RESUMO
Clean room facilities are becoming more popular in both academic and industry settings, including low-and middle-income countries. This has led to an increased demand for cost-effective gas sensors to monitor air quality. Here we have developed a gas sensor using CoNiO2nanoparticles through combustion method. The sensitivity and selectivity of the sensor towards CO2were influenced by the structure of the nanoparticles, which were affected by the reducing agent (biofuels) used during synthesis. Among all reducing agents, urea found to yield highly crystalline and uniformly distributed CoNiO2nanoparticles, which when developed into sensors showed high sensitivity and selectivity for the detection of CO2gas in the presence of common interfering volatile organic compounds observed in cleanroom facilities including ammonia, formaldehyde, acetone, toluene, ethanol, isopropanol and methanol. In addition, the urea-mediated nanoparticle-based sensors exhibited room temperature operation, high stability, prompt response and recovery rates, and excellent reproducibility. Consequently, the synthesis approach to nanoparticle-based, energy efficient and affordable sensors represent a benchmark for CO2sensing in cleanroom settings.
Assuntos
Dióxido de Carbono , Nanopartículas , Ureia , Dióxido de Carbono/análise , Dióxido de Carbono/química , Ureia/análise , Nanopartículas/química , Compostos Orgânicos Voláteis/análise , Dióxido de Silício/química , Reprodutibilidade dos TestesRESUMO
Diabetes is a major health challenge, and it is linked to a number of serious health issues, including cardiovascular disease (heart attack and stroke), diabetic nephropathy (kidney damage or failure), and birth defects. The detection of glucose has a direct and significant clinical importance in the management of diabetes. Herein, we demonstrate the application of in-situ synthesized Ti2C-TiO2 MXene nanocomposite for high throughput non-enzymatic electrochemical sensing of glucose. The nanocomposite was synthesized by controlled oxidation of Ti2C-MXene nanosheets using H2O2 at room temperature. The oxidation results in the opening up of Ti2C-MXene nanosheets and the formation of TiO2 nanocrystals on their surfaces as revealed in microscopic and spectroscopic analysis. Nanocomposite exhibited considerably high electrochemical response than parent Ti2C MXene, and hence utilized as a novel electrode material for enzyme-free sensitive and specific detection of glucose. Developed nanocomposite-based non-enzymatic glucose sensor (NEGS) displays a wide linearity range (0.1 µM-200 µM, R2 = 0.992), high sensitivity of 75.32 µA mM-1 cm-2, a low limit of detection (0.12 µM) and a rapid response time (~3s). NEGS has further shown a high level of repeatability and selectivity for glucose in serum spiked samples. The unveiled excellent sensing performance of NEGS is credited to synergistically improved electrochemical response of Ti2C MXene and TiO2 nanoparticles. All of these attributes highlight the potential of MXene nanocomposite as a next-generation NEGS for on the spot mass screening of diabetic patients.
Assuntos
Diabetes Mellitus , Nanocompostos , Diabetes Mellitus/diagnóstico , Glucose/análise , Humanos , Peróxido de Hidrogênio/análise , Nanocompostos/química , Titânio/químicaRESUMO
The purpose of this research was to investigate the adsorption of arsenic (As) from aqueous solutions using MPAC-500 and MPAC-600 (magnetic-activated carbons synthesized from the peel of Pisum sativum (pea) pyrolyzed at 500 °C and 600 °C temperatures, respectively). The potential of both biosorbents for As adsorption was determined in batch and column mode. The characterization of both biosorbents was performed by energy dispersive spectroscopy, scanning electron microscope, pHZPC, particle size distribution, X-ray diffraction, zeta potential and Fourier-transform infrared spectroscopy. It was found that the efficiency of MPAC-600 was better than MPAC-500 for the adsorption of As(III) and As(V) ions. The adsorption capacities of MPAC-500 and MPAC-600 in removing As(III) were 0.7297 mg/g and 1.3335 mg/g, respectively, while the values of Qmax for As(V) on MPAC-500 and MPAC-600 were 0.4930 mg/g and 0.9451 mg/g, respectively. The Langmuir isotherm model was found to be the best fit for adsorption of As(III) by MPAC-500 and MPAC-600, as well as adsorption of As(V) by MPAC-500. The Freundlich isotherm model, on the other hand, was optimal for As(V) removal with MPAC-600. With R2 values close to unity, the pseudo-second-order kinetics were best fitted to the adsorption process of both As species. The Thomas model was used to estimate the breakthrough curves. The effects of coexisting oxyanions and regeneration studies were also carried out to examine the influence of oxyanions on As adsorption and reusability of biosorbents.
Assuntos
Arsênio , Poluentes Químicos da Água , Adsorção , Arsênio/química , Biomassa , Concentração de Íons de Hidrogênio , Cinética , Fenômenos Magnéticos , Pisum sativum , Espectroscopia de Infravermelho com Transformada de Fourier , Termodinâmica , Água , Poluentes Químicos da Água/químicaRESUMO
This study introduces an inventive acetone-sensing device seamlessly integrated into a disposable face mask, enabling real-time continuous breath monitoring. The sensor demonstrates exceptional sensitivity, registering a response of 8.22 at 1 ppm and an impressive sensor response of 57.33 at 100 ppm of acetone concentration. Particularly noteworthy is the remarkable lower limit of detection (LOD) of 0.076 ppm within the concentration range of 0.1-0.8 ppm, underscored by a robust R2 value of 0.994. To validate practicality, the Pd/WO3 sensor was fabricated onto cellulose paper and utilized for real-time breath analysis, yielding a substantial sensor response of 1.70 at 8 vol% (equivalent to a single exhale breath volume). The unique design incorporates a built-in disposable face mask, facilitating dependable and convenient real-time breath analysis. Additionally, this research explores the profound impact of introducing acetone and Pd atoms on the energy levels and dipole moments. The species elucidated through density functional theory (DFT) investigations encompassing WO3, WO3-acetone, Pd-WO3, and Pd-WO3-acetone species. This work presents an innovative and cost-effective approach for developing a portable, non-invasive, and highly sensitive acetone-sensing device, effectively integrated into a disposable face mask for real-time breath analysis. This pioneering technology holds immense potential for various applications in healthcare and beyond.
Assuntos
Acetona , Diabetes Mellitus , Humanos , Máscaras , Limite de Detecção , ExpiraçãoRESUMO
Sulfur-doped graphitic carbon nitride (S-g-CN) has gained significant attention in recent years. Sulfur-doped graphitic carbon nitride (S-g-CN) is a promising metal-free photocatalyst because of its band orientation, natural abundance and groundwork. Improved photocatalytic activity of S-g-CN material for solar chemical production persists a hot yet challenging problem. Herein, we provide an adaptable method for the synthesis of S-g-CN nanocomposite decorated with the moiety of giant polyoxometalate (S-g-CN/Mo-368) that subsequently showed highly efficient photocatalytic activity. The as-synthesized S-g-CN/Mo-368 as a recyclable artificial photocatalyst revealed excellent activity for solar chemical production, that is nicotinamide adenine dinucleotide (NADH) regeneration under visible light. The immobilized Mo-368 on the S-g-CN surface increased the visible light adsorption capacity of the S-g-CN/Mo-368 photocatalyst. The visible light absorption activity, morphology, element compositions, particle size and zeta potential of S-g-CN powder and S-g-CN/Mo-368 were thoroughly investigated. From the application point of view, S-g-CN/Mo-368 was applied to determine the solar chemical production (i.e. NADH regeneration) under visible light with a higher yield% of about ~ 94.85%.
Assuntos
NAD , Compostos de Nitrogênio , Ânions , Grafite , Luz , Compostos de Nitrogênio/química , Polieletrólitos , EnxofreRESUMO
Covalent triazine frameworks (CTFs), belonging to the super-family of covalent organic frameworks, have attracted significant attention as a new type of photosensitizer due to the superb light-harvesting ability and efficient charge transfer originating from the large surface area. However, the wide optical band gap in CTFs, which is larger than 3.0 eV, hinders the efficient light harvesting in the visible range. To overcome this limitation, we developed the new type CTFs photocatalyst based on the donor-acceptor conjugation scheme by using melamine (M) and 2,6-diaminoanthraquinone (AQ) as monomeric units. The melamine-2,6-diaminoanthraquinone-based covalent triazine frameworks (M-AQ-CTFs) photocatalyst shows the excellent light-harvesting capacity with high molar extinction coefficient, and the suitable optical band gap involving the internal charge transfer character. Combination of M-AQ-CTFs and artificial photosynthetic system including the organometallic rhodium complex, acting as an electron mediator, exhibited the excellent photocatalytic efficiency for the regeneration of the nicotinamide cofactors such as NAD(P)H. In addition, this photocatalyst showed the high photocatalytic efficiency for the metal-free aerobic oxidation of sulfide. This study demonstrates the high potential of CTFs photocatalyst with the donor-acceptor conjugated scheme can be actively used for artificial photosynthesis.
Assuntos
Estruturas Metalorgânicas , NAD , Oxirredução , Sulfetos , TriazinasRESUMO
A global challenge faced by light harvesting photocatalyst is how to promote the selective organic transformation, such as C-S bond formation via radical-radical coupling under solar light. Here, we report a two-dimensional covalent organic frameworks (2D-COFs), poly (perylene-imide-benzoquinone) nanorod through in situ condensation on flexible activated carbon cloth (PPIBNR-FACC) to function as a light harvester material for highly selective radical-radical coupling to vinyl sulfides (i.e. C-S bond activation). Such a structure supports charge transfer from PPIBNR to FACC, which is essential for the selective radical-radical coupling. Hence, organic transformation is attaining high yields and selectivity (Ë99%) under solar light using in situ prepared PPIBNR-FACC photocatalyst. The structural virtues of PPIBNR-FACC will trigger the utmost investigations into designable and versatile 2D-COFs for fine chemical synthesis.
RESUMO
VO2 (B) nanorods with average width ranging between 50-100 nm are synthesized via a hydrothermal method and the post hydrothermal treatment drying temperature is found to be influential in their overall phase and growth morphology evolution. The nanorods with unusually high optical bandgap for a VO2 material are effective in enhancing the thermal performance of ethylene glycol nanofluids over a wide temperature range as is indicated by the temperature dependent thermal conductivity measurements. Humidity and LPG sensors fabricated using the VO2 (B) nanorods bear testament to their efficient sensing performance, which can be partially attributed to the mesoporous nature of the nanorods.