CSF disturbances and other neurosurgical complications after interdisciplinary reconstructions of large combined scalp and skull deficiencies.

Combined scalp and skull deficiency due to malignant scalp tumors or sequelae of intracranial surgery present challenging entities for both neurosurgeons and reconstructive treatment. In complex cases, an interdisciplinary approach is needed between neurosurgeons and cranio-maxillofacial surgeons. We present a considerably large series for which we identify typical complications and pitfalls and provide evidence for the importance of an interdisciplinary algorithm for chronic wound healing complications and malignomas of the scalp and skull. We retrospectively reviewed all patients treated by the department of neurosurgery and cranio-maxillofacial surgery at our hospital for complex scalp deficiencies and malignant scalp tumors affecting the skull between 2006 and 2019, and extracted data on demographics, surgical technique, and perioperative complications. Thirty-seven patients were treated. Most cases were operated simultaneously (n: 32) and 6 cases in a staged procedure. Nineteen patients obtained a free flap for scalp reconstruction, 15 were treated with local axial flaps, and 3 patients underwent full thickness skin graft treatment. Complications occurred in 62% of cases, mostly related to cerebrospinal fluid (CSF) circulation disorders. New cerebrospinal fluid (CSF) disturbances occurred in 8 patients undergoing free flaps and shunt dysfunction occurred in 5 patients undergoing local axial flaps. Four patients died shortly after the surgical procedure (perioperative mortality 10.8%). Combined scalp and skull deficiency present a challenging task. An interdisciplinary treatment helps to prevent severe and specialty-specific complications, such as hydrocephalus. We therefore recommend a close neurological observation after reconstructive treatment with focus on symptoms of CSF disturbances.

Development of a template tool for facilitating fibula osteotomy in reconstruction of mandibular defects by digital analysis of the human mandible.

OBJECTIVES: Mandibular reconstruction after segmental mandibulectomy can be challenging without virtual surgical planning and osteotomy guides. The purpose of this study was to analyze anatomic parameters to facilitate the evaluation of ideal fibula wedge osteotomies to reconstruct the neomandibula in a simple and cost-effective manner without the need for preoperative virtual planning. MATERIALS AND METHODS: Computed tomography scans were acquired from randomly selected patients, and all images were obtained from routine clinical diagnostics, e.g., tumor staging, or preoperatively before reconstruction. Data was used to calculate stereolithographic models of the mandible for length and angle measurements. Statistical analysis was performed (p < 0.05). RESULTS: CT scans of 100 patients were analyzed: 39 were female and 61 were male patients, mean age was 59.08a. The mandibular arch angle proved to be constant with 241.07 ± 2.39°. The outside B-segment length was 80.05 ± 5.16 mm; the anterior S-segment length was 27.69 ± 3.16 mm. The angle of the mandibular arch showed differences in means (p = 0.004) between age groups, but effect was proved low. No relevant statistical significances were detected. CONCLUSIONS: The development of a mandible reconstruction template tool would benefit the majority of head and neck patients, which is due to a constant mandibular arch angle and symphysis segment length throughout the general patient population, allowing the mimicking of a harmonic mandibular arch with up to three fibula segments. CLINICAL RELEVANCE: The developed mandible reconstruction template tool can facilitate the fibula wedge osteotomies necessary for reconstruction of an ideal neomandibula providing a novel approach which is simple and cost-effective.

Comparative 3D micro-CT and 2D histomorphometry analysis of dental implant osseointegration in the maxilla of minipigs.

AIM: The bone implant contact (BIC) has traditionally been evaluated with histological methods. Thereupon, strong correlations of two-dimensional (2D) BIC have been detected between µCT and destructive histology. However, due to the high intra-sample variability in BIC values, one histological slice is not sufficient to represent 3D BIC. Therefore, our aim has been to correlate the averaged values of 3-4 histological sections to 3D µCT. MATERIAL AND METHODS: Fifty-four implants inserted into the maxilla of 14 minipigs were evaluated. Two different time points were selected to assess the 3D BIC (distance to implant: 2-5 voxels), an inner ring (6-30 voxels) and an outer ring (55-100 voxels) using µCT (voxel size: 10 µm) and to correlate the values to histomorphometry. RESULTS: Strong correlations (p < 0.0001; 28 days, 56 days, total) were seen between µCT and histomorphometry concerning BIC (r = 0.84, r = 0.85, r = 0.83), the inner ring (r = 0.87, r = 0.87, r = 0.88) and the outer ring (r = 0.85, r = 0.85, r = 0.88). Closer to the implant, µCT values were higher compared with histomorphometry. CONCLUSION: Although 3-4 histological slices per implant seem to predict the 3D BIC, µCT might be advantageous because of its non-destructive 3D character. The healing time may not impact on the comparability.

Extended orbital exenteration, epithetic restoration, and patient supply: A cross-sectional study of a historic cohort.

BACKGROUND: The aim of this study was to investigate the clinical course and to redefine an optimized algorithm for OE cases until epithetic restoration. METHODS: Indication, defect type according to Kesting, reconstructive technique, incidence of postoperative complications and peri-implantitis, patients' quality of life, timing of periorbital implant insertion, incidence of and interval to implant loss, and time until epithetic restoration were analyzed in 43 patients. RESULTS: A significant correlation was detected between wound dehiscence and defect type. Out of 24 patients, 7 were implanted secondarily with a median time interval of 399 days (270-2015) after OE. Eleven out of 83 placed implants were lost in 8 patients with a median time interval of 586 days (264-4485) after insertion. The majority of epithesis carriers had no or few restrictions in their quality of life. CONCLUSIONS: We recommend our modified treatment algorithm to further improve and shorten the clinical course.

Oral rehabilitation and associated quality of life following mandibular reconstruction with free fibula flap: a cross-sectional study.

Introduction: Mandibular reconstruction with the free fibula flap (FFF) has become a standardized procedure. The situation is different with oral rehabilitation, so the purpose of this study was to investigate the frequency of implant placement and prosthetic restoration. Additionally, the patients' situation, motivation, and treatment course were structurally assessed. Materials and methods: All cases between January 2013 and December 2018 that underwent mandibular reconstruction in our department with a free fibula flap and gave written informed consent to participate were interviewed with two structured questionnaires about their restoration and quality of life. Additionally, medical records, general information, status of implants and therapy, and metric analyses of the inserted implants were performed. Results: In total 59 patients were enrolled and analyzed in this monocentric study. Overall, oral rehabilitation was achieved in 23.7% at the time of investigation. In detail, implants were inserted in 37.3% of patients and showed an 83.3% survival of dental implants. Of these implanted patients, dental implants were successfully restored with a prosthetic restoration in 63.6. Within this subgroup, satisfaction with the postoperative aesthetic and functional result was 79.9% and with the oral rehabilitation process was 68.2%. Satisfaction with the implant-borne prosthesis was 87.5%, with non-oral-squamous-cell-carcinoma patients being statistically significantly more content with the handling (p=0.046) and care (p=0.031) of the prosthesis. Discussion: Despite the well-reconstructed bony structures, there is a need to increase the effort of achieving oral rehabilitation, especially looking at the patient's persistent motivation for the procedure.

Comparison of T1/2 Tongue Carcinoma with or without Radial Forearm Flap Reconstruction Regarding Post-Therapeutic Function, Survival, and Gender.

BACKGROUND: Flap reconstruction is commonly used in advanced tongue carcinoma in order to compensate for the loss of tongue tissue and function. Surprisingly, a large number of reconstructed early-stage tongue cancer can be found. Survival or functional benefits in these cases remain unclear. METHODS: A retrospective data analysis of 384 surgically treated tongue carcinoma patients was conducted aiming to find epidemiologic and survival differences between patients with (n = 158) or without flap reconstruction (n = 226). A prospective functional analysis was performed on 55 early-stage tongue cancer patients, 33 without and 22 with radial-forearm flap reconstruction, focusing on post-therapeutic swallowing function as the primary endpoint, speech as the secondary endpoint, xerostomia, quality of life, and mouth opening. RESULTS: Consistent with the current literature, we demonstrated the significantly more frequent use of flap grafts in advanced tongue carcinomas. For the first time, we depicted a higher female ratio in the reconstructed group (p = 0.02). There were no significant differences in survival or functional outcomes between the groups. The none-reconstructed group showed more frequent use of adjuvant C/RT despite presenting fewer N+ stages. CONCLUSIONS: The higher female ratio in the reconstruction group is plausible due to the anatomically smaller oral cavity and relatively larger carcinoma in women. A higher presence of close margins in the none-reconstruction group may explain the more frequent use of adjuvant C/RT. Since we found no survival or functional differences between the groups, we propose a critical approach toward flap reconstruction in T1/2 tongue carcinoma. At the same time, proportional aspects and adequate resection margins should be taken into account.

Mandibular reconstructions with free fibula flap using standardized partially adjustable cutting guides or CAD/CAM technique: a three- and two-dimensional comparison.

Background: Mandibular reconstruction with the fibula free flap (FFF) is performed freehand, CAD/CAM-assisted, or by using partially adjustable resection/reconstruction aids. The two latter options represent the contemporary reconstructive solutions of the recent decade. The purpose of this study was to compare both auxiliary techniques with regard to feasibility, accuracy, and operative parameters. Methods and materials: The first twenty consecutively operated patients requiring a mandibular reconstruction (within angle-to-angle) with the FFF using the partially adjustable resection aids between January 2017 and December 2019 at our department were included. Additionally, matching CAD/CAM FFF cases were used as control group in this cross-sectional study. Medical records and general information (sex, age, indication for surgery, extent of resection, number of segments, duration of surgery, and ischemia time) were analyzed. In addition, the pre- and postoperative Digital Imaging and Communications in Medicine data of the mandibles were converted to standard tessellation language (.stl) files. Conventional measurements - six horizontal distances (A-F) and temporo-mandibular joint (TMJ) spaces - and the root mean square error (RMSE) for three-dimensional analysis were measured and calculated. Results: In total, 40 patients were enrolled (20:20). Overall operation time, ischemia time, and the interval between ischemia time start until end of operation showed no significant differences. No significant difference between the two groups were revealed in conventional measurements of distances (A-D) and TMJ spaces. The Δ differences for the distance F (between the mandibular foramina) and the right medial joint space were significantly lower in the ReconGuide group. The RMSE analysis of the two groups showed no significant difference (p=0.925), with an overall median RMSE of 3.1 mm (2.2-3.7) in the CAD/CAM and 2.9 mm (2.2-3.8) in the ReconGuide groups. Conclusions: The reconstructive surgeon can achieve comparable postoperative results regardless of technique, which may favor the ReconGuide use in mandibular angle-to-angle reconstruction over the CAD/CAM technique because of less preoperative planning time and lower costs per case.

Superficial Temporal Artery and Vein as Alternative Recipient Vessels for Intraoral Reconstruction With Free Flaps to Avoid the Cervical Approach With the Resulting Need for Double Flap Transfer in Previously Treated Necks.

Background: Microvascular reconstruction remains challenging in previously operated and irradiated patients, especially when double flaps seem to be the only solution due to osteoradionecrosis. An alternative reconstructive option could be microvascular anastomosis to the temporal vessels to avoid the obligatory cervical incision. Methods and Materials: All consecutive cases between January 2013 and 2020 that underwent either mandibular resection and reconstruction with a free fibula flap (FFF) and another soft tissue flap (group I) or pure intraoral resection and reconstruction with an FFF or radial forearm flap (RFF) with temporal microvascular anastomosis (group II) were included. Patients' general information, indication and extent of surgery, time of ischemia, time of total surgery, and duration of hospital stay as well as incidence of complications were retrospectively recorded and analyzed. Results: Seventeen (group I) and 11 (group II) cases were included. In group I, FFF was combined with RFF (n = 9), anterolateral thigh flap (ALT, n = 7), or latissimus dorsi flap (n = 1). Group II consisted of six FFFs and five RFFs. Operation time and hospitalization duration were significantly shorter in group II (p < 0.001 and p = 0.025), whereas ischemic time of FFF was significantly shorter in group I (p = 0.002). All patients in group I required a tracheostomy, while only four cases in group II did (p = 0.004). The complication rate regarding hematoma removal, revision of anastomosis, flap loss, delirium, sepsis, pleural effusion, pneumonia, and pulmonary artery embolism showed no significant differences between the two groups. Conclusions: The superficial temporal vessels served as versatile recipient vessels for intraoral mandibular and soft tissue reconstruction and led to reduced operation time, hospitalization duration, and indication for a primary tracheostomy. Thus, this approach may help to avoid cervical incision for reconstruction in irradiated patients.

Fluorescence-guided bone resection in bisphosphonate-related osteonecrosis of the jaws: first clinical results of a prospective pilot study.

PURPOSE: Surgical debridement is the therapy of choice in advanced stages of bisphosphonate-related osteonecrosis of the jaws (BRONJ). However, the therapy is currently only loosely standardized because no suitable imaging modalities exist. This study aims to redress this by exploring the suitability and reproducibility of applying a fluorescence-guided bone resection to patients with BRONJ. PATIENTS AND METHODS: This prospective pilot study comprised 15 patients with 20 BRONJ lesions (only stages II and III) with a history of intravenous bisphosphonate treatment for metastatic bone diseases. Before surgical treatment, each patient received a 10-day administration of doxycycline. Fluorescence-guided resection of necrotic bone was performed by means of a certified fluorescence lamp. Success of the procedure was proclaimed if mucosal closure was observed and symptoms were absent 4 weeks postoperatively. RESULTS: The 4-week postoperative follow-up identified a mucosal closure in 17 of 20 BRONJ lesions (85%). These patients were free of any symptoms. Failure as defined by mucosal dehiscence and exposed bone was observed in 3 of 20 BRONJ lesions (15%). CONCLUSION: The success rate of this surgical regimen of BRONJ was respectable, and thus fluorescence-guided bone resection can be considered an effective treatment for stage II and stage III BRONJ. Furthermore, the reproducibility of the technique offers an opportunity to standardize the surgical therapy. Further studies are called for that compare the fluorescence-guided bone resection with conventional surgical approaches, as well as surgical versus conservative treatment in the early stages (stages 0 and I) of BRONJ.

Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT).

The aim of this study is to evaluate the accuracy of a surgical template-aided implant placement produced by rapid prototyping using a DICOM dataset from cone beam computer tomography (CBCT). On the basis of CBCT scans (Sirona® Galileos), a total of ten models were produced using a rapid-prototyping three-dimensional printer. On the same patients, impressions were performed to compare fitting accuracy of both methods. From the models made by impression, templates were produced and accuracy was compared and analyzed with the rapid-prototyping model. Whereas templates made by conventional procedure had an excellent accuracy, the fitting accuracy of those produced by DICOM datasets was not sufficient. Deviations ranged between 2.0 and 3.5 mm, after modification of models between 1.4 and 3.1 mm. The findings of this study suggest that the accuracy of the low-dose Sirona Galileos® DICOM dataset seems to show a high deviation, which is not useable for accurate surgical transfer for example in implant surgery.

X-ray dark-field tomography reveals tooth cracks.

Cracked tooth syndrome (CTS) is a common clinical finding for teeth, it affects about 5% of all adults each year. The finding of CTS is favored by several risk factors such as restorations, bruxism, occlusion habits, and age. Treatment options range, depending on the severity, from no treatment at all to tooth extraction. Early diagnosis of CTS is crucial for optimal treatment and symptom reduction. There is no standard procedure for an evidence-based diagnosis up to date. The diagnosis is a challenge by the fact that the symptoms, including pain and sensitivity to temperature stimuli, cannot be clearly linked to the disease. Commonly used visual inspection does not provide in-depth information and is limited by the resolution of human eyes. This can be overcome by magnifying optics or contrast enhancers, but the diagnosis will still strongly rely on the practicians experience. Other methods are symptom reproduction with percussions, thermal pulp tests or bite tests. Dental X-ray radiography, as well as computed tomography, rarely detect cracks as they are limited in resolution. Here, we investigate X-ray dark-field tomography (XDT) for the detection of tooth microcracks. XDT simultaneously detects X-ray small-angle scattering (SAXS) in addition to the attenuation, whereas it is most sensitive to the micrometer regime. Since SAXS originates from gradients in electron density, the signal is sensitive to the sample morphology. Microcracks create manifold interfaces which lead to a strong signal. Therefore, it is possible to detect structural changes originating from subpixel-sized structures without directly resolving them. Together with complementary attenuation information, which visualizes comparatively large cracks, cracks are detected on all length-scales for a whole tooth in a non-destructive way. Hence, this proof-of principle study on three ex-vivo teeth shows the potential of X-ray scattering for evidence-based detection of cracked teeth.

In-House, Open-Source 3D-Software-Based, CAD/CAM-Planned Mandibular Reconstructions in 20 Consecutive Free Fibula Flap Cases: An Explorative Cross-Sectional Study With Three-Dimensional Performance Analysis.

BACKGROUND: Mandibular reconstruction is conventionally performed freehand, CAD/CAM-assisted, or by using partially adjustable resection aids. CAD/CAM-assisted reconstructions are usually done in cooperation with osteosynthesis manufacturers, which entails additional costs and longer lead time. The purpose of this study is to analyze an in-house, open-source software-based solution for virtual planning. METHODS AND MATERIALS: All consecutive cases between January 2019 and April 2021 that underwent in-house, software-based (Blender) mandibular reconstruction with a free fibula flap (FFF) were included in this cross-sectional study. The pre- and postoperative Digital Imaging and Com munications in Medicine (DICOM) data were converted to standard tessellation language (STL) files. In addition to documenting general information (sex, age, indication for surgery, extent of resection, number of segments, duration of surgery, and ischemia time), conventional measurements and three-dimensional analysis methods (root mean square error [RMSE], mean surface distance [MSD], and Hausdorff distance [HD]) were used. RESULTS: Twenty consecutive cases were enrolled. Three-dimensional analysis of preoperative and virtually planned neomandibula models was associated with a median RMSE of 1.4 (0.4-7.2), MSD of 0.3 (-0.1-2.9), and HD of 0.7 (0.1-3.1). Three-dimensional comparison of preoperative and postoperative models showed a median RMSE of 2.2 (1.5-11.1), MSD of 0.5 (-0.6-6.1), and HD of 1.5 (1.1-6.5) and the differences were significantly different for RMSE (p < 0.001) and HD (p < 0.001). The difference was not significantly different for MSD (p = 0.554). Three-dimensional analysis of virtual and postoperative models had a median RMSE of 2.3 (1.3-10.7), MSD of -0.1 (-1.0-5.6), and HD of 1.7 (0.1-5.9). CONCLUSIONS: Open-source software-based in-house planning is a feasible, inexpensive, and fast method that enables accurate reconstructions. Additionally, it is excellent for teaching purposes.

Improving mandibular reconstruction by using topology optimization, patient specific design and additive manufacturing?-A biomechanical comparison against miniplates on human specimen.

In this study, topology optimized, patient specific osteosynthesis plates (TOPOS-implants) are evaluated for the mandibular reconstruction using fibula segments. These shape optimized implants are compared to a standard treatment with miniplates (thickness: 1.0 mm, titanium grade 4) in biomechanical testing using human cadaveric specimen. Mandible and fibula of 21 body donors were used. Geometrical models were created based on automated segmentation of CT-scans of all specimens. All reconstructions, including cutting guides for osteotomy as well as TOPOS-implants, were planned using a custom-made software tool. The TOPOS-implants were produced by electron beam melting (thickness: 1.0 mm, titanium grade 5). The fibula-reconstructed mandibles were tested in static and dynamic testing in a multi-axial test system, which can adapt to the donor anatomy and apply side-specific loads. Static testing was used to confirm mechanical similarity between the reconstruction groups. Force-controlled dynamic testing was performed with a sinusoidal loading between 60 and 240 N (reconstructed side: 30% reduction to consider resected muscles) at 5 Hz for up to 5 · 105 cycles. There was a significant difference between the groups for dynamic testing: All TOPOS-implants stayed intact during all cycles, while miniplate failure occurred after 26.4% of the planned loading (1.32 · 105 ± 1.46 · 105 cycles). Bone fracture occurred in both groups (miniplates: n = 3, TOPOS-implants: n = 2). A correlation between bone failure and cortical bone thickness in mandible angle as well as the number of bicortical screws used was demonstrated. For both groups no screw failure was detected. In conclusion, the topology optimized, patient specific implants showed superior fatigue properties compared to miniplates in mandibular reconstruction. Additionally, the patient specific shape comes with intrinsic guiding properties to support the reconstruction process during surgery. This demonstrates that the combination of additive manufacturing and topology optimization can be beneficial for future maxillofacial surgery.

Tetracycline bone fluorescence: a valuable marker for osteonecrosis characterization and therapy.

PURPOSE: Differential diagnosis of osteoradionecrosis and bisphosphonate-related osteonecrosis of the jaw is primarily based on medical history, rather than pathogenesis or histopathology. This report aims to redress this shortcoming by demonstrating the advantages of tetracycline bone fluorescence as an aid to characterize osteonecrosis entities according to differential histopathologies. Furthermore, this technique facilitates the means to determine extent of necrosis and to optimize surgical therapy. PATIENTS AND METHODS: Two patients with extended osteonecrosis of the lower jaw (osteoradionecrosis or bisphosphonate-related osteonecrosis of the jaw) were treated with partial mandibulectomy. After preoperative administration of doxycycline for 10 days, bone fluorescence was monitored intraoperatively to determine the resection boundaries. RESULTS: Fluorescence analysis correlated well with the specific histopathologic features of the 2 osteonecrosis entities. Bone fluorescence was predominantly observed in the cortical bone and cancellous bone regions in osteoradionecrosis and bisphosphonate-related osteonecrosis of the jaw, respectively. Margins of the osteonecrosis (and the resection) could be determined under fluorescence guidance; however, bone bleeding did not correlate with bone fluorescence in both osteonecrosis entities. CONCLUSIONS: Given that viable but not necrotic bone displays tetracycline fluorescence, a notion that reflects the histopathology, more precise characterization of the 2 osteonecrosis types is enabled. Furthermore, even in extended cases of osteonecrosis requiring partial mandibulectomy, bone fluorescence helps to pinpoint the margins of resection and thus signifies an improvement of surgical therapy of extended osteonecrosis.

Fluorescence-guided bone resection in bisphosphonate-associated osteonecrosis of the jaws.

PURPOSE: To date, the therapy of bisphosphonate-associated osteonecrosis of the jaws (BONJ) has been hampered by the lack of imaging modalities that enable the extent of necrosis to be visualized. This study aims to demonstrate the feasibility of tetracycline fluorescence guided bone resection in the surgical management of BONJ. PATIENTS AND METHODS: Following a 10-day preoperative administration of doxycycline in patients suffering from BONJ, sufficient doxycycline is incorporated into viable bone to be visualized with a certified medical lamp emitting exciting light at 400 to 460 nm. RESULTS: Viable and necrotic bone can be discriminated intraoperatively in a routine and reproducible manner by doxycycline bone fluorescence. CONCLUSION: In the therapy of BONJ, conservative concepts are to be favored. The fact that necrotic bone can now be selectively resected signifies an improvement of the conservative surgical therapy of BONJ.

A Standard Algorithm for Reconstruction of Scalp Defects With Simultaneous Free Flaps in an Interdisciplinary Two-Team Approach.

Reconstructions of complex scalp after ablative resection or by post-traumatic tissue loss, can present difficulties regarding recipient vessel selection, functional, and aesthetic outcome. The harvesting method for many microvascular free flaps requires a need for changing patients position during surgery and makes a simultaneous interdisciplinary two-team approach complicated, which is a major disadvantage regarding safety and operation time. The ideal flap for scalp reconstruction has yet to be described, although the microvascular latissimus dorsi flap is frequently referred to as the first choice in this context, especially after resection of large defects. The purpose of this study is to compare two different microvascular free flaps for a simultaneous scalp reconstruction in an interdisciplinary two-team approach applying a standardized algorithm. All consecutively operated complex scalp defects after ablative surgery from April 2017 until August 2018 were included in this retrospective study. The indications were divided into neoplasm or wound healing disorder. Two microvascular flaps (latissimus dorsi or parascapular flap) were used to cover the soft tissue component of the resulting defects. Seventeen patients met the inclusion criterion and were treated in an interdisciplinary two-team approach. Skull reconstruction with a CAD/CAM implant was performed in 10 cases of which four were in a secondary stage. Nine patients received a parascapular flap and eight patients were treated with latissimus dorsi flap with split thickness skin graft. Anastomosis was performed with no exception to the temporal vessels. One parascapular flap had venous insufficiency after 1 week followed by flap loss. One latissimus dorsi flap had necrosis of the serratus part of the flap. All other flaps healed uneventful and could be further treated with adjuvant therapy or CAD/CAM calvarial implants. Regarding overall complications, flap related complications, flap loss, and inpatient stay no statistical differences were seen between the diagnosis or type of reconstruction. The parascapular flap seems to be a good alternative for reconstruction of complex tumor defects of the scalp besides the latissimus dorsi flap. Stable long-term results and little donor site morbidity are enabled with good aesthetic outcomes and shorter operation time in an interdisciplinary two-team approach.

Temporary tracheotomy in microvascular reconstruction in maxillofacial surgery: Benefit or threat?

BACKGROUND: Temporary tracheotomies are often used in oral microvascular flap reconstruction surgery to secure postoperative airway management and avoid emergency tracheotomies. Even when planned electively, a tracheotomy can cause severe and life-threatening complications. The aim of this study was to evaluate the complications of tracheotomies performed on oral cancer patients with microvascular flap reconstructions and differentiated patterns, which could lead to postoperative complications. METHODS: 150 patients, treated in the Department of Oral and Maxillofacial Surgery from March 2017 to August 2018, were included in this study. Patient records and perioperative data were analysed and the following specific items were evaluated: time after surgery until removal of the tracheal cannula, complications, cause and point of time of reinsertion of the cannula, anticoagulative treatment, ASA grade (American Society of Anaesthesiologists), TNM stage, and patient-specific data. RESULTS: 30 patients (20%) developed tracheotomy-associated complications, most commonly pneumonia (50%). There was a significant correlation between the time period until removal of the cannula and the occurrence of complications such as pneumonia and bleeding. CONCLUSION: The results of our study lead us to recommend continuing to perform temporary tracheotomies in oral cancer surgery with microvascular flap reconstruction. The overall complication rate is low and postoperative airway management can be performed in a safe and controlled manner. Nevertheless, the time period for the inserted cannula should be kept as short as possible.

Development of a novel resection and cutting guide for mandibular reconstruction using free fibula flap.

INTRODUCTION: The authors developed a semi-standardised resection and cutting guide for mandibular reconstruction with free fibula flap based on data of mandible sizes and angles. METHODS: After analyzing the angles and lengths of mandibular angles and segments on computer tomography, a partly-adjustable resection guide for the mandible and cutting guide for the fibula were designed. RESULTS: After testing and optimizing the guides on plastic models and cadavers, the guides were successfully used for mandible resection and reconstruction with free fibula flap in 8 patients with segmental mandibulectomy. Application of the cutting and resection guides and functional results like occlusion and aesthetic appearence were satisfactory in all cases. CONCLUSIONS: The developed semi-standardised device is a helpful instrument for facilitating reconstruction of segmental mandibular defects with free fibula flaps. No extensive preoperative preparation and 3D printing is necessary which can avoid additional costs for virtual planning. Especially for lower budget health systems this can be an alternative to virtual planning.

Surgical management of severe osteoradionecrosis of the mandibular bone by using double free flap reconstruction.

PURPOSE: Osteoradionecrosis (ORN) of the jaws represents one of the most severe complications after primary or adjuvant radiation therapy (RT) of large head and neck tumors. In advanced ORN cases, surgical management is generally considered the therapy of choice. However, in several severe ORN patients with extensive bone and soft tissue defects, functional and aesthetic reconstruction represents a huge challenge for any surgeon, with an increased risk of post-operative wound healing disorders. Our aim here was to perform a double free flap technique as a therapeutic option in this difficult patient collective and to evaluate the post-operative outcome. MATERIALS AND METHODS: 15 patients with advanced and severe ORN undergoing mandibular and soft tissue reconstruction with a double free flap were retrospectively reviewed. In one single operation involving a three-team approach, an obligatory free fibular flap (FFF) was freely combined with another free flap according to the desired features: anterolateral thigh (ALT) or vastus lateralis flap (VLF), radial forearm flap (RFF) and latissimus dorsi flap (LDF). RESULTS: We found sufficient wound healing in the head and neck region in all patients with no need for any additional surgical intervention. The overall flap success rate was 93.3%, although three revisions of anastomosis were necessary. Furthermore, prolonged stay on the intensive care unit (ICU) and extended hospitalisation were avoided. CONCLUSION: The double free flap technique with an obligatory FFF provides a suitable surgical solution for the treatment of patients with severe ORN of the mandibular bone for which other conservative or surgical therapy strategies have reached their limits.

Evaluation of a computed-tomography-based assessment scheme in treatment decision-making for isolated orbital floor fractures.

INTRODUCTION: Treatment decisions for fractures of the orbital floor are based on clinical appearance, ophthalmological examination, and computed tomography (CT) scans. In extensive fractures, decisions are easily made between conservative and surgical treatment. However, objective parameters are rare in inconclusive cases. MATERIALS AND METHODS: Our retrospective study included 106 patients with unilateral isolated orbital floor fractures. Correlations between preoperative ophthalmological examinations and specific CT parameters were performed. RESULTS: The defect size of the fracture appeared to be significantly associated with the presence of diplopia. CT-morphological parameters and preoperative ophthalmological results showed statistical significance for diplopia and incarceration of inferior rectus muscle (IRM), diplopia and displacement of IRM, decreased mobility and incarceration of IRM, and decreased mobility and displacement of IRM. DISCUSSION: Our clinical assessment scheme for CT scans of orbital floor fractures is aimed at facilitating treatment decision making using four CT-based variables. As critical size defects of the orbital floor of ≥2 cm2 are likely to cause clinically significant posterior displacement of the globe, resulting in enophthalmos, the proposed parameters offer a readily accessible and easy to evaluate scheme that helps to identify patients in need of surgical intervention.