RESUMO
BACKGROUND: Fournier's gangrene (FG), a urological emergency with high mortality, is an infectious necrotizing fasciitis of the perineal and genital regions. The majority of FG is caused by polymicrobial organisms involving mixed aerobes and anaerobes but rarely reveals Actinomyces species. CASE PRESENTATION: We report a healthy 67-year-old Asian male who presented with rapidly progressive painful swelling of the scrotum. Clinically diagnosed with FG, the patient underwent an emergency radical debridement, followed by broad-spectrum antibiotics and negative pressure wound therapy. The identification of the causative microorganisms showed Actinomyces turicensis and the antibiotic treatment was adjusted accordingly. After wound bed preparation, we took split-thickness skin grafts to cover the scrotal wound. Active management to minimize faecal contamination was applied throughout the whole course of treatment and repair. The patient was satisfied with the outcome. This was an extremely rare case of A. turicensis as the main causative pathogen of FG. CONCLUSIONS: FG due to Actinomyces species is rarely reported, but we should still consider this pathogenic microorganism that has long been neglected.
Assuntos
Actinomycetaceae/isolamento & purificação , Infecções por Actinomycetales/complicações , Gangrena de Fournier/microbiologia , Escroto/patologia , Infecções por Actinomycetales/tratamento farmacológico , Idoso , Antibacterianos/uso terapêutico , Desbridamento , Gangrena de Fournier/cirurgia , Humanos , Masculino , Escroto/microbiologia , Escroto/cirurgiaRESUMO
BACKGROUND: Although silicone rubber (SR) implants are most commonly used and effective for soft-tissue augmentation, they still have been implicated in many adverse reactions. To overcome this problem, a novel composite beta-tricalcium phosphate/silicone rubber (beta-TCP/SR) was prepared by adding beta-TCP into a SR matrix. This study was to evaluate its application potential by investigating the mechanical properties and biocompatibility of beta-TCP/SR. METHODS: Mechanical properties, including Shore A hardness and tensile strength, were evaluated with 3-mm-thick samples and a universal testing machine. Cytocompatibility tests were conducted in vitro using 0.2-mm-thick beta-TCP/SR samples by seeding fibroblasts onto different samples. Soft-tissue response to beta-TCP/SR and pull-out measurements were investigated 4 weeks and 24 weeks after implantation. RESULTS: The main mechanical properties were all significantly changed after mixing beta-TCP into the SR matrix, except for tearing strength. The cytocompatibility test showed enhanced adhesion and proliferation of fibroblasts onto beta-TCP/SR. Fibrous tissue ingrowth after resorption of beta-TCP was observed by in vivo histologic analysis. The peri-implant capsules in the beta-TCP/SR group were thinner than in the SR group 24 weeks after implantation. In a 24-week test, the maximum force required to pull out the beta-TCP/SR sheet was about six times greater than that needed for SR. CONCLUSION: Although some mechanical properties were significantly changed, the results of the cytocompatibility test and in vivo animal study still suggest that beta-TCP/SR may be more suitable as a soft-tissue implant than SR and has the potential to be used in plastic surgery.
Assuntos
Fosfatos de Cálcio/farmacologia , Teste de Materiais/métodos , Próteses e Implantes , Elastômeros de Silicone/farmacologia , Resistência à Tração , Análise de Variância , Animais , Materiais Biocompatíveis/farmacologia , Fenômenos Biomecânicos , Força Compressiva , Modelos Animais de Doenças , Fibroblastos/citologia , Fibroblastos/patologia , Imuno-Histoquímica , Masculino , Probabilidade , Desenho de Prótese , Implantação de Prótese , Coelhos , Distribuição Aleatória , Ratos , Ratos Wistar , Cirurgia Plástica/métodosRESUMO
OBJECTIVE: The controversy remains as to whether immediate prosthetic breast reconstruction with postmastectomy radiation therapy (PMRT) is associated with acceptable complications and aesthetic outcomes. The aim of this meta-analysis was to provide a pooled analysis of comparative clinical studies that evaluated breast cancer patients who were treated with a mastectomy and an immediate prosthetic breast reconstruction to compare the complications and satisfaction of those who underwent or did not undergo PMRT. METHODS: According to the recommendations of the Cochrane Collaboration, we established a rigorous study protocol. We performed a systematic electronic search of the PubMed and Embase databases to identify articles for inclusion in our meta-analysis. Reconstruction failure, overall complications, capsular contracture, and patient satisfaction were analyzed individually. RESULTS: Fifteen controlled trials were included, comprising 5314 patients (1069 PMRT vs 4245 non-PMRT). Primary outcomes revealed a statistically significant increase in overall complications [odds ratio (OR) 3.45; 95% confidence interval (95% CI) 2.62-4.54; Pâ<â.00001], reconstruction failure (OR: 2.59; 95% CI 1.46-4.62; Pâ=â.001), and capsular contracture (OR: 5.26, 95% CI: 2.73-10.13, Pâ<â.00001) after receiving PMRT. CONCLUSION: Our review found that PMRT for patients who underwent immediate implant-based breast reconstruction led to higher risks of reconstruction failure, overall complications, and capsular contracture. However, it is still the standard adjuvant therapy for mastectomy patients who have opted for immediate implant-based breast reconstruction.
Assuntos
Implante Mamário/métodos , Neoplasias da Mama/radioterapia , Radioterapia Adjuvante/métodos , Neoplasias da Mama/cirurgia , Feminino , Humanos , Mastectomia/métodos , Resultado do TratamentoRESUMO
Medical device implants are drawing increasing amounts of interest from modern medical practitioners. However, this attention is not evenly spread across all such devices; most of these implantable devices can cause adverse reactions such as inflammation, fibrosis, thrombosis, and infection. In this work, the biocompatibility of silicone rubber (SR) was improved through carbon (C) ion implantation. Scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) results confirmed that these newly generated carbon-implanted silicone rubbers (C-SRs) had large, irregular peaks and deep valleys on their surfaces. The water contact angle of the SR surface decreased significantly after C ion implantation. C ion implantation also changed the surface charge distribution, silicone oxygen rate, and chemical-element distribution of SR to favor cell attachment. The dermal fibroblasts cultured on the surface C-SR grew faster and showed more typical fibroblastic shapes. The expression levels of major adhesion proteins, including talin-1, zyxin, and vinculin, were significantly higher in dermal fibroblasts cultured on C-SR coated plates than in dermal fibroblasts cultured on SR. Those same dermal fibroblasts on C-SRs showed more pronounced adhesion and migration abilities. Osteopontin (OPN), a critical extracellular matrix (ECM) protein, was up-regulated and secreted from dermal fibroblasts cultured on C-SR. Matrix metalloproteinase-9 (MMP-9) activity was also increased. These cells were highly mobile and were able to adhere to surfaces, but these abilities were inhibited by the monoclonal antibody against OPN, or by shRNA-mediated MMP-9 knockdown. Together, these results suggest that C ion implantation significantly improves SR biocompatibility, and that OPN is important to promote cell adhesion to the C-SR surface.
Assuntos
Carbono/química , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Osteopontina/metabolismo , Elastômeros de Silicone/química , Elastômeros de Silicone/farmacologia , Adesão Celular/efeitos dos fármacos , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Fibroblastos/citologia , Fibroblastos/efeitos dos fármacos , Regulação da Expressão Gênica/efeitos dos fármacos , Humanos , Metaloproteinase 9 da Matriz/metabolismo , Relação Estrutura-Atividade , Propriedades de SuperfícieRESUMO
Silicone rubber (SR) is a common soft tissue filler material used in plastic surgery. However, it presents a poor surface for cellular adhesion and suffers from poor biocompatibility. In contrast, hydroxyapatite (HA), a prominent component of animal bone and teeth, can promote improved cell compatibility, but HA is an unsuitable filler material because of the brittleness in mechanism. In this study, using a simple and economical method, two sizes of HA was applied to coat on SR to counteract the poor biocompatibility of SR. Surface and mechanical properties of SR and HA/SRs confirmed that coating with HA changes the surface topology and material properties. Analysis of cell proliferation and adhesion as well as measurement of the expression levels of adhesion related molecules indicated that HA-coated SR significantly increased cell compatibility. Furthermore, mass spectrometry proved that the biocompatibility improvement may be related to elongation factor 1-beta (EF1ß)/γ-actin adjusted cytoskeletal rearrangement.
Assuntos
Actinas/metabolismo , Adesão Celular/fisiologia , Durapatita/química , Fator 1 de Elongação de Peptídeos/metabolismo , Elastômeros de Silicone/química , Actinas/biossíntese , Moléculas de Adesão Celular/genética , Moléculas de Adesão Celular/metabolismo , Proliferação de Células/fisiologia , Células Cultivadas , Materiais Revestidos Biocompatíveis/química , Citoesqueleto/metabolismo , Fibroblastos/citologia , Humanos , Teste de Materiais/métodos , Microscopia Eletrônica de Varredura , Fator 1 de Elongação de Peptídeos/biossíntese , Propriedades de SuperfícieRESUMO
BACKGROUND: Recent studies in animal models suggest that serum amyloid P (SAP) can affect burn wound healing. However, the role of SAP in a clinical setting remains unknown. METHODS: We enrolled 88 patients with third degree burn wounds. All the patients were candidates for auto-skin graft procedure using stamp skin graft. The complete graft healing time and the number of survived grafts were recorded. Serum SAP levels were assessed 1 day before operation. RESULTS: There was no significant difference in SAP level between controls and patients. There were no significant differences noted among the patients with different burn surface area. However, when the patients in each group were stratified by SAP levels, the mean complete healing time of grafted wound and the mean numbers of survived skin grafts were significantly different. Spearman's analyses showed that the serum SAP levels negatively correlated with the complete wound healing time and mean numbers of survived skin grafts. Logistic regression analysis showed that the serum SAP levels and mean numbers of survived skin grafts were potent independent factors contributing to wound healing. CONCLUSIONS: The results of this study suggest that the serum SAP levels may be an easy detected predictor for the healing of burn wounds.
Assuntos
Queimaduras/metabolismo , Queimaduras/cirurgia , Sobrevivência de Enxerto , Componente Amiloide P Sérico/metabolismo , Transplante de Pele , Cicatrização , Adulto , Queimaduras/imunologia , Queimaduras/fisiopatologia , Estudos de Casos e Controles , Feminino , Humanos , MasculinoRESUMO
OBJECTIVE: The expanded programme on immunization (EPI) is an important part of the social commonwealth projects providing health care service by the government, which benefits communities. Government has the responsibility for EPI's financing which should be covered by the national budget. It is essential that the cost of EPI service be scientifically estimated to provide propriety information for policy makers. METHODS: This study, using the cost accounting theory of health economics, to calculate EPI service cost at different levels. 3 provinces, 3 prefectures, 9 counties, 18 towns and 12 villages were selected from three provinces Guizhou, Heilongjiang and Zhejiang from the western, central and eastern regions of the country. RESULTS: The average costs for one EPI-targeted child in Guizhou, Heilongjiang and Zhejiang, were 15.68 Yuan, 29.00 Yuan and 31.09 Yuan, and the costs for one dose were 10.99 Yuan, 18.64 Yuan and 16.51 Yuan, respectively. The costs for complete immunization program for one child were 131.88 Yuan, 242.32 Yuan and 280.67 Yuan, respectively. The main factors affecting the cost would include the average personnel cost (salary and benefit cost) by different economic levels of areas, the number of EPI items developed, and the number of total doses for one child. CONCLUSION: (1) Obvious differences were found between different areas. (2) The proportion of the cost was not reasonably set because of the shortage of input. (3) Guideline for different areas to compensate the working item cost according to the number of the items should be formulated.