RESUMO
On the basis of the kangaroo's pseudo-biped locomotion and its upright position, it could be assumed that the kangaroo might be an interesting model for spine research and that it may serve as a reasonable surrogate model for biomechanical in vitro tests. The purpose of this in vitro study was to provide biomechanical properties of the kangaroo spine and compare them with human spinal data from the literature. In addition, references to already published kangaroo anatomical spinal parameters will be discussed. Thirteen kangaroo spines from C4 to S4 were sectioned into single-motion segments. The specimens were tested by a spine tester under pure moments. The range of motion and neutral zone of each segment were determined in flexion and extension, right and left lateral bending and left and right axial rotation. Overall, we found greater flexibility in the kangaroo spine compared to the human spine. Similarities were only found in the cervical, lower thoracic and lumbar spinal regions. The range of motion of the kangaroo and human spines displayed comparable trends in the cervical (C4-C7), lower thoracic and lumbar regions independent of the motion plane. In the upper and middle thoracic regions, the flexibility of the kangaroo spine was considerably larger. These results suggested that the kangaroo specimens could be considered to be a surrogate, but only in particular cases, for biomechanical in vitro tests.
Assuntos
Macropodidae , Coluna Vertebral , Animais , Humanos , Amplitude de Movimento Articular , Rotação , Pescoço , Fenômenos BiomecânicosRESUMO
PURPOSE: Radiological degenerative phenotypes provide insight into a patient's overall extent of disease and can be predictive for future pathological developments as well as surgical outcomes and complications. The objective of this study was to develop a reliable method for automatically classifying sagittal MRI image stacks of cervical spinal segments with respect to these degenerative phenotypes. METHODS: We manually evaluated sagittal image data of the cervical spine of 873 patients (5182 motion segments) with respect to 5 radiological phenotypes. We then used this data set as ground truth for training a range of multi-class multi-label deep learning-based models to classify each motion segment automatically, on which we then performed hyper-parameter optimization. RESULTS: The ground truth evaluations turned out to be relatively balanced for the labels disc displacement posterior, osteophyte anterior superior, osteophyte posterior superior, and osteophyte posterior inferior. Although we could not identify a single model that worked equally well across all the labels, the 3D-convolutional approach turned out to be preferable for classifying all labels. CONCLUSIONS: Class imbalance in the training data and label noise made it difficult to achieve high predictive power for underrepresented classes. This shortcoming will be mitigated in the future versions by extending the training data set accordingly. Nevertheless, the classification performance rivals and in some cases surpasses that of human raters, while speeding up the evaluation process to only require a few seconds.
Assuntos
Osteófito , Humanos , Vértebras Cervicais/cirurgia , Pescoço , Radiografia , Imageamento por Ressonância Magnética/métodosRESUMO
The morphology of the rib cage affects both the biomechanics of the upper body's musculoskeletal structure and the respiratory mechanics. This becomes particularly important when evaluating skeletal deformities, as in adolescent idiopathic scoliosis (AIS). The aim of this study was to identify morphological characteristics of the rib cage in relation to the lung in patients with non-deformed and scoliotic spines. Computed tomography data of 40 patients without any visible spinal abnormalities (healthy group) and 21 patients with AIS were obtained retrospectively. All bony structures as well as the right and left lung were reconstructed using image segmentation. Morphological parameters were calculated based on the distances between characteristic morphological landmarks. These parameters included the rib position, length, and area, the rib cage depth and width, and the rib inclination angle on either side, as well as the spinal height and length. Furthermore, we determined the left and right lung volumes, and the area of contact between the rib cage and lung. Differences between healthy and scoliotic spines were statistically analysed using the t-test for unpaired data. The rib cage of the AIS group was significantly deformed in the dorso-ventral and medio-lateral directions. The anatomical proximity of the lung to the ribs was nearly symmetrical in the healthy group. By contrast, within the AIS group, the lung covered a significantly greater area on the left side of the rib cage at large thoracic deformities. Within the levels T1-T6, no significant difference in the rib length, depth to width relationship, or area was observed between the healthy and AIS groups. Inferior to the lung (T7-T12), these parameters exhibited greater variability. The ratio between the width of the rib cage at T6 and the thoracic spinal height (T1-T12) was significantly increased within the thoracic AIS group (1.1 ± 0.08) compared with the healthy group (1.0 ± 0.05). No statistical differences were found between the lung volumes among all the groups. While the rib cage was frequently strongly deformed in the AIS group, the lung and its surrounding ribs appeared to be normally developed. The observed rib hump in AIS appeared to be formed particularly by a more ventral position of the ribs on the concave side. Furthermore, the rib cage width to spinal height ratio suggested that the spinal height of the thoracic AIS-spine is reduced. This indicates that the spine would gain its growth-related height after correcting the spinal deformity. These are the important aspects to consider in the aetiology research and orthopaedic treatment of AIS.
Assuntos
Cifose , Escoliose , Adolescente , Humanos , Pulmão/diagnóstico por imagem , Estudos Retrospectivos , Caixa Torácica/diagnóstico por imagem , Escoliose/diagnóstico por imagem , Vértebras Torácicas/diagnóstico por imagemRESUMO
Abdominal trauma (AT) is of major global importance, particularly with the increased potential for civil, terroristic, and military trauma. The injury pattern and systemic consequences of blunt abdominal injuries are highly variable and frequently underestimated or even missed, and the pathomechanisms remain still poorly understood. Therefore, we investigated the temporal-spatial organ and immune response after a standardized blast-induced blunt AT. Anesthetized mice were exposed to a single blast wave centered on the epigastrium. At 2, 6, or 24 h after trauma, abdominal organ damage was assessed macroscopically, microscopically, and biochemically. A higher degree of trauma severity, determined by a reduction of the distance between the epigastrium and blast inductor, was reflected by a reduced survival rate. The hemodynamic monitoring during the first 120 min after AT revealed a decline in the mean arterial pressure within the first 80 min, whereas the heart rate remained quite stable. AT induced a systemic damage and inflammatory response, evidenced by elevated HMGB-1 and IL-6 plasma levels. The macroscopic injury pattern of the abdominal organs (while complex) was consistent, with the following frequency: liver > pancreas > spleen > left kidney > intestine > right kidney > others > lungs and was reflected by microscopic liver and pancreas damages. Plasma levels of organ dysfunction markers increased during the first 6 h after AT and subsequently declined, indicating an early, temporal impairment of the function on a multi-organ level. The established highly reproducible murine blunt AT, with time- and trauma-severity-dependent organ injury patterns, systemic inflammatory response, and impairment of various organ functions, reflects characteristics of human AT. In the future, this model may help to study the complex immuno-pathophysiological consequences and innovative therapeutic approaches after blunt AT.
Assuntos
Traumatismos Abdominais/complicações , Injúria Renal Aguda/patologia , Traumatismos por Explosões/complicações , Fígado/patologia , Traumatismo Múltiplo/complicações , Pâncreas/patologia , Injúria Renal Aguda/etiologia , Animais , Fígado/lesões , Fígado/metabolismo , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Pâncreas/lesões , Pâncreas/metabolismoRESUMO
PURPOSE: The aim of this study was to assess the validity and objectivity of a new quantitative radiographic grading system for thoracic intervertebral disc degeneration. METHODS: The new grading system involves the measurement variables "Height loss" and "Osteophyte formation", which are determined from lateral radiographs, resulting in the "Overall degree of degeneration" on a four-point scale from 0 (no degeneration) to 3 (severe degeneration). Validation was performed by comparing the radiographic degrees of degeneration of 54 human intervertebral discs to the respective macroscopic degrees, which were defined as the "real" degrees of degeneration. Interobserver agreement was examined using radiographs of 135 human thoracic intervertebral discs. Agreement was quantified by means of quadratically weighted Kappa coefficients with 95% confidence limits (CL). RESULTS: Validation revealed almost perfect agreement between the radiographic and the macroscopic overall degrees of degeneration (Kappa 0.968, CL 0.944-0.991), while the macroscopic grades tended to be underestimated in low degeneration grades. Radiographic grading of two independent observers also exhibited almost perfect agreement (Kappa 0.883, CL 0.824-0.941) as well as tendencies towards rater-dependent differences in low degeneration grades. CONCLUSION: The new quantitative radiographic grading scheme represents a valid, reliable, and almost objective method for assessing the degree of degeneration of individual thoracic intervertebral discs. Potential effects of interindividual variations and the radiographic superimposition of anatomical structures represent a limitation of this method should be taken into account when using the grading system for clinical and experimental purposes, especially with regard to specific morphological as well as patient- and donor-specific characteristics.
Assuntos
Degeneração do Disco Intervertebral , Deslocamento do Disco Intervertebral , Disco Intervertebral , Humanos , Disco Intervertebral/diagnóstico por imagem , Degeneração do Disco Intervertebral/diagnóstico por imagem , Deslocamento do Disco Intervertebral/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Variações Dependentes do Observador , Radiografia , Reprodutibilidade dos TestesRESUMO
PURPOSE: Imaging studies about the relevance of muscles in spinal disorders, and sarcopenia in general, require the segmentation of the muscles in the images which is very labour-intensive if performed manually and poses a practical limit to the number of investigated subjects. This study aimed at developing a deep learning-based tool able to fully automatically perform an accurate segmentation of the lumbar muscles in axial MRI scans, and at validating the new tool on an external dataset. METHODS: A set of 60 axial MRI images of the lumbar spine was retrospectively collected from a clinical database. Psoas major, quadratus lumborum, erector spinae, and multifidus were manually segmented in all available slices. The dataset was used to train and validate a deep neural network able to segment muscles automatically. Subsequently, the network was externally validated on images purposely acquired from 22 healthy volunteers. RESULTS: The median Jaccard index for the individual muscles calculated for the 22 subjects of the external validation set ranged between 0.862 and 0.935, demonstrating a generally excellent performance of the network, although occasional failures were noted. Cross-sectional area and fat fraction of the muscles were in agreement with published data. CONCLUSIONS: The externally validated deep neural network was able to perform the segmentation of the paravertebral muscles in an accurate and fully automated manner, although it is not without limitations. The model is therefore a suitable research tool to perform large-scale studies in the field of spinal disorders and sarcopenia, overcoming the limitations of non-automated methods.
Assuntos
Aprendizado Profundo , Sarcopenia , Humanos , Região Lombossacral/diagnóstico por imagem , Região Lombossacral/patologia , Imageamento por Ressonância Magnética/métodos , Músculos , Músculos Paraespinais/diagnóstico por imagem , Estudos Retrospectivos , Sarcopenia/patologiaRESUMO
PURPOSE: Surgical treatment of thoracolumbar A3-fractures usually comprises posterior fixation-in neutral position or distraction-potentially followed by subsequent anterior support. We hypothesized that additional posterior compression in circumferential stabilization may increase stability by locking the facets, and better restore the sagittal profile. METHODS: Burst fractures Type A3 were created in six fresh frozen cadaver spine segments (T12-L2). Testing was performed in a custom-made spinal loading simulator. Loads were applied as pure bending moments of ± 3.75 Nm in all six movement axes. We checked range of motion, neutral zone and Cobb's angle over the injured/treated segment within the following conditions: Intact, fractured, instrumented in neutral alignment, instrumented in distraction, with cage left in posterior distraction, with cage with posterior compression. RESULTS: We found that both types of instrumentation with cage stabilized the segment compared to the fractured state in all motion planes. For flexion/extension and lateral bending, flexibility was decreased even compared to the intact state, however, not in axial rotation, being the most critical movement axis. Additional posterior compression in the presence of a cage significantly decreased flexibility in axial rotation, thus achieving stability comparable to the intact state even in this movement axis. In addition, posterior compression with cage significantly increased lordosis compared to the distracted state. CONCLUSION: Among different surgical modifications tested, circumferential fixation with final posterior compression as the last step resulted in superior stability and improved sagittal alignment. Thus, posterior compression as the last step is recommended in these pathologies.
Assuntos
Fraturas da Coluna Vertebral , Articulação Zigapofisária , Animais , Fenômenos Biomecânicos , Cadáver , Humanos , Vértebras Lombares/cirurgia , Amplitude de Movimento Articular , Fraturas da Coluna Vertebral/cirurgiaRESUMO
PURPOSE: The field of artificial intelligence is ever growing and the applications of machine learning in spine care are continuously advancing. Given the advent of the intelligence-based spine care model, understanding the evolution of computation as it applies to diagnosis, treatment, and adverse event prediction is of great importance. Therefore, the current review sought to synthesize findings from the literature at the interface of artificial intelligence and spine research. METHODS: A narrative review was performed based on the literature of three databases (MEDLINE, CINAHL, and Scopus) from January 2015 to March 2021 that examined historical and recent advancements in the understanding of artificial intelligence and machine learning in spine research. Studies were appraised for their role in, or description of, advancements within image recognition and predictive modeling for spinal research. Only English articles that fulfilled inclusion criteria were ultimately incorporated in this review. RESULTS: This review briefly summarizes the history and applications of artificial intelligence and machine learning in spine. Three basic machine learning training paradigms: supervised learning, unsupervised learning, and reinforced learning are also discussed. Artificial intelligence and machine learning have been utilized in almost every facet of spine ranging from localization and segmentation techniques in spinal imaging to pathology specific algorithms which include but not limited to; preoperative risk assessment of postoperative complications, screening algorithms for patients at risk of osteoporosis and clustering analysis to identify subgroups within adolescent idiopathic scoliosis. The future of artificial intelligence and machine learning in spine surgery is also discussed with focusing on novel algorithms, data collection techniques and increased utilization of automated systems. CONCLUSION: Improvements to modern-day computing and accessibility to various imaging modalities allow for innovative discoveries that may arise, for example, from management. Given the imminent future of AI in spine surgery, it is of great importance that practitioners continue to inform themselves regarding AI, its goals, use, and progression. In the future, it will be critical for the spine specialist to be able to discern the utility of novel AI research, particularly as it continues to pervade facets of everyday spine surgery.
Assuntos
Inteligência Artificial , Aprendizado de Máquina , Adolescente , Algoritmos , HumanosRESUMO
BACKGROUND: As big data and artificial intelligence (AI) in spine care, and medicine as a whole, continue to be at the forefront of research, careful consideration to the quality and techniques utilized is necessary. Predictive modeling, data science, and deep analytics have taken center stage. Within that space, AI and machine learning (ML) approaches toward the use of spine imaging have gathered considerable attention in the past decade. Although several benefits of such applications exist, limitations are also present and need to be considered. PURPOSE: The following narrative review presents the current status of AI, in particular, ML, with special regard to imaging studies, in the field of spinal research. METHODS: A multi-database assessment of the literature was conducted up to September 1, 2021, that addressed AI as it related to imaging of the spine. Articles written in English were selected and critically assessed. RESULTS: Overall, the review discussed the limitations, data quality and applications of ML models in the context of spine imaging. In particular, we addressed the data quality and ML algorithms in spine imaging research by describing preliminary results from a widely accessible imaging algorithm that is currently available for spine specialists to reference for information on severity of spine disease and degeneration which ultimately may alter clinical decision-making. In addition, awareness of the current, under-recognized regulation surrounding the execution of ML for spine imaging was raised. CONCLUSIONS: Recommendations were provided for conducting high-quality, standardized AI applications for spine imaging.
Assuntos
Inteligência Artificial , Doenças da Coluna Vertebral , Algoritmos , Humanos , Aprendizado de Máquina , Doenças da Coluna Vertebral/diagnóstico por imagemRESUMO
PURPOSE: Anterior cervical discectomy and fusion (ACDF) is a common surgical treatment for degenerative disease in the cervical spine. However, resultant biomechanical alterations may predispose to early-onset adjacent segment degeneration (EO-ASD), which may become symptomatic and require reoperation. This study aimed to develop and validate a machine learning (ML) model to predict EO-ASD following ACDF. METHODS: Retrospective review of prospectively collected data of patients undergoing ACDF at a quaternary referral medical center was performed. Patients > 18 years of age with > 6 months of follow-up and complete pre- and postoperative X-ray and MRI imaging were included. An ML-based algorithm was developed to predict EO-ASD based on preoperative demographic, clinical, and radiographic parameters, and model performance was evaluated according to discrimination and overall performance. RESULTS: In total, 366 ACDF patients were included (50.8% male, mean age 51.4 ± 11.1 years). Over 18.7 ± 20.9 months of follow-up, 97 (26.5%) patients developed EO-ASD. The model demonstrated good discrimination and overall performance according to precision (EO-ASD: 0.70, non-ASD: 0.88), recall (EO-ASD: 0.73, non-ASD: 0.87), accuracy (0.82), F1-score (0.79), Brier score (0.203), and AUC (0.794), with C4/C5 posterior disc bulge, C4/C5 anterior disc bulge, C6 posterior superior osteophyte, presence of osteophytes, and C6/C7 anterior disc bulge identified as the most important predictive features. CONCLUSIONS: Through an ML approach, the model identified risk factors and predicted development of EO-ASD following ACDF with good discrimination and overall performance. By addressing the shortcomings of traditional statistics, ML techniques can support discovery, clinical decision-making, and precision-based spine care.
Assuntos
Degeneração do Disco Intervertebral , Fusão Vertebral , Adulto , Inteligência Artificial , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/cirurgia , Discotomia/efeitos adversos , Discotomia/métodos , Feminino , Humanos , Lactente , Degeneração do Disco Intervertebral/diagnóstico por imagem , Degeneração do Disco Intervertebral/etiologia , Degeneração do Disco Intervertebral/cirurgia , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Fusão Vertebral/efeitos adversos , Fusão Vertebral/métodosRESUMO
BACKGROUND: Astronauts have a higher risk of cervical intervertebral disc herniation. Several mechanisms have been attributed as causative factors for this increased risk. However, most of the previous studies have examined potential causal factors for lumbar intervertebral disc herniation only. Hence, we aim to conduct a study to identify the various changes in the cervical spine that lead to an increased risk of cervical disc herniation after spaceflight. METHODS: A cohort study with astronauts will be conducted. The data collection will involve four main components: a) Magnetic resonance imaging (MRI); b) cervical 3D kinematics; c) an Integrated Protocol consisting of maximal and submaximal voluntary contractions of the neck muscles, endurance testing of the neck muscles, neck muscle fatigue testing and questionnaires; and d) dual energy X-ray absorptiometry (DXA) examination. Measurements will be conducted at several time points before and after astronauts visit the International Space Station. The main outcomes of interest are adaptations in the cervical discs, muscles and bones. DISCUSSION: Astronauts are at higher risk of cervical disc herniation, but contributing factors remain unclear. The results of this study will inform future preventive measures for astronauts and will also contribute to the understanding of intervertebral disc herniation risk in the cervical spine for people on Earth. In addition, we anticipate deeper insight into the aetiology of neck pain with this research project. TRIAL REGISTRATION: German Clinical Trials Register, DRKS00026777. Registered on 08 October 2021.
Assuntos
Deslocamento do Disco Intervertebral , Voo Espacial , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/patologia , Estudos de Coortes , Humanos , Deslocamento do Disco Intervertebral/diagnóstico por imagem , Deslocamento do Disco Intervertebral/epidemiologia , Deslocamento do Disco Intervertebral/etiologia , Músculos do Pescoço/diagnóstico por imagemRESUMO
Background and Objectives: Spinal fusion is an effective and widely accepted intervention. However, complications such as non-unions and hardware failures are frequently observed. Radiologic imaging and physical examination are still the gold standards in the assessment of spinal fusion, despite multiple limitations including radiation exposure and subjective image interpretation. Furthermore, current diagnostic methods only allow fusion assessment at certain time points and require the patient's presence at the hospital or medical practice. A recently introduced implantable sensor system for continuous and wireless implant load monitoring in trauma applications carries the potential to overcome these drawbacks, but transferability of the principle to the spine has not been demonstrated yet. Materials and Methods: The existing trauma sensor was modified for attachment to a standard pedicle-screw-rod system. Two lumbar segments (L2 to L4) of one Swiss white alpine sheep were asymmetrically instrumented. After facetectomy, three sensors were attached to the rods between each screw pair and activated for measurement. The sheep was euthanized 16 weeks postoperatively. After radiological assessment the spine was explanted and loaded in flexion-extension to determine the range of motion of the spinal segments. Sensor data were compared with mechanical test results and radiologic findings. Results: The sensors measured physiological rod loading autonomously over the observation period and delivered the data daily to bonded smartphones. At euthanasia the relative rod load dropped to 67% of the respective maximum value for the L23 segment and to 30% for the L34 segment. In agreement, the total range of motion of both operated segments was lower compared to an intact reference segment (L23: 0.57°; L34: 0.49°; intact L45: 4.17°). Radiologic assessment revealed fusion mass in the facet joint gaps and bilateral bridging bone around the joints at both operated segments. Conclusions: Observations of this single-case study confirm the basic ability of continuous rod load measurement to resolve the spinal fusion process as indicated by a declining rod load with progressing bone fusion. A strong clinical potential of such technology is eminent, but further data must be collected for final proof of principle.
Assuntos
Doenças da Coluna Vertebral , Fusão Vertebral , Animais , Fenômenos Biomecânicos , Parafusos Ósseos , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Amplitude de Movimento Articular/fisiologia , Ovinos , Fusão Vertebral/métodosRESUMO
The upright posture of the kangaroo suggests that the spine of the kangaroo could be a possible substitute model for biomechanical studies of the human spine. A prerequisite for this should be the agreement of anatomy in humans and kangaroos. The purpose of this study was to investigate the anatomical parameters of the kangaroo spine from C4 to S4 and compare them with existing anatomical data of the human spine. Eight complete spines of the red giant kangaroo were obtained and 21 anatomical parameters were measured from the vertebral bodies, spinal canal, endplate, pedicles, intervertebral discs, transverse, and spinous processes. Most similarities between kangaroo and human spines were found for the vertebral bodies in the cervical and the lumbar spine. The largest differences were evident for the spinous processes. Although both species are somehow upright, these differences may be explained by the way how they move. Jumping probably requires more muscle strength than walking on two legs.
Assuntos
Macropodidae/anatomia & histologia , Coluna Vertebral/anatomia & histologia , Animais , Biometria , HumanosRESUMO
PURPOSE: Possible surgical therapies for odontoid fracture type IIb include odontoid screw osteosynthesis (OG) with preservation of mobility or dorsal C1/2 fusion with restriction of cervical rotation. In order to reduce material loosening in odontoid screw osteosynthesis in patients with low bone density, augmentation at the base of the axis using bone cement has been established as a suitable alternative. In this study, we compared cement-augmented OG and C1/2 fusion according to Harms (HG). METHODS: Body donor preparations of the 1st and 2nd cervical vertebrae were randomized in 2 groups (OG vs. HG). The range of motion (ROM) was determined in 3 principle motion plains. Subsequently, a cyclic loading test was performed. The decrease in height of the specimen and the double amplitude height were determined as absolute values as an indication of screw loosening. Afterward, the ROM was determined again and loosening of the screws was measured in a computed tomography. RESULTS: A total of 16 were included. Two groups of 8 specimens (OG vs. HG) from patients with a median age of 80 (interquartile range (IQ) 73.5-85) years and a reduced bone density of 87.2 (IQ 71.2-104.5) mg/cc dipotassium hydrogen phosphate were examined for their biomechanical properties. Before and after exposure, the OG preparations were significantly more mobile. At the time of loading, the OG had similar loading properties to HG decrease in height of the specimen and the double amplitude height. Computed tomography revealed similar outcomes with regard to the screw loosening rate (62.5 vs. 87.5%, p = 0.586). CONCLUSION: In patients with an odontoid fracture type IIb and reduced bone density, cement-augmented odontoid screw yielded similar properties in the loading tests compared to the HG. It may, therefore, be considered as a primary alternative to preserve cervical mobility in these patients.
Assuntos
Processo Odontoide , Fraturas da Coluna Vertebral , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Cimentos Ósseos/uso terapêutico , Parafusos Ósseos , Fixação Interna de Fraturas , Humanos , Processo Odontoide/diagnóstico por imagem , Processo Odontoide/lesões , Processo Odontoide/cirurgia , Fraturas da Coluna Vertebral/diagnóstico por imagem , Fraturas da Coluna Vertebral/cirurgiaRESUMO
PURPOSE: To clarify the relative influence of age, sex, disc height loss and T1 slope on upper (Occiput-C2) and lower cervical lordosis (C2-C7). METHODS: Standing lateral cervical radiographs of 865 adult subjects were evaluated. The presence and severity of disc height loss from C2/C3 to C6/C7 (a total of 4325 discs) were assessed using a validated grading system. The total disc height loss score for each subject was calculated as the sum of the score of each disc space. Sagittal radiographic parameters included: occipital slope, occiput-C2 (Oc-C2) lordosis, C2-C7 lordosis and T1 slope. Multivariable regression analyses were performed to examine the relative influence of the multiple factors on upper and lower cervical lordosis. RESULTS: This study included 360 males and 505 females, with a mean age of 40.2 ± 16.0 years (range, 20-95 years). Linear multivariate regression analyses showed that greater age, male sex, greater T1 slope were each found to be significantly and independently associated with greater C2-C7 lordosis, whereas total disc height loss score was negatively associated with C2-C7 lordosis. T1 slope had the most independent influence on C2-C7 lordosis among these factors. Age, sex and disc height loss were not independently associated with Oc-C2 lordosis. CONCLUSIONS: Results from our large-scale radiologic analysis may enhance the understanding of the factors that affect cervical lordosis, indicating that age, sex, disc height loss and T1 slope were each independently associated with C2-C7 lordosis. However, age, sex and disc height loss were not independently associated with upper cervical lordosis.
Assuntos
Lordose , Adulto , Idoso , Idoso de 80 Anos ou mais , Vértebras Cervicais/diagnóstico por imagem , Feminino , Cabeça , Humanos , Lordose/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Radiografia , Estudos Retrospectivos , Posição Ortostática , Adulto JovemRESUMO
PURPOSE: We investigated the flexion-extension range of motion and centre of rotation of lumbar motion segments in a large population of 602 patients (3612 levels), and the associations between lumbar motion and other parameters such as sex, age and intervertebral disc degeneration. METHODS: Lumbar radiographs in flexion-extension of 602 patients suffering from low back pain and/or suspect instability were collected; magnetic resonance images were retrieved and used to score the degree of disc degeneration for a subgroup of 354 patients. Range of motion and centre of rotation were calculated for all lumbosacral levels with in-house software allowing for high degree of automation. Associations between motion parameters and age, sex, spinal level and disc degeneration were then assessed. RESULTS: The median range of motion was 6.6° (range 0.1-28.9°). Associations between range of motion and age as well as spinal level, but not sex, were found. Disc degeneration determined a consistent reduction in the range of motion. The centre of rotation was most commonly located at the centre of the lower endplate or slightly lower. With progressive degeneration, centres of rotation were increasingly dispersed with no preferential directions. CONCLUSION: This study constitutes the largest analysis of the in vivo lumbar motion currently available and covers a wide range of clinical scenarios in terms of age and degeneration. Findings confirmed that ageing determines a reduction in the mobility independently of degeneration and that in degenerative levels, centres of rotation are dispersed around the centre of the intervertebral space.
Assuntos
Distinções e Prêmios , Degeneração do Disco Intervertebral , Dor Lombar , Big Data , Bioengenharia , Fenômenos Biomecânicos , Humanos , Vértebras Lombares , Amplitude de Movimento ArticularRESUMO
PURPOSE: Prevention of implant subsidence in osteoporotic (thoraco)lumbar spines is still a major challenge in spinal surgery. In this study, a new biomechanical in vitro test method was developed to simulate patient activities in order to determine the subsidence risk of vertebral body replacements during physiologic loading conditions. METHODS: The study included 12 (thoraco)lumbar (T11-L1, L2-L4) human specimens. After dorsal stabilisation and corpectomy, vertebral body replacements (VBR) with (a) round centrally located and (b) lateral end pieces with apophyseal support were implanted, equally distributed regarding segment, sex, mean BMD ((a) 64.2 mgCaHA/cm3, (b) 66.7 mgCaHA/cm3) and age ((a) 78 years, (b) 73.5 years). The specimens were then subjected to everyday activities (climbing stairs, tying shoes, lifting 20 kg) simulated by a custom-made dynamic loading simulator combining corresponding axial loads with flexion-extension and lateral bending movements. They were applied in oscillating waves at 0.5 Hz and raised every 100 cycles phase-shifted to each other by 50 N or 0.25°, respectively. The range of motion (ROM) of the specimens was determined in all three motion planes under pure moments of 3.75 Nm prior to and after implantation as well as subsequently following activities. Simultaneously, subsidence depth was quantified from fluoroscope films. A mixed model (significance level: 0.05) was established to relate subsidence risk to implant geometries and patients' activities. RESULTS: With this new test method, simulating everyday activities provoked clinically relevant subsidence schemes. Generally, severe everyday activities caused deeper subsidence which resulted in increased ROM. Subsidence of lateral end pieces was remarkably less pronounced which was accompanied by a smaller ROM in flexion-extension and higher motion possibilities in axial rotation (p = 0.05). CONCLUSION: In this study, a new biomechanical test method was developed that simulates physiologic activities to examine implant subsidence. It appears that the highest risk of subsidence occurs most when lifting heavy weights, and into the ventral part of the caudal vertebra. The results indicate that lateral end pieces may better prevent from implant subsidence because of the additional cortical support. Generally, patients that are treated with a VBR should avoid activities that create high loading on the spine.
Assuntos
Distinções e Prêmios , Fusão Vertebral , Idoso , Fenômenos Biomecânicos , Humanos , Técnicas In Vitro , Vértebras Lombares , Amplitude de Movimento Articular , Corpo VertebralRESUMO
PURPOSE: In an osteoporotic vertebral body, cement-augmented pedicle screw fixation could possibly be optimized by the creation of an initial cavity. The aim of this study is to compare three test groups with regard to their loosening characteristics under cyclic loading. METHODS: Eighteen human, osteoporotic spine segments were divided in three groups. Flexibility tests and cyclic loading tests were performed with an internal fixator. The screws were fixed after creation a cavity and with cement (cavity-augmented group), without cavity and with cement (augmented group), and without cavity and without cement (control group). Cyclic loading up to 100,000 cycles was applied with a complex loading protocol. Screw loosening was measured with flexibility tests after implantation and after cyclic loading. Cement distribution was visualized from CT scans. RESULTS: In all groups, range of motion increased during cyclic loading, representing significant screw loosening after 100,000 cycles. In both augmented groups, screw loosening was less pronounced than in the control group. The cavity-augmented group showed only a slight tendency of screw loosening, but with smaller variations compared to both other groups. This may be explained with a trend for a more equal and homogeneous cement volume around each tip for the cavity-augmented group. CONCLUSION: This study demonstrated that creating a cavity may allow a more equal fixation of all pedicle screws with slight reduction of loosening. However, augmentation only through a cannulated screw is almost equivalent, if care is taken that enough cement volume can be pushed out around the tip of the screw.
Assuntos
Parafusos Pediculares , Fenômenos Biomecânicos , Cimentos Ósseos , Cadáver , Humanos , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Coluna VertebralRESUMO
PURPOSE: The aims of this study were (1) to determine the prevalence of radiographic cervical disc degeneration in a large population of patients aged from 18 to 97 years; (2) to investigate individually the prevalence and distribution of height loss, osteophyte formation, endplate sclerosis and spondylolisthesis; and (3) to describe the patterns of cervical disc degeneration. METHODS: A retrospective study was performed. Standard lateral cervical spine radiographs in standing, neutral position of 1581 consecutive patients (723 males, 858 females) with an average age of 41.2 ± 18.2 years were evaluated. Cervical disc degeneration was graded from C2/C3 to C6/C7 based on a validated quantitative grading system. The prevalence and distribution of radiographic findings were evaluated and associations with age were investigated. RESULTS: 53.9% of individuals had radiographic disc degeneration and the most affected level was C5/C6. The presence and severity of disc degeneration were found to be significantly associated with age both in male and female subjects. The most frequent and severe occurrences of height loss, osteophyte formation, and endplate sclerosis were at C5/C6, whereas spondylolisthesis was most observed at C4/C5. Age was significantly correlated with radiographic degenerative findings. Contiguous levels degeneration pattern was more likely found than skipped level degeneration. The number of degenerated levels was also associated with age. CONCLUSIONS: The presence and severity of radiographic disc degeneration increased with aging in the cervical spine. Older age was associated with greater number of degenerated disc levels. Furthermore, the correlations between age and the degree of degenerative findings were stronger at C5/C6 and C6/C7 than at other cervical spinal levels.
Assuntos
Degeneração do Disco Intervertebral , Osteoartrite da Coluna Vertebral , Espondilolistese , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Vértebras Cervicais/diagnóstico por imagem , Feminino , Humanos , Degeneração do Disco Intervertebral/diagnóstico por imagem , Degeneração do Disco Intervertebral/epidemiologia , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Adulto JovemRESUMO
Many recent studies have focused on the functional and clinical importance of cervical lordosis. However, there is little accurate knowledge of the anatomical parameters that constitute cervical lordosis (i.e., the sagittal wedging angles of intervertebral discs and vertebral bodies) and their associations with age and sex. Standing lateral cervical radiographs of 1020 subjects (424 males, 596 females) with a mean age of 36.6 ± 17.0 years (range 7-95 years) were evaluated retrospectively. Cervical lordosis, the sum of intervertebral disc wedging angles from C2/C3 to C6/C7 and the sum of vertebral body wedging angles from C3 to C7 were measured. The sum of intervertebral disc wedging and the sum of vertebral body wedging were 20.6° ± 14.7° and -12.8° ± 10.3°, respectively. The sum of intervertebral disc wedging increased significantly with age and was significantly greater in males than females, whereas there was no sex-related difference in the sum of vertebral body wedging. The sum of intervertebral disc wedging was negatively correlated with sum of vertebral body wedging. Wedging of discs contributed to C2-C7 cervical lordosis more significantly than wedging of vertebral bodies. There were moderate positive correlations between cervical lordosis and intervertebral disc wedging angles at C3/C4, C4/C5 and C5/C6; weak correlations were observed at C2/C3 and C6/C7. This study constitutes the largest currently available analysis comprehensively documenting the anatomical characteristics of sagittal wedging of intervertebral discs and vertebral bodies in the cervical spine. The findings could improve understanding of the internal architecture of cervical lordosis among clinicians.