Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent.

Owing to rapid development in their efficiency1 and stability2, perovskite solar cells are at the forefront of emerging photovoltaic technologies. State-of-the-art cells exhibit voltage losses3-8 approaching the theoretical minimum and near-unity internal quantum efficiency9-13, but conversion efficiencies are limited by the fill factor (<83%, below the Shockley-Queisser limit of approximately 90%). This limitation results from non-ideal charge transport between the perovskite absorber and the cell's electrodes5,8,13-16. Reducing the electrical series resistance of charge transport layers is therefore crucial for improving efficiency. Here we introduce a reverse-doping process to fabricate nitrogen-doped titanium oxide electron transport layers with outstanding charge transport performance. By incorporating this charge transport material into perovskite solar cells, we demonstrate 1-cm2 cells with fill factors of >86%, and an average fill factor of 85.3%. We also report a certified steady-state efficiency of 22.6% for a 1-cm2 cell (23.33% ± 0.58% from a reverse current-voltage scan).

Non-Periodic Epsilon-Near-Zero Metamaterials at Visible Wavelengths for Efficient Non-Resonant Optical Sensing.

Epsilon-near-zero (ENZ) materials offer unique properties for applications including optical clocking, nonlinear optics, and telecommunication. To date, the fabrication of ENZ materials at visible wavelengths relies mostly on the use of periodic structures, providing some manufacturing and material challenges. Here, we present the engineering of nonperiodic sodium tungsten bronzes (NaxWO3) metamaterials featuring ENZ properties in the visible spectrum. We showcase their use as efficient optical sensors, demonstrating a nonresonant sensing mechanism based on refractive index matching. Our optimized ENZ metamaterials display an unconventional blue-shift of the transmittance maximum to increasing refractive index of the surrounding environment, achieving sensitivity as high as 150 nm/RIU. Our theoretical and experimental investigations provide first insights on this sensing mechanism, establishing guidelines for the future engineering and implementation of efficient ENZ sensors. The unique optoelectronic properties demonstrated by this class of tunable NaxWO3 materials bear potential for various applications ranging from light-harvesting to optical photodetectors.

The neural mechanisms of audiotactile binding depend on asynchrony.

Asynchrony is a critical cue informing the brain whether sensory signals are caused by a common source and should be integrated or segregated. This psychophysics-electroencephalography (EEG) study investigated the influence of asynchrony on how the brain binds audiotactile (AT) signals to enable faster responses in a redundant target paradigm. Human participants actively responded (psychophysics) or passively attended (EEG) to noise bursts, "taps-to-the-face" and their AT combinations at seven AT asynchronies: 0, ±20, ±70 and ±500 ms. Behaviourally, observers were faster at detecting AT than unisensory stimuli within a temporal integration window: the redundant target effect was maximal for synchronous stimuli and declined within a ≤70 ms AT asynchrony. EEG revealed a cascade of AT interactions that relied on different neural mechanisms depending on AT asynchrony. At small (≤20 ms) asynchronies, AT interactions arose for evoked response potentials (ERPs) at 110 ms and ~400 ms post-stimulus. Selectively at ±70 ms asynchronies, AT interactions were observed for the P200 ERP, theta-band inter-trial coherence (ITC) and power at ~200 ms post-stimulus. In conclusion, AT binding was mediated by distinct neural mechanisms depending on the asynchrony of the AT signals. Early AT interactions in ERPs and theta-band ITC and power were critical for the behavioural response facilitation within a ≤±70 ms temporal integration window.

In Situ Formation of Mixed-Dimensional Surface Passivation Layers in Perovskite Solar Cells with Dual-Isomer Alkylammonium Cations.

Dimensional engineering of perovskite solar cells has attracted significant research attention recently because of the potential to improve both device performance and stability. Here, a novel 2D passivation scheme for 3D perovskite solar cells is demonstrated using a mixed cation composition of 2D perovskite based on two different isomers of butylammonium iodide. The dual-cation 2D perovskite outperforms its single cation 2D counterparts in surface passivation quality, resulting in devices with an impressive open-circuit voltage of 1.21 V for a perovskite composition with an optical bandgap of ≈1.6 eV, and a champion efficiency of 23.27%. Using a combination of surface elemental analysis and valence electron spectra decomposition, it is shown that an in situ interaction between the 2D perovskite precursor and the 3D active layer results in surface intermixing of 3D and 2D perovskite phases, providing an effective combination of defect passivation and enhanced charge transfer, despite the semi-insulating nature of the 2D perovskite phase. The demonstration of the synergistic interaction of multiple organic spacer cations in a 2D passivation layer offers new opportunities for further enhancement of device performance with mixed dimensional perovskite solar cells.

Feature issue introduction: halide perovskites for optoelectronics.

This joint Optics Express and Optical Materials Express feature issue presents a collection of nine papers on the topic of halide perovskites for optoelectronics. Perovskite materials have attracted significant attention over the past four years, initially for their outstanding performance in thin film solar cells, but more recently for applications in light-emitting devices (LEDs and lasers), photodetectors and nonlinear optics. At the same time, there is still much more to learn about the fundamental properties of these materials, and how these depend on composition, processing, and exposure to the environment. This feature issue provides a snapshot of some of the latest research in this rapidly-evolving multidisciplinary field.

Hysteresis phenomena in perovskite solar cells: the many and varied effects of ionic accumulation.

The issue of hysteresis in perovskite solar cells has now been convincingly linked to the presence of mobile ions within the perovskite layer. Here we test the limits of the ionic theory by attempting to account for a number of exotic characterization results using a detailed numerical device model that incorporates ionic charge accumulation at the perovskite interfaces. Our experimental observations include a temporary enhancement in open-circuit voltage following prolonged periods of negative bias, dramatically S-shaped current-voltage sweeps, decreased current extraction following positive biasing or "inverted hysteresis", and non-monotonic transient behaviours in the dark and the light. Each one of these phenomena can be reproduced and ultimately explained by our models, providing further evidence for the ionic theory of hysteresis as well as valuable physical insight into the factors that coincide to bring these phenomena about. In particular we find that both interfacial recombination and carrier injection from the selective contacts are heavily affected by ionic accumulation, and are essential to explaining the non-monotonic voltage transients and S-shaped J-V curves. Inverted hysteresis is attributed to the occurrence of "positive" ionic accumulation, which may also be responsible for enhancing the stabilized open-circuit voltage in some perovskite cells.

Altered thalamocortical and intra-thalamic functional connectivity during light sleep compared with wake.

The transition from wakefulness into sleep is accompanied by modified activity in the brain's thalamocortical network. Sleep-related decreases in thalamocortical functional connectivity (FC) have previously been reported, but the extent to which these changes differ between thalamocortical pathways, and patterns of intra-thalamic FC during sleep remain untested. To non-invasively investigate thalamocortical and intra-thalamic FC as a function of sleep stage we recorded simultaneous EEG-fMRI data in 13 healthy participants during their descent into light sleep. Visual scoring of EEG data permitted sleep staging. We derived a functional thalamic parcellation during wakefulness by computing seed-based FC, measured between thalamic voxels and a set of pre-defined cortical regions. Sleep differentially affected FC between these distinct thalamic subdivisions and their associated cortical projections, with significant increases in FC during sleep restricted to sensorimotor connections. In contrast, intra-thalamic FC, both within and between functional thalamic subdivisions, showed significant increases with advancement into sleep. This work demonstrates the complexity and state-specific nature of functional thalamic relationships--both with the cortex and internally--over the sleep/wake cycle, and further highlights the importance of a thalamocortical focus in the study of sleep mechanisms.

Flame-made ultra-porous TiO2 layers for perovskite solar cells.

We report methyl ammonium lead iodide (MAPbI3) solar cells with an ultra-porous TiO2 electron transport layer fabricated using sequential flame aerosol and atomic layer depositions of porous and compact TiO2 layers. Flame aerosol pyrolysis allows rapid deposition of nanostructured and ultra-porous TiO2 layers that could be easily scaled-up for high-throughput low-cost industrial solar cell production. An efficiency of 13.7% was achieved with a flame-made nanostructured and ultra-porous TiO2 electrode that was coated with a compact 2 nm TiO2 layer. This demonstrates that MAPbI3 solar cells with a flame-made porous TiO2 layer can have a comparable efficiency to that of the control MAPbI3 solar cell with the well-established spin-coated porous TiO2 layer. The combination of flame aerosol and atomic layer deposition provides precise control of the TiO2 porosity. Notably, the porosity of the as-deposited flame-made TiO2 layers was 97% which was then fine-tuned down to 87%, 56% and 35% by varying the thickness of the subsequent compact TiO2 coating step. The effects of the decrease in porosity on the device performance are discussed. It is also shown that MAPbI3 easily infiltrates into the flame-made porous TiO2 nanostructure thanks to their high porosity and large pore size.

Photoluminescence study of time- and spatial-dependent light induced trap de-activation in CH3NH3PbI3 perovskite films.

Organometal halide perovskite-based solar cells have rapidly achieved high efficiency in recent years. However, many fundamental recombination mechanisms underlying the excellent performance are still not well understood. Here we apply confocal photoluminescence microscopy to investigate the time and spatial characteristics of light-induced trap de-activation in CH3NH3PbI3 perovskite films. Trap de-activation is characterized by a dramatic increase in PL emission during continuous laser illumination accompanied by a lateral expansion of the PL enhancement far beyond the laser spot. These observations are attributed to an oxygen-assisted trap de-activation process associated with carrier diffusion. To model this effect, we add a trap de-activation term to the standard semiconductor carrier recombination and diffusion models. With this approach we are able to reproduce the observed temporal and spatial dependence of laser induced PL enhancement using realistic physical parameters. Furthermore, we experimentally investigate the role of trap diffusion in this process, and demonstrate that the trap de-activation is not permanent, with the traps appearing again once the illumination is turned off. This study provides new insights into recombination and trap dynamics in perovskite films that could offer a better understanding of perovskite solar cell performance.

Feature issue introduction: Light, Energy and the Environment, 2014.

This feature issue highlights contributions from authors who presented their research at the OSA Light, Energy and the Environment Congress, held in Canberra, Australia from 2-5 December, 2014.

Light trapping efficiency comparison of Si solar cell textures using spectral photoluminescence.

The band-to-band absorption enhancement due to various types of light trapping structures is studied experimentally with photoluminescence (PL) on monocrystalline silicon wafers. Four basic light trapping structures are examined: reactive ion etched texture (RIE), metal-assisted etched texture (MET), random pyramid texture (RAN) and plasmonic Ag nanoparticles with a diffusive reflector (Ag/DR). We also compare two novel combined structures of front side RIE/rear side RAN and front side RIE/rear side Ag/DR. The use of photoluminescence allows us to measure the absorption due to band-to-band transitions only, and excludes parasitic absorption from free carriers and other sources. The measured absorptance spectra are used to calculate the maximum generation current for each structure, and the light trapping efficiency is compared to a recently-proposed figure of merit. The results show that by combining RIE with RAN and Ag/DR, we can fabricate two structures with excellent light trapping efficiencies of 55% and 52% respectively, which is well above previously reported values for similar wafer thicknesses. A comparison of the measured band-band absorption and the EQE of back-contact silicon solar cells demonstrates that PL extracted absorption provides a very good indication of long wavelength performance for high efficiency silicon solar cells.

Room temperature GaAsSb single nanowire infrared photodetectors.

Antimonide-based ternary III-V nanowires (NWs) allow for a tunable bandgap over a wide range, which is highly interesting for optoelectronics applications, and in particular for infrared photodetection. Here we demonstrate room temperature operation of GaAs0.56Sb0.44 NW infrared photodetectors grown by metal organic vapor phase epitaxy. These GaAs0.56Sb0.44 NWs have uniform axial composition and show p-type conductivity with a peak field-effect mobility of ∼12 cm(2) V(-1) s(-1)). Under light illumination, single GaAs0.56Sb0.44 NW photodetectors exhibited typical photoconductor behavior with an increased photocurrent observed with the increase of temperature owing to thermal activation of carrier trap states. A broadband infrared photoresponse with a long wavelength cutoff at ∼1.66 µm was obtained at room temperature. At a low operating bias voltage of 0.15 V a responsivity of 2.37 (1.44) A/W with corresponding detectivity of 1.08 × 10(9) (6.55 × 10(8)) cm√Hz/W were achieved at the wavelength of 1.3 (1.55) µm, indicating that ternary GaAs0.56Sb0.44 NWs are promising photodetector candidates for small footprint integrated optical telecommunication systems.

Pyramidal surface textures for light trapping and antireflection in perovskite-on-silicon tandem solar cells.

Perovskite-on-silicon tandem solar cells show potential to reach > 30% conversion efficiency, but require careful optical control. We introduce here an effective light-management scheme based on the established pyramidal texturing of crystalline silicon cells. Calculations show that conformal deposition of a thin film perovskite solar cell directly onto the textured front surface of a high efficiency silicon cell can yield front surface reflection losses as low as 0.52mA/cm(2). Combining this with a wavelength-selective intermediate reflector between the cells additionally provides effective light-trapping in the high-bandgap top cell, resulting in calculated absolute efficiency gains of 2 - 4%. This approach provides a practical and effective method to adapt existing high efficiency silicon cell designs for use in tandem cells, with conversion efficiencies approaching 35%.

Uncertainty and confidence from the triple-network perspective: voxel-based meta-analyses.

Our subjective confidence about particular events is related to but independent from the objective certainty of the stimuli we encounter. Surprisingly, previous investigations of the neurophysiological correlates of confidence and uncertainty have largely been carried out separately. After systematically reviewing the blood oxygenation-level dependent functional magnetic resonance imaging (BOLD fMRI) literature, and splitting studies on the basis of their task requirements, a voxel-based meta-analysis was performed to identify: (i) those regions which are replicably modulated by the uncertainty of environmental conditions; (ii) those regions whose activity is robustly affected by our subjective confidence; and (iii) those regions differentially activated at these contrasting times. In further meta-analyses the consistency of activation between these judgement types was assessed. Increased activation was consistently observed in the salience (anterior cingulate cortex and insula) and central executive network (dorsolateral prefrontal and posterior parietal cortices) in conditions of increased uncertainty; by contrast, default mode network (midline cortical and medial temporal lobe) regions robustly exhibited a positive relationship with subjective confidence. Regions including right parahippocampal gyrus were positively modulated by magnitude across both certainty and confidence judgements. This region was also shown to be more significantly modulated by confidence magnitude as compared with degree of environmental certainty. The functional and methodological implications of these findings are discussed with a view to improving future investigation of the neural basis of metacognitive judgement.

Modulation of somatosensory processing by action.

Psychophysical evidence suggests that sensations arising from our own movements are diminished when predicted by motor forward models and that these models may also encode the timing and intensity of movement. Here we report a functional magnetic resonance imaging study in which the effects on sensation of varying the occurrence, timing and force of movements were measured. We observed that tactile-related activity in a region of secondary somatosensory cortex is reduced when sensation is associated with movement and further that this reduction is maximal when movement and sensation occur synchronously. Motor force is not represented in the degree of attenuation but rather in the magnitude of this region's response. These findings provide neurophysiological correlates of previously-observed behavioural forward-model phenomena, and advocate the adopted approach for the study of clinical conditions in which forward-model deficits have been posited to play a crucial role.

Theta power during encoding predicts subsequent-memory performance and default mode network deactivation.

The subsequent memory paradigm, according to which cerebral activity for later remembered (LR) and later forgotten (LF) items is contrasted, can be used to characterize the processes necessary for successful memory encoding. Previous simultaneous electroencephalography/functional magnetic resonance imaging (EEG/fMRI) memory studies suggest an inverse relationship between frontal theta band power and the blood oxygenation level dependent (BOLD) signal in the default mode network (DMN). The principal aim of this EEG/fMRI study was to test the hypothesis that this putative theta-DMN relationship is less evident in LF compared with LR trials. Fourteen healthy participants performed an episodic memory task in which pictorial stimuli were presented during encoding, and categorized (as LR or LF) by subsequent memory performance. For each encoding trial, the mean of the Hilbert envelope of the theta signal from 400 to 800 ms after stimulus presentation was calculated. To integrate the EEG and fMRI data, general linear models (GLMs) were used to assess the extent to which these single-trial theta values (as modulators of the main effect of stimulus) predicted DMN BOLD signal change, using: (i) whole-head univariate GLMs and (ii) GLMs in which the outcome variable was the time-course of a DMN component derived from spatial independent component analysis of the fMRI data. Theta was significantly greater for LR than LF stimuli. Furthermore, the inverse relationship between theta and BOLD in the DMN was consistently stronger for LR than LF pictures. These findings imply that theta oscillations are key to attenuating processes which may otherwise impair memory encoding.

Motion-related artefacts in EEG predict neuronally plausible patterns of activation in fMRI data.

The simultaneous acquisition and subsequent analysis of EEG and fMRI data is challenging owing to increased noise levels in the EEG data. A common method to integrate data from these two modalities is to use aspects of the EEG data, such as the amplitudes of event-related potentials (ERP) or oscillatory EEG activity, to predict fluctuations in the fMRI data. However, this relies on the acquisition of high quality datasets to ensure that only the correlates of neuronal activity are being studied. In this study, we investigate the effects of head-motion-related artefacts in the EEG signal on the predicted T2*-weighted signal variation. We apply our analyses to two independent datasets: 1) four participants were asked to move their feet in the scanner to generate small head movements, and 2) four participants performed an episodic memory task. We created T2*-weighted signal predictors from indicators of abrupt head motion using derivatives of the realignment parameters, from visually detected artefacts in the EEG as well as from three EEG frequency bands (theta, alpha and beta). In both datasets, we found little correlation between the T2*-weighted signal and EEG predictors that were not convolved with the canonical haemodynamic response function (cHRF). However, all convolved EEG predictors strongly correlated with the T2*-weighted signal variation in various regions including the bilateral superior temporal cortex, supplementary motor area, medial parietal cortex and cerebellum. The finding that movement onset spikes in the EEG predict T2*-weighted signal intensity only when the time course of movements is convolved with the cHRF, suggests that the correlated signal might reflect a BOLD response to neural activity associated with head movement. Furthermore, the observation that broad-spectral EEG spikes tend to occur at the same time as abrupt head movements, together with the finding that abrupt movements and EEG spikes show similar correlations with the T2*-weighted signal, indicates that the EEG spikes are produced by abrupt movement and that continuous regressors of EEG oscillations contain motion-related noise even after stringent correction of the EEG data. If not properly removed, these artefacts complicate the use of EEG data as a predictor of T2*-weighted signal variation.

Photonic crystal nanocavities fabricated from chalcogenide glass fully embedded in an index-matched cladding with a high Q-factor (>750,000).

We have designed and fabricated a 2-D photonic crystal hetero-structure cavity in the chalcogenide glass Ge(11.5)As(24)Se(64.5) that is fully embedded in a cladding with refractive index of 1.44. The low index contrast of this structure (≈1.21) means that high-Q resonances cannot be obtained using standard hetero-structure cavity designs based on W1 waveguides. We show that reducing the waveguide width can substantially improve light confinement, leading to high-Q resonances in a hetero-structure cavity. Numerical simulations indicate intrinsic Q(v) > 10(7) are possible with this approach. Experimentally, an optical cavity with a high intrinsic Q(v)>7.6 x 10(5) was achieved in a structure with a theoretical Q(v) = 1.7 x 10(6).

Slow-light enhanced optical forces between longitudinally shifted photonic-crystal nanowire waveguides.

We reveal that slow-light enhanced optical forces between side-coupled photonic-crystal nanowire waveguides can be flexibly controlled by introducing a relative longitudinal shift. We predict that close to the photonic band edge, where the group velocity is reduced, the transverse force can be tuned from repulsive to attractive, and the force is suppressed for a particular shift value. Additionally the shift leads to symmetry breaking that can facilitate longitudinal forces acting on the waveguides, in contrast to unshifted structures where such forces vanish.