized germylidenyl-phosphinidene 2 and -arsinidene 3, respectively. Structural and computational investigations reveal that the Ge-E' bond (E' = P and As) features a multiple-bond character. 2 and 3 exhibit diverse reactivity toward trimethylsilylacetylene and 4-tetrabutylphenylacetylene. Specifically, 2 underwent cycloadditions with both alkynes affording the first six-membered aromatic phosphagermabenzen-1-ylidenes 4 and 5, respectively, through the heavier isocyanide intermediate MsFluindtBu-PGe. In contrast, 3 could serve as a synthetic equivalent of heavier isocyanides and nitriles when treated with trimethylsilylacetylene and 4-tetrabutylphenylacetylene yielding arsagermene 6 and arsolylgermylene 7, respectively. The reaction mechanisms for the cycloadditions were investigated through density functional theory calculations. The reactivity studies highlight the potential of 2 and 3 in accessing heavy main-group element-containing heterocycles.
RESUMO
The wide use of cooperative missions using multiple unmanned platforms has made relative distance information an essential factor for cooperative positioning and formation control. Reducing the range error effectively in real time has become the main technical challenge. We present a new method to deal with ranging errors based on the distance increment (DI). The DI calculated by dead reckoning is used to smooth the DI obtained by the cooperative positioning, and the smoothed DI is then used to detect and estimate the non-line-of-sight (NLOS) error as well as to smooth the observed values containing random noise in the filtering process. Simulation and experimental results show that the relative accuracy of NLOS estimation is 8.17%, with the maximum random error reduced by 40.27%. The algorithm weakens the influence of NLOS and random errors on the measurement distance, thus improving the relative distance precision and enhancing the stability and reliability of cooperative positioning.
RESUMO
In the present paper, 60 whole wheat flour samples were prepared and corresponding NIR spectra were collected. After the determinations of calibration range, several spectral sub-regions containing calibration range and prepared for the correction using multiple scattering correction (MSC) were obtained in the whole spectral region firstly, and MSC correction based on different spectral sub-region followed subsequently. Corresponding spectral data were obtained from the fixed calibration range of the spectra corrected based on different regions. Several partial least squares regression (PLSR) calibration models for analyzing protein content of whole wheat flour were established based on corresponding spectral data, and according to the performance about the calibration coefficient and the root mean square error of cross validation (RMSEV) of every calibration, the effects of MSC pretreatment spectral region on PLSR calibration results were investigated and the pretreatment spectral regions were optimized by comparing theperformance of more calibration models. For the optimized calibration, the calibration coefficient and the RMSECV improved compared with the calibration established based on the spectral data corrected using MSC in the fixed region of calibration. The correlation coefficient can be raised from 0.96 to 0.98 and RMSECV can be decreased from 0.37% to 0.32%. The results show that the capability of MSC on correcting the spectral interference information of non-chemical absorption can be influenced by preprocessing spectral regions, the performance of calibration model can be improved by optimizing the MSC pretreatment spectral region, and the appropriate pretreatment spectral region is prerequisite to obtain the best calibration results while using MSC for near-infrared spectra analysis.
RESUMO
Gasification slag (GS) is rich in SiO2, Al2O3, and Fe2O3, and has excellent particle size gradation, which has the potential to be employed as an aggregate in the field of controlled low-strength material (CLSM). Nevertheless, the large-scale application of GS as the fine aggregate for the preparation of CLSM has been scarcely investigated. In the present work, the applicability of replacing part of coal gangue (CG) with gasification coarse slag (GCS) as fine aggregate for the preparation of CLSM was investigated. The results revealed that using GCS as a fine aggregate improved the flowability of CLSM, and increasing the GCS content from 0 to 50 wt% improved the flowability from 250.0 to 280.0 mm. The 28-day compressive strength of all CLSM conformed to the requirements of ACI Committee 229. Compared to the Blank group, the 7- and 28-day compressive strength of the CLSM increased by 23.07% and 26.80%, respectively, at a GCS content of 50 wt%. The increase in compressive strength was mainly due to the pore-filling and hydration-promoting effect of the GCS, which made the structure denser. The dense structure reduced the expansion rate, absorption, and porosity rate of CLSM and increased the wet density. The optimal process parameter was the addition of 10 wt% of GCS. The results of heavy metal ion leaching showed that the optimal sample GS10 leached all heavy metal ions in much less than the limit values of GB 8978-1996 and GB 5085.3-2007. The results will provide new ideas and technical approaches for the large-scale application of GCS as the fine aggregate in CLSM.
Assuntos
Metais Pesados , Dióxido de Silício , Porosidade , Força Compressiva , Tamanho da PartículaRESUMO
The utilization of lithium slag (LS), a solid waste generated during the production of lithium carbonate, poses challenges due to its high sulfur content. This study presents a novel approach to enhancing the value of LS by employing alkali fusion and hydrothermal synthesis techniques to produce zeolite A at low temperatures. The synthesis of high-purity and crystalline lithium-slag-based zeolite A (LSZ) at 60 °C is reported for the first time in this research. The phase, morphology, particle size, and structure of LSZ were characterized by XRD, SEM, TEM, N2 adsorption, and UV Raman spectroscopy, respectively. High-purity and crystalline zeolite A was successfully obtained under hydrothermal conditions of 60 °C, an NaOH concentration of 2.0 mol/L, and a hydrothermal time of 8 h. The samples synthesized at 60 °C exhibited better controllability and almost no byproduct of sodalite occurred compared to zeolite A synthesized at room temperature or conventional temperature (approximately 90 °C). Additionally, the growth mechanism of LSZ was elucidated, challenging the traditional understanding of utilization of lithium and enabling the synthesis of various zeolites at lower temperatures.
RESUMO
Aiming to enhance the comprehensive utilization of steel slag (SS), a solid waste-based binder consisting of SS, granulated blast furnace slag (BFS), and desulfurization gypsum (DG) was designed and prepared. This study investigated the reaction kinetics, phase assemblages, and microstructures of the prepared solid waste-based cementitious materials with various contents of SS through hydration heat, XRD, FT-IR, SEM, TG-DSC, and MIP methods. The synergistic reaction mechanism between SS and the other two wastes (BFS and DG) is revealed. The results show that increasing SS content in the solid waste-based binder raises the pH value of the freshly prepared pastes, advances the main hydration reaction, and shortens the setting time. With the optimal SS content of 20%, the best mechanical properties are achieved, with compressive strengths of 19.2 MPa at 3 d and 58.4 MPa at 28 d, respectively. However, as the SS content continues to increase beyond 20%, the hydration process of the prepared binder is delayed. The synergistic activation effects between SS and BFS with DG enable a large amount of ettringite (AFt) formation, guaranteeing early strength development. As the reaction progresses, more reaction products CSH and Aft are precipitated. They are interlacing and overlapping, jointly refining and densifying the material's microstructure and contributing to the long-term strength gain. This study provides a reference for designing and developing solid waste-based binders and deepens the insightful understanding of the hydration mechanism of the solid waste-based binder.
RESUMO
Phosphanorcaradienes are an appealing class of phosphorus compounds that can serve as synthons of transient phosphinidenes. However, the synthesis of such species is a formidable task owing to their intrinsic high reactivity. Herein we report straightforward synthesis, characterization and reactivity studies of a phosphanorcaradiene, in which one of the benzene rings in the flanking fluorenyl substituents is intramolecularly dearomatized through attachment to the phosphorus atom. It is facilely obtained by the reduction of phosphorus(III) dichloride precursor with potassium graphite. Despite being thermally robust, it acts as a synthetic equivalent of a transient phosphinidene. It reacts with trimethylphosphine and isonitrile to yield phosphanylidene-phosphorane and 1-phospha-3-azaallene, respectively. When it is treated with one and two molar equivalents of azide, iminophosphane and bis(imino)phosphane are isolated, respectively. Moreover, it is capable of activating ethylene and alkyne to afford [1 + 2] cycloaddition products, as well as oxidative cleavage of Si-H and N-H bonds to yield secondary phosphines. All the reactions proceed smoothly at room temperature without the presence of transition metals. The driving force for these reactions is most likely the high ring-constraint of the three-membered PC2 ring and recovery of the aromaticity of the benzene ring.
RESUMO
The fly ash-based geopolymer (FABG) containing slag has distinct advantages in field applications. In this work, given that the activator modulus is a significant parameter affecting the properties of FABG, the influence mechanism of activator modulus (SiO2/Na2O from 1.1 to 1.5) on the macro-mechanical properties and micro-structure composition of FABG containing slag is explored. According to the experimental results, the early product of FABG containing slag is mainly C-A-S-H gel, and N-(C)-A-S-H gel with high cross-linking degree is formed at a later stage. Both C-A-S-H and N-A-S-H gels are distinguished in reaction products by using 29Si NMR. The Si/Al ratio of N-A-S-H gel and C-A-S-H gel decreases with the increase of modulus, resulting in an increase of MCL in C-A-S-H. Appropriate activator modulus can effectively activate slag and fly ash to yield more gels and form a more uniform and dense micro-structure, resulting in a lower threshold pore size and macroporosity, and an associated increase of the material strength. Meanwhile, the gel amount has a positive effect on the strength development in the FABG.
Assuntos
Cinza de Carvão , Gastrópodes , Animais , Dióxido de Silício , GéisRESUMO
The solidification/stabilization of heavy metals and valuable component recovery from municipal solid waste incineration (MSWI) fly ash are of great significance for its safe disposal. In this study, MSWI fly ash was transformed into a new solid phase mainly composed of ettringite, achieving the solidification of excessive heavy metal Pb while obtaining a mixed solution of sodium chloride and potassium chloride with extremely low impurity content, which can be recovered by evaporation-crystallization respectively. The solidification mechanism of heavy metal Pb by ettringite was investigated through a combination of DFT calculations and experiments. The results indicate that a high conversion rate of calcium ions (99.68%), separation rate of chloride (95.99%), and conversion rate of heavy metal Pb (99.42%) can be achieved by controlling the ions ratio of the MSWI fly ash reaction system to n(Ca2+):n(Al3+):n(SO42-) = 6:2:3. DFT calculations show that the reaction pathway of the formation of a vacancy-Pb entering the vacancy at the Ca-2 site of ettringite is more likely to occur. The substitution of heavy metal Pb at the Ca-2 site leads to an increase in the unit cell volume, redistribution of charges, and a decrease in the thermal stability of the ettringite. The solidified body of ettringite presents a promising potential for application in cement-based materials due to its negligible risk of heavy metals leaching and low chloride content.
Assuntos
Metais Pesados , Eliminação de Resíduos , Cinza de Carvão , Resíduos Sólidos , Cloretos , Sais , Chumbo , Material Particulado , Carbono , Incineração , Metais Pesados/análiseRESUMO
OBJECTIVES: To examine the effects of foot dominance and body mass on foot plantar pressures in older women of regular, overweight, and obese weights. METHODS: 96 female adults were divided into regular-weight group (68.30 ± 4.19 yr), overweight group (69.88 ± 3.76 yr), and obesity group (68.47 ± 3.67 yr) based on their body mass index scores. Footscan® plantar pressure test system was used to assess the dynamic plantar pressures, and parameters were collected from risk analysis, foot axis analysis, single foot timing analysis, and pressure analysis. RESULTS: (1) The local risks of lateral forefoot and midfoot, the minimum and maximum subtalar joint angles, the flexibility of subtalar joint, foot flat phase, as well as the average pressures on toes, metatarsals,, midfoot, and lateral heel, with the peak pressures on toe 2-5, metatarsal 2, metatarsal 5, midfoot, and lateral heel had significant within-subject differences. (2) The phases of initial contact and foot flat, the average pressures on toe 2-5, metatarsals, midfoot, and heels, with the peak pressures on metatarsal 1-4, midfoot, and heels exhibited significant between-subjects differences. (3) There was an interaction effect of foot dominance and body mass index on the flexibility of subtalar joint. CONCLUSIONS: The non-dominant foot works better for stability, especially when touching on and off the ground. The dominant foot works better for propulsion but is more susceptible to pain, injury, and falls. For obese older women, the forefoot and midfoot are primarily responsible for maintaining stability, but the lateral midfoot and hindfoot are more prone to pain and discomfort.
RESUMO
Objectives: To investigate the associations of motor capacity of the lower extremity and mobility performance in daily physical activities with peak foot plantar pressures during walking among older women. Methods: Using the data collected among 58 community-dwelling older women (68.66 ± 3.85 years), Pearson correlation and multiple linear regression analyses were performed to analyze the associations of motor capacity of the lower extremity (the 30-s chair stand test, the timed one-leg stance with eyes closed, and the Fugl-Meyer assessment of lower extremity), mobility performance in daily physical activities (the average minutes of moderate to vigorous physical activity every day and the metabolic equivalents), and foot plantar pressures (peak force and peak pressure) with the age and body fat percentage as covariates. Results: (1) The motor capacity of the lower extremity has higher explanatory power for peak foot plantar pressures compared with the mobility performance in daily physical activities. (2) Higher body fat percentage was positively associated with peak force and pressure, while a lower score on the Fugl-Meyer assessment of lower extremity was negatively associated with both of them. (3) The metabolic equivalents were positively associated with the peak force, while the 30-s chair stand test was negatively associated with it. Conclusions: Mobility performance in daily physical activities can be significant predictors for peak foot plantar pressures among older women. The significant predictor variables include the Fugl-Meyer assessment of lower extremity, the 30-s chair stand test, and metabolic equivalents.
RESUMO
As a transmission medium and heating energy, microwave is widely favored due to its high efficiency, strong selectivity, and easy control. Here, the effects of different heating methods (conventional thermal induction (CI) and microwave induction (MI)) on the polymerization rate of polycarboxylate superplasticizer (PCE) were investigated. Compared with CI, MI significantly boosted the polymerization rate (by approximately 51 times) and markedly decreased the activation energy (Ea), from 46.83 kJ mol-1 to 35.07 kJ mol-1. The polar of the monomers and initiators in the PCE synthesis contributes to varying permittivities and loss factors under the microwave field, which are influenced by their concentration and reaction temperature. The insights gained from the microwave thermal effects and the micro-kinetics of the PCE polymerization system are able to propose theoretical underpinnings for the industrial-scale application of microwave induction polymerization, potentially steering the synthesis of polymer materials towards a more efficient and cleaner process.
RESUMO
Exercise is a potential treatment to improve sleep quality in middle-aged and elderly individuals. Understanding exercise-induced changes in functional plasticity of brain circuits that underlie improvements in sleep among middle-aged and older adults can inform treatment of sleep problems. The aim of the study is to identify the effects of a 12-week exercise program on sleep quality and brain functional connectivity in middle-aged and older adults with insomnia. The trial was registered with Chinese Clinical Trial Register (ChiCTR2000033652). We recruited 84 healthy sleepers and 85 individuals with insomnia. Participants with insomnia were assigned to receive either a 12-week exercise intervention or were placed in a 12-week waitlist control condition. Thirty-seven middle-aged and older adults in the exercise group and 30 in the waitlist group completed both baseline and week 12 assessments. We found that middle-aged and older adults with insomnia showed significantly worse sleep quality than healthy sleepers. At the brain circuit level, insomnia patients showed decreased connectivity in the widespread motor network. After exercise intervention, self-reported sleep was increased in the exercise group (P < 0.001) compared to that in the waitlist group. We also found increased functional connectivity of the motor network with the cerebellum in the exercise group (P < 0.001). Moreover, we observed significant correlations between improvement in subjective sleep indices and connectivity changes within the motor network. We highlight exercise-induced improvement in sleep quality and functional plasticity of the aging brain.
Assuntos
Distúrbios do Início e da Manutenção do Sono , Idoso , Humanos , Pessoa de Meia-Idade , Encéfalo/diagnóstico por imagem , Exercício Físico , Terapia por Exercício , Sono , Distúrbios do Início e da Manutenção do Sono/terapia , Resultado do TratamentoRESUMO
Coal gasification coarse slag (GFS) is a byproduct of coal gasification technology, which contains abundant amorphous aluminosilicate minerals. GFS has low carbon content, and its ground powder has potential pozzolanic activity, which can be used as a supplementary cementitious material (SCM) for cement. Herein, GFS-blended cement was studied in terms of ion dissolution characteristics, initial hydration kinetics, hydration reaction process, microstructure evolution process, and the development of the mechanical strength of their paste and mortar. Enhanced alkalinity and elevated temperature could increase the pozzolanic activity of GFS powder. The specific surface area of GFS powder and its content did not change the reaction mechanism of cement. The hydration process was divided into three stages: crystal nucleation and growth (NG), phase boundary reaction (I), and diffusion reaction (D). A higher specific surface area of the GFS powder could improve the chemical kinetic process of the cement system. The degree of reaction of GFS powder and blended cement had a positive correlation. A low GFS powder content (10%) with a high specific surface area (463 m2/kg) showed the best activation in cement as well as improving the late mechanical properties of cement. The results show GFS powder with low carbon content has the application value as SCM.
RESUMO
Isolation of triplet pnictinidenes, which bear two unpaired electrons at the pnictogen centers, has long been a great challenge due to their intrinsic high reactivity. Herein, we report the syntheses and characterizations of two bismuthinidenes MsFluindtBu-Bi (3) and MsFluind*-Bi (4) stabilized by sterically encumbered hydrindacene ligands. They were facilely prepared through reductions of the corresponding dichloride precursors with 2 molar equivalents of potassium graphite. The structural analyses revealed that 3 and 4 contain a one-coordinate bismuth atom supported by a Bi-C single σ bond. As a consequence, the remaining two Bi 6p orbitals are nearly degenerate, and 3 and 4 possess triplet ground states. Experimental characterizations with multinuclear magnetic resonance, magnetometry and near infrared spectroscopy coupled to wavefunction based ab initio calculations concurred to evidence that there exist giant and positive zero field splittings (>4300 cm-1) in their S = 1 ground states. Hence even at room temperature the systems almost exclusively populate the lowest-energy nonmagnetic Ms = 0 level, which renders them seemingly diamagnetic.