Denary High-Entropy Oxide Nanoparticles Synthesized by a Continuous Supercritical Hydrothermal Flow Process.

High-entropy oxide nanoparticles (HEO NPs) have been intensively studied because of their attractive properties, such as high stability and enhanced catalytic activity. In this work, for the first time, denary HEO NPs were successfully synthesized using a continuous supercritical hydrothermal flow process without calcination. Interestingly, this process allows the formation of HEO NPs on the order of seconds at a relatively lower temperature. The synthesized HEO NPs contained 10 metal elements, La, Ca, Sr, Ba, Fe, Mn, Co, Ru, Pd, and Ir, and had a perovskite-type structure. Atomic-resolution high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy measurements revealed homogeneous dispersion of the 10 metal elements. The obtained HEO NPs also exhibited a higher catalytic activity for the CO oxidation reaction than that of the LaFeO3 NPs.

Self-Assembled Crystalline Bundles in Soluble Metal-Organic Nanotubes.

The use of nanotubes in the solution state is crucial not only for the exploration of physical and chemical behaviors at the molecular level but also for application such as thin-film fabrication. Surface modification is generally used to solubilize carbon nanotubes (CNTs) and various synthetic nanotubes; however, this method may affect the surface properties of the original nanotubes, and the detailed crystal structure obtained after modification is unclear. Here, we report the synthesis of a crystalline and soluble metal-organic nanotube consisting of a cationic tubular framework and an anion with a long alkyl chain. The nanotubular structures are formed not only in the solid state but also in the solution state, as confirmed by an X-ray structural analysis, optical measurements, and electron microscopy studies. This nanotube system is realized in different states without any surface modification, which is quite different from typical CNTs and synthetic nanotubes. In addition, self-assembled crystalline bundles are directly observed using transmission electron microscopy (TEM) for the first time in a metal-organic nanotube system. The bundle structures are also confirmed by atomic force microscopy (AFM) observations of thin nanotube films. We envisage a systematic design of such soluble metal-organic nanotubes that will enable direct observation of mass transport behavior in channels of bundles or a single nanotube, as well as a wide range of thin-film applications.

Continuous-Flow Chemical Synthesis for Sub-2 nm Ultra-Multielement Alloy Nanoparticles Consisting of Group IV to XV Elements.

Multielement alloy nanoparticles have attracted much attention due to their attractive catalytic properties derived from the multiple interactions of adjacent multielement atoms. However, mixing multiple elements in ultrasmall nanoparticles from a wide range of elements on the periodic table is still challenging because the elements have different properties and miscibility. Herein, we developed a benchtop 4-way flow reactor for chemical synthesis of ultra-multielement alloy (UMEA) nanoparticles composed of d-block and p-block elements. BiCoCuFeGaInIrNiPdPtRhRuSbSnTi 15-element alloy nanoparticles composed of group IV to XV elements were synthesized by sequential injection of metal precursors using the reactor. This methodology realized the formation of UMEA nanoparticles at low temperature (66 °C), resulting in a 1.9 nm ultrasmall average particle size. The UMEA nanoparticles have high durability and activity for electrochemical alcohol oxidation reactions and high tolerance to CO poisoning. These results suggest that the multiple interactions of UMEA efficiently promote the multistep alcohol oxidation reaction.

Molybdenum-Ruthenium-Carbon Solid-Solution Alloy Nanoparticles: Can They Be Pseudo-Technetium Carbide?

Technetium (Tc), atomic number 43, is an element that humans cannot freely use even in the 21st century because Tc is radioactive and has no stable isotope. In this report, we present molybdenum-ruthenium-carbon solid-solution alloy (MoxRu1-xCy) nanoparticles (NPs) that are expected to have an electronic structure similar to that of technetium carbide (TcCy). MoxRu1-xCy NPs were synthesized by annealing under a helium/hydrogen atmosphere following thermal decomposition of metal precursors. The obtained NPs had a solid-solution structure in the whole composition range. MoxRu1-xCy with a cubic structure (down to 30 atom % Mo in the metal ratio) showed a superconducting state, and the transition temperature (Tc) increased with increasing Mo composition. The continuous change in Tc across that of TcCy indicates the continuous control of the electronic structure by solid-solution alloying, leading to pseudo-TcCy. Density functional theory calculations indicated that the synthesized Mo0.53Ru0.47C0.41 has a similar electronic structure to TcC0.41.

Crystal Structure Control of Binary and Ternary Solid-Solution Alloy Nanoparticles with a Face-Centered Cubic or Hexagonal Close-Packed Phase.

The crystal structure significantly affects the physical and chemical properties of solids. However, the crystal structure-dependent properties of alloys are rarely studied because controlling the crystal structure of an alloy at the same composition is extremely difficult. Here, for the first time, we successfully demonstrate the synthesis of binary Ru-Pt (Ru/Pt = 7:3) and Ru-Ir (Ru/Ir = 7:3) and ternary Ru-Ir-Pt (Ru/Ir/Pt = 7:1.5:1.5) solid-solution alloy nanoparticles (NPs) with well-controlled hexagonal close-packed (hcp) and face-centered cubic (fcc) phases, through the chemical reduction method. The crystal structure control is realized by precisely tunning the reduction speeds of the metal precursors. The effect of the crystal structure on the catalytic performance of solid-solution alloy NPs is systematically investigated. Impressively, all the hcp alloy NPs show superior electrocatalytic activities for the hydrogen evolution reaction in alkaline solution compared with the fcc alloy NPs. In particular, hcp-RuIrPt exhibits extremely high intrinsic (mass) activity, which is 3.1 (3.2) and 6.7 (6.9) times enhanced compared to that of fcc-RuIrPt and commercial Pt/C.

Continuous-Flow Reactor Synthesis for Homogeneous 1 nm-Sized Extremely Small High-Entropy Alloy Nanoparticles.

High-entropy alloy nanoparticles (HEA NPs) emerged as catalysts with superior performances that are not shown in monometallic catalysts. Although many kinds of synthesis techniques of HEA NPs have been developed recently, synthesizing HEA NPs with ultrasmall particle size and narrow size distribution remains challenging because most of the reported synthesis methods require high temperatures that accelerate particle growth. This work provides a new methodology for the fabrication of ultrasmall and homogeneous HEA NPs using a continuous-flow reactor with a liquid-phase reduction method. We successfully synthesized ultrasmall IrPdPtRhRu HEA NPs (1.32 ± 0.41 nm), theoretically each consisting of approximately 50 atoms. This average size is the smallest ever reported for HEA NPs. All five elements are homogeneously mixed at the atomic level in each particle. The obtained HEA NPs marked a significantly high hydrogen evolution reaction (HER) activity with a very small 6 mV overpotential at 10 mA/cm-2 in acid, which is one-third of the overpotential of commercial Pt/C. In addition, although mass production of HEA NPs is still difficult, this flow synthesis can provide high productivity with high reproducibility, which is more energy efficient and suitable for mass production. Therefore, this study reports the 1 nm-sized HEA NPs with remarkably high HER activity and establishes a platform for the production of ultrasmall and homogeneous HEA NPs.

Noble-Metal High-Entropy-Alloy Nanoparticles: Atomic-Level Insight into the Electronic Structure.

The compositional space of high-entropy-alloy nanoparticles (HEA NPs) significantly expands the diversity of the materials library. Every atom in HEA NPs has a different elemental coordination environment, which requires knowledge of the local electronic structure at an atomic level. However, such structure has not been disclosed experimentally or theoretically. We synthesized HEA NPs composed of all eight noble-metal-group elements (NM-HEA) for the first time. Their electronic structure was revealed by hard X-ray photoelectron spectroscopy and density function theory calculations with NP models. The NM-HEA NPs have a lower degeneracy in energy level compared with the monometallic NPs, which is a common feature of HEA NPs. The local density of states (LDOS) of every surface atom was first revealed. Some atoms of the same constituent element in HEA NPs have different LDOS profiles, whereas atoms of other elements have similar LDOS profiles. In other words, one atom in HEA loses its elemental identity and it may be possible to create an ideal LDOS by adjusting the neighboring atoms. The tendency of the electronic structure change was shown by supervised learning. The NM-HEA NPs showed 10.8-times higher intrinsic activity for hydrogen evolution reaction than commercial Pt/C, which is one of the best catalysts.

Understanding Micro and Atomic Structures of Secondary Phases in Cu-Doped SnTe.

Highly efficient thermoelectric materials require, including point defects within the host matrix, secondary phases generating positive effects on lowering lattice thermal conductivity (κL ). Amongst effective dopants for a functional thermoelectric material, SnTe, Cu doping realizes the ultra-low κL approaching the SnTe amorphous limit. Such effective κL reduction is first attributed to strong phonon scattering by substitutional Cu atoms at Sn sites and interstitial defects in the host SnTe. However, other crystallographic defects in secondary phases have been unfocused. Here, this work reports micro- to atomic-scale characterization on secondary phases of Cu-doped SnTe using advanced microscopes. It is found that Cu-rich secondary phases begin precipitation ≈1.7 at% Cu (x = 0.034 where Sn1- x Cux Te). The Cu-rich secondary phases encapsulate two distinct solids: Cu2 SnTe3 ( F 4 ¯ 3 m $F\bar{4}3m$ ) has semi-coherent interfaces with SnTe ( F m 3 ¯ m $Fm\bar{3}{\rm{m}}$ ) such that they minimize lattice mismatch to favor the thermoelectric transport; the other resembles a stoichiometric Cu2 Te model, yet is so meta-stable that it demonstrates not only various defects such as dislocation cores and ordered/disordered Cu vacancies, but also dynamic grain-boundary migration with heating and a subsequent phase transition ≈350 °C. The atomic-scale analysis on the Cu-rich secondary phases offers viable strategies for reducing κL through Cu addition to SnTe.

Combination therapy of modified electroconvulsive therapy and long-acting injectable aripiprazole for dopamine supersensitivity psychosis: a case report.

In the treatment of schizophrenia, long-term pharmacotherapy with D2-receptor antagonists can induce dopamine supersensitivity psychosis (DSP). We report a male patient with schizophrenia with suspected DSP due to excessive polypharmacy. He was hospitalized for several years. Most psychotropic drugs were reduced and subsequently stopped without the exacerbation of symptoms by administering modified electroconvulsive therapy (mECT). Aripiprazole was then selected as the main drug for treatment, which was subsequently changed to the long-acting injection formulation. He was eventually discharged and returned home. Combination therapy with mECT and aripiprazole, especially the long-acting injectable formulation, may help improve and prevent DSP.

Fabrication of Integrated Copper-Based Nanoparticles/Amorphous Metal-Organic Framework by a Facile Spray-Drying Method: Highly Enhanced CO2 Hydrogenation Activity for Methanol Synthesis.

We report on Cu/amUiO-66, a composite made of Cu nanoparticles (NPs) and amorphous [Zr6 O4 (OH)4 (BDC)6 ] (amUiO-66, BDC=1,4-benzenedicarboxylate), and Cu-ZnO/amUiO-66 made of Cu-ZnO nanocomposites and amUiO-66. Both structures were obtained via a spray-drying method and characterized using high-resolution transmission electron microscopy, energy dispersive spectra, powder X-ray diffraction and extended X-ray absorption fine structure. The catalytic activity of Cu/amUiO-66 for CO2 hydrogenation to methanol was 3-fold that of Cu/crystalline UiO-66. Moreover, Cu-ZnO/amUiO-66 enhanced the methanol production rate by 1.5-fold compared with Cu/amUiO-66 and 2.5-fold compared with γ-Al2 O3 -supported Cu-ZnO nanocomposites (Cu-ZnO/γ-Al2 O3 ) as the representative hydrogenation catalyst. The high catalytic performance was investigated using in situ Fourier transform IR spectra. This is a first report of a catalyst comprising metal NPs and an amorphous metal-organic framework in a gas-phase reaction.

Platinum-Group-Metal High-Entropy-Alloy Nanoparticles.

The platinum-group metals (PGMs) are six neighboring elements in the periodic table of the elements. Each PGM can efficiently promote unique reactions, and therefore, alloying PGMs would create ideal catalysts for complex or multistep reactions that involve several reactants and intermediates. Thus, high-entropy-alloy (HEA) nanoparticles (NPs) of all six PGMs (denoted as PGM-HEA) having a great variety of adsorption sites on their surfaces could be ideal candidates to catalyze complex reactions. Here, we report for the first time PGM-HEA and demonstrate that PGM-HEA efficiently promotes the ethanol oxidation reaction (EOR) with complex 12-electron/12-proton transfer processes. PGM-HEA shows 2.5 (3.2), 6.1 (9.7), and 12.8 (3.4) times higher activity than the commercial Pd/C, Pd black and Pt/C catalysts in terms of intrinsic (mass) activity, respectively. Remarkably, it records more than 1.5 times higher mass activity than the most active catalyst to date. Our findings pave the way for promoting complex or multistep reactions that are seldom realized by mono- or bimetallic catalysts.

Significant Enhancement of Hydrogen Evolution Reaction Activity by Negatively Charged Pt through Light Doping of W.

We report novel PtW solid-solution nanoparticles (NPs) produced through electrochemical cleaning of core/shell PtW@WO3 NPs. The resulting PtW NPs achieved a record hydrogen evolution reaction (HER) performance as a class of Pt-based solid-solution alloys. A current density of 10 mA cm-2 was reached with an overpotential of 19.4 mV, which is significantly lower than that of a commercial Pt catalyst (26.3 mV). The PtW NPs also exhibited long-term stability. Theoretical calculations revealed that negatively charged Pt atoms adjacent to a W atom provide favorable hydrogen adsorption energies for the HER, realizing significantly enhanced HER activity.

Rational Synthesis for a Noble Metal Carbide.

Transition metal carbides have attractive physical and chemical properties that are much different from their parent metals. Particularly, noble metal carbides are expected to be promising materials for a variety of applications, particularly as efficient catalysts. However, noble metal carbides have rarely been obtained because carbide phases do not appear in noble metal-carbon phase diagrams and a reasonable synthesis method to make noble metal carbides has not yet been established. Here, we propose a new synthesis method for noble metal carbides and describe the first synthesis of rhodium carbide using tetracyanoethylene (TCNE). The rhodium carbide was synthesized without extreme conditions, such as the very high temperature and/or pressure typically required in conventional carbide syntheses. Moreover, we investigated the electronic structure and catalytic activity for the hydrogen evolution reaction (HER). We found that rhodium carbide has much higher catalytic activity for HER than pure Rh. Our study provides a feasible strategy to create new metal carbides to help advance the field of materials science.

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity.

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cux Ru1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.

Influence of the Crystal Structure of Titanium Oxide on the Catalytic Activity of Rh/TiO2 in Steam Reforming of Propane at Low Temperature.

Solid oxide fuel cells (SOFCs) with liquefied petroleum gas (LPG) reduce CO2 emissions due to their high-energy-conversion efficiency. Although SOFCs can convert LPG directly, coking occurs easily by decomposition of hydrocarbons, including C-C bonds on the electrode of fuel cell stacks. It is therefore necessary to develop an active steam pre-reforming catalyst that eliminates the hydrocarbons at low temperature, in which waste heat of SOFCs is used. Herein, we show that the crystal structure of the TiO2 that anchors Rh particles is crucial for catalytic activity of Rh/TiO2 catalysts for propane pre-reforming. Our experimental results revealed that strong metal support interaction (SMSI) induced during H2 pre-reduction were optimized over Rh/TiO2 with a rutile structure; this catalyst catalyzed the reaction much more effectively than conventional Rh/γ-Al2 O3 . In contrast, the SMSI was too strong for Rh/TiO2 with an anatase structure, and the surface of the Rh particles was therefore covered mostly with partially reduced TiO2 . The result was very low activity.

Solid-Solution Alloy Nanoparticles of the Immiscible Iridium-Copper System with a Wide Composition Range for Enhanced Electrocatalytic Applications.

For the first time, we synthesize solid-solution alloy nanoparticles of Ir and Cu with a size of ca. 2 nm, despite Ir and Cu being immiscible in the bulk up to their melting over the whole composition range. We performed a systematic characterization on the nature of the Irx Cu1-x solid-solution alloys using powder X-ray diffraction, scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The results showed that the Irx Cu1-x alloys had a face-centered-cubic structure; charge transfer from Cu to Ir occurred in the alloy nanoparticles, as the core-level Ir 4f peaks shifted to lower energy region with the increase in Cu content. Furthermore, we observed that the alloying of Ir with Cu enhanced both the electrocatalytic oxygen evolution and oxygen reduction reactions. The enhanced activities could be attributed to the electronic interaction between Ir and Cu arising from the alloying effect at atomic-level.

Solid-Solution Alloying of Immiscible Ru and Cu with Enhanced CO Oxidation Activity.

We report on novel solid-solution alloy nanoparticles (NPs) of Ru and Cu that are completely immiscible even above melting point in bulk phase. Powder X-ray diffraction, scanning transmission electron microscopy, and energy-dispersive X-ray measurements demonstrated that Ru and Cu atoms were homogeneously distributed in the alloy NPs. Ru0.5Cu0.5 NPs demonstrated higher CO oxidation activity than fcc-Ru NPs, which are known as one of the best monometallic CO oxidation catalysts.

First-Principles Calculation, Synthesis, and Catalytic Properties of Rh-Cu Alloy Nanoparticles.

The first synthesis of pure Rh1-x Cux solid-solution nanoparticles is reported. In contrast to the bulk state, the solid-solution phase was stable up to 750 °C. Based on facile density-functional calculations, we made a prediction that the catalytic activity of Rh1-x Cux can be maintained even with 50 at % replacement of Rh with Cu. The prediction was confirmed for the catalytic activities on CO and NOx conversions.

Encapsulation of Bimetallic Metal Nanoparticles into Robust Zirconium-Based Metal-Organic Frameworks: Evaluation of the Catalytic Potential for Size-Selective Hydrogenation.

The realization of metal nanoparticles (NPs) with bimetallic character and distinct composition for specific catalytic applications is an intensively studied field. Due to the synergy between metals, most bimetallic particles exhibit unique properties that are hardly provided by the individual monometallic counterparts. However, as small-sized NPs possess high surface energy, agglomeration during catalytic reactions is favored. Sufficient stabilization can be achieved by confinement of NPs in porous support materials. In this sense, metal-organic frameworks (MOFs) in particular have gained a lot of attention during the last years; however, encapsulation of bimetallic species remains challenging. Herein, the exclusive embedding of preformed core-shell PdPt and RuPt NPs into chemically robust Zr-based MOFs is presented. Microstructural characterization manifests partial retention of the core-shell systems after successful encapsulation without harming the crystallinity of the microporous support. The resulting chemically robust NP@UiO-66 materials exhibit enhanced catalytic activity towards the liquid-phase hydrogenation of nitrobenzene, competitive with commercially used Pt on activated carbon, but with superior size-selectivity for sterically varied substrates.

Discovery of Hexagonal Structured Pd-B Nanocrystals.

We report on hexagonal close-packed (hcp) palladium (Pd)-boron (B) nanocrystals (NCs) by heavy B doping into face-centered cubic (fcc) Pd NCs. Scanning transmission electron microscopy-electron energy loss spectroscopy and synchrotron powder X-ray diffraction measurements demonstrated that the B atoms are homogeneously distributed inside the hcp Pd lattice. The large paramagnetic susceptibility of Pd is significantly suppressed in Pd-B NCs in good agreement with the reduction of density of states at Fermi energy suggested by X-ray absorption near-edge structure and theoretical calculations.