RESUMO
OBJECTIVE: The combination of interferon (IFN) and ribavirin (RBV) is the standard therapy for hepatitis C virus (HCV) infection. HCV genotype 2a has proved more amenable to the therapy, but its efficacy is yet limited. This study aimed to investigate the mechanism of the poor response in a case of HCV genotype 2a infection. METHODS: We analyzed dynamic change of HCV RNA from a patient, infected with HCV genotype 2a, showing a poor virological response to IFN/RBV as judged 12 weeks after initiation of the therapy by HCV clone sequencing. Then we constructed subgenomic Japanese fulminant hepatitis-1 (JFH1) replicon and different chimeric replicons with humanized Gaussia luciferase gene. The chimeric replicons were derived from subgenomic JFH1 replicon, in which the NS5A region was replaced by the patient's sequence from the pre/post-treatment, and the chimeric replicons' susceptibility to IFN were evaluated by relative Gausia Luciferase activity. RESULTS: The pretreatment HCV sequences appeared almost uniform, and the quasispecies variation was further more simplified after 12 weeks of therapy. Besides, the quasispecies variation seemed to be more diversified in the NS5A, relatively, a region crucial for IFN response, and each of chimeric replicons exhibited distinct response to IFN. CONCLUSIONS: During the course of the chronic infection, HCV population seems to be adapted to the patient's immunological system, and further to be selected by combination of IFN/RBV therapy, indicating quasispecies may completely eliminated by addition of other drugs with targets different from those of IFN. In addition, each different response of chimeric replicon to IFN is most likely related to amino acid changes in or near the IFN-sensitivity determining region (ISDR) of NS5A during chronic infection and IFN/RBV therapy.
RESUMO
Previous studies have shown that structure has a significant influence on the mechanical deformation of unsaturated loess, but there is little published information focused on the influence mechanism of microstructure and mesostructure on the mechanical properties of loess. In this paper, the unsaturated undisturbed loess and its remolded loess under the same physical condition were taken as the research objects. The unsaturated triaxial shear tests with constant suction and net confining pressure were carried out, and the microstructure differences between the two are compared by using SEM and CT scanning to reveal the influence of structure on strength characteristics. The test results show that the cohesion and internal friction angle of undisturbed loess are greater than those of remolded loess. The angle of undisturbed soil particles is obvious, and the particles are bracket contact with good cementation. The remolded loess particles are close to round shape, and the particles are inlaid contact with destroyed cementation. The average radius of undisturbed soil is higher than that of remolded soil, indicating that there are bracket pores in undisturbed soil, but the bracket structure and macropores are deformed during shear deformation, and good structural and cementation ensure the strength of loess specimens.
RESUMO
The mechanical properties of loess-steel interface are of great significance for understanding the residual strength and deformation of loess. However, the undisturbed loess has significant structural properties, while the remolded loess has weak structural properties. There are few reports on the mechanical properties of loess-steel interface from the structural point of view. This paper focused on the ring shear test between undisturbed loess as well as its remolded loess and steel interface under the same physical mechanics and test conditions (water content, shear rate and vertical pressure), and explored the influence mechanism of structure on the mechanical deformation characteristics of steel-loess interface. The results show that the shear rate has little effect on the residual strength of the undisturbed and remolded loess-steel interface. However, the water content has a significant influence on the residual strength of the loess-steel interface, moreover, the residual internal friction angle is the dominant factor supporting the residual strength of the loess-steel interface. In general, the residual strength of the undisturbed loess-steel interface is greater than that of the remolded loess specimen (for example, the maximum percentage of residual strength difference between undisturbed and remolded loess specimens under the same moisture content is 6.8%), which is because that compared with the mosaic arrangement structure of the remolded loess, the overhead arrangement structure of the undisturbed loess skeleton particles makes the loess particles on the loess-steel interface re-adjust the arrangement direction earlier and reach a stable speed relatively faster. The loess particles with angular angles in the undisturbed loess make the residual internal friction between the particles greater than the smoother particles of the remolded loess (for example, the maximum percentage of residual cohesion difference between undisturbed and remolded loess specimens under the same vertical pressure is 4.29%), and the intact cement between undisturbed loess particles brings stronger cohesion than the remolded loess particles with destroyed cement (for example, the maximum difference percentage of residual cohesion between undisturbed and remolded soil specimens under the same vertical pressure is 33.80%). The test results provide experimental basis for further revealing the influence mechanism of structure, and parameter basis for similar engineering construction.
Assuntos
Resistência ao Cisalhamento/fisiologia , Solo/química , Aço/química , Fenômenos Biomecânicos/fisiologia , China , Força Compressiva/fisiologia , Indústria da Construção , Materiais de Construção , Geografia , Humanos , Fenômenos Mecânicos , Estresse Mecânico , Propriedades de Superfície , Água/químicaRESUMO
BACKGROUND: As an autoimmune systemic disorder, rheumatoid arthritis (RA) features chronic inflammation as well as synovial infiltration of immune cells. This study was designed with the purpose of discussing the hidden mechanism of SPTBN1 and exploring favorable molecular-targeted therapies. METHODS: With the application of RT-qPCR and western blot, the expressions of SPTBN1 and PIK3R2 before or after transfection were estimated. Besides, Cell Counting Kit-8, Edu, wound healing, transwell, enzyme-linked immunosorbent assay, and TUNEL were adopted for the evaluation of the viability, proliferation, migration, invasion, inflammatory response, and apoptosis of fibroblast-like synoviocyte (FLS). In addition, the interaction of SPTBN1 and PIK3R2 was testified by applying immunoprecipitation (IP) and western blot was utilized for the assessment of migration-, apoptosis-, and PI3K/AKT signal-related proteins. RESULTS: It was discovered that SPTBN1 declined in RA synovial cells and its overexpression repressed the proliferation, migration, invasion, and inflammation of RA-FLSs but promoted apoptosis. IP confirmed that SPTBN1 could bind to PIK3R2 in FLSs. To further figure out the hidden mechanism of SPTBN1 in RA, a series of functional experiments were carried out and the results demonstrated that the reduced expressions of MMP2, MMP9, IL-8, IL-1ß, IL-6, and Bcl2 as well as increased levels of Bax and cleaved caspase3 in SPTBN1-overexpressed RA-FLSs were reversed by PIK3R2 depletion, revealing that SPTBN1 repressed the migration and inflammation and promoted the apoptosis of RA-FLSs via binding to PIK3R2. Results obtained from western blot also revealed that PIK3R2 interference ascended the contents of p-PI3K and p-AKT in SPTBN1-overexpressed RA-FLSs, implying that SPTBN1 repressed PI3K/AKT signal in RA via PIK3R2. DISCUSSION: SPTBN1 alleviated the proliferation, migration, invasion, and inflammation in RA via interacting with PIK3R2.
Assuntos
Artrite Reumatoide , Doenças Autoimunes , Humanos , Fosfatidilinositol 3-Quinases , Proteínas Proto-Oncogênicas c-akt , Fatores de Transcrição , Inflamação , Proliferação de Células , EspectrinaRESUMO
AIM: To construct the fusion gene of Hsp65 of Mycobacterium tuberculosis H37Rv and enhanced green fluorescence protein (EGFP) and prepare dendritic cell (DC) vaccine. METHODS: Hsp65 DNA amplified by PCR was cloned into eukaryotic expression vector EGFP-C1. The recombinant plasmid pEGHsp65 was subsequently transfected into Hela cells, and the transfection rate was determined under confocal laser scanning fluorescence microscope at different times. RT-PCR was used to detect the expression of Hsp65 mRNA in Hela cells. The GM-CSF and IL-4 induced DCs from mouse bone marrow cells were transfected with recombinant plasmid pEGHsp65. Proliferation of unprimed splenocytes activated by transfected DCs was detected by MTT colorimetry. RESULTS: Restrictive enzyme digestion analysis (EcoR I, Bgl II) confirmed that Hsp65 DNA had been inserted into the vector pEGFP-C1. The recombinant plasmid pEGHsp65 was transfected into Hela cells and the expression of the fusion gene reached peak at the 48 hours after transfection. Expression of Hsp65 mRNA was detected in Hela cells by RT-PCR. DCs transfected with pEGHsp65 could stimulate the proliferation of unprimed splenocytes. CONCLUSION: The pEGHsp65 fusion gene was successfully constructed and DCs transfected with the pEGHsp65 might be a candidate vaccine for tuberculosis.