RESUMO
In older men, higher high-sensitivity C-reactive protein (hsCRP) concentrations were associated with faster prospectively assessed endocortical expansion (distal radius, distal tibia) and slightly higher cortical bone loss at distal tibia, but not with the fracture risk. High hsCRP level has a limited impact on bone decline in older men. PURPOSE: Data on the link of the high-sensitivity C-reactive protein (hsCRP) with bone loss and fracture risk are discordant. We studied the association of the hsCRP with the prospectively assessed decrease in areal bone mineral density (aBMD), bone microarchitecture decline, and fracture risk in older men. METHODS: At baseline, hsCRP was measured in 823 men aged 60-88. Areal BMD and bone microarchitecture (distal radius, distal tibia) were assessed by dual-energy X-ray absorptiometry and high-resolution peripheral QCT, respectively, at baseline and after 4 and 8 years. Data on incident fractures were collected for 8 years. RESULTS: Higher hsCRP concentration was associated with faster increase in aBMD at the whole body and lumbar spine, but not other sites. Higher hsCRP levels were associated with faster decrease in cortical area and more rapid increase in trabecular area at the distal radius (0.048 mm2/year/SD, p < 0.05) and distal tibia (0.123 mm2/year/SD, p < 0.001). At the distal tibia, high hsCRP level was associated with greater decrease in total and cortical volumetric BMD (vBMD) and in failure load. The hsCRP levels were not associated with the fracture risk, even after accounting for competing risk of death. CONCLUSION: Higher hsCRP levels were associated with greater endocortical expansion at the distal radius and tibia. Higher hsCRP was associated with slightly faster decrease in total and cortical vBMD and failure load at distal tibia, but not with the fracture risk. Thus, high hsCRP levels are associated with faster cortical bone loss, but not with fracture risk in older men.
Assuntos
Doenças Ósseas Metabólicas , Fraturas Ósseas , Masculino , Humanos , Idoso , Proteína C-Reativa , Estudos Prospectivos , Densidade Óssea , Absorciometria de Fóton , Tíbia , Rádio (Anatomia) , Vértebras LombaresRESUMO
PURPOSE OF REVIEW: Summarize the recent literature that investigates how advanced medical imaging has contributed to our understanding of skeletal phenotypes and fracture risk across the lifespan. RECENT FINDINGS: Characterization of bone phenotypes on the macro-scale using advanced imaging has shown that while wide bones are generally stronger than narrow bones, they may be more susceptible to age-related declines in bone strength. On the micro-scale, HR-pQCT has been used to identify bone microarchitecture phenotypes that improve stratification of fracture risk based on phenotype-specific risk factors. Adolescence is a key phase for bone development, with distinct sex-specific growth patterns and significant within-sex bone property variability. However, longitudinal studies are needed to evaluate how early skeletal growth impacts adult bone phenotypes and fracture risk. Metabolic and rare bone diseases amplify fracture risk, but the interplay between bone phenotypes and disease remains unclear. Although bone phenotyping is a promising approach to improve fracture risk assessment, the clinical availability of advanced imaging is still limited. Consequently, alternative strategies for assessing and managing fracture risk include vertebral fracture assessment from clinically available medical imaging modalities/techniques or from fracture risk assessment tools based on clinical risk factors. Bone fragility is not solely determined by its density but by a combination of bone geometry, distribution of bone mass, microarchitecture, and the intrinsic material properties of bone tissue. As such, different individuals can exhibit distinct bone phenotypes, which may predispose them to be more vulnerable or resilient to certain perturbations that influence bone strength.
Assuntos
Fraturas Ósseas , Osteoporose , Masculino , Adulto , Feminino , Humanos , Osso e Ossos/diagnóstico por imagem , Densidade Óssea , Osteoporose/diagnóstico por imagem , Fraturas Ósseas/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
PURPOSE OF REVIEW: Diabetes mellitus is defined by elevated blood glucose levels caused by changes in glucose metabolism and, according to its pathogenesis, is classified into type 1 (T1DM) and type 2 (T2DM) diabetes mellitus. Diabetes mellitus is associated with multiple degenerative processes, including structural alterations of the bone and increased fracture risk. High-resolution peripheral computed tomography (HR-pQCT) is a clinically applicable, volumetric imaging technique that unveils bone microarchitecture in vivo. Numerous studies have used HR-pQCT to assess volumetric bone mineral density and microarchitecture in patients with diabetes, including characteristics of trabecular (e.g. number, thickness and separation) and cortical bone (e.g. thickness and porosity). However, study results are heterogeneous given different imaging regions and diverse patient cohorts. RECENT FINDINGS: This meta-analysis assessed T1DM- and T2DM-associated characteristics of bone microarchitecture measured in human populations in vivo reported in PubMed- and Embase-listed publications from inception (2005) to November 2021. The final dataset contained twelve studies with 516 participants with T2DM and 3067 controls and four studies with 227 participants with T1DM and 405 controls. While T1DM was associated with adverse trabecular characteristics, T2DM was primarily associated with adverse cortical characteristics. These adverse effects were more severe at the radius than the load-bearing tibia, indicating increased mechanical loading may compensate for deleterious bone microarchitecture changes and supporting mechanoregulation of bone fragility in diabetes mellitus. Our meta-analysis revealed distinct predilection sites of bone structure aberrations in T1DM and T2DM, which provide a foundation for the development of animal models of skeletal fragility in diabetes and may explain the uncertainty of predicting bone fragility in diabetic patients using current clinical algorithms.
Assuntos
Diabetes Mellitus Tipo 1 , Diabetes Mellitus Tipo 2 , Humanos , Diabetes Mellitus Tipo 1/complicações , Diabetes Mellitus Tipo 1/metabolismo , Estudos Transversais , Rádio (Anatomia) , Densidade Óssea/fisiologia , Tomografia Computadorizada por Raios X , Absorciometria de FótonRESUMO
Finite element analysis (FE) coupled with high-resolution peripheral quantitative computed tomography (HR-pQCT) allows for noninvasive in vivo assessment of fracture stiffness at peripheral locations including the distal radius. Previous studies have reported the ability of FE analysis to capture significant longitudinal changes in fracture stiffness. We hypothesized that continuum-based FE methods are necessary to capture significant changes in FE-estimated stiffness in men and women, with closed reductions and casting, over the course of their fracture healing process. The primary aim of the study was to evaluate the performance of 3 micro-FE (µFE) methods, 2 density-based (continuum) methods, and a homogeneous method. A total of 30 participants with stable distal radius fractures completed follow-ups at 2, 4, 6, 8, 12, and 26 weeks postfracture. Participants had their fractured wrist scanned using HR-pQCT at each follow-up; the contralateral wrist was also scanned at the initial assessment to represent baseline conditions. Images were used to generate continuum and homogeneous µFE models. Uniaxial compression and torsional tests were completed, with apparent stiffness determined as the primary outcome measure. Stiffness of the fractured wrist was compared to stiffness of the uninjured contralateral wrist to quantify the change in stiffness. Days since fracture significantly predicted change in stiffness for continuum and homogeneous µFE methods (p < 0.05). Continuum µFE methods appeared to account for partially mineralized tissues, resulting in a graduated recovery of stiffness (1% per week). Homogeneous µFE methods were more sensitive to stages of healing progression, resulting in a faster recovery of stiffness (3% per week). Our findings demonstrate the capability of µFE to capture the restoration of stiffness at the fractured side to prefracture stiffness in men and women, up to 6 months postfracture.
Assuntos
Fraturas do Rádio , Rádio (Anatomia) , Densidade Óssea , Feminino , Análise de Elementos Finitos , Consolidação da Fratura , Humanos , Masculino , Fraturas do Rádio/diagnóstico por imagem , Fraturas do Rádio/terapia , Tomografia Computadorizada por Raios XRESUMO
High resolution peripheral quantitative computed tomography (HR-pQCT) was designed to study bone mineral density (BMD) and microarchitecture in peripheral sites at the distal radius and tibia. With the introduction of the second generation HR-pQCT scanner (XtremeCT II, Scanco Medical) that has a larger, longer gantry it is now possible to study the human knee in vivo using HR-pQCT. Previous validation of HR-pQCT measurements at the distal radius and tibia against micro-CT is not representative of the knee because the increased cross-sectional area, greater amount of soft tissue surrounding the scan region, and different imaging protocol result in potentially increased beam hardening effects and photon scatter and different signal-to-noise ratio. The objective of this study is to determine the accuracy of density and microarchitecture measurements in the human knee measured by HR-pQCT using an in vivo protocol. Twelve fresh-frozen cadaver knees were imaged using in vivo HR-pQCT (60.7 µm) protocol. Subsequentially, distal femurs were extracted and imaged using a higher resolution (30.3 µm) ex vivo protocol, replicating micro-CT imaging. Scans were registered so that agreement of density and bone microarchitecture measurements could be determined using linear regression and Bland-Altman plots. All density and microarchitecture outcomes were highly correlated between the 2 protocols (R2 > 0.89) albeit with statistically significant differences between absolute measures based on paired t tests. All parameters showed accuracy between 4.5% and 8.7%, and errors were highly systematic, particularly for trabecular BMD and trabecular thickness (R2 > 0.93). We found that BMD and microarchitecture measurements in the distal femur obtained using an in vivo HR-pQCT knee protocol contained systematic errors, and accurately represented measurements obtained using a micro-CT equivalent imaging protocol. This work establishes the validity and limitations of using HR-pQCT to study the BMD and microarchitecture of human knees in future clinical studies.
Assuntos
Densidade Óssea , Fêmur , Fêmur/diagnóstico por imagem , Humanos , Rádio (Anatomia)/diagnóstico por imagem , Tíbia/diagnóstico por imagem , Suporte de CargaRESUMO
Due to difficulty assessing healing of distal radius fractures using conventional radiography, there is interest in using high resolution peripheral quantitative computed tomography (HR-pQCT) to track healing at the microarchitectural level. Unfortunately, the plaster-of-Paris and fiberglass casts used to immobilize fractures affect HR-pQCT measurements due to beam hardening, and increased noise. The challenge is compounded because casts have variable thickness, and an individual patient will often have their cast changed 2-3 times during the course of treatment. This study quantifies the effect of casts within a clinically relevant range of thicknesses on measured bone parameters at the distal radius, and establishes conversion equations to correct for systematic error in due to cast presence. Eighteen nonfractured participants were scanned by HR-pQCT in three conditions: no cast, plaster-of-Paris cast, and fiberglass cast. Measured parameters were compared between the baseline scan (no cast) and each cast scan to evaluate if systematic error exists due to cast presence. A linear regression model was used to determine an appropriate conversion for parameters that were found to have systematic error. Plaster-of-Paris casts had a greater range of thicknesses (3.2-9.5 mm) than the fiberglass casts (3.0-5.4 mm), and induced a greater magnitude of systematic error overall. Key parameters of interest were bone mineral density (total, cortical, and trabecular) and trabecular bone volume fraction, all of which were found to have systematic error due to presence of either cast type. Linear correlations between baseline and cast scans for these parameters were excellent (R2 > 0.98), and appropriate conversions could be determined within a margin of error less than a ±6% for the plaster-of-Paris cast, and ±4% for the fiberglass cast. We have demonstrated the effects of cast presence on bone microarchitecture measurements, and presented a method to correct for systematic error, in support of future use of HR-pQCT to study fracture healing.
Assuntos
Moldes Cirúrgicos , Consolidação da Fratura , Fraturas do Rádio/diagnóstico por imagem , Rádio (Anatomia)/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Adolescente , Adulto , Artefatos , Densidade Óssea , Sulfato de Cálcio , Osso Esponjoso/diagnóstico por imagem , Osso Cortical/diagnóstico por imagem , Feminino , Análise de Elementos Finitos , Vidro , Voluntários Saudáveis , Humanos , Modelos Lineares , Masculino , Pessoa de Meia-Idade , Fraturas do Rádio/terapia , Adulto JovemRESUMO
INTRODUCTION: The continued development of high-resolution peripheral quantitative computed tomography (HR-pQCT) has led to a second-generation scanner with higher resolution and longer scan region. However, large multicenter prospective cohorts were collected with first-generation HR-pQCT and have been used to develop bone phenotyping and fracture risk prediction (µFRAC) models. This study establishes whether there is sufficient universality of these first-generation trained models for use with second-generation scan data. METHODS: HR-pQCT data were collected for a cohort of 60 individuals, who had been scanned on both first- and second-generation scanners on the same day to establish the universality of the HR-pQCT models. These data were each used as input to first-generation trained bone microarchitecture models for bone phenotyping and fracture risk prediction, and their outputs were compared for each study participant. Reproducibility of the models were assessed using same-day repeat scans obtained from first-generation (n = 37) and second-generation (n = 74) scanners. RESULTS: Across scanner generations, the bone phenotyping model performed with an accuracy of 93.1%. Similarly, the 5-year fracture risk assessment by µFRAC was well correlated with a Pearson's (r) correlation coefficient of r > 0.83 for the three variations of µFRAC (varying inclusion of clinical risk factors, finite element analysis, and dual X-ray absorptiometry). The first-generation reproducibility cohort performed with an accuracy for categorical assignment of 100% (bone phenotyping) and a correlation coefficient of 0.99 (µFRAC), whereas the second-generation reproducibility cohort performed with an accuracy of 96.4% (bone phenotyping) and a correlation coefficient of 0.99 (µFRAC). CONCLUSION: We demonstrated that bone microarchitecture models trained using first-generation scan data generalize well to second-generation scans, performing with a high level of accuracy and reproducibility. Less than 4% of individuals' estimated fracture risk led to a change in treatment threshold, and in general, these dissimilar outcomes using second-generation data tended to be more conservative.
Establishing the universality of first-generation-trained HR-pQCT prediction models on second-generation scan data is important to move the bone microarchitecture field forward. We found that despite the difference in resolutions between the two HR-pQCT generations, models developed with first-generation data generalized well to second-generation systems. This avoids unnecessarily repeating complex studies.
Assuntos
Fraturas Ósseas , Fenótipo , Tomografia Computadorizada por Raios X , Humanos , Feminino , Masculino , Medição de Risco , Fraturas Ósseas/diagnóstico por imagem , Idoso , Pessoa de Meia-Idade , Osso e Ossos/diagnóstico por imagem , Adulto , Densidade ÓsseaRESUMO
Older men with high bone turnover have faster bone loss. We assessed the link between the baseline levels of bone turnover markers (BTMs) and the prospectively assessed bone microarchitecture decline in men. In 825 men aged 60-87 yr, we measured the serum osteocalcin (OC), bone alkaline phosphatase (BAP), N-terminal propeptide of type I procollagen (PINP), and C-terminal telopeptide of type I collagen (CTX-I), and urinary total deoxypyridinoline (tDPD). Bone microarchitecture and strength (distal radius and distal tibia) were estimated by high-resolution pQCT (XtremeCT, Scanco Medical) at baseline and then after 4 and 8 yr. Thirty-seven men took medications affecting bone metabolism. Statistical models were adjusted for age and BMI. At the distal radius, the decrease in the total bone mineral density (Tt.BMD), cortical BMD (Ct.BMD), cortical thickness (Ct.Thd), and cortical area (Ct.Ar) and failure load was faster in the highest vs the lowest CTX-I quartile (failure load: -0.94 vs -0.31% yr-1, P < .001). Patterns were similar for distal tibia. At the distal tibia, bone decline (Tt.BMD, Ct.Thd, Ct.Ar, Ct.BMD, and failure load) was faster in the highest vs the lowest tDPD quartile. At each skeletal site, the rate of decrease in Tb.BMD differed between the extreme OC quartiles (P < .001). Men in the highest BAP quartile had a faster loss of Tt.BMD, Tb.BMD, reaction force, and failure load vs the lowest quartile. The link between PINP and bone decline was poor. The BTM score is the sum of the nos. of the quartiles for each BTM. Men in the highest quartile of the score had a faster loss of cortical bone and bone strength vs the lowest quartile. Thus, in the older men followed prospectively for 8 yr, the rate of decline in bone microarchitecture and estimated bone strength was 50%-215% greater in men with high bone turnover (highest quartile, CTX-I above the median) compared to the men with low bone turnover (lowest quartile, CTX-I below the median).
Assuntos
Densidade Óssea , Osso e Ossos , Masculino , Humanos , Idoso , Feminino , Estudos Prospectivos , Remodelação Óssea , Rádio (Anatomia)RESUMO
Osteoporotic fractures are a major health challenge in older adults. Despite the availability of safe and effective therapies for osteoporosis, these therapies are underused in individuals at high risk for fracture, calling for better case-finding and fracture risk assessment strategies. Artificial intelligence (AI) and machine learning (ML) hold promise for enhancing identification of individuals at high risk for fracture by distilling useful features from high-dimensional data derived from medical records, imaging, and wearable devices. AI-ML could enable automated opportunistic screening for vertebral fractures and osteoporosis, home-based monitoring and intervention targeting lifestyle factors, and integration of multimodal features to leverage fracture prediction, ultimately aiding improved fracture risk assessment and individualised treatment. Optimism must be balanced with consideration for the explainability of AI-ML models, biases (including information inequity in numerically under-represented populations), model limitations, and net clinical benefit and workload impact. Clinical integration of AI-ML algorithms has the potential to transform osteoporosis management, offering a more personalised approach to reduce the burden of osteoporotic fractures.
Assuntos
Inteligência Artificial , Fraturas por Osteoporose , Humanos , Fraturas por Osteoporose/prevenção & controle , Fraturas por Osteoporose/epidemiologia , Medição de Risco/métodos , Osteoporose/terapia , Aprendizado de Máquina , Fatores de RiscoRESUMO
Type 1 diabetes mellitus (T1DM) has been linked to increased osteocyte apoptosis, local accumulation of mineralized lacunar spaces, and microdamage suggesting an impairment of the mechanoregulation network in affected individuals. Diabetic neuropathy might exacerbate this dysfunction through direct effects on bone turnover, and indirect effects on balance, muscle strength, and gait. However, the in vivo effects of impaired bone mechanoregulation on bone remodeling in humans remain underexplored. This longitudinal cohort study assessed consenting participants with T1DM and varying degree of distal symmetric sensorimotor polyneuropathy (T1DM, n = 20, median age 46.5 yr, eight female) and controls (CTRL; n = 9, median age 59.0 yr, four female) at baseline and 4-yr follow-up. Nerve conduction in participants with T1DM was tested using DPNCheck and bone remodeling was quantified with longitudinal high-resolution peripheral quantitative-computed tomography (HR-pQCT, 82 µm) at the standard distal sites. Local trabecular bone formation (Tb.F) and resorption (Tb.R) sites were captured by implementing 3D rigid image registration of HR-pQCT images, and the mechanical environment across the bone microarchitecture at these sites was simulated using micro-finite element analysis. We calculated odds ratios to determine the likelihood of bone formation (ORF) and resorption (ORR) with increasing/decreasing strain in percent as markers for mechanoregulation. At the distal radius, Tb.F was 47% lower and Tb.R was 59% lower in T1DM participants compared with CTRL (P < .05). Tb.F correlated positively with nerve conduction amplitude (R = 0.69, P < .05) in participants with T1DM and negatively with glycated hemoglobin (HbA1c) (R = -0.45, P < .05). Additionally, ORF was 34% lower and ORR was 18% lower in T1DM compared with CTRL (P < .05). Our findings represent in vivo evidence suggesting that bone remodeling in individuals with T1DM is in a state of low responsiveness to mechanical stimuli, resulting in impaired bone formation and resorption rates; these correlate to the degree of neuropathy and level of diabetes control.
In a healthy adult, the body's skeleton self-repairsor remodelsitself to maintain its strength. At the microscopic level, this process is orchestrated by cells, called osteocytes, which can sense and respond to local mechanical forces. Recent studies have suggested that type 1 diabetes mellitus (T1DM), a metabolic bone disease, may negatively impact this mechanically regulated process and reduce bone strength. To investigate this further, we utilized novel methods to monitor local changes in bone microstructure over time using highresolution peripheral quantitativecomputed tomography, allowing us to study the results of cellular behavior on bone remodeling in participants over time. Our study found that bone formation was 47% lower and bone resorption was 59% lower in participants with T1DM compared with controls (CTRL). Bone formation correlated positively with peripheral nerve function and negatively with glycaemic control in participants with T1DM. Furthermore, the links between mechanical forces acting on bone remodeling were 34% weaker for formation and 18% weaker for resorption compared with CTRL. Our findings show that bone remodeling in people with T1DM is in a state of low responsiveness to mechanical stimuli, resulting in impaired bone formation and resorption rates, and ultimately, impaired self-repair.
Assuntos
Remodelação Óssea , Diabetes Mellitus Tipo 1 , Humanos , Diabetes Mellitus Tipo 1/fisiopatologia , Diabetes Mellitus Tipo 1/patologia , Diabetes Mellitus Tipo 1/complicações , Feminino , Pessoa de Meia-Idade , Masculino , AdultoRESUMO
Fracture risk increases with lower areal bone mineral density (aBMD); however, aBMD-related estimate of risk may decrease with age. This may depend on technical limitations of 2-dimensional (2D) dual energy X-ray absorptiometry (DXA) which are reduced with 3D high-resolution peripheral quantitative computed tomography (HR-pQCT). Our aim was to examine whether the predictive utility of HR-pQCT measures with fracture varies with age. We analyzed associations of HR-pQCT measures at the distal radius and distal tibia with two outcomes: incident fractures and major osteoporotic fractures. We censored follow-up time at first fracture, death, last contact or 8 years after baseline. We estimated hazard ratios (HR) and 95%CI for the association between bone traits and fracture incidence across age quintiles. Among 6835 men and women (ages 40-96) with at least one valid baseline HR-pQCT scan who were followed prospectively for a median of 48.3 months, 681 sustained fractures. After adjustment for confounders, bone parameters at both the radius and tibia were associated with higher fracture risk. The estimated HRs for fracture did not vary significantly across age quintiles for any HR-pQCT parameter measured at either the radius or tibia. In this large cohort, the homogeneity of the associations between the HR-pQCT measures and fracture risk across age groups persisted for all fractures and for major osteoporotic fractures. The patterns were similar regardless of the HR-pQCT measure, the type of fracture, or the statistical models. The stability of the associations between HR-pQCT measures and fracture over a broad age range shows that bone deficits or low volumetric density remain major determinants of fracture risk regardless of age group. The lower risk for fractures across measures of aBMD in older adults in other studies may be related to factors which interfere with DXA but not with HR-pQCT measures.
Assuntos
Tomografia Computadorizada por Raios X , Humanos , Idoso , Masculino , Feminino , Estudos Prospectivos , Pessoa de Meia-Idade , Idoso de 80 Anos ou mais , Fatores de Risco , Densidade Óssea , Adulto , Fraturas Ósseas/diagnóstico por imagem , Fraturas Ósseas/epidemiologia , Envelhecimento , Rádio (Anatomia)/diagnóstico por imagem , Tíbia/diagnóstico por imagem , Tíbia/patologiaRESUMO
High-resolution peripheral quantitative computed tomography (HR-pQCT) is an emerging in vivo imaging modality for quantification of bone microarchitecture. However, extraction of quantitative microarchitectural parameters from HR-pQCT images requires an accurate segmentation of the image. The current standard protocol using semi-automated contouring for HR-pQCT image segmentation is laborious, introduces inter-operator biases into research data, and poses a barrier to streamlined clinical implementation. In this work, we propose and validate a fully automated algorithm for segmentation of HR-pQCT radius and tibia images. A multi-slice 2D U-Net produces initial segmentation predictions, which are post-processed via a sequence of traditional morphological image filters. The U-Net was trained on a large dataset containing 1822 images from 896 unique participants. Predicted segmentations were compared to reference segmentations on a disjoint dataset containing 386 images from 190 unique participants, and 156 pairs of repeated images were used to compare the precision of the novel and current protocols. The agreement of morphological parameters obtained using the predicted segmentation relative to the reference standard was excellent (R2 between 0.938 and > 0.999). Precision was significantly improved for several outputs, most notably cortical porosity. This novel and robust algorithm for automated segmentation will increase the feasibility of using HR-pQCT in research and clinical settings.
Assuntos
Osso e Ossos , Tomografia Computadorizada por Raios X , Humanos , Tomografia Computadorizada por Raios X/métodos , Tíbia/diagnóstico por imagem , Rádio (Anatomia) , Extremidade Superior , Densidade ÓsseaRESUMO
Rapid loss of areal bone mineral density (aBMD) is associated with higher fracture risk after adjustment for confounders including initial aBMD. However, the link between bone microarchitecture decline and fracture is not clear. We studied the association between bone microarchitecture deterioration assessed prospectively over 4 years and the subsequent fracture risk in older men. Bone microarchitecture at the distal radius and tibia was assessed by high-resolution peripheral QCT (HR-pQCT; XtremeCT, Scanco Medical) (baseline, 4 years) in 732 men aged 60-87 years. During the 8-year follow-up, 109 men had fragility fractures. Areal BMD was assessed by dual-energy X-ray absorptiometry. After adjustment for age, weight, prior falls and fractures, distal radius aBMD (baseline, slope), and baseline distal radius total volumetric BMD (Tt.BMD), a faster decrease in distal radius Tt.BMD was associated with higher fracture risk (hazard ratio [HR] = 1.54/SD, 95% confidence interval: 1.20-1.95, p < .005). Rapid cortical bone loss was associated with higher fracture risk (cortical thickness: HR = 1.48; 1.15-1.90, p < .01; cortical BMD: HR = 1.38; 1.11-1.72, p < .01). The rate of trabecular bone loss at the distal radius and the rate of bone microarchitecture decline at the distal tibia were not associated with fracture risk. After adjustment for aBMD and distal radius HR-pQCT measures assessed after 4 years, changes in Tt.BMD were associated with higher fracture risk (e.g., Tt.BMD: HR = 1.37; 1.11-1.69, p < .005). Compared with the reference model (age, weight, prior fractures and falls, baseline and slope of aBMD, baseline HR-pQCT value), further addition of the slope of the HR-pQCT measure did not improve the fracture prediction. Thus, rapid cortical bone loss at the distal radius is associated with higher fracture risk in the multivariable models including baseline values of the HR-pQCT measure. However, repeated HR-pQCT measurements did not improve the assessment of the fracture risk in older men (compared with the reference model defined earlier). © 2023 American Society for Bone and Mineral Research (ASBMR).
Assuntos
Doenças Ósseas Metabólicas , Fraturas Ósseas , Masculino , Humanos , Idoso , Rádio (Anatomia)/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Fraturas Ósseas/diagnóstico por imagem , Fraturas Ósseas/epidemiologia , Osso e Ossos , Densidade Óssea , Osso Cortical/diagnóstico por imagem , Absorciometria de Fóton , Tíbia/diagnóstico por imagemRESUMO
BACKGROUND: Recent applications of high-resolution peripheral quantitative computed tomography (HR-pQCT) have demonstrated that changes in local bone remodelling can be quantified in vivo using longitudinal three-dimensional image registration. However, certain emerging applications, such as fracture healing and joint analysis, require larger multi-stack scan regions that can result in stack shift image artifacts. These artifacts can be detrimental to the accurate alignment of the bone structure across multiple timepoints. The purpose of this study was to establish a multi-stack registration protocol for evaluating longitudinal HR-pQCT images and to assess the accuracy and precision error in comparison with measures obtained using previously established three-dimensional longitudinal registration. METHODS: Three same day multi-stack HR-pQCT scans of the radius (2 stacks in length) and tibia (3 stacks in length) were obtained from 39 healthy individuals who participated in a previous reproducibility study. A fully automated multi-stack registration algorithm was developed to re-align stacks within a scan by leveraging slight offsets between longitudinal scans. Stack shift severity before and after registration was quantified using a newly proposed stack-shift severity score. The false discovery rate for bone remodelling events and precision error of bone morphology and micro-finite element analysis parameters were compared between longitudinally registered scans with and without the addition of multi-stack registration. RESULTS: Most scans (82 %) improved in stack alignment or maintained the lowest stack shift severity score when multi-stack registration was implemented. The false discovery rate of bone remodelling events significantly decreased after multi-stack registration, resulting in median false detection of bone formation and resorption fractions between 3.2 to 7.5 % at the radius and 3.4 to 5.3 % at the tibia. Further, precision error was significantly reduced or remained unchanged in all standard bone morphology and micro-finite element analysis parameters, except for total and trabecular cross-sectional areas. CONCLUSION: Multi-stack registration is an effective strategy for accurately aligning multi-stack HR-pQCT scans without modification of the image acquisition protocol. The algorithm presented here is a viable approach for performing accurate morphological analysis on multi-stack HR-pQCT scans, particularly for advanced application investigating local bone remodelling in vivo.
Assuntos
Algoritmos , Artefatos , Humanos , Reprodutibilidade dos Testes , Cintilografia , Remodelação ÓsseaRESUMO
Local mechanical stimuli in the bone microenvironment are essential for the homeostasis and adaptation of the skeleton, with evidence suggesting that disruption of the mechanically-driven bone remodelling process may lead to bone loss. Longitudinal clinical studies have shown the combined use of high-resolution peripheral quantitative computed tomography (HR-pQCT) and micro-finite element analysis can be used to measure load-driven bone remodelling in vivo; however, quantitative markers of bone mechanoregulation and the precision of these analyses methods have not been validated in human subjects. Therefore, this study utilised participants from two cohorts. A same-day cohort (n = 33) was used to develop a filtering strategy to minimise false detections of bone remodelling sites caused by noise and motion artefacts present in HR-pQCT scans. A longitudinal cohort (n = 19) was used to develop bone imaging markers of trabecular bone mechanoregulation and characterise the precision for detecting longitudinal changes in subjects. Specifically, we described local load-driven formation and resorption sites independently using patient-specific odds ratios (OR) and 99 % confidence intervals. Conditional probability curves were computed to link the mechanical environment to the remodelling events detected on the bone surface. To quantify overall mechanoregulation, we calculated a correct classification rate measuring the fraction of remodelling events correctly identified by the mechanical signal. Precision was calculated as root-mean-squared averages of the coefficient of variation (RMS-SD) of repeated measurements using scan-rescan pairs at baseline combined with a one-year follow-up scan. We found no significant mean difference (p < 0.01) between scan-rescan conditional probabilities. RMS-SD was 10.5 % for resorption odds, 6.3 % for formation odds, and 1.3 % for correct classification rates. Bone was most likely to be formed in high-strain and resorbed in low-strain regions for all participants, indicating a consistent, regulated response to mechanical stimuli. For each percent increase in strain, the likelihood of bone resorption decreased by 2.0 ± 0.2 %, and the likelihood of bone formation increased by 1.9 ± 0.2 %, totalling 38.3 ± 1.1 % of strain-driven remodelling events across the entire trabecular compartment. This work provides novel robust bone mechanoregulation markers and their precision for designing future clinical studies.
Assuntos
Reabsorção Óssea , Osso e Ossos , Humanos , Osso e Ossos/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Osteogênese , Reabsorção Óssea/diagnóstico por imagem , Remodelação Óssea , Densidade Óssea/fisiologia , Rádio (Anatomia)/fisiologiaRESUMO
Most fracture risk assessment tools use clinical risk factors combined with bone mineral density (BMD) to improve assessment of osteoporosis; however, stratifying fracture risk remains challenging. This study developed a fracture risk assessment tool that uses information about volumetric bone density and three-dimensional structure, obtained using high-resolution peripheral quantitative compute tomography (HR-pQCT), to provide an alternative approach for patient-specific assessment of fracture risk. Using an international prospective cohort of older adults (n = 6802) we developed a tool to predict osteoporotic fracture risk, called µFRAC. The model was constructed using random survival forests, and input predictors included HR-pQCT parameters summarizing BMD and microarchitecture alongside clinical risk factors (sex, age, height, weight, and prior adulthood fracture) and femoral neck areal BMD (FN aBMD). The performance of µFRAC was compared to the Fracture Risk Assessment Tool (FRAX) and a reference model built using FN aBMD and clinical covariates. µFRAC was predictive of osteoporotic fracture (c-index = 0.673, p < 0.001), modestly outperforming FRAX and FN aBMD models (c-index = 0.617 and 0.636, respectively). Removal of FN aBMD and all clinical risk factors, except age, from µFRAC did not significantly impact its performance when estimating 5-year and 10-year fracture risk. The performance of µFRAC improved when only major osteoporotic fractures were considered (c-index = 0.733, p < 0.001). We developed a personalized fracture risk assessment tool based on HR-pQCT that may provide an alternative approach to current clinical methods by leveraging direct measures of bone density and structure. © 2023 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).
Assuntos
Fraturas por Osteoporose , Humanos , Idoso , Adulto , Fraturas por Osteoporose/diagnóstico por imagem , Estudos Prospectivos , Tomografia Computadorizada por Raios X , Densidade Óssea , Medição de RiscoRESUMO
Poor vitamin D status and high parathyroid hormone (PTH) level are associated with impaired bone microarchitecture, but these data are mainly cross-sectional. We studied the association of the baseline PTH and 25-hydroxycholecalciferol (25OHD) levels with the prospectively assessed deterioration of bone microarchitecture and in estimated bone strength in older men. Distal radius and tibia bone microarchitecture was assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT) at baseline, then after 4 and 8 years in 826 men aged 60-87 years. At distal radius, total bone mineral density (Tt.BMD), cortical thickness (Ct.Thd ), cortical area (Ct.Ar), cortical BMD (Ct.BMD), and trabecular BMD (Tb.BMD) decreased, whereas trabecular area (Tb.Ar) increased more rapidly in men with 25OHD ≤20 ng/mL versus the reference group (>30 ng/mL). Men with 25OHD ≤10 ng/mL had faster decrease in reaction force and failure load than men with 25OHD >30 ng/mL. At the distal tibia, Tt.BMD, Ct.Thd , Ct.Ar, Ct.BMD, failure load, and reaction force decreased, whereas Tb.Ar increased more rapidly in men with 25OHD between 10 and 20 ng/mL versus the reference group. The results were similar when 12 ng/mL was used as a threshold of severe vitamin D deficiency. At distal radius, men with PTH levels above the median (>44 pg/mL) had more rapid decrease in Tt.BMD, Ct.Ar, Ct.BMD, Ct.Thd , reaction force, and failure load, and more rapid increase in Tb.Ar versus the lowest quartile (≤34 pg/mL). At the distal tibia, men in the highest PTH quartile had faster decrease in Tt.BMD, Ct.Thd , Ct.Ar, Ct.BMD, reaction force, and failure load and faster increase in Tb.Ar versus the lowest quartile. The results were similar in men with glomerular filtration rate >60 mL/min. The results were similar in men who took no vitamin D or calcium supplements for 8 years. In summary, vitamin D deficiency and secondary hyperparathyroidism are associated with more rapid prospectively assessed cortical and trabecular bone decline in older men. © 2022 American Society for Bone and Mineral Research (ASBMR).
Assuntos
Hormônio Paratireóideo , Deficiência de Vitamina D , Masculino , Humanos , Idoso , Vitamina D , Calcifediol , Estudos Prospectivos , Estudos Transversais , Cálcio , Rádio (Anatomia)/diagnóstico por imagem , Densidade Óssea , Envelhecimento , Tíbia/diagnóstico por imagemRESUMO
Femoral neck areal bone mineral density (FN aBMD) is a key determinant of fracture risk in older adults; however, the majority of individuals who have a hip fracture are not considered osteoporotic according to their FN aBMD. This study uses novel tools to investigate the characteristics of bone microarchitecture that underpin bone fragility. Recent hip fracture patients (n = 108, 77% female) were compared with sex- and age-matched controls (n = 216) using high-resolution peripheral quantitative computed tomography (HR-pQCT) imaging of the distal radius and tibia. Standard morphological analysis of bone microarchitecture, micro-finite element analysis, and recently developed techniques to identify void spaces in bone microarchitecture were performed to evaluate differences between hip fracture patients and controls. In addition, a new approach for phenotyping bone microarchitecture was implemented to evaluate whether hip fractures in males and females occur more often in certain bone phenotypes. Overall, hip fracture patients had notable deterioration of bone microarchitecture and reduced bone mineral density compared with controls, especially at weight-bearing sites (tibia and femoral neck). Hip fracture patients were more likely to have void spaces present at either site and had void spaces that were two to four times larger on average when compared with non-fractured controls (p < 0.01). Finally, bone phenotyping revealed that hip fractures were significantly associated with the low density phenotype (p < 0.01), with the majority of patients classified in this phenotype (69%). However, female and male hip fracture populations were distributed differently across the bone phenotype continuum. These findings highlight how HR-pQCT can provide insight into the underlying mechanisms of bone fragility by using information about bone phenotypes and identification of microarchitectural defects (void spaces). The added information suggests that HR-pQCT can have a beneficial role in assessing the severity of structural deterioration in bone that is associated with osteoporotic hip fractures. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).
Assuntos
Fraturas do Quadril , Fraturas por Osteoporose , Masculino , Feminino , Humanos , Densidade Óssea , Fraturas por Osteoporose/diagnóstico por imagem , Rádio (Anatomia) , Colo do Fêmur/diagnóstico por imagem , Tíbia , Fraturas do Quadril/diagnóstico por imagem , Fenótipo , Absorciometria de Fóton/métodosRESUMO
Prevalence of osteoporosis is more than 50% in older adults, yet current clinical methods for diagnosis that rely on areal bone mineral density (aBMD) fail to detect most individuals who have a fragility fracture. Bone fragility can manifest in different forms, and a "one-size-fits-all" approach to diagnosis and management of osteoporosis may not be suitable. High-resolution peripheral quantitative computed tomography (HR-pQCT) provides additive information by capturing information about volumetric density and microarchitecture, but interpretation is challenging because of the complex interactions between the numerous properties measured. In this study, we propose that there are common combinations of bone properties, referred to as phenotypes, that are predisposed to different levels of fracture risk. Using HR-pQCT data from a multinational cohort (n = 5873, 71% female) between 40 and 96 years of age, we employed fuzzy c-means clustering, an unsupervised machine-learning method, to identify phenotypes of bone microarchitecture. Three clusters were identified, and using partial correlation analysis of HR-pQCT parameters, we characterized the clusters as low density, low volume, and healthy bone phenotypes. Most males were associated with the healthy bone phenotype, whereas females were more often associated with the low volume or low density bone phenotypes. Each phenotype had a significantly different cumulative hazard of major osteoporotic fracture (MOF) and of any incident osteoporotic fracture (p < 0.05). After adjustment for covariates (cohort, sex, and age), the low density followed by the low volume phenotype had the highest association with MOF (hazard ratio = 2.96 and 2.35, respectively), and significant associations were maintained when additionally adjusted for femoral neck aBMD (hazard ratio = 1.69 and 1.90, respectively). Further, within each phenotype, different imaging biomarkers of fracture were identified. These findings suggest that osteoporotic fracture risk is associated with bone phenotypes that capture key features of bone deterioration that are not distinguishable by aBMD. © 2021 American Society for Bone and Mineral Research (ASBMR).
Assuntos
Osteoporose , Fraturas por Osteoporose , Absorciometria de Fóton/métodos , Idoso , Densidade Óssea , Osso e Ossos/diagnóstico por imagem , Feminino , Humanos , Masculino , Osteoporose/complicações , Osteoporose/diagnóstico por imagem , Osteoporose/epidemiologia , Fraturas por Osteoporose/diagnóstico por imagem , Fraturas por Osteoporose/epidemiologia , FenótipoRESUMO
The application of high resolution peripheral quantitative computed tomography (HR-pQCT) for the study of bone health has provided valuable insight into the role bone microarchitecture has in determining bone strength and fracture risk. However, conventional density and morphological parameters struggle to distinguish whether localized bone loss is present, visible as heterogeneous deterioration in the trabecular network. This is because current HR-pQCT parameters quantify a global average of properties in the cortical or trabecular compartment. This study proposes a new metric we term "void space" that segments volumes of localized deterioration in the trabecular bone network from HR-pQCT scans and quantifies void space as the void space to total volume ratio (VS/TV, %). A simple and fully automated protocol for segmenting and quantifying void space in HR-pQCT scans is presented, along with the assessment of accuracy, precision, and cross-calibration between generations of HR-pQCT systems. Finally, prevalence of void space and the association with standard HR-pQCT parameters is demonstrated using a large population-based cohort (n = 1236). Void space detection was found to be highly reproducible (accuracy >95%, least significant change <1.76% VS/TV) and correlation between scanner generations was strong (R2 = 0.87), although the first generation system struggled to identify small voids. Assessment of void space prevalence in the population-based cohort revealed that void spaces were more common in females than males, prevalence increased with age, and void spaces were typically systemic (occurring at both scan sites rather than only one). A comparison of group-wise differences between participants with and without void space demonstrated that individuals with void spaces had significantly worse trabecular properties for both sexes and at both scan sites. Specifically, the median trabecular bone mineral density, bone volume fraction, and trabecular number were below the 25th percentile of the population, while trabecular separation and inhomogeneity were above the 75th percentile of the population in participants with void spaces. Cortical bone characteristics did not differ between participants with and without void spaces. When the void space region was excluded from morphological analysis so that only the remaining "functional bone" was considered, trabecular properties of participants with void spaces were greatly improved, especially for those who were the greatest outliers. Void space is an intuitive morphological parameter that captures localized deterioration in the trabecular bone network, and has the potential to provide valuable insight into the assessment of bone fragility.