RESUMO
In order to overcome the drawbacks of Fe3O4 composite samples and greatly increase their performance in microwave absorption, magnetic Fe3O4 spindles coated with dielectric SnO2 nanorods and MnO2 nanoflakes have been successfully synthesized by a four-step simple hydrothermal route. This rationally designed magneto-dielectric ternary nanocomposite will introduce multiple reflection and conductive losses caused by its special multilayer structure and the effective complementarity of dielectric loss and magnetic loss. Therefore, its absorbing performance can be greatly improved. It is notable that the as-prepared Fe3O4@SnO2@MnO2 nanocomposites show a minimum reflection loss value of -50.40 dB at 17.92 GHz at a thickness of 3.9 mm and the absorption bandwidth ranges from 3.62 to 12.08 GHz. The as-prepared Fe3O4@SnO2@MnO2 ternary nanocomposite is expected to be a potential candidate for high-performance microwave-absorbing materials with intensive electromagnetic wave absorption and wide effective absorbing bandwidth.
RESUMO
In this work, sponge impregnated with iron pentacarbonyl was utilized to obtain a novel composite in which the carbonyl iron (CI) was embedded in a graphitized carbon matrix (CI-C). The CI that results from the thermal pyrolysis of iron pentacarbonyl can homogeneously disperse into the pore structures of the sponge skeleton, which not only improves the stability of the CI, but also modifies the impedance matching character. Moreover, the sponge bulk turns into graphitized carbon during the heat treatment (graphitized catalysis of magnetic metal on carbon at high temperature). Due to the respective strong dissipation ability of CI and the graphitized carbon matrix, the as-prepared CI-C sample exhibits a good microwave absorption performance, including expanding the effective absorption bandwidth and reduced weight, compared to pure CI. Moreover, the sample with 30 wt% paraffin loading not only shows strong reflection loss absorbing ability, but also possesses continuous dual-absorption peaks (9.96 GHz, -38.7 dB, and 13.8 GHz is -37.6 dB). This work not only extends the application of carbonyl iron as a lightweight microwave absorber with dual-absorption peaks but also initiates a new approach for artificially designed carbon-based composites via a simple sponge-impregnation method.
RESUMO
CCDC88B is a risk factor for several chronic inflammatory diseases in humans and its inactivation causes a migratory defect in DCs in mice. CCDC88B belongs to a family of cytoskeleton-associated scaffold proteins that feature protein:protein interaction domains. Here, we identified the Rho/Rac Guanine Nucleotide Exchange Factor 2 (ARHGEF2) and the RAS Protein Activator Like 3 (RASAL3) as CCDC88B physical and functional interactors. Mice defective in Arhgef2 or Rasal3 show dampened neuroinflammation, and display altered cellular response and susceptibility to colitis; ARHGEF2 maps to a human Chromosome 1 locus associated with susceptibility to IBD. Arhgef2 and Rasal3 mutant DCs show altered migration and motility in vitro, causing either reduced (Arhgef2) or enhanced (Rasal3) migratory properties. The CCDC88B/RASAL3/ARHGEF2 complex appears to regulate DCs migration by modulating activation of RHOA, with ARHGEF2 and RASAL3 acting in opposite regulatory fashions, providing a molecular mechanism for the involvement of these proteins in DCs immune functions.
Assuntos
Colite , Doenças Neuroinflamatórias , Animais , Humanos , Camundongos , Fenômenos Fisiológicos Celulares , Colite/genética , Citoesqueleto , Células Dendríticas , Fatores de Troca de Nucleotídeo Guanina Rho/genéticaRESUMO
Epstein-Barr virus (EBV) is associated with infectious mononucleosis, cancer, and multiple sclerosis. A vaccine that prevents infection and/or EBV-associated morbidity is an unmet need. The viral gH/gL glycoprotein complex is essential for infectivity, making it an attractive vaccine target. Here, we evaluate the immunogenicity of a gH/gL nanoparticle vaccine adjuvanted with the Sigma Adjuvant System (SAS) or a saponin/monophosphoryl lipid A nanoparticle (SMNP) in rhesus macaques. Formulation with SMNP elicits higher titers of neutralizing antibodies and more vaccine-specific CD4+ T cells. All but one animal in the SMNP group were infected after oral challenge with the EBV ortholog rhesus lymphocryptovirus (rhLCV). Their immune plasma had a 10- to 100-fold lower reactivity against rhLCV gH/gL compared to EBV gH/gL. Anti-EBV neutralizing monoclonal antibodies showed reduced binding to rhLCV gH/gL, demonstrating that EBV gH/gL neutralizing epitopes are poorly conserved on rhLCV gH/gL. Prevention of rhLCV infection despite antigenic disparity supports clinical development of gH/gL nanoparticle vaccines against EBV.
Assuntos
Anticorpos Neutralizantes , Herpesvirus Humano 4 , Lymphocryptovirus , Macaca mulatta , Nanopartículas , Vacinação , Animais , Nanopartículas/química , Herpesvirus Humano 4/imunologia , Lymphocryptovirus/imunologia , Vacinação/métodos , Anticorpos Neutralizantes/imunologia , Anticorpos Antivirais/imunologia , Infecções por Vírus Epstein-Barr/imunologia , Infecções por Vírus Epstein-Barr/prevenção & controle , Infecções por Vírus Epstein-Barr/virologia , Vacinas Virais/imunologia , Vacinas Virais/administração & dosagem , Adjuvantes Imunológicos/administração & dosagem , Adjuvantes Imunológicos/farmacologia , Humanos , Infecções por Herpesviridae/prevenção & controle , Infecções por Herpesviridae/imunologia , Infecções por Herpesviridae/virologiaRESUMO
The complex life cycle of Plasmodium falciparum requires coordinated gene expression regulation to allow host cell invasion, transmission, and immune evasion. Increasing evidence now suggests a major role for epigenetic mechanisms in gene expression in the parasite. In eukaryotes, many lncRNAs have been identified to be pivotal regulators of genome structure and gene expression. To investigate the regulatory roles of lncRNAs in P. falciparum we explore the intergenic lncRNA distribution in nuclear and cytoplasmic subcellular locations. Using nascent RNA expression profiles, we identify a total of 1768 lncRNAs, of which 718 (~41%) are novels in P. falciparum. The subcellular localization and stage-specific expression of several putative lncRNAs are validated using RNA-FISH. Additionally, the genome-wide occupancy of several candidate nuclear lncRNAs is explored using ChIRP. The results reveal that lncRNA occupancy sites are focal and sequence-specific with a particular enrichment for several parasite-specific gene families, including those involved in pathogenesis and sexual differentiation. Genomic and phenotypic analysis of one specific lncRNA demonstrate its importance in sexual differentiation and reproduction. Our findings bring a new level of insight into the role of lncRNAs in pathogenicity, gene regulation and sexual differentiation, opening new avenues for targeted therapeutic strategies against the deadly malaria parasite.
Assuntos
Malária Falciparum , Malária , Parasitos , RNA Longo não Codificante , Humanos , Animais , Plasmodium falciparum/genética , RNA Longo não Codificante/genética , Malária Falciparum/genéticaRESUMO
Polyurethane (PU)/flaky metal composite coatings were prepared by using PU and flaky metal powders as adhesives and pigments, respectively. The infrared emissivity of coatings with different metal content was measured by infrared emissometer, and the microstructure of PU/flaky metal composite coatings was observed by scanning electron microscopy. The results of infrared emissivity measurement indicate that the emissivity changes significantly with increasing metal content and presents a "U" type. The results of microstructure observation indicate that PU/flaky metal composite coatings have one-dimensional photonic structural characteristics. According to the microstructure characteristics, the optical reflection spectra of one-dimensional photonic structure in PU/flaky metal composite coatings with different metal content were simulated, and the results show that "U" type variation of emissivity with increasing metal content is derived from the blueshift of reflection peak wavelength with increasing metal content of one-dimensional photonic structure in coatings.
RESUMO
Diverse compounds target the Plasmodium falciparum Na+ pump PfATP4, with cipargamin and (+)-SJ733 the most clinically-advanced. In a recent clinical trial for cipargamin, recrudescent parasites emerged, with most having a G358S mutation in PfATP4. Here, we show that PfATP4G358S parasites can withstand micromolar concentrations of cipargamin and (+)-SJ733, while remaining susceptible to antimalarials that do not target PfATP4. The G358S mutation in PfATP4, and the equivalent mutation in Toxoplasma gondii ATP4, decrease the sensitivity of ATP4 to inhibition by cipargamin and (+)-SJ733, thereby protecting parasites from disruption of Na+ regulation. The G358S mutation reduces the affinity of PfATP4 for Na+ and is associated with an increase in the parasite's resting cytosolic [Na+]. However, no defect in parasite growth or transmissibility is observed. Our findings suggest that PfATP4 inhibitors in clinical development should be tested against PfATP4G358S parasites, and that their combination with unrelated antimalarials may mitigate against resistance development.
Assuntos
Antimaláricos , Malária Falciparum , Antimaláricos/farmacologia , Antimaláricos/uso terapêutico , ATPases Transportadoras de Cálcio , Eritrócitos/parasitologia , Humanos , Indóis , Íons , Malária Falciparum/tratamento farmacológico , Malária Falciparum/parasitologia , Mutação , Plasmodium falciparum , Sódio , Compostos de EspiroRESUMO
The replication cycle and pathogenesis of the Plasmodium malarial parasite involves rapid expansion in red blood cells (RBCs), and variants of certain RBC-specific proteins protect against malaria in humans. In RBCs, bisphosphoglycerate mutase (BPGM) acts as a key allosteric regulator of hemoglobin/oxyhemoglobin. We demonstrate here that a loss-of-function mutation in the murine Bpgm (BpgmL166P) gene confers protection against both Plasmodium-induced cerebral malaria and blood-stage malaria. The malaria protection seen in BpgmL166P mutant mice is associated with reduced blood parasitemia levels, milder clinical symptoms, and increased survival. The protective effect of BpgmL166P involves a dual mechanism that enhances the host's stress erythroid response to Plasmodium-driven RBC loss and simultaneously alters the intracellular milieu of the RBCs, including increased oxyhemoglobin and reduced energy metabolism, reducing Plasmodium maturation, and replication. Overall, our study highlights the importance of BPGM as a regulator of hemoglobin/oxyhemoglobin in malaria pathogenesis and suggests a new potential malaria therapeutic target.
Assuntos
Anemia/etiologia , Anemia/prevenção & controle , Bisfosfoglicerato Mutase/deficiência , Malária Cerebral/enzimologia , Malária Cerebral/prevenção & controle , Sequência de Aminoácidos , Substituição de Aminoácidos , Animais , Sequência de Bases , Bisfosfoglicerato Mutase/química , Bisfosfoglicerato Mutase/genética , Bisfosfoglicerato Mutase/metabolismo , Estabilidade Enzimática , Eritrócitos/enzimologia , Eritrócitos/parasitologia , Eritropoese , Matriz Extracelular/metabolismo , Feminino , Células HEK293 , Humanos , Malária Cerebral/complicações , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Mutantes , Mutação/genética , Parasitos/crescimento & desenvolvimento , Plasmodium/crescimento & desenvolvimento , PolicitemiaRESUMO
PbSe nanotubes have been synthesized by a facile solution route at room temperature by using precursor nanowires as both lead source and template. The structure and morphology of as prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and high resolution TEM. Finally, PbSe based infrared photodetectors were fabricated by transferring PbSe nanotubes onto prefabricated gold interdigitated electrodes. The electrical properties of individual PbSe nanotube in dark and infrared light illumination have been examined by I-V characteristics. Also, the devices present good switching properties by turning the infrared light on and off.
RESUMO
Tetra(2-isopropyl-5-methyphenoxy) copper phthalocyanine (CuPc) nanowires synthesized by a facile, low temperature self-assembled route, were incorporated into nano-devices: photoswitch and organic field-effect transistor. The devices were capable of switching on/off reversibly and fast by turning the 808 nm infrared light on/off. And the carrier mobility micro of CuPc nanowires incorporated in the devices was -0.02 cm2/V x s. The prelimenary results in this study show the potential application of metal phthalocyanine nanowires in low-cost fabrication of nano photo-electric devices.
RESUMO
Sulfur nanoparticles decorated bi-lamella composites with multiple interfaces were constructed by introducing a handful of nano-S particles into the interlayer of graphene and poly (3,4-ethylene-dioxythiophene): poly (styrenesulfonate) (GSP). Graphene and PEDOT: PSS with large surface areas and abundant functional groups offer adequate contact sites for the chemical confinement of sulfur nanoparticles. Based on the equivalent circuit theory, insulating sulfur could commendably regulate hopping conduction by slowing down the hopping electrons among the layers. Meanwhile, the substantial conductivity differences result in evident interfacial polarization (MWS effect). With the favorable permittivity behavior and multiple interfacial polarizations, more microwaves could be brought into the interior of absorber and were consumed. The GSP-paraffin composites with 35â¯wt% GSP loading possess the minimum reflection loss (RL) value of -21.9â¯dB at 1.6â¯mm, and effective absorption bandwidth of 4.72â¯GHz. This work demonstrates the significant role of multi-interfaces on microwave absorption.
RESUMO
For high-efficiency microwave absorption, both of the self loss of materials (dielectric loss and magnetic dissipation) and structural attenuation (multiple scattering, interfacial polarization) play important roles. In addition, the magnetic/dielectric materials combination, and void volume introduction can also contribute to the optimization of impedance matching. Given that, 2D cobalt nanoparticles embedded nitrogen-doped porous graphitized carbon composites (Co@N-C) were fabricated via a simple sacrificial templates method, where the CoAl-layered double hydroxide (CoAl-LDH) nanosheets were prepared to hold ZIF-67 and then decomposed during the sintering process. In this work, strong dielectric attenuation, multiple microwave scattering and dielectric polarization, as well as shortened impedance matching all make for the nice microwave absorption performance. This work not only exhibits the importance in materials selection and structure design, but also demonstrates the close relation between matching thickness and response frequency at maximum reflection loss (RL) peak.
RESUMO
Lots of work has been done to develop microwave absorbing materials (MAM) utilized as flexible electronic devices and communication instruments. Conventionally developed powder MAM are often limited in practical applications because of the bad stability and poor durability, which is out of the scope for exploiting flexible and long-term microwave absorbers. To overcome such limitations, a facile and binder-free technique from a Co-based zeolitic imidazolate framework (ZIF-67, a member of metal-organic frameworks)-coated carbon fiber precursor is developed for the in situ horizontal growth of Co3O4 nanoparticles, which embedded nitrogen-doped carbon array (triangular nanoplates) on the surface of carbon fibers in the carbon paper (NC-Co3O4/CP) as low-thickness MAM. The maximum reflection loss (RL) values reaches -16.12 and -34.34 dB when the thickness is 1.1 and 1.5 mm, respectively. As the thickness increases, the absorbing performance at low frequency performs well (RL < -20 dB). The hierarchical architecture is facilely originated from a metal-organic framework precursor. In view of the simple preparation technique, NC-Co3O4/CP exhibit huge potential in large-scale production of portable microwave absorbing electronic devices with strong microwave response at low thickness.
RESUMO
We present a sensor fabricated by simply casting ZnO nanorods on a microelectrodes array for chemical gas detection at room temperature. The ammonia and ethanol gas sensing characteristics were carefully investigated. The sensor exhibited high sensitivity for both ammonia and ethanol gases. The response and recover time are less than 20 seconds, respectively. Present results demonstrate the potential application of ZnO nanorods for fabricating highly sensitive gas sensors.
RESUMO
To satisfy the diverse requirements of low reflection and high absorption of microwave attenuation, the construction of multiple heterojunction structure is imperative. On the one hand, the impedance mismatching could be ameliorated via the addition of new component; on the other hand, the multiple interface polarizations derived from the architecture of heterojunction make for the dissipation of microwave. In this work, the ternary TiO2/RGO/Fe2O3 composites exhibit tremendous superiority compared with single TiO2 or RGO no matter the absorption coefficient or effective bandwidth. The maximum absorption value of the TiO2/RGO/Fe2O3 composites is -44.05dB at 14.48GHz with a low thickness of 2.0mm. In addition, the effective bandwidth (RL<-10dB) reaches 5.6GHz from 11.96 to 17.56GHz. The superior electromagnetic wave absorbing performance of the TiO2/RGO/Fe2O3 composites derived from the appropriate impedance matching as well as the multiple polarization effect. The results adequately demonstrate the accessibility of the prepared TiO2/RGO/Fe2O3 composites as a preeminent absorber.
RESUMO
The magnet/dielectric composites with tunable structure and composition have drawn much attention because of their particular merits in magnetoelectric properties compared with the sole dielectric or magnetic composites. In addition, porous materials at the nanoscale can satisfy the growing requirements in many industries. Therefore, constructing porous metal alloy/carbon nanocomposites is to be an admirable option. Unfortunately, traditional synthesis methods involve multistep routes and complicated insert-and-remove templates approaches. Here we report a facile process to synthesize CoxNiy/C composites via a spontaneous cross-linking reaction and subsequent calcination process, during which multiple processes, including reducing polyvalent metal ions, forming alloy, and encapsulating alloy nanoparticles into porous carbon matrix, are achieved almost simultaneously. By adjusting the feed ratio of Co2+ to Ni2+ ions, controllable composition of CoxNiy/C composites can be gained. It should be noted that the CoxNiy/C composites are demonstrated to be excellent microwave absorbers from every aspect of assessment criteria including reflection loss, effective bandwidth, thickness, and weight of absorber. Our study opens up a promising technique for the synthesis of alloy/carbon composites with porous nanostructures with target functionalities.
RESUMO
A novel yolk-shell structure of cobalt nanoparticle embedded nanoporous carbon@carbonyl iron (Co/NPC@Void@CI) was synthesized via metal organic chemical vapor deposition (MOCVD) and subsequent calcination treatment. The in situ generation of void layer, which originated from the shrink of a Co-based zeolitic imidazolate framework (ZIF-67) during carbonization, embodies distinct advantage compared to the conventional template method. Thanks to the introduction of custom-designed dielectric/magnetic media heterostructure and multiple interfaces, the composites filled with 40 wt % of Co/NPC@Void@CI samples in paraffin exhibit a maximum reflection loss of -49.2 dB at 2.2 mm; importantly, a broad absorption bandwidth (RL < -10 dB) of 6.72 GHz can be obtained, which covers more than one-third of the whole frequency region from 10.56 to 17.28 GHz. This study not only develops the application of carbonyl iron as a high-efficiency light absorber but also initiates a fire-new avenue for artificially designed heterostructures with target functionalities.
RESUMO
Owing to their immense potential in functionalized applications, tremendous interest has been devoted to the design and synthesis of nanostructures. The introduction of sufficient amount of microwaves into the absorbers on the premise that the dissipation capacity is strong enough remains a key challenge. Pursuing a general methodology to overcome the incompatibility is of great importance. There is widespread interest in designing the materials with specific architectures. Herein, the common absorber candidates were chosen to feature the hierarchical porous Fe3O4@C@Fe3O4 nanospheres. Due to the reduced skin effect (induced by low-conductivity Fe3O4 outer layer), multiple interfacial polarizations and scattering (due to the ternary hierarchical structures and nanoporous inner core) as well as the improved magnetic dissipation ability (because of multiple magnetic components), the material design enabled a promising microwave absorption performance. This study not only illustrates the primary mechanisms for the improved microwave absorption performance but also underscores the potential in designing the particular architectures as a strategy for achieving the compatibility characteristics.
RESUMO
Ni(x)Pb(1-x) nanowire arrays were successfully fabricated by AC electrodeposition within the nanopores of ordered porous alumina films prepared by a two-step anodization. Transmission electron microscopy analyses showed that the Ni-Pb nanoarrays are polycrystalline with dimension uniformity around 20 nm in diameter and lengths up to several micrometers. X-ray diffraction results revealed that the face-centered-cubic (fcc) Ni and fcc Pb peaks are detected when the Ni component (x) is below 0.71, indicating that the Ni(x)Pb(1-x) nanoarrays do not form metastable phase alloy. Hysteresis loops determined by vibrating sample magnetometer indicated that the Ni(x)Pb(1-x) nanoarrays obtained possess obvious magnetic anisotropy, and the perpendicular coercivity was lower than that of pure Ni nanowries before and after annealing. Annealing under magnetic field was carried out to examine the effect of a magnetic field on magnetic properties using an electromagnet field up to 0.3 T.
RESUMO
Mimicking the highly organized brick-and-mortar structure of nacre, a kind of nacre-like organic-inorganic composite material of polyurethane (PU)/flaky bronze composite coatings with low infrared emissivity was successfully designed and prepared by using PU and flaky bronze powders as adhesives and pigments, respectively. The infrared emissivity and microstructure of the coatings were systematically investigated by infrared emissometer and scanning electron microscopy, respectively, and the cause of low infrared emissivity of the coatings was discussed by using the theories of one-dimensional photonic structure. The results show that the infrared emissivity of the nacre-like PU/flaky bronze composite coatings can be as low as 0.206 at the bronze content of 60 wt. %, and it is significantly lower than the value of PU/sphere bronze composite coatings. Microstructure observation illustrated that the nacre-like PU/flaky bronze composite coatings have similar one-dimensional photonic structural characteristics. The low infrared emissivity of PU/flaky bronze composite coatings is derived from the similar one-dimensional photonic structure in the coatings.