Discrete Arsonate-Grafted Inverted-Keggin 12-Molybdate Ion [Mo12O32(OH)2(4-N3C2H2-C6H4AsO3)4]2- and Formation of a Copper(II)-Mediated Metal-Organic Framework.

The discrete inverted-Keggin ion [Mo12O32(OH)2(4-N3C2H2-C6H4AsO3)4]2- (1) has been prepared in an aqueous acidic (pH 0.8) medium by the reaction of MoO3 with the (4-triazolylphenyl)arsonic acid 4-N3C2H2-C6H4AsO3H2 under hydrothermal conditions and was isolated as a sodium salt in 21% yield. The exact same reaction in the presence of Cu2+ ions resulted in the neutral metal-organic framework (MOF) Cu2[Mo12O34(4-N3C2H2-C6H4AsO3)4] (Cu-1) in 68% yield. The inverted-Keggin ion 1 comprises a metal-oxo core, which is capped by four organoarsonate groups, and in Cu-1, individual polyanions are linked in the solid state by coordination of the Cu2+ ions with the triazolyl groups. The discrete ion 1 was characterized by single-crystal X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and atomic absorption (AA) spectroscopy, as well as thermogravimetric analysis (TGA), and the POM-MOF Cu-1 was characterized by single-crystal and powder XRD, FT-IR, TGA, and gas sorption. Cu-1 has channels with a diameter of around ∼0.9 nm and exhibits a water-vapor adsorption capacity of 89.7 cm3 g-1 (p/p0 = 0.95).

Organically Functionalized Mixed-Valent Polyoxo-30-molybdate Wheel and Neutral Tetramolybdenum(V) Oxo Cluster.

The first organofunctionalized mixed-valent polyoxo-30-molybdate wheel, [MoVI18MoV12O84{AsO2(CH3)2}18]18- (Mo30), was synthesized in aqueous, mildly acidic conditions, and upon further acidification, the neutral tetramolybdenum(V) oxo cluster [MoV4O8{AsO2(CH3)2}4] (Mo4) was obtained. Single-crystal X-ray diffraction (XRD) revealed that Mo30 comprises 18 MoVI and 12 MoV ions arranged in a cyclic fashion with alternating {MoV2} and {MoVI3} groups, which are capped by 18 dimethylarsinate ligands, resulting in a novel polyoxo-30-molybdate wheel with a central cavity of ∼1.5 nm. On the other hand, Mo4 has a distorted-cubic structure, with the corners of the cube being occupied by alternating MoV ions and oxo ligands. The compounds were characterized in solution by 1H and 13C NMR and UV-vis spectroscopy and in the solid state by X-ray photoelectron spectroscopy and powder XRD. Mo30 represents a novel type of polyanionic cycle with manyfold possibilities regarding host-guest chemistry.

Discovery of Polythioplatinate(II) [Pt3S2(SO3)6]10- and Study of Its Solution and Catalytic Properties.

We have discovered the first polythioplatinate(II), [PtII3S2(SO3)6]10- (1), which was synthesized in aqueous basic medium (pH 11) by hydrothermal heating at 150 °C. Polyanion 1 comprises a discrete, triangular assembly of three Pt2+ ions linked by two µ3-sulfido ligands, and their square-planar coordination geometry is completed by two terminal S-bound sulfito ligands. Polyanion 1 was isolated as a hydrated sodium salt, Na10[PtII3(µ3-S)2(SO3)6]·22H2O (Na-1), which was characterized in the solid state by single-crystal X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectra, and elemental analysis, in solution by 195Pt NMR and atomic absorption spectroscopy, and in the gas phase by electrospray ionization mass spectrometry. Density functional theory calculations were performed, and the 195Pt NMR chemical shifts of 1 were computed theoretically and shown to match well with the experimental data. Furthermore, the discrete title polyanion 1 was immobilized on mesoporous SBA-15 support and used as a precatalyst for the hydrogenation of o-xylene.

Discovery of a Neutral 40-PdII-Oxo Molecular Disk, [Pd40O24(OH)16{(CH3)2AsO2}16]: Synthesis, Structural Characterization, and Catalytic Studies.

We report on the synthesis and structural characterization of a giant, discrete, and neutral molecular disk, [Pd40O24(OH)16{(CH3)2AsO2}16] (Pd40), comprising a 40-palladium-oxo core that is capped by 16 dimethylarsinate moieties, resulting in a palladium-oxo cluster (POC) with a diameter of ∼2 nm. Pd40, which is the largest known neutral Pd-based oxo cluster, can be isolated either as a discrete species or constituting a 3D H-bonded organic-inorganic framework (HOIF) with a 12-tungstate Keggin ion, [SiW12O40]4- or [GeW12O40]4-. 1H and 13C NMR as well as 1H-DOSY NMR studies indicate that Pd40 is stable in aqueous solution, which is also confirmed by ESI-MS studies. Pd40 was also immobilized on a mesoporous support (SBA15) followed by the generation of size-controlled Pd nanoparticles (diameter ∼2-6 nm, as based on HR-TEM), leading to an effective heterogeneous hydrogenation catalyst for the transformation of various arenes to saturated carbocycles.

Discovery and Supramolecular Interactions of Neutral Palladium-Oxo Clusters Pd16 and Pd24.

We report on the synthesis, structure, and physicochemical characterization of the first three examples of neutral palladium-oxo clusters (POCs). The 16-palladium(II)-oxo cluster [Pd16 O24 (OH)8 ((CH3 )2 As)8 ] (Pd16 ) comprises a cyclic palladium-oxo unit capped by eight dimethylarsinate groups. The chloro-derivative [Pd16 Na2 O26 (OH)3 Cl3 ((CH3 )2 As)8 ] (Pd16 Cl) was also prepared, which forms a highly stable 3D supramolecular lattice via strong intermolecular interactions. The 24-palladium(II)-oxo cluster [Pd24 O44 (OH)8 ((CH3 )2 As)16 ] (Pd24 ) can be considered as a bicapped derivative of Pd16 with a tetra-palladium-oxo unit grafted on either side. The three compounds were fully characterized 1) in the solid state by single-crystal and powder XRD, IR, TGA, and solid-state 1 H and 13 C NMR spectroscopy, 2) in solution by 1 H, 13 C NMR and 1 H DOSY spectroscopic methods, and 3) in the gas phase by electrospray ionization mass spectrometry (ESI-MS).

Tuning Coordination Geometry of Nickel Ketoiminates and Its Influence on Thermal Characteristics for Chemical Vapor Deposition of Nanostructured NiO Electrocatalysts.

Nickel-based nanostructured materials have gained widespread attention, particularly for energy-related applications. Employing chemical vapor deposition (CVD) for NiO necessitates suitable nickel precursors that are volatile and stable. Herein, we report the synthesis and characterization of a series of new nickel ß-ketoiminato complexes with different aliphatic and etheric side chain substitutions, namely, bis(4-(isopropylamino)-pent-3-en-2-onato)nickel(II) ([Ni(ipki)2], 1), bis(4-(2-methoxyethylamino)pent-3-en-2-onato)nickel(II) ([Ni(meki)2], 2), bis(4-(2-ethoxyethylamino)pent-3-en-2-onato)nickel(II) ([Ni(eeki)2], 3), bis(4-(3-methoxy-propylamino)-pent-3-en-2-onato)nickel(II) ([Ni(mpki)2], 4), and bis(4-(3-ethoxypropylamino)pent-3-en-2-onato)nickel(II) ([Ni(epki)2], 5). These compounds have been thoroughly characterized with regard to their purity and identity by means of nuclear magnetic resonance spectroscopy (NMR) and electron impact mass spectrometry (EI-MS). Contrary to other transition metal ß-ketoiminates, the imino side chain strongly influences the structural geometry of the complexes, which was ascertained via single-crystal X-ray diffraction (XRD). As a result, the magnetic momenta of the molecules also differ significantly as evidenced by the magnetic susceptibility measurements employing Evan's NMR method in solution. Thermal analysis revealed the suitability of these compounds as new class of precursors for CVD of Ni containing materials. As a representative precursor, compound 2 was evaluated for the CVD of NiO thin films on Si(100) and conductive glass substrates. The as-deposited nanostructured layers were stoichiometric and phase pure NiO as confirmed by XRD, Rutherford backscattering spectrometry (RBS), and nuclear reaction analysis (NRA). X-ray photoelectron spectroscopy (XPS) indicated the formation of slightly oxygen-rich surfaces. The assessment of NiO films in electrocatalysis revealed promising activity for the oxygen evolution reactions (OER). The current densities of 10 mA cm-2 achieved at overpotentials ranging between 0.48 and 0.52 V highlight the suitability of the new Ni complexes in CVD processes for the fabrication of thin film electrocatalysts.

Polyoxopalladate-Loaded Metal-Organic Framework (POP@MOF): Synthesis and Heterogeneous Catalysis.

We report on the synthesis and characterization of the first polyoxo-noble-metalate-containing metal-organic framework (MOF) material, wherein the preformed MIL-101 has been impregnated with the discrete, cuboid-shaped polyoxopalladate [Pd13Se8O32]6- (Pd13Se8), leading to the composite Pd13Se8@MIL-101. This material was characterized by FTIR, TGA, elemental analysis, powder-XRD, N2 sorption (BET), SEM-EDX, and XPS. Furthermore, the Pd13Se8@MIL-101 composite was shown to be an effective, stable, and recyclable heterogeneous precatalyst for the Suzuki-Miyaura cross-coupling reaction at room temperature utilizing environmentally benign solvents, such as water and methanol.

Correction: Micro-spectroscopy of HKUST-1 metal-organic framework crystals loaded with tetracyanoquinodimethane: effects of water on host-guest chemistry and electrical conductivity.

Correction for 'Micro-spectroscopy of HKUST-1 metal-organic framework crystals loaded with tetracyanoquinodimethane: effects of water on host-guest chemistry and electrical conductivity' by Miguel Rivera-Torrente et al., Phys. Chem. Chem. Phys., 2019, 21, 25678-25689.

Discovery of Polyoxo-Noble-Metalate-Based Metal-Organic Frameworks.

Here we report on the synthesis, structure, and characterization of the first example of a polyoxopalladate (POP)-based metal-organic framework (MOF). This novel class of materials comprises discrete polyoxo-13-palladate(II) nanocubes [Pd13O8(AsO4)8H6]8- decorated by four Ba2+ ions on each of two opposite faces. These secondary building units (SBUs) are linked to each other via rigid linear organic groups, resulting in a stable 3D POP-MOF framework, which exhibits interesting sorption as well as catalytic properties.

Micro-spectroscopy of HKUST-1 metal-organic framework crystals loaded with tetracyanoquinodimethane: effects of water on host-guest chemistry and electrical conductivity.

Composite materials, consisting of a metal-organic framework (MOF) and a guest molecule, further denoted as guest@MOF composites, have gained strong interest due to the guest-induced tunability of the host properties, for example in sensing or electroconductivity applications. However, decoding the complexity of these guest@MOF composites and extracting structure-performance relationships are far from trivial and require the use of a gamut of characterization tools. In this work, we use various micro-spectroscopic tools both under static (ex situ) and dynamic (in situ) conditions to map the properties and diffusion behavior of TCNQ (7,7,8,8-tetracyanoquinodimethane) as a guest molecule in single HKUST-1 crystals as the host. Raman micro-spectroscopy allowed us to map the spatial distribution of TCNQ within HKUST-1 single crystals, thereby revealing a heterogeneous distribution of TCNQ after initial TCNQ-infiltration, concentrated at the crystal edges, and a homogeneous redistribution upon water vapor treatment. These insights are correlated to I-V scans at different temperatures and to electrochemical impedance spectroscopy (EIS), which allowed us to verify the different contributions to conductivity. These data showed changes in electrical conductivity after exposing the sample to moisture and air. In situ FT-IR micro-spectroscopy during treatment with moisturized nitrogen gas suggests lower transient diffusion rates for water inside TCNQ@HKUST-1 relative to pristine HKUST-1, likely due to steric hindrance of the pore-filling TCNQ molecules in the HKUST-1 framework. The application of micro-spectroscopic techniques is crucial to uncovering MOF intracrystal heterogeneities and yielding rationally-derived instructions for the improved design of guest@MOF systems.

Green Synthesis of a New Al-MOF Based on the Aliphatic Linker Mesaconic Acid: Structure, Properties and In Situ Crystallisation Studies of Al-MIL-68-Mes.

A new aluminium metal-organic framework (MOF), based on the short aliphatic linker molecule mesaconic acid (H2 Mes; methylfumaric acid) is reported. Al-MIL-68-Mes with composition [Al(OH)(O2 C-C3 H4 -CO2 )]⋅n H2 O is obtained after short reaction times of 45 minutes under mild, aqueous synthesis conditions (95 °C). It exhibits a kagome-like framework structure with large hexagonal, and small trigonal channels (diameters of ≈6 and ≈2 Å, respectively) and a specific surface area of SBET ≈1040 m2 g-1 (VMIC =0.42 cm3 g-1 ). A sigmoidal vapour sorption isotherm for water, and uptakes of water and methanol above 30 wt. % were observed. Al-MIL-68-Mes is stable against water ad-/desorption and its thermal stability is 350 °C in air. The proton conductivity for the hydrated MOF showed values up to 1.1×10-5  S cm at 130 °C and 100 % relative humidity, which exceeds the values observed for the non-hydrated compound by up to four orders of magnitude. Using synchrotron radiation the crystallisation of the MOF by in situ PXRD was also studied at temperatures from 80 to 100 °C. Kinetic evaluation revealed that the induction periods and crystallization times vary depending on the synthesis batch, but the rate limiting steps are consistently observed.

Rational Development of Cobalt ß-Ketoiminate Complexes: Alternative Precursors for Vapor-Phase Deposition of Spinel Cobalt Oxide Photoelectrodes.

A series of six cobalt ketoiminates, of which one was previously reported but not explored as a chemical vapor deposition (CVD) precursor, namely, bis(4-(isopropylamino)pent-3-en-2-onato)cobalt(II) ([Co( ipki)2], 1), bis(4-(2-methoxyethylamino)pent-3-en-2-onato)cobalt(II) ([Co(meki)2], 2), bis(4-(2-ethoxyethylamino)pent-3-en-2-onato)cobalt(II) ([Co(eeki)2], 3), bis(4-(3-methoxy-propylamino)pent-3-en-2-onato)cobalt(II) ([Co(mpki)2], 4), bis(4-(3-ethoxypropylamino)pent-3-en-2-onato)cobalt(II) ([Co(epki)2], 5), and bis(4-(3-isopropoxypropylamino)pent-3-en-2-onato)cobalt(II) ([Co( ippki)2], 6) were synthesized and thoroughly characterized. Single-crystal X-ray diffraction (XRD) studies on compounds 1-3 revealed a monomeric structure with distorted tetrahedral coordination geometry. Owing to the promising thermal properties, metalorganic CVD of CoO x was performed using compound 1 as a representative example. The thin films deposited on Si(100) consisted of the spinel-phase Co3O4 evidenced by XRD, Rutherford backscattering spectrometry/nuclear reaction analysis, and X-ray photoelectron spectroscopy. Photoelectrochemical water-splitting capabilities of spinel CoO x films grown on fluorine-doped tin oxide (FTO) and TiO2-coated FTO revealed that the films show p-type behavior with conduction band edge being estimated to -0.9 V versus reversible hydrogen electrode. With a thin TiO2 underlayer, the CoO x films exhibit photocurrents related to proton reduction under visible light.

Microwave-Assisted Synthesis of Perovskite SrSnO3 Nanocrystals in Ionic Liquids for Photocatalytic Applications.

Nanosized SrSnO3 photocatalysts have been successfully synthesized by microwave synthesis in various ionic liquids (ILs) followed by a heat treatment process to optimize the materials' crystallinity. The influence of the ILs with various cations such as 1-butyl-3-methylimidazolium ([C4mim]+), 6-bis(3-methylimidazolium-1-yl)hexane ([C6(mim)2]2+), butylpyridinium ([C4Py]+), and tetradecyltrihexylphosphonium ([P66614]+) and bis(trifluoromethanesulfonyl)amide ([Tf2N]-) as the anion on the structure, crystallization, and morphology of the products was investigated. The samples were characterized by X-ray diffraction (XRD), thermogravimetry (TG), scanning electron microscopy (SEM), surface area analysis by gas adsorption, X-ray photoelectron spectroscopy (XPS), diffuse reflectance UV-vis spectroscopy, and Raman and IR spectroscopy. According to structure characterization by XRD and Raman spectroscopy all samples crystallized phase-pure in the orthorhombic GdFeO3 perovskite structure type. SEM reveals that, on the basis of the IL, the obtained SrSnO3 nanoparticles exhibit different morphologies and sizes. Rod-shaped particles are formed in [C4mim][Tf2N], [C6(mim)2][Tf2N]2, and [P66614][Tf2N]. However, the particle dimensions and size distribution vary depending on the IL and range from quite thin and long needlelike particles with a narrow size distribution obtained in [P66614][Tf2N] to relatively larger particles with a broader size distribution obtained in [C6(mim)2][Tf2N]2. In contrast, in [C4Py][Tf2N] nanospheres with a diameter of about 50 nm form. For these particles the highest photocatalytic activity was observed. Our investigations indicate that the improved photocatalytic activity of this material results from the synergistic effect of the relatively large surface area associated with nanosize and an appropriate energy band structure.

Improved charge carrier separation in barium tantalate composites investigated by laser flash photolysis.

Charge carrier dynamics in phase pure Ba5Ta4O15 and in a Ba5Ta4O15-Ba3Ta5O15 composite have been studied by means of diffuse reflectance laser flash photolysis spectroscopy in the presence and absence of an electron donor, in order to reveal the reason for the improved photocatalytic performance of the latter. For the first time the transient absorption of trapped electrons with a maximum at around 650 nm and of trapped holes with a transient absorption maximum at around 310 nm is reported for tantalates. The decay kinetics of the photogenerated charge carriers could be fitted by second order reaction kinetics, and the direct recombination of the trapped electrons with the trapped holes was proven. In the absence of an electron donor, no difference in the decay behavior between the phase pure material and the composite material is found. In the presence of methanol, for the pure phase Ba5Ta4O15 the recombination of the charge carriers could not be prevented and the trapped electrons also recombine with the ˙CH2OH radical formed via the methanol oxidation by the trapped holes. However, in the composite, the electron can be stored in the system, the ˙CH2OH radical injects an electron into the conduction band of the second component of the composite, i.e., Ba3Ta5O15. Thus, the electrons are available for an extended period to induce reduction reactions.

Hydrothermal carbonization of biomass from landscape management - Influence of process parameters on soil properties of hydrochars.

Besides pyrolysis the technology of hydrothermal carbonization (HTC) is tested to produce hydrochars for soil improvement. The chemical and physical properties of the hydrochars mainly depend on the feedstock and the process parameters reaction time and process temperature. Systematic investigations on the influences of these process parameters on soil properties of hydrochars like water holding capacity (WHC) and cation exchange capacity (CEC) are missing. In this study, a rush-rich biomass was carbonized within defined HTC process conditions under variation of reaction time and process temperature to produce hydrochars. Analysis of WHC, CEC, the elemental composition and Fourier-transform infrared spectroscopy (FT-IR) were performed to evaluate the influence of HTC process conditions on the pedological hydrochar properties. The results indicated that at increasing reaction severity (reaction time and process temperature) WHC and CEC decreased as well as the elemental O/C ratio. The decrease of WHC and CEC is based on the decrease of the hydrochar surface polarity. However, even the lowest WHC and CEC of investigated hydrochars still exceeded those of pure quartz sand by factors of 5-10. An application of hydrochars produced at severe HTC conditions could improve WHC and CEC of sandy soils. This has to be investigated in further studies.

Three Series of Sulfo-Functionalized Mixed-Linker CAU-10 Analogues: Sorption Properties, Proton Conductivity, and Catalytic Activity.

Ten mixed-linker metal-organic frameworks [Al(OH)(m-BDC-X)(1-y)(m-BDC-SO3H)y] (H2BDC = 1,3-benzenedicarboxylic acid; X = H, NO2, OH) exhibiting the CAU-10-type structure were synthesized. The compounds can be grouped into three series according to the combination of ligands employed. The three series of compounds were obtained by employing different ratios of m-H2 BDC-X and m-H2BDC-SO3Li. The resulting compounds, which are denoted CAU-10-H/Sx, -N/Sx and -O/Sx, show exceptionally high thermal stability for sulfonated materials of up to 350 °C. Detailed characterization with special focus on polarity and acidity was performed, and the impact of the additional SO3H groups is clearly demonstrated by changes in the sorption affinities/capacities towards several gases and water vapor. In addition, selected samples were evaluated for proton conductivity and as catalysts for the gas-phase dehydration of ethanol to ethylene. While only very low proton conductivities were observed, a pronounced increase in catalytic activity was achieved. Although reactions were performed at temperatures of 250 and 300 °C for more than 40 h, no desulfonation and no loss of crystallinity were observed, and stable ethanol conversion resulted. This demonstrates the high stability of this material.

Enhanced photocatalytic hydrogen generation from barium tantalate composites.

(111)-layered Ba5Ta4O15 photocatalysts were synthesised by a solid state reaction route and a citrate synthesis route, and their structural and electronic properties were investigated. After citrate route preparation, the presence of a second phase, namely Ba3Ta5O15, was determined by X-ray powder diffraction and absorption spectroscopy. The existence of this phase had a profound effect on the photocatalytic activity of this Ba5Ta4O15/Ba3Ta5O15 composite in comparison to the pure Ba5Ta4O15 materials. The photocatalytic performance of the barium tantalates was evaluated by investigating the capability in ˙OH radical formation and hydrogen generation. Strongly increased hydrogen evolution rates for the Ba5Ta4O15/Ba3Ta5O15 composite, up to 160% higher than for the pure Ba5Ta4O15, were determined, and only very small amounts of Rh co-catalyst, deposited on the photocatalysts by stepwise reductive photo-deposition, were needed to achieve these results.

Proton transport in functionalised additives for PEM fuel cells: contributions from atomistic simulations.

The conventional polymer electrolyte membrane (PEM) materials for fuel cell applications strongly rely on temperature and pressure conditions for optimal performance. In order to expand the range of operating conditions of these conventional PEM materials, mesoporous functionalised SiO(2) additives are developed. It has been demonstrated that these additives themselves achieve proton conductivities approaching those of conventional materials. However, the proton conduction mechanisms and especially factors influencing charge carrier mobility under different hydration conditions are not well known and difficult to separate from concentration effects in experiments. This tutorial review highlights contributions of atomistic computer simulations to the basic understanding and eventual design of these materials. Some basic introduction to the theoretical and computational framework is provided to introduce the reader to the field, the techniques are in principle applicable to a wide range of other situations as well. Simulation results are directly compared to experimental data as far as possible.

Application of Ion Chromatography for the Reliable Quantification of Ammonium in Electrochemical Ammonia Synthesis Experiments: A Practical Guide.

Assessing novel electrocatalysts for the electrochemical ammonia synthesis (EAS) requires reliable quantitative trace analysis of electrochemically produced ammonia to infer activity and selectivity. This study concerns the development of an ion chromatography (IC) method for quantitative trace analysis of ammonium in 0.1 M sulfuric acid electrolyte, which is applied to EAS gas-diffusion electrode (GDE) experiments with commercial chromium nitride as electrocatalyst. The developed IC method is highly sensitive, versatile, and reliable, achieving a limit of quantification (LOQ) of 6 µg l-1 (6 ppbmol ) ammonium. The impacts of the sample matrix, dilution, and neutralization, as well as contamination, on the quantitative analysis by IC are analyzed. Experimental constraints result in an effective LOQ including dilution of 60 µg l-1 for the determination of ammonium in 0.1 M sulfuric acid electrolyte, owing to necessary sample dilution. The practical guide presented herein is intended to be very relevant for the field of EAS as a guideline and applicable to a broad range of catalyst systems and ion chromatography devices.

Combinatorial Screening of Cu-W Oxide-Based Photoanodes for Photoelectrochemical Water Splitting.

Metal oxide libraries for photoanodes for the oxygen evolution reaction (OER) were generated by printing a metal salt solution in an array layout, followed by calcination to yield 22 ternary metal oxide systems. The libraries included a ternary metal cation system based on CuWO4 with one out of eight transition or posttransition metal ions Cr, Mn, Fe, Co, Ni, Zn, Bi, and Ga in different overall atomic ratios. The photocatalyst libraries were screened by scanning photoelectrochemical microscopy for the highest anodic photocurrents. Array elements that showed promising performance were printed in another set of eight libraries with smaller increments of overall composition. Improved performance with respect to CuWO4 was found for Ga, Co, and Ni as the third element. A comparison of the most active composition of those arrays within one library showed the highest activity for Cu48Ga3W49Ox. Printing spots of identical composition (Cu48Ga3W49Ox, Cu44Ni9W47Ox, and Cu44Co9W47Ox) over a larger area facilitated further characterization by X-ray photoelectron spectroscopy ultraviolet photoelectron spectroscopy (UPS), X-ray diffraction, scanning electron microscopy, chopped light voltammetry, and scanning electrochemical microscopy for the OER. High and stable steady-state photocurrents were generated in a photoelectrochemical cell for all three electrodes even at a low constant bias voltage. The best overall photoanode composition Cu48Ga3W49Ox showed currents that were 36 times higher than the currents of the binary Cu50W50Ox system. Significant n-doping was found by UPS valence band spectra for Ga-containing materials.