The effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration.

The saline wastewater produced in industrial activities and seawater use would flow into wastewater treatment plants and affect the characteristic of extracellular polymeric substance (EPS) of activated sludge, which could potentially impact the removal of antibiotics via adsorption. Nonetheless, the effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration and the underlying mechanism remain largely unknown. In this study, the effect of salinity on the adsorption removal of a typical antibiotic, i.e., trimethoprim (TMP) at trace concentration (25.0 µg/L) was evaluated. The results showed the content of EPS was decreased significantly from 56.36 to 21.70 mg/g VSS when the salinity was increased from 0 to 10 g/L. Protein fractions occupied the predominant component of EPS, whose concentration was decreased from 38.17 to 12.83 mg/g VSS. The equilibrium adsorption capacity of activated sludge for TMP was decreased by 49.70% (from 4.97 to 2.50 µg/g VSS). The fluorescence quenching results indicated the fluorescence intensity of tryptophan-like substances was decreased by 30% and the adsorption sites of EPS were decreased from 0.51 to 0.21 when the salinity was increased. The infrared spectrum and XPS results showed that the nitrogen-containing groups from protein were decreased significantly. The circular dichroic analysis showed α helix structure of protein in EPS was decreased with the increase of salinity, which was responsible for the decrease of adsorption capacity for TMP.

The contradictory roles of tightly bound and loosely bound extracellular polymeric substances of activated sludge in trimethoprim adsorption process.

Extracellular polymeric substances (EPS) of activated sludge are a mixture of high molecular weight polymers secreted by microorganisms, which have the double structure of tightly-bound EPS (TB-EPS) in inner layer and loosely-bound EPS (LB-EPS) in outer layer. The characteristic of LB- and TB-EPS were different, which would affect their adsorption of antibiotics. However, the adsorption process of antibiotics on LB- and TB-EPS was still unclear yet. Therefore, in this work, the roles of LB-EPS and TB-EPS in adsorption of a typical antibiotic-trimethoprim (TMP) at environmentally relevant concentration (25.0 µg/L) were investigated. The results showed the content of TB-EPS was higher than that of LB-EPS, which was 17.08 and 10.36 mg/g VSS, respectively. The adsorption capacity of raw, LB-EPS extracted and both LB- and TB-EPS extracted activated sludges for TMP were 5.31, 4.65 and 9.51 µg/g VSS, respectively, which indicated LB-EPS had positive effect on TMP removal, while TB-EPS had negative effect. The adsorption process can be well described by a pseudo-second-order kinetic model (R2 > 0.980). The ratio of different functional groups was calculated and the CO and C-O bond might be responsible for the adsorption capacity difference between LB- and TB-EPS. The fluorescence quenching results indicated that tryptophan protein-like substances in LB-EPS provided more binding sites (n = 0.36) than that of tryptophan amino acid in TB-EPS (n = 0.1). Furthermore, the extend DLVO results also demonstrated that LB-EPS promoted the adsorption of TMP, while TB-EPS inhibited the process. We hope the results of this study were helpful for understanding the fate of antibiotics in wastewater treatment systems.

Community structure and co-occurrence network analysis of bacteria and fungi in wheat fields vs fruit orchards.

Soil microorganisms play a vital role in biogeochemical processes and nutrient turnover in agricultural ecosystems. However, the information on how the structure and co-occurrence patterns of microbial communities response to the change of planting methods is still limited. In this study, a total of 34 soil samples were collected from 17 different fields of 2 planting types (wheat and orchards) along the Taige Canal in Yangtze River Delta. The structure of bacterial and fungal communities in soil were determined by 16S rRNA gene and ITS gene, respectively. The dominated bacteria were Proteobacteria, Acidobacteriota, Actinobacteriota, Chloroflexi, Bacteroidota, and Firmicutes. The relative abundances of Actinobacteriota and Firmicutes were higher in the orchards, while Chloroflexi and Nitrospirota were more abundant in wheat fields. Ascomycota, Mortierellomycota, and Basidiomycota were the predominant fungus in both soil types. Diversity of bacterial and fungal communities were greater in the wheat fields than in orchards. Statistical analyses showed that pH was the main factor shaping the community structure, and parameters of water content (WC), total organic carbon (TOC) and total nitrogen (TN) had great influences on community structure. Moreover, high co-occurrence patterns of bacterial and fungal were confirmed in both wheat fields and orchards. Network analyses showed that both wheat fields and orchards occurred modular structure, including nodes of Acidobacteriota, Chloroflexi, Gemmatimonadota, Nitrospirota and Ascomycota. In summary, our work showed the co-occurrence network and the convergence/divergence of microbial community structure in wheat fields and orchards, giving a comprehensive understanding of the microbe-microbe interaction during planting methods' changes.

Insight into the role of different extracellular polymeric substances components on trimethoprim adsorption by activated sludge.

Adsorption is the primary mechanism of antibiotic removal in wastewater treatment plants, wherein the extracellular polymeric substances (EPS) of the activated sludge play an important role. Due to their complex characteristics, the effect of EPS components on antibiotic adsorption is unknown. Therefore, in this study, the role of main components of EPS in antibiotic adsorption was explored using enzymatic treatment. The results revealed that proteinase K and α-amylase can efficiently hydrolyse the proteins and polysaccharides of EPS. The protein content of EPS reduced from 31.25 mg/g VSS to 21.53, 18.75, and 10.76 mg/g VSS, after treatment with proteinase K, α-amylase and their combination, respectively; the polysaccharides content also observed a similar decrease from 15.20 mg/g VSS to 8.22, 7.83, and 6.03 mg/g VSS, respectively. The humic substance in EPS was stable during enzymatic treatment. The equilibrium adsorption capacity of activated sludge treated by enzyme for trimethoprim (TMP)- a typical antibiotic, was significantly increased from 2.19 µg/g VSS to 4.68, 5.34, and 8.36 µg/g VSS after treatment with proteinase K, α-amylase and their mixture. The adsorption process was adequately described by pseudo-second-order kinetic model. A multivariable linear regression model was subsequently used to quantify the adsorption capacity of activated sludge for TMP considering the concentration of EPS components. The modelling and validated results showed that the model could satisfactorily predict the TMP adsorption capacity. The results of this study can provide new insights into the role of EPS on antibiotic transformation in biological wastewater treatment systems.

Clinical significance of LOXL4 expression and features of LOXL4-associated protein-protein interaction network in esophageal squamous cell carcinoma.

Lysyl oxidase-like 4 (LOXL4), a member of the LOX family proteins, catalyzes oxidative deamination of lysine residues in collagen and elastin, which are responsible for maintaining extracellular matrix homeostasis. In this study, the mRNA expression of LOXL4 in seven esophageal squamous cell carcinoma (ESCC) cell lines and 15 ESCC pairs of clinical samples were examined. Furthermore, LOXL4 protein levels in the ESCC cell lines were determined using western blotting. With the use of immunofluorescence, LOXL4 was observed to be localized primarily in the cytoplasm, but was also present in the nucleus. In addition, the results indicated that the upregulated expression of LOXL4 was associated with poor survival in patients with ESCC even following curative resection (P = 0.010). Similar Kaplan-Meier estimator curves for proteins that interact with LOXL4, SUV39H1 (P = 0.014) and COL2A1 (P = 0.011), were plotted. The analyses based on the protein-protein interaction network depicted the expression of LOXL4 and its associated proteins as well as their functions, suggesting that LOXL4 and its associated proteins may serve a significant role in the development and progression of ESCC. In conclusion, the results of the present study suggest that LOXL4 is a potential biomarker for patients with ESCC, as well as SUV39H1 and COL2A1, and high expression levels of these genes are associated with poor prognosis in patients with ESCC.

The protein-protein interaction network and clinical significance of heat-shock proteins in esophageal squamous cell carcinoma.

Heat-shock proteins (HSPs), one of the evolutionarily conserved protein families, are widely found in various organisms, and play important physiological functions. Nevertheless, HSPs have not been systematically analyzed in esophageal squamous cell carcinoma (ESCC). In this study, we applied the protein-protein interaction (PPI) network methodology to explore the characteristics of HSPs, and integrate their expression in ESCC. First, differentially expressed HSPs in ESCC were identified from our previous RNA-seq data. By constructing a specific PPI network, we found differentially expressed HSPs interacted with hundreds of neighboring proteins. Subcellular localization analyses demonstrated that HSPs and their interacting proteins distributed in multiple layers, from membrane to nucleus. Functional enrichment annotation analyses revealed known and potential functions for HSPs. KEGG pathway analyses identified four significant enrichment pathways. Moreover, three HSPs (DNAJC5B, HSPA1B, and HSPH1) could serve as promising targets for prognostic prediction in ESCC, suggesting these HSPs might play a significant role in the development of ESCC. These multiple bioinformatics analyses have provided a comprehensive view of the roles of heat-shock proteins in esophageal squamous cell carcinoma.

The enhanced effect of activated sludge attached to the roots of Pistia stratiotes on nutrient removal for secondary effluent.

Aquatic plants are widely used for treating wastewater treatment plant secondary effluent. During this process, some residual activated sludge in the secondary effluent is intercepted and attaches to the plant roots. However, the effect of the attached activated sludge on nutrient removal in secondary effluent has up to now been unknown. Aiming at this problem, this investigation was conducted to compare the nutrient removal rates in secondary effluent by washed Pistia stratiotes (washed batch) and Pistia stratiotes with activated sludge attached to the roots (study batch). Extracellular polymeric substances (EPS) from the activated sludge attached to the roots were extracted and characterized by three-dimensional excitation emission matrix (3D-EEM) fluorescence spectroscopy. The results showed that the nutrient removal rates in the study batch were better than that in the washed batch. The 3D-EEM results showed that the protein content of EPS increased during the experiment, indicating the growth of microorganisms in the attached activated sludge. Our work demonstrated the enhanced effect of activated sludge attached to the roots of Pistia stratiotes on the removal of pollutants in secondary effluent, which is useful to guide the practical engineering of secondary effluent treatment.

nosZ II/nosZ I ratio regulates the N2O reduction rates in the eutrophic lake sediments.

Nitrous oxide (N2O) is a more potent greenhouse gas with an atmospheric lifetime of 121 years, contributing significantly to climate change and stratospheric ozone depletion. Lakes are hotspots for N2O release due to the imbalance between N2O sources and sinks. N2O-reducing bacteria are the only biological means to mitigate N2O emission, yet their roles in lakes are not well studied. This study investigated the potential for N2O reduction, keystones of typical and atypical N2O-reducing bacterial communities, and their correlations with environmental factors in the sediments of Lake Taihu through microcosm experiments, high-throughput sequencing of the nosZ gene, and statistical modeling. The results showed that potential N2O reduction rates in sediments ranged from 13.71 to 76.95 µg N2O g-1 d-1, with lower rates in December compared to March and July. Correlation analysis indicated that the nosZ II/nosZ I ratio and the trophic lake index (TLI) were the primary factors influencing N2O reduction rates and N2O-reducing bacterial community structures. The genera Pseudogulbenkiania and Ardenticatena were identified as the most abundant typical and atypical N2O-reducing bacteria, respectively, and were also recognized as the keystone taxa. Quantitative real-time PCR (qPCR) results revealed that nosZ II was more abundant than nosZ I in the sediments. Partial least squares path modeling (PLS-PM) further demonstrated that atypical N2O-reducing bacteria had significant positive effects on N2O reduction process in the sediments (p < 0.05). Overall, this study highlights the crucial ecological roles of atypical N2O-reducing bacteria in the sediments of the eutrophic lake of Taihu, underscoring their potential in mitigating N2O emissions.

The cumulative impact of temperature and nitrogen availability on the potential nitrogen fixation and extracellular polymeric substances secretion by Dolichospermum.

Nitrogen-fixing cyanobacteria not only cause severe blooms but also play an important role in the nitrogen input processes of lakes. The production of extracellular polymeric substances (EPS) and the ability to fix nitrogen from the atmosphere provide nitrogen-fixing cyanobacteria with a competitive advantage over other organisms. Temperature and nitrogen availability are key environmental factors in regulating the growth of cyanobacteria. In this study, Dolichospermum (formerly known as Anabaena) was cultivated at three different temperatures (10 °C, 20 °C, and 30 °C) to examine the impact of temperature and nitrogen availability on nitrogen fixation capacity and the release of EPS. Initially, confocal laser scanning microscopy (CLSM) and the quantification of heterocysts at different temperatures revealed that lower temperatures (10 °C) hindered the differentiation of heterocysts under nitrogen-deprived conditions. Additionally, while heterocysts inhibited the photosynthetic activity of Dolichospermum, the secretion of EPS was notably affected by nitrogen limitation, particularly at 30 °C. Finally, real-time quantitative polymerase chain reaction (qPCR) was used to measure the expression of nitrogen-utilizing genes (ntcA and nifH) and EPS synthesis-related genes (wzb and wzc). The results indicated that under nitrogen-deprived conditions, the expression of each gene was upregulated, and there was a significant correlation between the upregulation of nitrogen-utilizing and EPS synthesis genes (P < 0.05). Our findings suggested that Dolichospermum responded to temperature variation by affecting the formation of heterocysts, impacting its potential nitrogen fixation capacity. Furthermore, the quantity of EPS released was more influenced by nitrogen availability than temperature. This research enhances our comprehension of interconnections between nitrogen deprivation and EPS production under the different temperatures.

How does Microcystis aeruginosa respond to elevated temperature?

Cyanobacteria and their toxins widely exist in freshwater ecosystems. Microcystis aeruginosa is among dominant bloom-forming cyanobacteria. Water temperature is a key factor influencing the life cycle of M. aeruginosa. We simulated elevated temperature (4-35 °C) experiment and cultured M. aeruginosa during the overwintering, recruitment and rapid growth phases. The results showed that M. aeruginosa recovered growth after overwintering at 4-8 °C and recruited at 16 °C. The total extracellular polymeric substance (TEPS) concentration increased rapidly at 15 °C. The actual quantum yield of photosystem II (Fv'/Fm') peaked at 20 °C during the rapid growth phase, and the optimum temperature of M. aeruginosa growth was 20-25 °C. Additionally, TEPS and microcystins (MCs) secretion peaked at 20-25 °C. The cell density accumulated rapidly from 26 °C to 35 °C. Furthermore, enzymes of RuBisCO and FBA related to photosynthetic activity were confirmed to contribute to the metabolism, as well as mcyB gene was affected by elevated temperature. Our results provide insights of the physiological effects and metabolic activity during annual cycle of M. aeruginosa. And it is predicted that global warming may promote the earlier recruitment of M. aeruginosa, extend the optimum growth period, enhance the toxicity, and finally intensify M. aeruginosa blooms.

The erythromycin sorption removal at environmentally relevant concentration based on molecular imprinted polymer: Performance and mechanism.

The antibiotic pollution emerged in different environments has raised a great concern. Adsorption is an effective method to solve the problem. However, conventional adsorbents are not always efficient for antibiotic removal with interferences. Therefore, in this study, molecularly imprinted polymer (EMIP) with selective adsorption ability was prepared to remove a typical antibiotic-erythromycin (ERY) at environmentally relevant concentration. The specific surface area of EMIP was 265.62 m2/g with large pore volume, small pore size and hydrophobic surface. The adsorption capacity of EMIP was increased from 211.08 to 4015.51 µg/g when the concentration of ERY was increased from 5.00 to 100.00 µg/L. The isothermal adsorption process was fitted well with the Langmuir model. The adsorption kinetic could be well described by the pseudo-second-order model. With co-existing of interferences, the imprinting factor for ERY was 2.57, which demonstrated EMIP had good adsorption selectivity. After five consecutive adsorption-desorption experiments, the adsorption capacity of EMIP was still over 80%. The results of molecular dynamic simulation showed the adsorption energy between ERY and EMIP was high, which was favorable for ERY adsorption removal. Hopefully, the results of this study could provide new insights for trace antibiotic removal by molecular imprinting polymers in different aqueous environments.

Formation of distinct soluble microbial products by activated sludge: kinetic analysis and quantitative determination.

Soluble microbial products (SMP) released by microorganisms in bioreactors are classified into two distinct groups according to their different chemical and degradation kinetics: utilization-associated products (UAP) and biomass-associated products (BAP). SMP are responsible for effluent chemical oxygen demand or for membrane fouling of membrane bioreactor. Here an effective and convenient approach, other than the complicated chemical methods or complex models, is developed to quantify the formation of UAP and BAP together with their kinetics in activated sludge process. In this approach, an integrated substrate utilization equation is developed and used to determine UAP and their production kinetics. On the basis of total SMP measurements, BAP formation is determined with an integrated BAP formation equation. The fraction of substrate electrons diverted to UAP, and the content of BAP derived from biomass can then be calculated. Dynamic quantification data are obtained for UAP and BAP separately and conveniently. The obtained kinetic parameters are found to be reasonable as they are generally bounded and comparable to the literature values. The validity of this approach is confirmed by independent SMP production tests in six different activated sludge systems, which demonstrates its applicability in a wide range of engineered system regarding SMP production. This work provides a widely applied approach to determine the formation of UAP and BAP conveniently, which may offer engineers with basis to optimize bioreactor operation to avoid a high effluent soluble organics from SMP or SMP-based membrane fouling in membrane bioreactors.

Comparing the influence of humic/fulvic acid and tannic acid on Cr(VI) adsorption onto polystyrene microplastics: Evidence for the formation of Cr(OH)3 colloids.

Microplastics (MPs) can act as vectors for various contaminants in the aquatic environment. Although some research has investigated the adsorption characteristics and influencing factors of metals/organic molecules on MPs, the effects of dissolved organic matter (DOM) (which are ubiquitous active species in ecosystems) on metal oxyanions such as Cr(VI) capture by MPs are largely unknown. This study explored the adsorption behaviors and mechanisms of Cr(VI) oxyanions onto polystyrene (PS) MPs using batch adsorption experiments and multiple spectroscopic methods. The effects of representative DOM components (i.e., humic acid (HA), fulvic acid (FA) and tannic acid (TA)) on Cr(VI) capture by PS were particularly studied. Results revealed a significantly enhanced adsorption of Cr(VI) on PS in the presence of TA. The Cr(VI) adsorption capacity was increased from 2876 µg g-1 to 4259 µg g-1 and 5135 µg g-1 when the TA concentrations raised from 0 to 10 and 20 mg L-1, respectively. Combined microscopic and spectroscopic investigations revealed that Cr(VI) was reduced to Cr(III) by TA and formed stable Cr(OH)3 colloids on PS surfaces. Contrarily, HA and FA inhibited Cr(VI) adsorption onto PS, especially at pH > 2.0 and higher DOM concentrations, due to site competition and electrostatic repulsion. Increase in pH was found to reduce zeta potentials of MPs, resulting in inhibited Cr(VI) adsorption. The adsorbed Cr(VI) declined with increasing ionic strength, implying that outer-sphere surface complexation affected the adsorption process in the presence of DOM. These new findings improved our fundamental understanding of the fate of Cr(VI) and MPs in DOM-rich environmental matrices.

Evaluation on factors influencing the heterotrophic growth on the soluble microbial products of autotrophs.

In this work, the heterotrophic growth on the microbial products of autotrophs and the effecting factors were evaluated with both experimental and modeling approaches. Fluorescence in situ hybridization (FISH) analysis illustrated that ammonia oxidizers (AOB), nitrite oxidizers (NOB), and heterotrophs accounted for about 65%, 20%, and 15% of the total bacteria, respectively. The mathematical evaluation of experimental data reported in literature indicated that heterotrophic growth in nitrifying biofilm (30-50%) and granules (30%) was significantly higher than that of nitrifying sludge (15%). It was found that low influent ammonium resulted in a lower availability of soluble microbial products (SMP) and a slower heterotrophic growth, but high ammonium (>150 mg N L(-1)) feeding would lead to purely AOB dominated sludge with high biomass-associated products contained effluent, although the absolute heterotrophic growth increased. Meanwhile, the total active biomass concentration increased gradually with the increasing solids retention time, whereas the factions of active AOB, NOB, and heterotrophs varied a lot at different solids retention times. This work could be useful for better understanding of the autotrophic wastewater treatment systems.

Heterotrophs grown on the soluble microbial products (SMP) released by autotrophs are responsible for the nitrogen loss in nitrifying granular sludge.

In this work, nitrogen loss in the nitrite oxidation step of the nitrification process in an aerobic-granule-based reactor was characterized with both experimental and modeling approaches. Experimental results showed that soluble microbial products (SMP) were released from the nitrite-oxidizing granules and were utilized as a carbon source by the heterotrophs for denitrification. This was verified by the fluorescence in situ hybridization (FISH) analysis. Microelectrode tests showed that oxygen diffusion limitation did result in an anoxic micro-zone in the granules and allowed sequential utilization of nitrate as an electron acceptor for heterotrophic denitrification with SMP as a carbon source. To further elucidate the nitrogen loss mechanisms, a mathematic model was formulated to describe the growth of nitrite oxidizers, the formation and consumption of SMP, the anoxic heterotrophic growth on SMP and nitrate, as well as the oxygen transfer and the substrate diffusion in the granules. The results clearly indicate that the heterotrophs grown on the SMP released by the autotrophs are responsible for the nitrogen loss in the nitrifying granules, and give us a better understanding of the aerobic granules for nitrogen removal. Biotechnol. Bioeng. 2011;108: 2844-2852. © 2011 Wiley Periodicals, Inc.

Exploring the feasibility of nitrous oxide reduction and polyhydroxyalkanoates production simultaneously by mixed microbial cultures.

Nitrous oxide (N2O), as a powerful greenhouse gas, has drawn increasing attention in recent years and different strategies for N2O reduction were explored. In this study, a novel strategy for valuable polyhydroxyalkanoates (PHA) production coupling with N2O reduction by mixed microbial cultures (MMC) using different substrates was evaluated. Results revealed that N2O was an effective electron acceptor for PHA production. The highest PHA yield (0.35 Cmmol PHA/Cmmol S) and PHA synthesis rate (227.47 mg PHA/L/h) were obtained with acetic acid as substrate. Low temperature (15℃) and pH of 8.0 were beneficial for PHA accumulation. Results of the thermogravimetric analysis showed that PHA produced with N2O as electron acceptor has better thermal stability (melting temperature of 99.4℃ and loss 5% weight temperature of 211.4℃). Our work opens up new avenues for simultaneously N2O reduction and valuable bioplastic production, which is conducive to resource recovery and climate protection.

Comparing the effects of humic acid and oxalic acid on Pb(II) immobilization by a green synthesized nanocrystalline hydroxyapatite.

Dissolved organic matter (DOM) is one of the most significant parameters to affect the remediation efficiency of Pb(II) by apatites. Numerous studies chose humic substances as a surrogate of DOM to investigate its influence on Pb(II) immobilization. However, the effect of low-molecular-weight organic acids such as oxalic acid (OA), which is ubiquitous in the environment and a primary component of DOM, in immobilizing Pb(II) was still not fully understood. Herein, humic acid (HA) and OA were examined to distinguish their influence on Pb(II) immobilization by a green synthesized nanocrystalline hydroxyapatite (nHAP). Various parameters were considered to evaluate the removal performance of nHAP towards Pb(II) as affected by HA/OA. Results indicated that Pb(II) immobilization was significantly promoted in the coexistence of OA owing to the precipitation of hydroxypyromorphite (HPY) as well as PbC2O4, but was independent on the addition sequence and slightly hindered by HA, disclosing that Pb(II) preferred to bind directly with nHAP instead of via HA. Characterization of the Pb(II) loaded solids by multiple technologies revealed that HPY was the predominant precipitate both in the absence and presence of HA, while the formation of PbC2O4 was preferred over that of HPY in the existence of OA. X-ray photoelectron spectroscopy indicated that PbC2O4 was the prevalent solid phase with the ratio of 62.97% after Pb(II) immobilization by nHAP in the presence of OA. These findings implied that the transformation efficiency of Pb(II) to HPY by apatites can be overestimated in the presence of OA due to the precipitation of PbC2O4.

The inhibitory effect of in situ extracellular polymeric substances on trimethoprim adsorption by activated sludge.

The extracellular polymeric substances (EPS) of activated sludge are a mixture of high molecular weight polymers secreted by microorganisms, which are mainly composed of proteins, polysaccharides and humic substances. It is widely accepted that EPS have a good adsorption ability for pollutants with different functional groups. However, recent studies showed the EPS had an inhibitory effect on pollutant sorption, which is contradictory to previous viewpoint. Therefore, in this study, three types of activated sludge with different EPS contents and compositions were used to investigate the role of EPS in an antibiotic-trimethoprim (TMP) sorption process at environmentally relevant concentration. The in situ experiments results showed the adsorption capacity of activated sludge for TMP were increased from 2.98, 5.37 and 28.33 µg/g VSS to 7.87, 12.93 and 150.24 µg/g VSS in nitrifying activated sludge, wastewater treatment plant activated sludge and anaerobic ammonia-oxidized activated sludge, respectively after EPS extracted. The adsorption process can be well described by the pseudo-second-order kinetic model. Results of zeta potential, contact angles and infrared spectrum showed TMP replacing proteins embedded into the cell membrane enhancing the TMP adsorption capacity of activated sludge after EPS extraction. Our results demonstrated that less proteins in EPS of activated sludge is more beneficial for TMP adsorption removal.

Microbial and physicochemical characteristics of compact anaerobic ammonium-oxidizing granules in an upflow anaerobic sludge blanket reactor.

Anaerobic ammonium oxidation (anammox) is a promising new process to treat high-strength nitrogenous wastewater. Due to the low growth rate of anaerobic ammonium-oxidizing bacteria, efficient biomass retention is essential for reactor operation. Therefore, we studied the settling ability and community composition of the anaerobic ammonium-oxidizing granules, which were cultivated in an upflow anaerobic sludge blanket (UASB) reactor seeded with aerobic granules. With this seed, the start-up period was less than 160 days at a NH(4)(+)-N removal efficiency of 94% and a loading rate of 0.064 kg N per kg volatile suspended solids per day. The formed granules were bright red and had a high settling velocity (41 to 79 m h(-1)). Cells and extracellular polymeric substances were evenly distributed over the anaerobic ammonium-oxidizing granules. The high percentage of anaerobic ammonium-oxidizing bacteria in the granules could be visualized by fluorescent in situ hybridization and electron microscopy. The copy numbers of 16S rRNA genes of anaerobic ammonium-oxidizing bacteria in the granules were determined to be 4.6 x 10(8) copies ml(-1). The results of this study could be used for a better design, shorter start-up time, and more stable operation of anammox systems for the treatment of nitrogen-rich wastewaters.

Substrate consumption and excess sludge reduction of activated sludge in the presence of uncouplers: a modeling approach.

A mathematical model with a consideration of energy spilling is developed to describe the activated sludge in the presence of different levels of metabolic uncouplers. The consumption of substrate and oxygen via energy spilling process is modeled with a Monod term, which is dependent on substrate and inhibitor. The sensitivity of the developed model is analyzed. Three parameters, maximum specific growth rate (micro(max)), energy spilling coefficient (q(max)), and sludge yield coefficient (Y(H)) are estimated with experimental data of different studies. The values of micro(max), q(max), and Y(H) are found to be 6.72 day(-1), 5.52 day(-1), and 0.60 mg COD mg(-1) COD for 2, 4-dinitrophenol and 7.20 day(-1), 1.58 day(-1), and 0.62 mg COD mg(-1) COD for 2, 4-dichlorophenol. Substrate degradation and sludge yield could be predicted with this model. The activated sludge process in the presence of uncouplers that is described more reasonably by the new model with a consideration of energy spilling. The effects of uncouplers on substrate consumption inhibition and excess sludge reduction in activated sludge are quantified with this model.