Copper-sulfenate complex from oxidation of a cavity mutant of Pseudomonas aeruginosa azurin.

Metal-sulfenate centers are known to play important roles in biology and yet only limited examples are known due to their instability and high reactivity. Herein we report a copper-sulfenate complex characterized in a protein environment, formed at the active site of a cavity mutant of an electron transfer protein, type 1 blue copper azurin. Reaction of hydrogen peroxide with Cu(I)-M121G azurin resulted in a species with strong visible absorptions at 350 and 452 nm and a relatively low electron paramagnetic resonance gz value of 2.169 in comparison with other normal type 2 copper centers. The presence of a side-on copper-sulfenate species is supported by resonance Raman spectroscopy, electrospray mass spectrometry using isotopically enriched hydrogen peroxide, and density functional theory calculations correlated to the experimental data. In contrast, the reaction with Cu(II)-M121G or Zn(II)-M121G azurin under the same conditions did not result in Cys oxidation or copper-sulfenate formation. Structural and computational studies strongly suggest that the secondary coordination sphere noncovalent interactions are critical in stabilizing this highly reactive species, which can further react with oxygen to form a sulfinate and then a sulfonate species, as demonstrated by mass spectrometry. Engineering the electron transfer protein azurin into an active copper enzyme that forms a copper-sulfenate center and demonstrating the importance of noncovalent secondary sphere interactions in stabilizing it constitute important contributions toward the understanding of metal-sulfenate species in biological systems.

A [Cu2O]2+ core in Cu-ZSM-5, the active site in the oxidation of methane to methanol.

Driven by the depletion of crude oil, the direct oxidation of methane to methanol has been of considerable interest. Promising low-temperature activity of an oxygen-activated zeolite, Cu-ZSM-5, has recently been reported in this selective oxidation and the active site in this reaction correlates with an absorption feature at 22,700 cm(-1). In the present study, this absorption band is used to selectively resonance enhance Raman vibrations of this active site. (18)O(2) labeling experiments allow definitive assignment of the observed vibrations and exclude all previously characterized copper-oxygen species for the active site. In combination with DFT and normal coordinate analysis calculations, the oxygen activated Cu core is uniquely defined as a bent mono-(mu-oxo)dicupric site. Spectroscopically validated electronic structure calculations show polarization of the low-lying singly-occupied molecular orbital of the [Cu(2)O](2+) core, which is directed into the zeolite channel, upon approach of CH(4). This induces significant oxyl character into the bridging O atom leading to a low transition state energy consistent with experiment and explains why the bent mono-(mu-oxo)dicupric core is highly activated for H atom abstraction from CH(4). The oxygen intermediate of Cu-ZSM-5 is now the most well defined species active in the methane monooxygenase reaction.

Oxygen precursor to the reactive intermediate in methanol synthesis by Cu-ZSM-5.

The reactive oxidizing species in the selective oxidation of methane to methanol in oxygen activated Cu-ZSM-5 was recently defined to be a bent mono(µ-oxo)dicopper(II) species, [Cu(2)O](2+). In this communication we report the formation of an O(2)-precursor of this reactive site with an associated absorption band at 29,000 cm(-1). Laser excitation into this absorption feature yields a resonance Raman (rR) spectrum characterized by (18)O(2) isotope sensitive and insensitive vibrations, νO-O and νCu-Cu, at 736 (Δ(18)O(2) = 41 cm(-1)) and 269 cm(-1), respectively. These define the precursor to be a µ-(η(2):η(2)) peroxo dicopper(II) species, [Cu(2)(O(2))](2+). rR experiments in combination with UV-vis absorption data show that this [Cu(2)(O(2))](2+) species transforms directly into the [Cu(2)O](2+) reactive site. Spectator Cu(+) sites in the zeolite ion-exchange sites provide the two electrons required to break the peroxo bond in the precursor. O(2)-TPD experiments with (18)O(2) show the incorporation of the second (18)O atom into the zeolite lattice in the transformation of [Cu(2)(O(2))](2+) into [Cu(2)O](2+). This study defines the mechanism of oxo-active site formation in Cu-ZSM-5.

Transition-metal ions in zeolites: coordination and activation of oxygen.

Zeolites containing transition-metal ions (TMIs) often show promising activity as heterogeneous catalysts in pollution abatement and selective oxidation reactions. In this paper, two aspects of research on the TMIs Cu, Co, and Fe in zeolites are discussed: (i) coordination to the lattice and (ii) activated oxygen species. At low loading, TMIs preferably occupy exchange sites in six-membered oxygen rings (6MR), where the TMIs preferentially coordinate with the O atoms of Al tetrahedra. High TMI loadings result in a variety of TMI species formed at the zeolite surface. Removal of the extralattice O atoms during high-temperature pretreatments can result in autoreduction. Oxidation of reduced TMI sites often results in the formation of highly reactive oxygen species. In Cu-ZSM-5, calcination with O(2) results in the formation of a species, which was found to be a crucial intermediate in both the direct decomposition of NO and N(2)O and the selective oxidation of methane into methanol. An activated oxygen species, called alpha-O, is formed in Fe-ZSM5 and reported to be the active site in the partial oxidation of methane and benzene into methanol and phenol, respectively. However, this reactive alpha-O can only be formed with N(2)O, not with O(2). O(2)-activated Co intermediates in faujasite (FAU) zeolites can selectively oxidize alpha-pinene and epoxidize styrene. In Co-FAU, Co(III) superoxo and peroxo complexes are suggested to be the active cores, whereas in Cu and Fe-ZSM-5, various monomeric and dimeric sites have been proposed, but no consensus has been obtained. Very recently, the active site in Cu-ZSM-5 was identified as a bent [Cu-O-Cu](2+) core (Proc. Natl. Acad. Sci. U.S.A. 2009, 106, 18908-18913). Overall, O(2) activation depends on the interplay of structural factors such as the type of zeolite and sizes of the channels and cages and chemical factors such as the Si/Al ratio and the nature, charge, and distribution of the charge-balancing cations. The presence of several different TMI sites hinders the direct study of the spectroscopic features of the active site. Spectroscopic techniques capable of selectively probing these sites, even if they only constitute a minor fraction of the total amount of TMI sites, are thus required. Fundamental knowledge of the geometric and electronic structures of the reactive active site can help in the design of novel selective oxidation catalysts.

Spectroscopic and computational studies of an end-on bound superoxo-Cu(II) complex: geometric and electronic factors that determine the ground state.

A variety of techniques including absorption, magnetic circular dichroism (MCD), variable-temperature, variable-field MCD (VTVH-MCD), and resonance Raman (rR) spectroscopies are combined with density functional theory (DFT) calculations to elucidate the electronic structure of the end-on (η(1)) bound superoxo-Cu(II) complex [TMG(3)trenCuO(2)](+) (where TMG(3)tren is 1,1,1-tris[2-[N(2)-(1,1,3,3-tetramethylguanidino)]ethyl]amine). The spectral features of [TMG(3)trenCuO(2)](+) are assigned, including the first definitive assignment of a superoxo intraligand transition in a metal-superoxo complex, and a detailed description of end-on superoxo-Cu(II) bonding is developed. The lack of overlap between the two magnetic orbitals of [TMG(3)trenCuO(2)](+) eliminates antiferromagnetic coupling between the copper(II) and the superoxide, while the significant superoxo π*(σ) character of the copper dz(2) orbital leads to its ferromagnetically coupled, triplet, ground state.

Molecular oxygen and sulfur reactivity of a cyclotriveratrylene derived trinuclear copper(I) complex.

Our continuing efforts into developing copper coordination chemistry relevant to dioxygen-processing copper proteins has led us to design and synthesize a cyclotriveratrylene (CTV)-based trinucleating ligand, CTV-TMPA, which employs tetradentate tris(2-pyridylmethyl)-amine chelates (TMPA) for their copper ion binding sites. Binding of three copper ions per CTV-TMPA unit was established by various chemical and spectroscopic methods such as UV-vis and resonance Raman (rR) spectroscopies. The following complexes were observed: A tricopper(I) complex [(CTV-TMPA)Cu(I)(3)](3+) (1), a CO adduct [(CTV-TMPA)Cu(I)(3)(CO)(3)](3+) (1-CO; nu(C=O) = 2094 cm(-1)), a triphenylphosphine adduct [(CTV-TMPA)Cu(I)(3)(PPh(3))(3)](3+) (1-PPh(3)), a tricopper(II) complex [(CTV-TMPA)Cu(II)(3)](3+) (1-Ox), and its tris-monochloride or tris-monobromide adducts. Also, introduction of dioxygen to the -80 degrees C solutions of 1 leads to O(2)-adducts, the first example of a synthetic copper complex which can stabilize a mononuclear Cu(II)-superoxo and dinuclear peroxo species simultaneously within one complex {[Cu] = 1.53 mM in THF: (mu-1,2-peroxo complex, lambda(max) = 543 (epsilon 9650) nm): nu(O-O) = 825 ((Delta(18)O(2)) = -47) cm(-1); nu(Cu-O) = 506 ((Delta(18)O(2)) = -26) cm(-1): (superoxo complex, lambda(max) = 427 (epsilon 3150) nm): nu(O-O) = 1129 ((Delta(18)O(2)) = -60) cm(-1); nu(Cu-O) = 463 ((Delta(18)O(2)) = -27) cm(-1)}. Elemental sulfur reacts reversibly with 1 leading to a (proposed) hexanuclear species [{(CTV-TMPA)Cu(II)(3)}(2)(mu-1,2-S(2)(2-))(3)](6+) (1-S) {lambda(max) = 544 (epsilon 7270) nm}, possessing one dicopper(II)-disulfide structural type: {THF solvent) nu(S-S) = 489 ((Delta(34)S) = -10) cm(-1); nu(Cu-S) = 307 ((Delta(34)S) = -5) cm(-1)}. Derivation of spectroscopic, structural, and chemical conclusions were aided by the study of a close mononuclear analogue with one pyridyl group of the TMPA parent possessing a 6-CH(2)OCH(3) substituent, this being part of the CTV-TMPA architecture.

Copper(I)/O2 chemistry with imidazole containing tripodal tetradentate ligands leading to mu-1,2-peroxo-dicopper(II) species.

Cuprous and cupric complexes with the new imidazolyl containing tripodal tetradentate ligands {L(MIm), (1H-imidazol-4-yl)-N,N-bis((pyridin-2-yl)methyl)methanamine, and L(EIm), 2-(1H-imidazol-4-yl)-N,N-bis((pyridin-2-yl)methyl)ethanamine}, have been investigated to probe differences in their chemistry, especially in copper(I)-dioxygen chemistry, compared to that already known for the pyridyl analogue TMPA, tris(2-pyridyl)methyl)amine. Infrared (IR) stretching frequencies obtained from carbon monoxide adducts of [(L(MIm))Cu(I)](+) (1a) and [(L(EIm))Cu(I)](+) (2a) show that the imidazolyl donor is stronger than its pyridyl analogue. Electrochemical data suggest differences in the binding constant of Cu(II) to L(EIm) compared to TMPA and L(MIm), reflecting geometric changes. Oxygenation of [(L(MIm))Cu(I)](+) (1a) in 2-methyltetrahydrofuran (MeTHF) solvent at -128 degrees C leads to an intensely purple colored species with a UV-vis spectrum characteristic of an end-on bound peroxodicopper(II) complex [{(L(MIm))Cu(II)}(2)(mu-1,2-O(2)(2-))](2+) (1b(P)) {lambda(max) = 528 nm}, very similar to the previously well characterized complex [{(TMPA)Cu(II)}(2)(mu-1,2-O(2)(2-))](2+) {lambda(max) = 520 nm (epsilon = 12 000 M(-1) cm(-1)), in MeTHF; resonance Raman (rR) spectroscopy: nu(O-O) = 832 (Delta((18)O(2)) = -44) cm(-1)}. In the low-temperature oxygenation of 2a, benchtop (-128 degrees C) and stopped-flow (-90 degrees C) experiments reveal the formation of an initial superoxo-Cu(II) species [(L(EIm))Cu(II)(O(2)(*-))](+) (2b(S)), lambda(max) = 431 nm in THF) . This converts to the low-temperature stable peroxo complex [{(L(EIm))Cu(II)}(2)(mu-1,2-O(2)(2-))](2+) (2b(P)) {rR spectroscopy: nu(O-O) = 822 (Delta((18)O(2)) = -46) cm(-1)}. Complex 2b(P) possess distinctly reduced Cu-O and O-O stretching frequencies and a red-shifted UV-vis feature {to lambda(max) = 535 nm (epsilon = 11 000 M(-1) cm(-1))} compared to the TMPA analogue due to a distortion from trigonal bipyramidal (TBP) to a square pyramidal ligand field. This distortion is supported by the structural characterization of related ligand-copper(II) complexes: A stable tetramer cluster complex [(mu(2)-L(EIm-))(4)(Cu(II))(4)](4+), obtained from thermal decomposition of 2b(P) (with formation of H(2)O(2)), also exhibits a distorted square pyramidal Cu(II) ion geometry as does the copper(II) complex [(L(EIm))Cu(II)(CH(3)CN)](2+) (2c), characterized by X-ray crystallography and solution electron paramagnetic resonance (EPR) spectroscopy.

Copper dioxygen (bio)inorganic chemistry.

Cu/O2 intermediates in biological, homogeneous, and heterogeneous catalysts exhibit unique spectral features that reflect novel geometric and electronic structures that make significant contributions to reactivity. This review considers how the respective intermediate electronic structures overcome the spin-forbidden nature of O2 binding, activate O2 for electrophilic aromatic attack and H-atom abstraction, catalyze the 4 e- reduction of O2 to H2O, and discusses the role of exchange coupling between Cu ions in determining reactivity.

Thioether S-ligation in a side-on micro-eta2:eta2-peroxodicopperii complex.

[(ANS)Cu(I)(CH(3)CN)](+) reacts with O(2) giving [{(ANS)Cu(II)}(2)(micro-eta(2):eta(2)-O(2)(2-))](2+), nu(O-O) = 731 cm(-1), shown to possess S-thioether ligation, based on comparisons with analogues having all N-ligands or a -S(Ph) group. The finding is a rare occurrence and new for side-on O(2)(2-) binding.

Copper dioxygen adducts: formation of bis(mu-oxo)dicopper(III) versus (mu-1,2)Peroxodicopper(II) complexes with small changes in one pyridyl-ligand substituent.

The preference for the formation of a particular Cu 2O 2 isomer coming from (ligand)-Cu (I)/O 2 reactivity can be regulated with the steric demands of a TMPA (tris(2-pyridylmethyl)amine) derived ligand possessing 6-pyridyl substituents on one of the three donor groups of the tripodal tetradentate ligand. When this substituent is an -XHR group (X = N or C) the traditional Cu (I)/O 2 adduct forms a (mu-1,2)peroxodicopper(II) species ( A). However, when the substituent is the slightly bulkier XR 2 moiety {aryl or NR 2 (R not equal H)}, a bis(mu-oxo)dicopper(III) structure ( C) is favored. The reactivity of one of the bis(mu-oxo)dicopper(III) species, [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) (6tbp = (6- (t)Bu-phenyl-2-pyridylmethyl)bis(2-pyridylmethyl)amine), was probed, and for the first time, exogenous toluene or ethylbenzene hydrocarbon oxygenation reactions were observed. Typical monooxygenase chemistry occurred: the benzaldehyde product includes an 18-O atom for toluene/ 7- (1) (8)O 2 reactivity, and a H-atom abstraction by 7-O 2 is apparent from study of its reactions with ArOH substrates, as well as the determination of k H/ k D approximately 7 in the toluene oxygenation (i.e., PhCH 3 vs PhCD 3 substrates). Proposed courses of reaction are presented, including the possible involvement of PhCH 2OO (*) and its subsequent reaction with copper(I) complex, the latter derived from dynamic solution behavior of 7-O 2 . External TMPA ligand exchange for copper in 7-O 2 and O-O bond (re)formation chemistry, along with the ability to protonate 7-O 2 and release of H 2O 2 indicate the presence of an equilibrium between [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) and a (mu-1,2)peroxodicopper(II) form.

O2 and N2O activation by Bi-, Tri-, and tetranuclear Cu clusters in biology.

Copper-cluster sites in biology exhibit unique spectroscopic features reflecting exchange coupling between oxidized Cu's and e (-) delocalization in mixed valent sites. These novel electronic structures play critical roles in O 2 binding and activation for electrophilic aromatic attack and H-atom abstraction, the 4e (-)/4H (+) reduction of O 2 to H 2O, and in the 2e (-)/2H (+) reduction of N 2O. These electronic structure/reactivity correlations are summarized below.

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry.

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.