Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics.

Lack of solution processability is the main bottleneck in research progression and commercialization of conducting polymers. The current strategy of employing a water-soluble dopant (such as PEDOT:PSS) is not feasible with organic solvents, thus limiting compatibility on hydrophobic surfaces, such as three-dimensional (3D) printable thermoplastics. In this article, we utilize a colloidal dispersion of PEDOT particles to overcome this limitation and formulate an organic paint demonstrating conformal coating on 3D-printed objects. We start with synthesizing PEDOT particles that possess a low electrical resistance (gap resistance of 4.2 ± 0.5 Ω/mm). A particle-based organic paint is formulated and applied via brush painting. Coated objects show a surface resistance of 1 kΩ/cm, comparable to an object printed by commercial conductive filaments. The coating enables the fabrication of pH and strain sensors. Highly conductive PEDOT particles also absorb light strongly, especially in the near-infrared (NIR) range due to the high concentration of charge carriers on the polymer's conjugated backbones (i.e., polarons and bipolarons). PEDOT converts light to heat efficiently, resulting in a superior photothermal activity that is demonstrated by the flash ignition of a particle-impregnated cotton ball. Consequently, painted 3D prints are highly effective in converting NIR light to heat, and a 5 s exposure to a NIR laser (808 nm, 0.8 mW/cm2) leads to a record high-temperature increase (194.5 °C) among PEDOT-based coatings.

Microtubular PEDOT-Coated Bricks for Atmospheric Water Harvesting.

Atmospheric water harvesting is a promising technology for alleviating global water scarcity. Current water sorption materials efficiently capture water vapor from ubiquitous air; however, they are difficult to scale up due to high costs, complex device engineering, and intensive energy consumption. Fired red brick, a low-cost masonry construction material, holds the potential for developing large-scale functional architectures. Here, we utilize fired red brick for atmospheric water harvesting by integrating a microtubular coating of the conducting polymer PEDOT within its inorganic microstructure. This microtubular polymer coating affords hygroscopicity and high surface area for water nucleation, enables capillary forces to promote water transport, and enhances the water harvesting efficiency. Our brick composite achieves a maximum water vapor uptake of ∼200 wt % versus polymer mass at 95% relative humidity, decreasing to ∼15 wt % at 40% relative humidity. Facile water release is demonstrated via thermal, electrical, and illuminative heating. This proof-of-concept study demonstrates the potential of masonry construction materials for large-scale atmospheric water harvesting.

Single PEDOT Catalyst Boosts CO2 Photoreduction Efficiency.

Atmospheric pollution demands the development of solar-driven photocatalytic technologies for the conversion of CO2 into a fuel; state-of-the-art cocatalyst systems demonstrate conversion efficiencies currently unattainable by a single catalyst. Here, we upend the status quo demonstrating that the nanofibrillar conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is a record-breaking single catalyst for the photoreduction of CO2 to CO. This high catalytic efficiency stems from a highly conductive nanofibrillar structure that significantly enhances surface area, CO2 adsorption and light absorption. Moreover, the polymer's band gap is optimized via chemical doping/dedoping treatments using hydrochloric acid, ammonia hydroxide, and hydrazine. The hydrazine-treated PEDOT catalyst exhibits 100% CO yield under a stable regime (>10 h) with a maximum rate of CO evolution (3000 µmol gcat -1 h-1) that is 2 orders of magnitude higher than the top performing single catalyst and surpassed only by three other cocatalyst systems. Nanofibrillar PEDOT provides a new direction for designing the next generation of high-efficiency photoreduction catalysts.