RESUMO
A water-stable bimetallic Fe/Zr metal-organic framework [UiO-66(Fe/Zr)] for exceptional decontamination of arsenic in water was fabricated through a facile one-step strategy. The batch adsorption experiments revealed the excellent performances with ultrafast adsorption kinetics due to the synergistic effects of two functional centers and large surface area (498.33 m2/g). The absorption capacity of UiO-66(Fe/Zr) for arsenate [As(V)] and arsenite [As(III)] reached as high as 204.1 mg/g and 101.7 mg/g, respectively. Langmuir model was suitable to describe the adsorption behaviors of arsenic on UiO-66(Fe/Zr). The fast kinetics (adsorption equilibrium in 30 min, 10 mg/L As) and pseudo-second-order model implied the strong chemisorption between arsenic ions and UiO-66(Fe/Zr), which was further confirmed by DFT theoretical calculations. The results of FT-IR, XPS analysis and TCLP test demonstrated that arsenic was immobilized on the surface of UiO-66(Fe/Zr) through Fe/Zr-O-As bonds, and the leaching rates of the adsorbed As(III) and As(V) from the spent adsorbent were only 5.6% and 1.4%, respectively. UiO-66(Fe/Zr) can be regenerated for five cycles without obvious removal efficiency decrease. The original arsenic (1.0 mg/L) in lake and tap water was effectively removed in 2.0 hr [99.0% of As(III) and 99.8% of As(V)]. The bimetallic UiO-66(Fe/Zr) has great potentials in water deep purification of arsenic with fast kinetics and high capacity.
Assuntos
Arsênio , Poluentes Químicos da Água , Purificação da Água , Arsênio/química , Água , Cinética , Espectroscopia de Infravermelho com Transformada de Fourier , Purificação da Água/métodos , Adsorção , Poluentes Químicos da Água/químicaRESUMO
Binary metallic organic frameworks can always play excellent functions for pollutants removal. One binary MOFs, UiO-66(Fe/Zr)), was newly synthesized and applied to remove aquatic selenite (SeIV) and selenate (SeVI). The adsorption behaviors and mechanisms were investigated using batch experiments, spectroscopic analyses, and theoretical calculations (DFT). The characterization results showed that the material inherited the topological structure of UiO-66 and excellent thermal stability. The large specific surface area (467.52 m2/g) and uniform mesoporous structures of the synthesized MOFs resulted in fast adsorption efficiency and high adsorption capacity for selenium species. The adsorbent kept high adsorption efficiency in a wide pH range from 2 to 11 with good anti-interference ability. The maximum adsorption capacity for Se(IV) and Se(VI) reached as high as 196 mg/g at pH 3 and 258 mg/g at pH 5, respectively. The process was conformed to fit pseudo-second-order kinetics and Langmuir isotherm, and could be explained by the formation of Fe/Zr-O-Se bond on the material surface, which was interpreted by the results of XPS, FTIR and DFT calculation. The regeneration and TCLP experiments demonstrated that UiO-66(Fe/Zr) could be regenerated for five cycles without obvious decrease of efficiencies, and the leaching rate of the adsorbed Se(IV) and Se(VI) in the spent adsorbent were only 4.8% and 2.3%. More than 99% of original Se(IV) and Se(VI) in the lake and tap water samples (1.0 mg/L of Se) could be removed in 2.0 h.
Assuntos
Selênio , Poluentes Químicos da Água , Purificação da Água , Adsorção , Estruturas Metalorgânicas , Ácidos Ftálicos , Ácido Selênico , Ácido Selenioso , Selênio/química , Água/química , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Metal-organic frameworks (MOFs) have been widely applied for pollutants removal in water. However, the powdered MOFs are always suffered from aggregation during use and difficult collection after use. These problems discount their efficiency and inhibit their reusability. In this work, Zr-based MOF (UiO-66) was successfully imprisoned into a water-stable polyacrylonitrile (PAN) substrate by electrospinning. The containing UiO-66 hybrid membrane was confirmed by instrumental characterizations and its stability was also investigated by ICP-OES analysis. The obtained composite membrane can efficiently remove both arsenite (AsIII) and arsenate (AsV) from water under natural pH conditions. The adsorption kinetic fitted well with pseudo-second-order model and was dominated by chemisorption. Its adsorption isotherm can be described by Langmuir model. The maximal adsorption capacities of the hybrid membrane for As(V) and As(III) were 42.17 mg/g and 32.90 mg/g, respectively. Our results demonstrated that the MOFs-dispersed electrospun nanofiber membrane can greatly inherit the MOFs' original adsorption properties and exhibits good regenerability without loss of MOFs. Electrospinning is an effective and practical method for the preparation of MOFs hybrid membrane, which makes the composite very easy to be collected after use.
RESUMO
Plants from the genus Pyrola are widely distributed in North Temperate zone. The quinones, phenol glycosides, terpenoids, flavonoids and volatile oil compounds have been identified from these plants. The in vivo and in vitro studies have shown that the genus Pyrola plants exhibit a wide range of pharmacological properties, including antioxidant, antitumor, antibacterial, anti-ischemia and anti-inflammatory activities. Based on analysis of the literature of the genus Pyrola plant, this review summarized the research on chemical constituents, pharmacology and quality control in recent years which can provide evidences for further investigation on the genus Pyrola plants.
Assuntos
Compostos Fitoquímicos/farmacologia , Extratos Vegetais/farmacologia , Pyrola/química , Flavonoides/farmacologia , Glicosídeos/farmacologia , Fenóis/farmacologia , Óleos de Plantas/farmacologia , Controle de Qualidade , Quinonas/farmacologia , Terpenos/farmacologia , Compostos Orgânicos Voláteis/farmacologiaRESUMO
The push-pull effect (PPE) has been recognized as a deleterious contributor to fatal flight accidents. The purpose of the study was to establish a push-pull manoeuvre (PPM) simulation with a tri-axes centrifuge, studying the effect of this PPM on the +Gz tolerance, and to make this simulation suitable for pilot centrifuge training. The PPM was realized through pre-programmed acceleration profiles consisting of -1 Gz for 5 s followed by a +Gz plateau for 10 s. Relaxed +Gz tolerance recordings were obtained from 20 healthy male fighter aircraft pilots and 6 healthy male volunteers through exposure to pre-programmed profiles with and without previous -1 Gz exposure. A statistically significant decrease in +Gz tolerance was seen in all subjects after -1 Gz for 5 s exposure, 0.87 ± 0.13 G in the volunteer group and 0.95 ± 0.25 G in the pilot group. The ear opacity pulse as a +Gz tolerance endpoint criterion was sometimes found to be unreliable during the PPM experiments. The simulated PPM in this study elicited a PPE, which was obvious from the significant reduction in +Gz tolerance. The PPM profile appears useful to be included in centrifuge training.
Assuntos
Aceleração , Adaptação Fisiológica/fisiologia , Mãos/fisiologia , Hipergravidade , Movimento/fisiologia , Análise e Desempenho de Tarefas , Aeronaves , Centrifugação , Ecossistema , Humanos , Masculino , Adulto JovemRESUMO
Transfer cells (TCs) develop extensive wall ingrowths to facilitate enhanced rates of membrane transport. In Arabidopsis, TCs trans-differentiate from phloem parenchyma (PP) cells abutting the sieve element/companion cell complex in minor veins of foliar tissues and, based on anatomy and expression of SWEET sucrose uniporters, are assumed to play pivotal roles in phloem loading. While wall ingrowth deposition in PP TCs is a dynamic process responding to abiotic stresses such as high light and cold, the transcriptional control of PP TC development, including deposition of the wall ingrowths themselves, is not understood. PP TC development is a trait of vegetative phase change, potentially linking wall ingrowth deposition with floral induction. Transcript profiling by RNA-seq identified NAC056 and NAC018 (NARS1 and NARS2) as putative regulators of wall ingrowth deposition, while recent single cell RNA-seq analysis of leaf vasculature identified PP-specific expression of NAC056. Numerous membrane transporters, particularly of the UmamiT family of amino acid efflux carriers, were also identified. Collectively, these findings, and the recent discovery that wall ingrowth deposition is regulated by sucrose-dependent loading activity of these cells, provide new insights into the biology of PP TCs and their importance to phloem loading in Arabidopsis, establishing these cells as a key transport hub for phloem loading.
Assuntos
Proteínas de Arabidopsis/metabolismo , Arabidopsis/metabolismo , Floema/metabolismo , Proteínas de Arabidopsis/genética , Parede Celular/metabolismo , Proteínas de Membrana Transportadoras/metabolismo , Folhas de Planta/metabolismo , Análise de Sequência de RNA/métodosAssuntos
Medicina Aeroespacial , Cérebro/fisiologia , Hipergravidade , Oxigênio/fisiologia , Aceleração , Frequência Cardíaca , HumanosRESUMO
OBJECTIVE: To investigate the effect of allicin on the expression of α-smooth muscle actin (α-SMA) in airway smooth muscle cells (ASMC), and to evaluate the mechanism of allicin on inhibition of airway remodeling. METHODS: The human ASMCs were treated for 48 hours with 0, 2.5, 5.0, and 10.0 µmol/L allicin, respectively, and the total RNA and protein of the cells were collected. The mRNA expression of α-SMA was determined by real-time polymerase chain reaction (PCR) analysis. The protein expression of α-SMA and phosphorylation Smad1 (p-Smad1) were assessed by Western blotting analysis. RESULTS: After the treatment with allicin for 48 hours in a dose of 0, 2.5, 5.0, and 10.0 µmol/L respectively, the mRNA expression of α-SMA was down-regulated (0.543±0.121, 0.354±0.072, 0.223±0.058, and 0.191±0.034, respectively), with statistically significant difference among groups (all P<0.05), and the protein expression of α-SMA and p-Smad1 was also gradually down-regulated in a dose-dependent manner [α-SMA protein (grad value ratio): 0.96±0.02, 0.72±0.16, 0.54±0.11, and 0.31±0.14, respectively; p-Smad1 protein (grad value ratio): 0.94±0.03, 0.76±0.13, 0.62±0.11, and 0.43±0.12, respectively), with statistically significant difference among groups (all P<0.05). CONCLUSION: Allicin depresses the mRNA and protein expression of α-SMA, and inhibits p-Smad1 in a dose-dependent manner, thus interrupts the transforming growth factor-ß and Rho kinase signal pathway.