Polyvinyl Chloride-Based Luminescent Downshifting Film with High Flame Retardancy and Excellent UV Resistance for Silicon Solar Cells.

Solar power generation, as a clean energy source, has significant potential for development. This work reports the recent efforts to address the challenge of low power conversion efficiency in photovoltaic devices by proposing the fabrication of a luminescence downshifting layer using polyvinyl chloride (PVC) with added fluorescent dots to enhance light utilization. A photoluminescent microsphere (HCPAM) is synthesized by cross-linking hexachlorocyclotriphosphazene, 2-iminobenzimidazoline, and polyethyleneimine. Low addition of HCPAM can improve the fire safety of PVC films, raising the limiting oxygen index of PVC to 32.4% and reducing the total heat release and smoke production rate values by 14.5% and 42.9%, respectively. Additionally, modified PVC film remains a transparency of 88% and shows down-conversion light properties. When the PVC+1%HCPAM film is applied to the solar cell, the short-circuit current density increases from 42.3 to 43.8 mA cm-2, resulting in a 7.0% enhancement in power conversion efficiency. HCPAM also effectively delays the photooxidative aging of PVC, particularly at a 3% content, maintaining the surface morphology and optical properties of PVC samples during ultraviolet aging. This study offers an innovative strategy to enhance the fire and UV-resistant performance of PVC films and expand their applications in protecting and efficiently utilizing photovoltaic devices.

Mesoscopic model and flow characteristics of sequential double chord grid wires.

The crushing of beneficiation plants will produce a large amount of dust containing hot air flow, seriously polluting the atmospheric environment if discharged directly without treatment. The key to control is to dust and cool the exhaust. In order to improve the efficiency of the device, the airflow disturbance between the chord grid should be enhanced to promote the collision probability between the dust and the droplet and the surface of the chord grid. Based on the above analysis, the lattice Boltzmann method (LBM) is used to simplify the chord grid wire into an infinitely long cylinder structure, and a mesoscopic model is established to explore the flow characteristics of the airflow through the wet chord grid wires. The results show that there is a critical flow direction spacing ratio of L/D = 2.5; when the critical spacing is exceeded, vortex shedding occurs on the upstream cylinder, the boundary layer is separated, and the time-average drag coefficient Cd-M on the cylinder surface changes sharply, when the spacing ratio is less than this critical ratio, the downstream cylinder is immersed in the near wake region of the upstream cylinder. The gap flows smoothly from the downstream cylinder gap. The sequential double-chord grid wires show the flow characteristics around a single blunt body, and the time-average drag coefficient of the cylinder surface changes smoothly. According to the research results, the wet chord grid wires purification and heat dissipation device is applied to the beneficiation plants. The parameter design is carried out to make the flow direction spacing ratio (FDSR) L/D ≥ 3.5 to ensure that the development and migration of vortices in the wake of the upstream cylinder are not inhibited by the downstream cylinder. The longitudinal spacing ratio (LSR) is 1.35≤W/D ≤ 2.5 to ensure that the velocity ratio behind the upstream cylinder is u/u0 ≥ 0.5 to promote the mixing of the fluid. The test results show that when the concentration of exhaust dust in the beneficiation plants is 38.27 mg/m3, the dust concentration of outlet air will be reduced to 0.39 mg/m3 after the wet chord grid wires purification and heat treatment, the total dust removal efficiency is 98.98%, the inlet air temperature is 32 °C, and the outlet air temperature is about 27 °C. The maximum temperature drop is 5 °C, and the air quality meets environmental emission standards.

Preparation of astaxanthin-loaded composite micelles with coaxial electrospray technology for enhanced oral bioavailability and improved antioxidation capability.

BACKGROUND: Astaxanthin (AST) is approved by the US Food and Drug Administration (FDA) as a safe dietary supplement for humans. As a potent lipid-soluble keto-carotenoid, it is widely used in food, cosmetics, and the pharmaceutical industry. However, its low solubility limits its powerful biological activity and its application in these fields. This study aims to develop a delivery system to address the low solubility and bioavailability of AST and to enhance its antioxidant capacity. RESULTS: Astaxanthin-loaded composite micelles were successfully prepared via coaxial electrospray technology. Astaxanthin existed in the amorphous state in the electro-sprayed formulation with an approximate particle size of 186.28 nm and with a polydispersity index of 0.243. In this delivery system, Soluplus and copovidone (PVPVA 64) were the main polymeric matrix for AST, which then released the drug upon contact with aqueous media, resulting in an overall increase in drug solubility and a release rate of 94.08%. Meanwhile, lecithin, and Polyethylene glycol-grafted Chitosan (PEG-g-CS) could support the absorption of AST in the gastrointestinal tract, assisting transmembrane transport. The relative bioavailability reached about 308.33% and the reactive oxygen species (ROS) scavenging efficiency of the formulation was 44.10%, which was 1.57 times higher than that of free astaxanthin (28.10%) when both were at the same concentration level based on astaxanthin. CONCLUSION: Coaxial electrospray could be applied to prepare a composite micelles system for the delivery of poorly water-soluble active ingredients in functional food, cosmetics, and medicine. © 2023 Society of Chemical Industry.

Polyfluorinated Organic Diammonium Induced Lead Iodide Arrangement for Efficient Two-Step-Processed Perovskite Solar Cells.

The inefficient conversion of lead iodide to perovskite has become one of the major challenges in further improving the performance of perovskite solar cells fabricated by the two-step method. Herein, the discontinuous lead iodide layer realized by introduction of a polyfluorinated organic diammonium salt, octafluoro-([1,1'-biphenyl]-4,4'-diyl)-dimethanaminium (OFPP) iodide which does not form low-dimensional perovskites, can enable the satisfactory conversion of lead iodide into perovskite, leading to meliorated crystallinity and enlarged grains in the OFPP modulated perovskite (OFPP-PVK) film. Combined with the effective defect passivation, the OFPP-PVK films show enhanced charge mobility and suppressed charge recombination. Accordingly, the OFPP-based perovskite solar cells exhibit a champion efficiency of 24.76 % with better device stability. Moreover, a superior efficiency of 21.04 % was achieved in a large-area perovskite module (100 cm2). Our work provides a unique insight into the function of organic diammonium additive in boosting photovoltaic performance.

Enhanced oral bioavailability of capsaicin-loaded microencapsulation complex via electrospray technology: Preparation, in vitro and in vivo evaluation.

The purpose of this work was to fabricate the microencapsulation of capsaicin using electrospray technology and polyvinylpyrrolidone (PVP) K30 as a carrier. The morphological characteristics of capsaicin-PVP electrosprayed microencapsulation complex under different processing parameters were observed by scanning electron microscope (SEM), while the best process was determined, wherein it comprised of 10 KV (voltage), 0.8 ml·h-1 (solution flow rate), 0.9 mm (the inner diameter of the needle), and 10 cm (receiving distance). The X-ray diffraction results of the electrosprayed complex showed that capsaicin was present in the carrier in an amorphous form. The drug release properties of capsaicin powder and electrosprayed complex in different media were investigated. The results showed that in vitro release rates of the capsaicin complex in different media were much higher than that of capsaicin powder, with correspondingly improved bioavailability, defined by intravenous and oral dosing in rats in vivo, for the electrosprayed complex compared to that of capsacin powder. The dose absorbed of the electrosprayed complex was 2.2-fold that of the capsaicin powder. In short, electrospray technology can be used to prepare capsaicin-loaded electrosprayed microencapsulation complex. This technique can improve the solubility and bioavailability of capsaicin, and provide a new idea for the solubilization of other insoluble drugs.

Preparation and evaluation of astaxanthin-loaded 2-hydroxypropyl-beta-cyclodextrin and Soluplus® nanoparticles based on electrospray technology.

BACKGROUND: Astaxanthin is a type of food-derived active ingredient with antioxidant, antidiabetic and non-toxicity functions, but its poor solubility and low bioavailability hinder further application in food industry. In the present study, through inclusion technologies, micellar solubilization and electrospray techniques, we prepared astaxanthin nanoparticles before optimizing the formulation to regulate the physical and chemical properties of micelles. We accomplished the preparation of astaxanthin nanoparticle delivery system based on single needle electrospray technology through use of 2-hydroxypropyl-ß-cyclodextrin and Soluplus® to improveme the release behavior of the nanocarrier. RESULTS: Through this experiment, we successfully prepared astaxanthin nanoparticles with a particle size of approximately 80 nm, which was further verified with scanning electron microscopy and transmission electron microscopy. Furthermore, the encapsulation of astaxanthin molecules into the carrier nanoparticles was verified via the results of attenuated total reflectance intensity and X-ray powder diffraction techniques. The in vitro release behavior of astaxanthin nanoparticles was different in media that contained 0.5% Tween 80 (pH 1.2, 4.5 and 6.8) buffer solution and distilled water. Also, we carried out a pharmacokinetic study of astaxanthin nanoparticles, in which it was observed that astaxanthin nanoparticle showed an effect of immediate release and significant improved bioavailability. CONCLUSION: 2-hydroxypropyl-ß-cyclodextrin and Soluplus® were used in the present study as a hydrophilic nanocarrier that could provide a simple way of encapsulating natural function food with repsect to improving the solubility and bioavailability of poorly water-soluble ingredients. © 2023 Society of Chemical Industry.

The Assembly and Jamming of Nanoparticle Surfactants at Liquid-Liquid Interfaces.

Using the interactions between nanoparticles (NPs) and polymeric ligands to generate nanoparticle surfactants (NPSs) at the liquid-liquid interface, the binding energy of the NP to the interface can be significantly increased, irreversibly binding the NPSs to the interface. By designing a simplified NPS model, where the NP size can be precisely controlled and the characteristic fluorescence of the NPs be used as a direct probe of their spatial distribution, we provide new insights into the attachment mechanism of NPSs at the liquid-liquid interface. We find that the binding energy of NPSs to the interface can be reduced by competitive ligands, resulting in the dissociation and disassembly of NPSs at the interface, and allowing the construction of responsive, reconfigurable all-liquid systems. Smaller NPSs that are loosely packed (unjammed) and irreversibly bound to the interface can be displaced by larger NPSs, giving rise to a size-dependent assembly of NPSs at the interface. However, when the smaller size NPSs are densely packed and jam at the interface, the size-dependent assembly of NPSs at the interface can be completely suppressed.

Effects of Acupuncture Treatment on Lower Limb Spasticity in Patients Following Hemorrhagic Stroke: A Pilot Study.

BACKGROUND AND PURPOSE: Lower limb spasticity is often a significant problem in stoke rehabilitation. The purpose of this study was to investigate the effects of acupuncture treatment on lower limb spasticity in patients following hemorrhagic stroke. METHODS: Fifty-nine patients following hemorrhagic stroke were randomized to receive acupuncture treatment combined with conventional treatment (treatment group [TG]) or conventional treatment only (control group [CG]). Acupuncture treatments were given in 24 sessions over 4 weeks. Blinded evaluation was based on Modified Ashworth Scale (MAS), short intracortical inhibition (SICI), and Hmax/Mmax ratio as the primary outcomes. In addition, Fugl-Meyer Assessment (FMA), Barthel Index (BI), motor evoked potential (MEP) and surface integrated electromyogram (IEMG) were employed as the secondary outcomes. All the evaluations were performed at 14 and 28 days after the start of the treatment. RESULTS: Compared with the CG, the TG showed a significantly greater over-time decrease in MAS for knee (p = 0.022) and ankle (p = 0.017), SICI (p = 0.000) and Hmax/Mmax ratio (p = 0.000). In all patients of TG, we found a greater improvement in lower-limb FMA and MEP but not in BI. IEMG show that TG obtained a greater reduction in spastic agonist muscles and a greater enhancement in spastic antagonist muscles. A significant correlation between a greater decrease in ankle MAS and a greater increase in SICI for spastic muscles was found (r = 0.390, p = 0.002). CONCLUSIONS: Acupuncture could improve the lower limb spasticity and motor function, thus providing a safe and economical approach for treating stroke patients. The potential mechanism underpinning the greater improvement may be attributed to a reshape of corticospinal plasticity induced by acupuncture.

Self-Assembly of MXene-Surfactants at Liquid-Liquid Interfaces: From Structured Liquids to 3D Aerogels.

2D transition metal carbides and nitrides (MXenes), a class of emerging nanomaterials with intriguing properties, have attracted significant attention in recent years. However, owing to the highly hydrophilic nature of MXene nanosheets, assembly strategies of MXene at liquid-liquid interfaces have been very limited and challenging. Herein, through the cooperative assembly of MXene and amine-functionalized polyhedral oligomeric silsesquioxane at the oil-water interface, we report the formation, assembly, and jamming of a new type MXene-based Janus-like nanoparticle surfactants, termed MXene-surfactants (MXSs), which can significantly enhance the interfacial activity of MXene nanosheets. More importantly, this simple assembly strategy opens a new platform for the fabrication of functional MXene assemblies from mesoscale (e.g., structured liquids) to macroscale (e.g., aerogels), that can be used for a range of applications, including nanocomposites, electronic devices, and all-liquid microfluidic devices.

Large Hexosomes from Emulsion Droplets: Particle Shape and Mesostructure Control.

Soft, rotationally symmetric particles of dispersed hexagonal liquid crystalline phase are produced using a method previously developed for cubosome microparticle production. The technique forms hexosome particles via removal of ethanol from emulsion droplets containing monoolein, water, and one of the various hydrophobic molecules: vitamin E, hexadecane, oleic acid, cyclohexane, or divinylbenzene. The unique rotational symmetry of the particles is characterized by optical microscopy and small-angle X-ray scattering to link particle phase, shape, and structure to composition. Rheology of the soft particles can be varied independently of shape, enabling control of transport, deformation, and biological response by controlling composition and molecular structure of the additives. The direct observations of formation, and the resultant hexosome shapes, link the particle-scale and mesoscale properties of these novel self-assembled particles and broaden their applications. The micron-scale hexosomes provide a route to understanding the effects of particle size, crystallization rate, and rheology on the production of soft particles with liquid crystalline structure and unique shape and symmetry.

Soft polyhedral particles based on cubic liquid crystalline emulsion droplets.

Soft polyhedral particles based on variations of the cubic symmetry group are produced from a precursor emulsion by extracting solvent to grow facets on the droplets. The droplets transform into liquid crystals with solid-like rheology and controlled size and shape. Small-angle X-ray scattering confirms a bicontinuous cubic liquid crystalline phase forms from aqueous glycerol monoolein and is responsible for the particle faceting observed. Different polyhedra are produced by varying face growth rates through control of precursor droplet size, system temperature, and solubilization and adsorption of guest molecules. More exotic faceted shapes can be formed by the soft particles by applying asymmetric solvent removal gradients and by deforming the precursor droplets into, for example, ellipsoids before crystallization. The method is a powerful means to produce soft polyhedra, using continuous microfluidic or other approaches, or to act as templates for hard polyhedral particle synthesis.

Hydrogels Triggered by Metal Ions as Precursors of Network CuS for DNA Detection.

The gelation behavior of lithocholate (LC(-) ) with different metal ions in water was investigated. The microstructures of hydrogels were determined to be three-dimensional (3D) networks of fibrous aggregates. The formation of fibrils was speculated to be mainly driven by the coordination between carboxylate of LC(-) and metal ions, accompanied by the assistance of noncovalent interactions such as electrostatic and hydrophobic interactions. The hydrogels, which can maintain the mechanical strength at higher temperature, exhibit thermal stability. Their gelation capability was enhanced with the increase in acidity. The hydrogels of LC(-) and Cu(2+) mixtures served as the precursors for producing network nanostructures of CuS nanoparticles. These new CuS networks exhibit high fluorescence quenching ability and can act as an effective fluorescent sensing platform for ssDNA detection.

Sponge phase producing porous CeO2 for catalytic oxidation of CO.

The aggregation behavior of mixtures of the alkaline amino acid L-Arginine (L-Arg) and bis(2-ethylhexyl)phosphoric acid (DEHPA) in water was studied in detail. At a fixed L-Arg concentration, a phase sequence of micellar phase (L1 phase), vesicle phase (Lαv phase), planar lamellar phase (Lαl phase), and sponge phase (L3 phase) was obtained with increasing DEHPA concentration due to changes in the packing parameter. The phase transition of the lamellar structures was determined by freeze-fracture TEM and (2)H NMR spectroscopy. Rheological measurements reflected the phase transition through significant variations of both the elastic modulus and the viscous modulus. Porous CeO2 materials were produced by utilizing the L3 phase as template, and the porous CeO2 exhibited excellent catalytic oxidation activity toward CO due to its high surface area, which provides more active sites for CO conversion.

Alkylphenyl substituted naphthodithiophene: a new building unit with conjugated side chains for semiconducting materials.

In this article, a versatile 2-D conjugated polymer, PNDTP-DPP, containing alkylphenyl substituted naphthodithiophene is synthesized and characterized. PNDTP-DPP exhibits good solubility and crystallinity with a π-π stacking distance of ≈3.7 Å. Investigation of polymer solar cells (PSCs) and organic field-effect transistors (OFET) demonstrates a promising power conversion efficiency (PCE) of 4.11% and a high hole mobility of up to 0.86 cm(2) V(-1) s(-1) , so this is one of the few examples of versatile polymers that show both good field-effect mobility and PCE.

Recursive Deformable Pyramid Network for Unsupervised Medical Image Registration.

Complicated deformation problems are frequently encountered in medical image registration tasks. Although various advanced registration models have been proposed, accurate and efficient deformable registration remains challenging, especially for handling the large volumetric deformations. To this end, we propose a novel recursive deformable pyramid (RDP) network for unsupervised non-rigid registration. Our network is a pure convolutional pyramid, which fully utilizes the advantages of the pyramid structure itself, but does not rely on any high-weight attentions or transformers. In particular, our network leverages a step-by-step recursion strategy with the integration of high-level semantics to predict the deformation field from coarse to fine, while ensuring the rationality of the deformation field. Meanwhile, due to the recursive pyramid strategy, our network can effectively attain deformable registration without separate affine pre-alignment. We compare the RDP network with several existing registration methods on three public brain magnetic resonance imaging (MRI) datasets, including LPBA, Mindboggle and IXI. Experimental results demonstrate our network consistently outcompetes state of the art with respect to the metrics of Dice score, average symmetric surface distance, Hausdorff distance, and Jacobian. Even for the data without the affine pre-alignment, our network maintains satisfactory performance on compensating for the large deformation. The code is publicly available at https://github.com/ZAX130/RDP.

Water-Oil Interfacial Synthesis of Two-Dimensional Colloidal Lead-Iodide Perovskites with Enhanced Efficiency and Stability.

Two-dimensional Ruddlesden-Popper perovskites L2PbI4 (L = alkylammonium cation) (RPPs) have attracted significant attention due to their unique excitonic characteristics. However, their ultrafast reaction dynamics exacerbates the structural distortion of the inorganic framework, leading to severe deterioration in photoluminescence. Here, we propose a water-oil interfacial synthesis approach to achieve controlled growth of the RPPs nanosheets. By segregating Pb and I precursors in two immiscible solvents, the nucleation and growth of RPPs are prolonged to the minute level. L2PbI4 nanosheets terminated with various alkylammonium are synthesized, and the factors influencing the growth kinetics of RPPs nanosheets are investigated. The resulting (PEA)2PbI4 nanosheets exhibit a 3.6-time enhancement in quantum efficiency and 3.2-time improvement photostability compared to those synthesized using the classical recrystallization method. A white light-emitting diode based on (HDA)2PbI4 nanosheets is fabricated, achieving a color gamut of 119.7% of the NTSC display standards. This innovative approach offers a new method for the controlled growth of 2D RPPs with improved optical quality and stability.

Tethered Small-Molecule Acceptor Refines Hierarchical Morphology in Ternary Polymer Solar Cells: Enhanced Stability and 19% Efficiency.

Polymer solar cells (PSCs) are promising for efficient solar energy conversion, but achieving high efficiency and device longevity within a bulk-heterojunction (BHJ) structure remains a challenge. Traditional small-molecule acceptors (SMAs) in the BHJ blend show thermodynamic instability affecting the morphology. In contrast, tethered SMAs exhibit higher glass transition temperatures, mitigating these concerns. Yet, they might not integrate well with polymer donors, causing pronounced phase separation and overpurification of mixed domains. Herein, a novel ternary device is introduced that uses DY-P2EH, a tethered dimeric SMA with conjugated side-chains as host acceptor, and BTP-ec9, a monomeric SMA as secondary acceptor, which respectively possess hypomiscibility and hypermiscibility with the polymer donor PM6. This unique combination affords a parallel-connected ternary BHJ blend, leading to a hierarchical and stable morphology. The ternary device achieves a remarkable fill factor of 80.61% and an impressive power conversion efficiency of 19.09%. Furthermore, the ternary device exhibits exceptional stability, retaining over 85% of its initial efficiency even after enduring 1100 h of thermal stress at 85 °C. These findings highlight the potential advantage of tethered SMAs in the design of ternary devices with a refined hierarchical structure for more efficient and durable solar energy conversion technologies.

Low temperature, solution-processed alumina for organic solar cells.

In this work, we have reported for the first time a facile route for developing solution-processed Al2O3 film at a greatly reduced processing temperature and studied its applications in producing inverted polymer solar cells (PSCs). These PSCs using Al2O3 thin film as the electron-extraction layer demonstrated improved diode characteristics and achieved a 20% higher power conversion efficiency than devices using the conventional ZnO buffer layer. Furthermore, the low temperature processing of the Al2O3 film makes it compatible with fabrication of flexible organic electronic devices based on plastic substrates.

Constructing lignin based nanoparticles towards flame retardant thermoplastic polyurethane composites with improved mechanical and oxidation resistant properties.

A multifunctional lignin derivative nanoparticle (C-P-Lignin) was synthesized by grafting phenyl dichloro sphosphineoxid and 1, 4-dimethoxyacetylene stepwise on the lignin, then it was applied to prepare the thermoplastic polyurethane (TPU) composite with improved mechanical properties, oxidation resistance, and flame retardancy. The tensile strength, the elongation at break, and the toughness of the TPU/2C-P-Lignin sample reached 28.3 MPa, 941 %, and 139.0 MJ/m2 respectively, which were increased by 39.0 %, 3.4 %, and 33.9 % respectively compared with that of the control TPU sample. The anti-fatigue property was also improved. More importantly, the mechanism of the improved mechanical properties was also calculated and simulated by FTIR and Materials Studio software. The TPU/2C-P-Lignin sample exhibited superior oxidation resistance during the process of photoaging and thermal oxidative aging. Furthermore, the peak heat release rate and the smoke production rate for theTPU/2C-P-Lignin sample was reduced by 50.0 % and 53.8 % compared with that of the control TPU. The reason was that the C-P-Lignin is conducive to the formation of uniformly distributed carbon layers. It is expected that this work can provide a new method for expanding the utilization of waste wood as a multifunctional lignin-based filler to improve fire safety and extend the service life of TPU polymers.

A biomimetic structured bio-based flame retardant coating on flexible polyurethane foam with low smoke release and antibacterial ability.

Flexible polyurethane foam (FPUF) is widely used in our life, but it is inherent flammable. The demand for environmental-friendly multi-functional FPUF has been increasing rapidly in the last decade. In this work, a novel bio-based flame retardant coating was constructed by chemically reacting sodium alginate (OSA) and polydopamine (PDA) on the FPUF, followed by depositing nanorod-like ß-FeOOH molecules through complexation reaction to form a biomimetic structure. The limiting oxygen index of the coated FPUF samples reached 25.5%. The peak heat release rate was reduced by 45.0%, and the smoke density of the coated sample was decreased by 69.1% compared to that of the control FPUF sample. It was proposed that the OSA-PDA-ß-FeOOH decomposed during combustion to promote the formation of compact crosslinked char and released inert gases to dilute the combustible gases, and the ß-FeOOH transferred to Fe2O3 to settled the smoke particles reducing the smoke release. Furthermore, the coating with shark skin like structure endowed FPUF antibacterial ability because of its good superoleophobicity underwater. This work provided a novel strategy to construct a biomimetic multifunctional coating on the FPUF.