Comparative analysis of pathogen distribution in patients with fracture-related infection and periprosthetic joint infection: a retrospective study.

BACKGROUND: The purpose of this study is to investigate the microbial patterns of periprosthetic joint infection (PJI) and fracture-related infection (FRI), and guide for the formulation of more accurate empirical antimicrobial regimens based on the differences in pathogen distribution. METHODS: A comparative analysis of pathogen distribution was conducted between 153 patients (76 with PJI and 77 with FRI). Predicted analyses against isolated pathogens from two cohorts were conducted to evaluate the best expected efficacy of empirical antimicrobial regimens (imipenem + vancomycin, ciprofloxacin + vancomycin, and piperacillin/tazobactam + vancomycin). RESULTS: Our study found significant differences in pathogen distribution between the PJI and FRI cohorts. Staphylococci (61.3% vs. 31.9%, p = 0.001) and Gram-negative bacilli (GNB, 26.7% vs. 56.4%, p < 0.001) were responsible for the majority of infections both in the PJI and FRI cohorts, and their distribution in the two cohorts showed a significant difference (p < 0.001). Multi-drug resistant organisms (MDRO) were more frequently detected in the FRI cohort (29.3% vs. 44.7%, p = 0.041), while methicillin-resistant coagulase-negative Staphylococci (MRCoNS, 26.7% vs. 8.5%, p = 0.002) and Canidia albicans (8.0% vs. 1.1%, p = 0.045) were more frequently detected in the PJI cohort. Enterobacter spp. and Acinetobacter baumannii were detected only in the FRI cohort (11.7% and 8.5%, respectively). CONCLUSIONS: Staphylococci and GNB were responsible for the majority of infections in both PJI and FRI. Empirical antimicrobial therapy should focus on the coverage of Staphylococci in PJI and GNB in FRI, and infections caused by MDROs should be more vigilant in FRI, while the high incidence of MRCoNS in PJI should be noted, which could guide for the formulation of more accurate empirical antimicrobial regimens. Targeted therapy for FRI caused by A. baumannii and PJI caused by C. albicans needs to be further investigated. Our study reports significant differences in pathogen distribution between the two infections and provides clinical evidence for studies on the mechanism of implant-associated infection.

Core decompression with ß-tri-calcium phosphate grafts in combination with platelet-rich plasma for the treatment of avascular necrosis of femoral head.

BACKGROUND: This study was aimed to investigate whether the application of platelet-rich plasma (PRP) combined with ß-tri-calcium phosphate (ß-TCP) grafts after core decompression (CD) could improve the clinical outcomes of early stage of avascular necrosis of femoral head. METHODS: Forty-five (54 hips) patients with Ficat-Arlet classification stage I-II treated by CD with ß-TCP grafts with or without the application of PRP from July 2015 to October 2020 were reviewed. Group A (CD + ß-TCP grafts) included 24 patients (29 hips), while group B (CD + ß-TCP grafts + PRP) included 21 patients (25 hips). Visual analogue scale (VAS) score, Harris hip score (HHS), change in modified Kerboul angle and the hip joint survival were evaluated and compared between the groups. Patients had a mean follow-up period of 62.1 ± 17.2 months and 59.3 ± 14.8 months in group A and group B, respectively. RESULTS: The mean VAS scores in group A was significantly higher than group B at the 6 months (2.9 ± 0.7 vs 1.9 ± 0.6, p < 0.01) and final follow up postoperative (2.8 ± 1.2 vs 2.2 ± 0.7, p = 0.04). The mean HHS in group A was significantly lower than group B at the 6 months (80.5 ± 13.8 vs 89.8 ± 12.8, p = 0.02). However, at the final follow up, there is no significant difference between the groups (77.0 ± 12.4 vs 83.1 ± 9.3, p = 0.07). The mean change in modified Kerboul angle was -7.4 ± 10.6 in group A and -19.9 ± 13.9 in group B which is statistically significant (p < 0.01). Survivorship from total hip arthroplasty were 86.2%/84% (p = 0.86) at the final follow up, which was not statistically significant. No serious complications were found in both groups. CONCLUSIONS: A single dose of PRP combined with CD and ß-TCP grafts provided significant pain relief, better functional outcomes, and delayed progression in the short term compared to CD combined with ß-TCP grafts. However, the prognosis of the femoral head did not improve significantly in the long term. In the future, designing new implants to achieve multiple PRP injections may improve the hip preservation rate.

Preoperative prognostic nutritional index is useful factor for predicting postoperative delirium after primary total joint arthroplasty.

BACKGROUND: Postoperative delirium (PD), as an acute brain failure, is widely reported as a very common postoperative complication, and it is closely associated with increased morbidity and mortality. Recently, malnutrition is reported as one of the risk factors for PD. The prognostic nutritional index (PNI) is a simple method for nutritional evaluation. However, few studies have discussed the effectiveness of PNI as a nutritional assessment in predicting PD after primary total joint arthroplasty (TJA). The aim of this study is to investigate potential risk factors including PNI for PD following primary TJA. METHODS: A retrospective analysis of 994 patients was performed to identify risk factors associated with PD after primary TJA by using univariate and multivariate analyses. A receiver operating characteristic curve and the area under the curve were applied to evaluate the significant results of the multivariate analysis and the optimal cutoff value (CV). RESULTS: Postoperatively, sixty-seven patients (67/994, 6.7 %) experienced PD. Univariate analysis demonstrated that operative time, duration of anesthesia, age, hypertension, serum albumin, and PNI differed between the PD and non-PD groups (P < 0.05). Multivariate logistic regression analysis showed that the preoperative PNI (odds ratio [OR]: 0.908; 95 % confidence interval [CI]: 0.840-0.983; CV: 47.05), age of patients (OR: 1.055; 95 % CI: 1.024-1.087; CV: 73.5 years), and hypertension (OR: 1.798; 95 % CI: 1.047-3.086), were independently associated with PD (P < 0.05). CONCLUSIONS: A low preoperative PNI associated with malnutrition was demonstrated to be an independent risk factor for PD following primary TJA. Patients with preoperative low PNI should be cautioned and provided with adequate nutritional intervention to reduce postoperative PD.

Association of hepatitis B infection with high-risk complications in total joint arthroplasty.

BACKGROUND: An increasing number of patients with hepatitis B virus (HBV) infection are undergoing total joint arthroplasty (TJA) surgery in China. Less attention is provided to the special populations and the purpose of this study is to assess the effect of HBV infection on the prognosis TJAs. METHODS: We retrospectively reviewed patients who underwent elective primary hip and knee arthroplasties in Shanghai Huashan Hospital from 2013 to 2016. Non-hepatitis B cohort was built to match the case cohort to identify whether HBV infection was a risk factor associated with postoperative complications. A total number of 196 patients who underwent primary TJAs were involved in the study, including 49 patients with hepatitis B and 147 non-hepatitis B subjects. RESULTS: Among all the patients with TJAs, 5.5% of patients were infected with HBV for the first time. The incidence rate of complications in patients after arthroplasty with hepatitis B infection was significantly higher than that in patients without hepatitis B (10.2% compared to 4.7%, P < 0.01). Surgical related complications (6.1% compared to 3.4%) and general medical complications (4.1% compared to 1.3%) were higher than those in non-B hepatitis group. Compared with non-B hepatitis group, the overall risk of hepatitis B infection increased by 25% (95% CI, 1.04-1.46; p < 0.01). Similar results were obtained for medical and surgical complications. HBV infection presented a 31% increased risk (95% CI, 1.02-1.62; p < 0.01) for medical complication and an 18% increased risk (95% CI, 1.10-1.26; p < 0.01) for surgical complication. No statistical difference was found between the surgical methods and sex. However, a significant difference of C-reactive protein (CRP) level was found between HBV infection group and the matched non-infected group (P < 0.01). CONCLUSION: This is the first study to investigate the risk of perioperative complications of hepatitis B in Chinese TJAs patients. In consideration of the large population of HBV infection in China, more attention and medical care should be provided to patients with HBV infection who need to undergo TJA operation.

Three-dimensional finite element analysis of silk protein rod implantation after core decompression for osteonecrosis of the femoral head.

BACKGROUND: Several methods are available for the treatment of early-stage osteonecrosis of the femoral head. Core decompression with implantation is a widely-used treatment. However, no single implant is recognized as the most effective way to prevent disease progression. Silk has high strength and resiliency. This study explored the possibility of a strong and resilient silk protein biomaterial as a new alternative implant. METHODS: We investigated the biomechanical properties of the silk protein material by regular compression, torsion, and three-point bending tests. We established three-dimensional finite element models of different degrees of femoral head osteonecrosis following simple core decompression, fibula implantation, porous tantalum rod implantation, and silk protein rod implantation. Finally, we compared the differences in displacement and surface stress under load at the femoral head weight-bearing areas between these models. RESULTS: The elastic modulus and shear modulus of the silk protein material was 0.49GPa and 0.66GPa, respectively. Three-dimensional finite element analyses demonstrated less displacement and surface stress at the femoral head weight-bearing areas following silk protein rod implantation compared to simple core decompression (p < 0.05), regardless of the extent of osteonecrosis. No differences were noted in the surface deformation or surface stress of the femoral head weight-bearing areas following silk protein rod, fibula or tantalum rod implantation (p > 0.05). CONCLUSIONS: When compared with simple core decompression, silk protein rod implantation demonstrated less displacement and surface stress at the femoral head weight-bearing area, but more than fibula or tantalum rod implantation. Similar effects on the surface stress of the femoral head between the silk rod, fibula and tantalum rod implantations, combined with additional modifiable properties support the use of silk protein as a suitable biomaterial in osteonecrosis surgery.

An investigation of inactivation mechanisms of Bacillus amyloliquefaciens spores in non-thermal plasma of ambient air.

BACKGROUND: To utilize the potential of non-thermal plasma technologies for food safety control and sanitation, the inactivation mechanisms of Bacillus amyloliquefaciens spores by non-thermal plasma of ambient air (NTP-AA) were investigated using scanning electron microscopy, atomic force microscopy, attenuated total reflectance Fourier transform infrared spectroscopy with chemometric analysis and proton nuclear magnetic resonance spectroscopy, aiming to probe both the morphological and biochemical changes occurring in spores during the kinetic inactivation process. RESULTS: Kinetic analysis indicates that there is no intrinsic D-value (i.e. time required to inactivate 90% of the spores) in spore inactivation by NTP-AA because we observed non-linear (biphasic) inactivation kinetics and, in addition, the inactivation rate depended on the initial spore concentration and how the spores were exposed to the reactive species in the NTP-AA. The presence of suitable amount of water in the NTP-AA field accelerates spore inactivation. CONCLUSION: Progressive erosion of spore surface by NTP-AA with ensuing or concomitant biochemical damage, which includes the alteration of structural proteins, internal lipids and the loss of dipicolinic acid content from the spore core, represent the main mechanisms of inactivation, and there is evidence that reactive NTP-AA species could penetrate the cortex and reach the core of spores to cause damage. © 2018 Society of Chemical Industry.

The predictive value of preoperative neutrophil-lymphocyte ratio (NLR) on the recurrence of the local pigmented villonodular synovitis of the knee joint.

BACKGROUND: To explore and evaluate the predictive value of preoperative Neutrophil-lymphocyte ratio (NLR) on the recurrence of pigmented villonodular synovitis (PVNS) of the knee joint treated by arthroscopic surgery combining local radiotherapy. METHODS: Sixty pathological-proven PVNS cases of the knee joint in our department from April 2006 to March 2017 were included. All of them are treated by arthroscopic synovectomy combined with adjuvant radiotherapy. The pre-operative hematological indexes such as c-reactive protein (CRP), erythrocyte sedimentation rate (ESR), NLR, Platelet-lymphocyte ratio (PLR) and Lymphocyte-monocyte ratio (LMR) were collected retrospectively and their relationship with postoperative recurrence was analyzed by using univariate and multivariate analysis, the receiver operating characteristic curves (ROC curve), the Kappa correspondence test and the Mc Nemar Chi-square test. RESULTS: All 60 patients were followed up for a median of 52.8 months (7-138 months) and the recurrence rate is about 23.3% (14/60). There is a significant difference in NLR between the recurrent and non-recurrent group (P = 0.002). It had a certain correlation with postoperative recurrence (correlation coefficient r = 0.438, P = 0.001). The optimal thresholds in ROC curve were 2.42 (sensitivity 71.4%, specificity 78.3% respectively). which had predictive ability for recurrence after arthroscopic treatment. CONCLUSION: The preoperative NLR is an easy and cost-effective predictor for relapse in PVNS of the knee joint after the arthroscopic surgery combined with local radiotherapy, which is of profound significance to guide clinical work.

Minimally invasive treatment for osteonecrosis of the femoral head with angioconductive bioceramic rod.

PURPOSE: To describe the rationale, the surgical technique, and the short-term follow-up results of a new minimally invasive treatment of osteonecrosis of the femoral head (ONFH) with an angioconductive bioceramic rod (ABR) implant. METHODS: Sixty-two patients (72 hips) with ARCO stage IIA-IIIC ONFH treated with the minimally invasive ABR from January 2012 to December 2016 were reviewed (17 females, 45 males, mean age 44.49). This technique used the angioconductive properties of the porous implant to repair the necrosis by driving vascularization from the trochanter to the necrotic area. Patients had a mean follow-up period of 26.74 months. The outcomes were evaluated by hip joint survival, radiograph, and the Harris Hip Score (HHS). The complications occurred during the treatment period were recorded. RESULTS: No serious post-operative complications occurred during the treatment. The overall joint survival rate was 90.27%, with seven conversions to THA. Improvements were observed in 23 (31.95%) hips, 24 (33.33%) hips remained stable, and 25 (34.72%) hips had worse results according to the radiographic evaluation. The mean HHS at the end follow-up significantly improved compared to the pre-operative mean HHS (82.27 vs 58.14, p < 0.001). In both radiographic evaluation and HHS, the treatment was more effective on patients beneath 44 years old (p < 0.05); ARCO stage II compared to stage III (p < 0.05); and China-Japan Friendship Hospital (CJFH) type C compared to CJFH type L (p < 0.05). CONCLUSIONS: The minimally invasive treatment of ONFH with ABR showed promising results in delaying or even terminating the progression of the necrosis and improving hip function, especially in younger patients and in the early stages of the disease.

Total knee arthroplasty using trochlear groove as guide for position of femoral component in severe knee osteoarthritis.

BACKGROUND: Apart from transepicondylar axis, the native femoral sulcus was also reported to be used as a guide for the femoral component position in total knee arthroplasty (TKA). However, it was not shown in patients with severe knee osteoarthritis. This study was conducted to compare the position of trochlear groove in patients with and without osteoarthritis, and to assess whether trochlear groove could be used as a guide for position of femoral component in TKA for severe knee osteoarthritis. METHODS: Total 50 severe knee osteoarthritis patients (Kellgren Lawrence grade 3 or 4) who underwent TKA were included. Meanwhile, 50 patients who underwent arthroscopic surgery without osteoarthritis were included as control. The distance from trochlear groove to the midpoint of a virtual anterior condyle osteotomy line (parallel to the posterior condyle line) (a-b) was recorded by radiological and surgical measurements. Midpoint of transepicondylar axis and trochlear groove were used as guide for placing prosthesis model in TKA, respectively. No-thumb test was performed to assess the patellar tracking. The position of femoral component was finally performed using trochlear groove as guide in TKA. RESULTS: Value of "a-b" was significantly different between osteoarthritic and control knees (P = 0.008). During the placement of prosthesis model, similar patellar tracking was detected between using midpoint of transepicondylar axis and trochlear groove as guide (P > 0.05). After placing femoral component using trochlear groove as guide, most patients obtained good patellofemoral congruence with pneumatic tourniquet inflated (n = 43) or deflated (n = 5), and good patellofemoral congruence was also obtained by lateral patellar retinaculum release in two patients. CONCLUSION: Despite the shifting of trochlear groove caused by severe knee osteoarthritis, trochlear groove can be used as a guide for position of femoral component, with equivalent patellar tracking compared with transepicondylar axis.

[Study on the Structure and Nanomechanical Properties of Organic Montmorillonite Reinforced Urea-Formaldehyde Adhesive].

Montmorillonite (MMT) is a natural mineral that has great potential as reinforcing filler in wood adhesives. In order to study the reinforcing mechanism more clearly, organic MMT-reinforced urea-formaldehyde adhesive (UF-OMMT) was prepared to analyze its chemical properties and crystal structure with Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction (XRD). The nanomechanical properties of UF, UF-MMT and PF-OMMT adhesives in the interphase of wood-based composite were analyzed by nanoindentation (NI) and the macro-bonding strength of composite were also tested. The results of FTIR and XRD indicated that in the spectra of MMT modified by cetyltrimethyl ammonium bromide (CTAB), the new peaks appeared at 2 929 and 2 853 cm-1corresponding to C­H stretching vibrations of the organic intercalation agent (CTAB). The (001) diffraction peak of MMT was shifted to a lower angle and the lamellar repeat distance increases from 1.51 nm to 2.71 nm after organic modification. The ion exchange of the cations in montmorillonite with organic ammonium ions and the separating and disorder crystalline improved the compatibility of the modified clay with the polymers and the dispersion of the layers into the matrix. The good physical filling of MMT particles and the elastomer formed during the reaction could transfer and distribute loads between components more homogenously, therebycontributing to the improved mechanical properties of adhesives. As compared to the untreated UF, the reduced elastic modulus and hardness of UF-OMMT in the interphase increased by about 66.9% and 24.2%, respectively. At the macroscale, the bonding strength of plywood bonded with UF-OMMT increased by about 97% as compared to that of unmodified UF resin. The positive effects of montmorillonite on water and heat resistance can be attributed to the better barrier properties of the interphase.

Biological toxicity of cellulose nanocrystals (CNCs) against the luxCDABE-based bioluminescent bioreporter Escherichia coli 652T7.

The aim of this study was to evaluate the biological toxicity of cellulose nanocrystals (CNCs) using the constitutively bioluminescent luxCDABE-based bioreporter Escherichia coli 652T7. The effects of CNCs on E. c oli 652T7 biotoxicity were investigated at different CNC concentrations, reaction times, and IC50 values. CNC toxicity was also compared with and without ultrasonic dispersion to establish dispersibility effects. The results demonstrated that CNCs were not significantly toxic at concentrations at or below 250 mg/L. At concentrations higher than 300 mg/L, toxicity increased linearly as CNC concentrations increased up to 2000 mg/L. IC50 calculations demonstrated an increase in cytotoxicity as CNC exposure times increased, and elevated dispersibility of the CNCs were shown to increase cytotoxicity effects. These results suggest that CNCs can impact microbial populations if elevated concentration thresholds are met.

Removal of arsenic from simulation wastewater using nano-iron/oyster shell composites.

In this paper, a nano-iron/oyster shell composite (NI/OS) was firstly prepared by an in-situ synthesis method to explore an efficient treatment technology for arsenic (As) contaminated wastewater. The micromorphologies and composition of the composite were characterized using field emission scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of the preparation parameters, as well as the treatment conditions, on the removal of As(Ⅲ) were also investigated. The characterization results showed that iron nanoparticles with a diameter of 60 nm were introduced into the composite by an in-situ reduction method. The physicochemical properties of the iron nanoparticles, such as diameter and aggregation, were influenced by the iron source more than the choice of reductant and temperature in the synthesis process, and these properties were closely related to the treatment performance of the composite. Under the suitable reaction conditions of a pH value of 6.8, a temperature of 20 °C, and an initial concentration of As(Ⅲ) of 1.8 mg/L, As(Ⅲ) was almost completely removed from the simulation wastewater.

HDAC5 promotes osteosarcoma progression by upregulation of Twist 1 expression.

Histone deacetylases (HDACs) form a family of enzymes, which have fundamental roles in the epigenetic regulation of gene expression and contribute to the growth, differentiation, and apoptosis of cancer cells. In this study, we firstly investigated the biological function of HDAC5 in osteosarcoma cells. We found that mRNA and protein levels of HDAC5 were upregulated in osteosarcoma tissues and cell lines. Furthermore, overexpression of HDAC5 could promote cell proliferation in osteosarcoma cell lines. In contrast, HDAC5 knockdown using small interfering RNA inhibited cell proliferation. At the molecular level, we demonstrated that HDAC5 promoted mRNA expression of twist 1, which has been reported as an oncogene. Together, these results highlighted for the first time an unrecognized link between HDAC5 and osteosarcoma progression and demonstrated that its specific inhibition might contribute to the treatment of tumorigenesis.

CXCL12-CXCR4 contributes to the implication of bone marrow in cancer metastasis.

The CXCL12-CXCR4 axis is postulated to be a key pathway in the interaction between (cancer) stem cells and their surrounding supportive cells in the (cancer) stem cell niche. As the bone marrow constitutes a unique microenvironment for cancer cells, the CXCL12-CXCR4 axis assists the bone marrow in regulating cancer progression. This interaction can be disrupted by CXCR4 antagonists, and this concept is being used clinically to harvest hematopoietic stem/progenitor cells from the bone marrow. The functions of CXCL12-CXCR4 axis in cancer cell-tumor microenvironment interaction and angiogenesis have been recently studied. This review focuses on how CXCL12-CXCR4 helps the bone marrow in creating a tumor mircoenvironment that results in the cancer metastasis. It also discusses ongoing research regarding the clinical feasibility of CXCR4 inhibitors.

Three-dimensional virtual reality simulation of periarticular tumors using Dextroscope reconstruction and simulated surgery: a preliminary 10-case study.

BACKGROUND: Dextroscope® three-dimensional (3D) imaging has been extensively used to generate virtual reality (VR) workspaces for neurosurgery and laparoscopy, but few applications have been reported for orthopedic surgery. Here, we investigated orthopedic periarticular tumor surgery planning and anatomical characteristics using a Dextroscope. MATERIAL AND METHODS: Patients undergoing surgery for periarticular tumors (n=10) between October 2008 and June 2010 were enrolled and presurgically subjected to computed tomography (CT), magnetic resonance imaging (MRI), and MRI angiography (MRI-A). Imaging data were transferred and integrated in a Dextroscope to produce a VR simulation. The presurgical 3D anatomical reconstructions and intraoperative anatomical characteristics (virtual vs. actual data) and surgical approach (virtual vs. actual situation) measurement and subjective appearance were compared. RESULTS: Anatomical characteristics in the area of interest and tumor diameters in all 3 planes (superior-inferior, medial-lateral, and anteroposterior) were consistent between virtual and actual data (3.92±1.22, 1.96±0.53, and 1.73±0.44 vs. 3.92±1.13, 1.91±0.44, and 1.81±0.41; P=0.99, 0.24, and 0.09, respectively). However, the virtual surgical situations were inconsistent with the actual intraoperative situation in many cases, leading to complications. The resolutions of the original CT, MRI, and MRI-A images directly correlated with 3D simulation quality, with soft tissues most poorly represented. Tumor tissue imaging quality in 3D varied extensively by tumor type. CONCLUSIONS: Anatomical structures of periarticular tumors can be reconstructed using the Dextroscope system with good accuracy in the case of simple fenestration, increasing treatment individualization, surgical competence level, and potentially reducing intraoperative complications. However, further specialization of VR tools for use in orthopedic applications that involve specialized tools and procedures, such as drilling and implant placement, are urgently need.

Evaluation of the 3D finite element method using a tantalum rod for osteonecrosis of the femoral head.

BACKGROUND: The aim of this study was to contrast the collapse values of the postoperative weight-bearing areas of different tantalum rod implant positions, fibula implantation, and core decompression model and to investigate the advantages and disadvantages of tantalum rod implantation in different ranges of osteonecrosis in comparison with other methods. MATERIAL AND METHODS: The 3D finite element method was used to establish the 3D finite element model of normal upper femur, 3D finite element model after tantalum rod implantation into different positions of the upper femur in different osteonecrosis ranges, and other 3D finite element models for simulating fibula implant and core decompression. RESULTS: The collapse values in the weight-bearing area of the femoral head of the tantalum rod implant model inside the osteonecrosis area, implant model in the middle of the osteonecrosis area, fibula implant model, and shortening implant model exhibited no statistically significant differences (p>0.05) when the osteonecrosis range was small (60°). The stress values on the artificial bone surface for the tantalum rod implant model inside the osteonecrosis area and the shortening implant model exhibited statistical significance (p<0.01). CONCLUSIONS: Tantalum rod implantation into the osteonecrosis area can reduce the collapse values in the weight-bearing area when osteonecrosis of the femoral head (ONFH) was in a certain range, thereby obtaining better clinical effects. When ONFH was in a large range (120°), the tantalum rod implantation inside the osteonecrosis area, shortening implant or fibula implant can reduce the collapse values of the femoral head, as assessed by other methods.

Three-dimensional virtual reality simulation of periarticular tumors using Dextroscope reconstruction and simulated surgery: a preliminary 10 case study.

UNLABELLED: Dextroscope three-dimensional (3D) imaging has been extensively applied for generation of virtual reality (VR) workspaces for in neurosurgery and laparoscopy, though few applications in orthopedic surgery have been reported. Patients undergoing surgery for periarticular tumors (n = 10) from Oct. 2008 to Jun. 2010 were enrolled and presurgically subjected to computed tomography (CT), magnetic resonance imaging (MRI), and MRI angiography (MRI-A). Imaging data was transferred and integrated in Dextroscope, producing a VR simulation. Resultant presurgical 3D anatomical reconstructions and intraoperative anatomical characteristics (virtual vs. actual data) and surgical approach (virtual vs. actual situation) measurement and subjective appearance were compared. Anatomical characteristics in the area of interest and tumor diameters were consistent between virtual and actual data. However, the virtual surgical situations remained inconsistent with the actual intraoperative situation in many cases, leading to complications. The resolution of original CT, MRI, and MRI-A images directly correlated with the quality of 3D simulations, with soft tissues most poorly represented. Tumor tissue imaging quality in 3D varied extensively by tumor type. CONCLUSIONS: Anatomical structures of periarticular tumors can be reconstructed using the Dextroscope system with good accuracy in the case of simple fenestration, increasing individualization of treatment, surgical competence level, and potentially reducing intraoperative complications. However, further specialization of VR tools for use in orthopedic applications that involve specialized tools and procedures, such as drilling and implant placement, are urgently required.

Development of Halloysite Nanotube-Infused Thermoset Soybean Bio-Resin for Advanced Medical Packaging.

The development of eco-friendly, mechanically stable, and biocompatible materials for medical packaging has gained significant attention in recent years. Halloysite nanotubes (HNTs) have emerged as a promising nanomaterial due to their unique tubular structure, high aspect ratio, and biocompatibility. We aim to develop a novel soybean oil-based thermoset bio-resin incorporating HNTs and to characterize its physical and functional properties for medical packaging. Soybean oil was epoxidized using an eco-friendly method and used as a precursor for preparing the thermoset resin (ESOR). Different amounts of HNTs (0.25, 0.50, and 1.0 wt.%) were used to prepare the ESOR/HNTs blends. Various characteristics such as transparency, tensile strength, thermal resistance, and water absorption were investigated. While incorporating HNTs improved the tensile strength and thermal properties of the ESOR, it noticeably reduced its transparency at the 1.0 wt.% level. Therefore, HNTs were modified using sodium hydroxide and (3-Aminopropyl) triethoxysilane (APTES) and ESOR/HNTs blends were made using 1.0 wt.% of modified HNTs. It was shown that modifying HNTs using NaOH improved the transparency and mechanical properties of prepared blends compared to those with the same amount of unmodified HNTs. However, modifying using (3-Aminopropyl) triethoxysilane (APTES) decreased the transparency but improved the water absorption of prepared resins. This study provides valuable insights into the design of HNT-based ESOR blends as a sustainable material for medical packaging, contributing to the advancement of eco-friendly packaging solutions in the healthcare industry.

Treatment of old femoral neck fractures in young adults with a medial buttress plate combined with three cannulated screws and iliac autograft: Surgical technique and preliminary results.

OBJECTIVES: Whether the application of MBP plus cannulated screws works for old femoral neck fractures (OFNF) is unknown. The purpose of this study is to present a case series of OFNF in young adults using calcar buttress plate and three cannulated screws with autologous iliac bone grafts. METHODS: We conducted a retrospective study of eleven young patients (6 males and 5 females) with femoral neck fractures who were treated with open reduction and internal fixation at a single center between 2013 and 2021. The subjects had trauma-to-surgery intervals longer than 3weeks and all were fixed with a calcar buttress plate combined with three cannulated screws, which were supplemented by autologous iliac bone grafts. RESULTS: All eleven cases achieved radiological union under the surgery technique, which occurred on average at 4.46±1.29months after surgery. Complications included femoral neck shortening in all cases, heterotopic ossification in three cases, and osteonecrosis of the femoral head in two cases. One patient with osteonecrosis of the femoral head received total hip arthroplasty. In follow-ups of 24-52months, the median Harris hip score was 81.64±15.39. CONCLUSIONS: The medial buttress plate in combination with three cannulated screws and iliac autograft may be a good choice for treating old femoral neck fractures in young adults. LEVEL OF EVIDENCE: IV, case series.

Electrospun microcrystalline cellulose/chitosan porous composite nanofibrous membranes modified by non-thermal plasma for gaseous formaldehyde adsorption.

To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.