RESUMO
Self-trapped exciton (STE) luminescence, typically associated with structural deformation of excited states, has attracted significant attention in metal halide materials recently. However, the mechanism of multiexciton STE emissions in certain metal halide crystals remains largely unexplored. This study investigates dual luminescence emissions in HCOO- doped Cs3Cu2I5 single crystals using transient and steady-state spectroscopy. The dual emissions are attributed to intrinsic STE luminescence originating from the host lattice and extrinsic STE luminescence induced by external dopants, respectively, each of which can be triggered independently at distinct energy levels. Theoretical calculations reveal that multiexciton emission originates from structural distortion of the host and dopant STEs within the 0D lattice in their respective excited states. By meticulously tuning the excitation wavelength and selectively exciting different STEs, the dynamic alteration of color change in Cs3Cu2I5:HCOO- crystals is demonstrated. Ultimately, owing to an extraordinarily high photoluminescence quantum yield (99.01%) and a diminished degree of self-absorption in Cs3Cu2I5:HCOO- crystals, they exhibit remarkable X-ray scintillation characteristics with light yield being improved by 5.4 times as compared to that of pristine Cs3Cu2I5 crystals, opening up exciting avenues for achieving low-dose X-ray detection and imaging.
RESUMO
Lead-free organic-inorganic hybrid perovskites are one class of promising optoelectronic materials that have attracted much attention due to their outstanding stability and environmentally friendly nature. However, the intrinsic band gap far from the Shockley-Queisser limit and the inferior electrical properties largely limit their applicability. Here, a considerable band-gap narrowing from 2.43 to 1.64 eV with the compression rate up to 32.5% is achieved via high-pressure engineering in the lead-free hybrid perovskite MA3Sb2I9. Meanwhile, the electric transport process changes from the initial interaction of both ions and electrons to only the contribution of electrons upon compression. The alteration in electrical characteristics is ascribed to the vibration limitation of organic ions and the enhanced orbital overlap, resulting from the reduction of the Sb-I bond length through pressure-induced phase transitions. This work not only systematically investigates the correlation between the structural and optoelectronic properties of MA3Sb2I9 but also provides a potential pathway for optimizing electrical properties in lead-free hybrid perovskites.
RESUMO
The strained interface of core@shell nanocrystals (NCs) can effectively modulate the energy level alignment, thereby significantly affecting the optical properties. Herein, the unique photoluminescence (PL) response of doped Mn ions is introduced as a robust probe to detect the targeted pressure-strain relation of CdS@ZnS NCs. Results show that the core experiences actually less pressure than the applied external pressure, attributed to the pressure-induced optimized interface that reduces the compressive strain on core. The pressure difference between core and shell increases the conduction band and valence band offsets and further achieves the core@shell configuration transition from quasi type II to type I. Accordingly, the PL intensity of CdS@ZnS NCs slightly increases, along with a faster blue-shift rate of PL peak under low pressure. This study elucidates the interplay between external physical pressure and interfacial chemical stress for core@shell NCs, leading to precise construction of interface engineering for practical applications.
RESUMO
Piezochromic materials refer to a class of matters that alter their photoluminescence (PL) colors in response to the external stimuli, which exhibit promising smart applications in anti-counterfeiting, optoelectronic memory and pressure-sensing. However, so far, most reported piezochromic materials have been confined to organic materials or hybrid materials containing organic moieties with limited piezochromic range of less than 100â nm in visible region. Here, we achieved an intriguing piezochromism in all-inorganic zero-dimensional (0D) Cs3Cu2Cl5 nanocrystals (NCs) with a considerable piezochromic range of 232â nm because of their unique inorganic rigid structure. The PL energy shifted from the lowest-energy red fluorescence (1.85â eV) to the highest-energy blue fluorescence (2.83â eV), covering almost the entire visible wavelength range. Pressure-modulated self-trapped exciton emission between different energy levels of self-trapped states within Cs3Cu2Cl5 NCs was the main reason for this piezochromism property. Note that the quenched emission, which is over five times more intense than that in the initial state, is retained under ambient conditions upon decompression. This work provides a promising pressure indicating material, particularly used in pressure stability monitoring for equipment working at extreme environments.
RESUMO
Simultaneous enhancement of free excitons (FEs) emission and self-trapped excitons (STEs) emission remains greatly challenging because of the radiative pathway competition. Here, a significant fluorescence improvement, associated with the radiative recombination of both FEs and STEs is firstly achieved in an unconventional ACI-type hybrid perovskite, (ACA)(MA)PbI4 (ACA=acetamidinium) crystals with {PbI6} octahedron units, through hydrostatic pressure processing. Note that (ACA)(MA)PbI4 exhibits a 91.5-fold emission enhancement and considerable piezochromism from green to red in a mild pressure interval of 1 atm to 2.5 GPa. The substantial distortion of both individual halide octahedron and the Pb-I-Pb angles between two halide octahedra under high pressure indeed determines the pressure-tuning localized excitons behavior. Upon higher pressure, photocurrent enhancement is also observed, which is attributed to the promoted electronic connectivity in (ACA)(MA)PbI4. The anisotropic compaction reduces the distance between neighboring organic molecules and {PbI6} octahedra, leading to the enhancement of hydrogen bonding interactions. This work not only offers a deep understanding of the structure-optical relationships of ACI-type perovskites, but also presents insights into breaking the limits of luminescent efficiency by pressure-suppressed nonradiative recombination.
RESUMO
Copper(I)-based halides have recently attracted increasing attention as a substitute for lead halides, owing to their nontoxicity, abundance, unique structure, and optoelectric properties. However, exploring an effective strategy to further improve their optical activities and revealing structure-optical property relationships still remain a great concern. Here, by using high pressure technique, a remarkable enhancement of self-trapped exciton (STE) emission associated with the energy exchange between multiple self-trapped states in zero-dimensional lead-free halide Cs3 Cu2 I5 NCs is successfully achieved. Furthermore, high-pressure processing endows the piezochromism of Cs3 Cu2 I5 NCs by experiencing a white light and a strong purple light emission, which is able to be stabilized at near-ambient pressure. The distortion of [Cu2 I5 ] clusters composing of tetrahedral [CuI4 ] and trigonal planar [CuI3 ] and the decreased Cu-Cu distance between the adjacent Cu-I tetrahedron and triangle are responsible for the significant STEs emission enhancement under high pressure. The experiments combined with first-principles calculations not only shed light on the structure-optical property relationships of [Cu2 I5 ] clusters halide, but also provide guidance for improving emission intensity that is highly desirable in solid-state lighting applications.
RESUMO
Optical force probes that can release force-dependent and visualized signals with minimal changes in the polymer main chains under mechanical load are highly sought after but currently limited. In this study, we introduce a flex-activated mechanophore (FA) based on the Diels-Alder adduct of anthracene and dimethyl acetylenedicarboxylatea that exhibits turn-on mechanofluorescence. We demonstrate that when FA is incorporated into polymer networks or in its crystalline state, it can release fluorescent anthracenes through a retro-Diels-Alder mechanochemical reaction under compression or hydrostatic high pressure, respectively. The flex-activated mechanism of FA is successfully confirmed. Furthermore, we systematically modulate the force delivered to the mechanophore by varying the crosslinking density of the networks and the applied macroscopic pressures. This modulation leads to incremental increases in mechanophore activation, successive release of anthracenes, and quantitative enhancement of fluorescence intensity. The exceptional potential of FA as a sensitive force probe in different bulk states is highlighted, benefiting from its unique flex-activated mode with highly emissive fluorophore releasing. Overall, this report enriches our understanding of the structures and functions of flex-activated mechanophores and polymeric materials.
RESUMO
In this work, through the introduction of different lengths of alkoxy chains to the dinuclear cyclometalated platinum(II) complexes, the apparent color, solubility, luminescence properties, and self-assembly behaviors have been remarkably modulated. In the solid state, the luminescence properties have been found to arise from emission origins that switch between the 3MMLCT excited state in the red solids and the 3IL excited state in the yellow state, depending on the alkoxy chain lengths. The luminescence of the yellow solids is found to show obvious bathochromic shifts under mechanical grinding and decreased intensity under controllable hydrostatic pressure. However, the emission of the red solids exhibits both a bathochromic shift and reduced intensity due to the isotropic compression-induced shortening of the Pt···Pt and π-π distances. By combining the data obtained from X-ray diffraction (XRD), infrared (IR), and X-ray single crystal structure, a better understanding of the relationship between molecular aggregation and photophysical properties has been realized, suggesting that the length of the alkoxy chains plays an important role in governing the supramolecular assemblies.
RESUMO
Maximizing the regeneration of singlet excitons remains a considerable challenge in deep-blue emission systems to obtain low-cost, high-efficiency fluorescent materials. However, the formation of the long-lifetime triplet excitons generally dominates the radiative process, making it greatly difficult to harvest deep-blue emission with high color purity because of the depression of singlet excitons. Here, a very bright deep-blue emission in double perovskite Cs2Na0.4Ag0.6InCl6 alloyed with Bi doping (CNAICB) was successfully achieved by pressure-driven reverse intersystem crossing (RISC), an abnormal photophysical process of energy transfer from the excited triplet state back to the singlet. Therein, the inherently broad emission of CNAICB was associated with the self-trapped excitons (STEs) at excited triplet states, whereas the radiative recombination of STEs populated in excited singlet states was responsible for the observed deep-blue emission. Moreover, the deep-blue emission corresponds to Commission Internationale de L'Eclairage (CIE) coordinates (0.16, 0.06) at 5.01 GPa, which meets the requirement of Rec. 2020 display standards. Likewise, pressure was introduced as an efficient tool to rule out the possibility of the recombination of free excitons and clarify the long-standing conventional dispute over the origin of the low-wavelength emission of Cs2AgInCl6. Our study not only demonstrates that pressure can be a robust means to boost the deep-blue emission but also provides deep insights into the structure-property relationship of lead-free CNAICB double perovskites.
RESUMO
The pressure-induced emission (PIE) behavior of halide perovskites has attracted widespread attention and has potential application in pressure sensing. However, high-pressure reversibility largely inhibits practical applications. Here, we describe the emission enhancement and non-doping control of the color temperature in two-dimensional perovskite (C6 H5 CH2 CH2 NH3 )2 PbCl4 ((PEA)2 PbCl4 ) nanocrystals (NCs) through high-pressure processing. A remarkable 5 times PIE was achieved at a mild pressure of 0.4â GPa, which was highly associated with the enhanced radiative recombination of self-trapped excitons. Of particular importance is the retention of the 1.6 times emission of dense (PEA)2 PbCl4 NCs upon the complete release of pressure, accompanied by a color change from "warm" (4403â K) to "cold" white light with 14295â K. The irreversible pressure-induced structural amorphization, which facilitates the remaining local distortion of inorganic Pb-Cl octahedra with respect to the steric hindrance of organic PEA+ cations, should be greatly responsible for the quenched high-efficiency photoluminescence.
RESUMO
The rational modulation of the nontraditional intrinsic luminescence (NTIL) of nonconventional luminophores remains difficult, on account of the limited understanding on the structure-property relationships and emission mechanisms. Herein, the effective modulation of NTIL is demonstrated based on a group of nonaromatic anhydrides and imides. Mutual bridging of isolated subgroups effectively promotes intramolecular through-space conjugation (TSC), leading to red-shifted emission, enhanced efficiency, and prolonged persistent room-temperature phosphorescence (p-RTP). The substitution of heteroatoms from oxygen to nitrogen drastically changes the TSC and enhances intermolecular interactions, resulting in enhanced emission efficiency. In addition, upon freezing, compression, or embedding into polymer matrices, the emission intensity and color remain well regulated. These results shed new light on the rational modulation of the NTIL and p-RTP of nonconventional luminophores.
RESUMO
Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co-doped carbon dots (F,N-doped CDs) is presented. At 1.0â atm, the fluorescence intensity of F,N-doped CDs increases with UV light irradiation (5â s-30â min), accompanied with a blue-shift of the fluorescence emission from 586â nm to 550â nm. F,N-doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1â GPa). F,N-doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0â atm to 9.98â GPa), showing a pressure-triggered aggregation-induced emission in the range 1.0â atm-0.65â GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high-pressure conditions and enhances their anti-photobleaching.
RESUMO
Low-dimensional halide perovskites easily suffer from the structural distortion related to significant quantum confinement effects. Organic tin bromide perovskite C4N2H14SnBr4 is a unique one-dimensional (1D) structure in which the edge sharing octahedral tin bromide chains [SnBr42-]∞ are embraced by the organic cations C4N2H142+ to form the bulk assembly of core-shell quantum wires. Some unusual phenomena under high pressure are accordingly expected. Here, an intriguing pressure-induced emission (PIE) in C4N2H14SnBr4 was successfully achieved by means of a diamond anvil cell. The observed PIE is greatly associated with the large distortion of [SnBr6]4- octahedral motifs resulting from a structural phase transition, which can be corroborated by in situ high-pressure photoluminescence, absorption, and angle-dispersive X-ray diffraction spectra. The distorted [SnBr6]4- octahedra would accordingly facilitate the radiative recombination of self-trapped excitons (STEs) by lifting the activation energy of detrapping of self-trapped states. First-principles calculations indicate that the enhanced transition dipole moment and the increased binding energy of STEs are highly responsible for the remarkable PIE. This work will improve the potential applications in the fields of pressure sensors, trademark security, and information storage.
RESUMO
Pressure quenching of optical emission largely limits the potential application of many materials in optical pressure-sensing devices, since emission intensity is crucially connected to performance. Boosting visible-light emission at high pressure is, therefore, an important goal. Here, we demonstrate that the emission of CdSe nanocrystals (NCs) can be enhanced by more than an order of magnitude by compression. The brightest emission can be achieved at pressures corresponding to the phase transitions in different sized CdSe NCs. Very bright blue emission can be obtained by exploiting the increase in band gap with increasing pressure. First-principles calculations indicate that the interaction between the capping oleic acid (OA) layer and the CdSe core is strengthened with increased Hirshfeld charge at high pressure. The effective surface reconstruction associated with the removal of surface-related trap states is highly responsible for the pressure-induced emission enhancement of these CdSe NCs. These findings pave the way for designing a stress nanogauge with easy optical readout and provide a route for tuning bright-fluorescence imaging in response to an externally applied pressure.
RESUMO
Mechanofluorochromic materials, which change their photoluminescence (PL) colors in responding to mechanical stimuli, can be used as mechanosensors, security papers, and photoelectronic devices. However, traditional mechanofluorochromic materials can only be adjusted to a monotone direction upon the external stimuli. Controllable pressure-triggered blue- and red-shifted PL is reported for C-dots. The origin of mechanofluorochromism (MFC) in C-dots is interpreted based on structure-property relationships. The carbonyl group and the π-conjugated system play key roles in the PL change of C-dots under high pressure. As the pressure increases, the enhanced π-π stacking of the π-conjugated system causes the red-shift of PL, while the conversion of carbonyl groups eventually induces a blue-shift. Together with their low toxicity, good hydrophilicity, and small size, the tunable MFC property would boost various potential applications of C-dots.
RESUMO
Metal halide perovskites (MHPs) are gaining increasing interest because of their extraordinary performance in optoelectronic devices and solar cells. However, developing an effective strategy for achieving the band-gap engineering of MHPs that will satisfy the practical applications remains a great challenge. In this study, high pressure is introduced to tailor the optical and structural properties of MHP-based cesium lead bromide nanocrystals (CsPbBr3 NCs), which exhibit excellent thermodynamic stability. Both the pressure-dependent steady-state photoluminescence and absorption spectra experience a stark discontinuity at â¼1.2 GPa, where an isostructural phase transformation regarding the Pbnm space group occurs. The physical origin points to the repulsive force impact due to the overlap between the valence electron charge clouds of neighboring layers. Simultaneous band-gap narrowing and carrier-lifetime prolongation of CsPbBr3 trihalide perovskite NCs were also achieved as expected, which facilitates the broader solar spectrum absorption for photovoltaic applications. Note that the values of the phase change interval and band-gap red-shift of CsPbBr3 nanowires are between those for CsPbBr3 nanocubes and the corresponding bulk counterparts, which results from the unique geometrical morphology effect. First-principles calculations unravel that the band-gap engineering is governed by orbital interactions within the inorganic Pb-Br frame through structural modification. Changes of band structures are attributed to the synergistic effect of pressure-induced modulations of the Br-Pb bond length and Pb-Br-Pb bond angle for the PbBr6 octahedral framework. Furthermore, the significant distortion of the lead-bromide octahedron to accommodate the Jahn-Teller effect at much higher pressure would eventually lead to a direct to indirect band-gap electronic transition. This study enables high pressure as a robust tool to control the structure and band gap of CsPbBr3 NCs, thus providing insight into the microscopic physiochemical mechanism of these compressed MHP nanosystems.
RESUMO
Piezochromic materials, which show color changes resulting from mechanical grinding or external pressure, can be used as mechanosensors, indicators of mechano-history, security papers, optoelectronic devices, and data storage systems. A class of piezochromic materials with unprecedented two-photon absorptive and yellow emissive carbon dots (CDs) was developed for the first time. Applied pressure from 0-22.84â GPa caused a noticeable color change in the luminescence of yellow emissive CDs, shifting from yellow (557â nm) to blue-green (491â nm). Moreover, first-principles calculations support transformation of the sp2 domains into sp3 -hybridized domains under high pressure. The structured CDs generated were captured by quenching the high-pressure phase to ambient conditions, thus greatly increasing the choice of materials available for a variety of applications.
RESUMO
Synthesis of nanomaterials with target crystal structures, especially those new structures that cannot be crystallized in their bulk counterparts, is of considerable interest owing to their strongly structure-dependent properties. Here, we have successfully synthesized and identified new-phase nanocrystals (NCs) associated with orthorhombic MnP-type (B31) MnS by utilizing an effective high-pressure technique. It is particularly worth noting that the generated new structured MnS NCs were captured as expected by quenching the high-pressure phase to the ambient conditions at room temperature. Likewise, the commercially available bulk rocksalt (RS) MnS material underwent unambiguously a reversible phase transition when the pressure was released completely. First-principles calculations further supported that the B31-MnS was more energetically preferable than the RS one under high pressure, which can be plausibly interpreted by the structural buckling with respect to zigzagged arrangements within B31 unit cell. Our findings represent a significant step forward in a deeper understanding of the high-pressure phase diagram of MnS and even provide a promising strategy to prepare desired nanomaterials with new structures that do not exist in their bulk counterparts, thus greatly increasing the choice of materials for a variety of applications.
RESUMO
There is an urgent need for the development in the field of the magnetism of topological insulators, owing to the necessity for the realization of the quantum anomalous Hall effect. Herein, we discuss experimentally fabricated nanostructured hierarchical architectures of the topological insulator Bi2Te3 without the introduction of any exotic magnetic dopants, in which intriguing room-temperature ferromagnetism was identified. First-principles calculations demonstrated that the intrinsic point defect with respect to the antisite Te site is responsible for the creation of a magnetic moment. Such a mechanism, which is different from that of a vacancy defect, provides new insights into the origins of magnetism. Our findings may pave the way for developing future Bi2Te3-based dissipationless spintronics and fault-tolerant quantum computation.