Advancing Microfluidic Immunity Testing Systems: New Trends for Microbial Pathogen Detection.

Pathogenic microorganisms play a crucial role in the global disease burden due to their ability to cause various diseases and spread through multiple transmission routes. Immunity tests identify antigens related to these pathogens, thereby confirming past infections and monitoring the host's immune response. Traditional pathogen detection methods, including enzyme-linked immunosorbent assays (ELISAs) and chemiluminescent immunoassays (CLIAs), are often labor-intensive, slow, and reliant on sophisticated equipment and skilled personnel, which can be limiting in resource-poor settings. In contrast, the development of microfluidic technologies presents a promising alternative, offering automation, miniaturization, and cost efficiency. These advanced methods are poised to replace traditional assays by streamlining processes and enabling rapid, high-throughput immunity testing for pathogens. This review highlights the latest advancements in microfluidic systems designed for rapid and high-throughput immunity testing, incorporating immunosensors, single molecule arrays (Simoas), a lateral flow assay (LFA), and smartphone integration. It focuses on key pathogenic microorganisms such as SARS-CoV-2, influenza, and the ZIKA virus (ZIKV). Additionally, the review discusses the challenges, commercialization prospects, and future directions to advance microfluidic systems for infectious disease detection.

Advances in Nucleic Acid Assays for Infectious Disease: The Role of Microfluidic Technology.

Within the fields of infectious disease diagnostics, microfluidic-based integrated technology systems have become a vital technology in enhancing the rapidity, accuracy, and portability of pathogen detection. These systems synergize microfluidic techniques with advanced molecular biology methods, including reverse transcription polymerase chain reaction (RT-PCR), loop-mediated isothermal amplification (LAMP), and clustered regularly interspaced short palindromic repeats (CRISPR), have been successfully used to identify a diverse array of pathogens, including COVID-19, Ebola, Zika, and dengue fever. This review outlines the advances in pathogen detection, attributing them to the integration of microfluidic technology with traditional molecular biology methods and smartphone- and paper-based diagnostic assays. The cutting-edge diagnostic technologies are of critical importance for disease prevention and epidemic surveillance. Looking ahead, research is expected to focus on increasing detection sensitivity, streamlining testing processes, reducing costs, and enhancing the capability for remote data sharing. These improvements aim to achieve broader coverage and quicker response mechanisms, thereby constructing a more robust defense for global public health security.

Topological Regulating Bismuth Nano-Semiconductor for Immunogenic Cell Death-Mediated Sonocatalytic Hyperthermia Therapy.

Immunogenic cell death (ICD) can activate the body's immune system via dead cell antigens to achieve immunotherapy. Currently, small molecule drugs have been used for ICD treatment in clinical, however, how to precisely control the induced ICD while treating tumors is of great significance for improving therapeutic efficacy. Based on this, a sono/light dual response strategy to tumor therapy and activation of ICD is proposed. A topological synthesis method is used to obtain sulfur-doped bismuth oxide Bi2 O3-x Sx (BS) using BiF3 (BF) as a template through reduction and a morphology-controllable bismuth-based nano-semiconductor with a narrow bandgap is constructed. Under the stimulation of ultrasound, BS can produce reactive oxygen species (ROS) through the sonocatalytic process, which cooperates with BS to consume glutathione and enhance cellular oxidative damage, further inducing ICD. Due to the introduction of sulfur in the reduction reaction, BS can achieve photothermal conversion under light, and combine with ROS to treat tumors. Further, with the assistance of ivermectin (IVM) to form composite (BSM), combined with sono/light dual strategy, ICD is promoted and DCs maturation is accelerated. The proposed ICD-mediated hyperthermia/sonocatalytic therapy strategy will pay the way for synergetic enhancement of tumor treatment efficacy and provide a feasible idea for controllable induction of ICD.

Light-Elicited and Oxygen-Saved Iridium Nanocapsule for Oxidative Damage Intensified Oncotherapy.

Regulating redox homeostasis in tumor cells and exploiting oxidative stress to damage tumors is an efficacious strategy for cancer therapy. However, the strengths of organic nanomaterials within this strategy are often ignored. In this work, a light-triggered reactive oxygen species (ROS) damaging nanoamplifier (IrP-T) was developed for enhanced photodynamic therapy (PDT). The IrP-T was fabricated with an amphiphilic iridium complex and a MTH1 inhibitor (TH287). Under green light stimulation, IrP-T catalyzed the oxygen in cells to generate ROS for realizing oxidative damage; meanwhile, TH287 increased the accumulation of 8-oxo-dGTP, further strengthening oxidative stress and inducing cell death. IrP-T could maximize the use of a small amount of oxygen, thus further boosting the efficacy of PDT in hypoxic tumors. The construction of nanocapsules provided a valuable therapeutic strategy for oxidative damage and synergizing PDT.

A Novel Strategy for Rapid Fluorescence Detection of FluB and SARS-CoV-2.

Undoubtedly, SARS-CoV-2 has caused an outbreak of pneumonia that evolved into a worldwide pandemic. The confusion of early symptoms of the SARS-CoV-2 infection with other respiratory virus infections made it very difficult to block its spread, leading to the expansion of the outbreak and an unreasonable demand for medical resource allocation. The traditional immunochromatographic test strip (ICTS) can detect one analyte with one sample. Herein, this study presents a novel strategy for the simultaneous rapid detection of FluB/SARS-CoV-2, including quantum dot fluorescent microspheres (QDFM) ICTS and a supporting device. The ICTS could be applied to realize simultaneous detection of FluB and SARS-CoV-2 with one test in a short time. A device supporting FluB/SARS-CoV-2 QDFM ICTS was designed and had the characteristics of being safe, portable, low-cost, relatively stable, and easy to use, ensuring the device could replace the immunofluorescence analyzer in cases where there is no need for quantification. This device does not need to be operated by professional and technical personnel and has commercial application potential.

Effect of Tendon Stem Cells in Chitosan/ß-Glycerophosphate/Collagen Hydrogel on Achilles Tendon Healing in a Rat Model.

BACKGROUND The aim of this study was to determine whether the local application of tendon stem cells (TSCs) with chitosan/ß-glycerophosphate/collagen(C/GP/Co) hydrogel promotes healing after an acute Achilles tendon injury in a rat model. MATERIAL AND METHODS Ninety-six Sprague-Dawley (SD) rats were used to make an Achilles tendon defect model, then the animals were randomly divided into 4 groups consisting of 8 rats each: control group, hydrogel group, TSCs group, and TSCs with hydrogel group. At 2, 4, and 6 weeks after treatment, tendon samples were harvested, and the quality of tendon repair was evaluated based on histology, immunohistochemistry, and biomechanical properties. RESULTS Combining TSCs with C/GP/Co hydrogel significantly enhances tendon healing compared with the control, hydrogel, and TSCs groups. The improved healing was indicated by the improvement in histological and immunohistochemistry outcomes and the increase in the biomechanical properties of the regenerated tissue at both 4 and 6 weeks post-injury. CONCLUSIONS This study demonstrates that the transplantation of TSCs combined with C/GP/Co hydrogel significantly improved the histological, immunohistochemistry, and biomechanical outcomes of the regenerated tissue at 4 and 6 weeks after implantation. TSCs with C/GP/Co hydrogel is a potentially effective treatment for tendon injury.

Determination of 3-nitropropionic acid in sugarcane using dispersive solid-phase extraction and gas chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry.

A method for accurately determining 3-nitropropionic acid in sugarcane was established for the first time using gas chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry (GC - APCI-MS/MS). Under acidic conditions, 3-nitropropionic acid is methylated to obtain methyl 3-nitropropionate. The derivative product was purified using dispersive solid-phase extraction (d-SPE) method and analyzed using GC - APCI-MS/MS. The recovery experiments were conducted at three concentrations: low, medium, and high. The recovery rates ranged from 75.1% to 90.2%, the relative standard deviations were <8.2%, and the limit of quantification was 2.0 µg/kg. The method offers the advantage of being accurate, sensitive, and specific, meeting the requirements of the determination of 3-nitropropionic acid in sugarcane.

A low-cost and portable fluorometer based on an optical pick-up unit for chlorophyll-a detection.

Chlorophyll-a (Chl-a) fluorescence detection is an important technique for monitoring water quality. In this work, we proposed an approach that employs the mass-produced low-cost optical pick-up unit (OPU) extracted from the high-definition digital versatile disc (HD-DVD) drive as the key optical component for our chlorophyll-a fluorometer. The built-in blue-violet 405 nm laser diode of the OPU acts as the excitation light to perform laser-induced fluorescence (LIF). The laser driver and a series of intrinsic lenses within the OPU, such as an objective lens with a numerical aperture (NA) of 0.65 and a collimating lens, help reduce the size, cost, and system complexity of the fluorometer. By integrating off-the-shelf electronic components, miniaturized optical setups, and 3D-printed assemblies, we have developed a low-cost, easy-to-make, standalone, and portable fluorometer. Finally, we validated the performance of the device for chlorophyll-a fluorescence detection under laboratory and on-site conditions, which demonstrated its great potential in water monitoring applications. The limit of detection (LOD) for chlorophyll-a is 0.35 µg/L, the size of the device is 151 × 100 × 80 mm3, and the total cost of the proposed fluorometer is as low as 137.5 USD. © 2023 Elsevier Science. All rights reserved.

Air-Liquid Interface Microfluidic Monitoring Sensor Platform for Studying Autophagy Regulation after PM2.5 Exposure.

Undoubtedly, a deep understanding of PM2.5-induced tumor metastasis at the molecular level can contribute to improving the therapeutic effects of related diseases. However, the underlying molecular mechanism of fine particle exposure through long noncoding RNA (lncRNA) regulation in autophagy and, ultimately, lung cancer (LC) metastasis remains elusive; on the other hand, the related monitoring sensor platform used to investigate autophagy and cell migration is lacking. Herein, this study performed an air-liquid interface microfluidic monitoring sensor (AIMMS) platform to analyze human bronchial epithelial cells after PM2.5 stimulation. The multiomics analysis [RNA sequencing (RNA-seq) on lncRNA and mRNA expressions separately] showed that MALAT1 was highly expressed in the PM2.5 treatment group. Furthermore, RNA-seq analysis demonstrated that autophagy-related pathways were activated. Notably, the main mRNAs associated with autophagy regulation, including ATG4D, ATG12, ATG7, and ATG3, were upregulated. Inhibition or downregulation of MALAT1 inhibited autophagy via the ATG4D/ATG12/ATG7/ATG3 pathway after PM2.5 exposure and ultimately suppressed LC metastasis. Thus, based on the AIMMS platform, we found that MALAT1 might become a promising therapeutic target. Furthermore, this low-cost AIMMS system as a fluorescence sensor integrated with the cell-monitor module could be employed to study LC migration after PM2.5 exposure. With the fluorescence cell-monitoring module, the platform could be used to observe the migration of LC cells and construct the tumor metastasis model. In the future, several fluorescence probes, including nanoprobes, could be used in the AIMMS platform to investigate many other biological processes, especially cell interaction and migration, in the fields of toxicology and pharmacology.

One-step time-resolved cascade logic gate microfluidic chip for home testing of SARS-CoV-2 and flu B.

Home testing technology strategy is critical for early screening of disease. However, current home testing technologies often require complex processes, which limits their application. In this study, a time-resolved cascade logic gate microfluidic chip (TCLMC) was revealed to enable capillary force-based one-step operation without manual intervention or professional equipment. By analogy with logic gates in the circuit, TCLMC could automatically control the fluid flow and regulate the incubation time to optimize the immunoassay. The limit of detection of TCLMC for SARS-CoV-2 and influenza B virus (Flu B) was 134.94 and 79.17 pg mL-1 within 10 min. Additionally, this study tested saliva samples from 12 Flu B patients and 24 healthy controls to verify its clinical application. The results showed that TCLMC had high sensitivity (100%), specificity (100%), and accuracy (100%). This study provides a new one-step strategy for home testing and demonstrates its great potential in the diagnosis field.

Cytotoxicity Effect of Iron Oxide (Fe3O4)/Graphene Oxide (GO) Nanosheets in Cultured HBE Cells.

Iron oxide (Fe3O4), a classical magnetic material, has been widely utilized in the field of biological magnetic resonance imaging Graphene oxide (GO) has also been extensively applied as a drug carrier due to its high specific surface area and other properties. Recently, numerous studies have synthesized Fe3O4/GO nanomaterials for biological diagnosis and treatments, including photothermal therapy and magnetic thermal therapy. However, the biosafety of the synthesized Fe3O4/GO nanomaterials still needs to be further identified. Therefore, this research intended to ascertain the cytotoxicity of Fe3O4/GO after treatment with different conditions in HBE cells. The results indicated the time-dependent and concentration-dependent cytotoxicity of Fe3O4/GO. Meanwhile, exposure to Fe3O4/GO nanomaterials increased reactive oxygen species (ROS) levels, calcium ions levels, and oxidative stress in mitochondria produced by these nanomaterials activated Caspase-9 and Caspase-3, ultimately leading to cell apoptosis.

An Oxygen-Concentration-Controllable Multiorgan Microfluidic Platform for Studying Hypoxia-Induced Lung Cancer-Liver Metastasis and Screening Drugs.

Various cancer metastasis models based on organ-on-a-chip platforms have been established to study molecular mechanisms and screen drugs. However, current platforms can neither reveal hypoxia-induced cancer metastasis mechanisms nor allow drug screening under a hypoxia environment on a multiorgan level. We have developed a three-dimensional-culture multiorgan microfluidic (3D-CMOM) platform in which the dissolved oxygen concentration can be precisely controlled. An organ-level lung cancer and liver linkage model was established under normoxic/hypoxic conditions. A transcriptomics analysis of the hypoxia-induced lung cancer cells (A549 cells) on the platform indicated that the hypoxia-inducible factor 1α (HIF-1α) pathway could elevate epithelial-mesenchymal transition (EMT) transcription factors (Snail 1 and Snail 2), which could promote cancer metastasis. Then, protein detection demonstrated that HIF-1α and EMT transcription factor expression levels were positively correlated with the secretion of cancer metastasis damage factors alpha-fetoprotein (AFP), alkaline phosphatase (ALP), and gamma-glutamyl transpeptidase (γ-GT) from liver cells. Furthermore, the cancer treatment effects of HIF-1α inhibitors (tirapazamine, SYP-5, and IDF-11774) were evaluated using the platform. The treatment effect of SYP-5 was enhanced under the hypoxic conditions with fewer side effects, similar to the findings of TPZ. We can envision its wide application in future investigations of cancer metastasis and screening of drugs under hypoxic conditions with the potential to replace animal experiments.

EGFR inhibitors regulate Ca2+ concentration and apoptosis after PM2.5 exposure based on a lung-mimic microfluidic system.

Air pollution has side effects on human health. Epidemiology studies indicate a positive association between ambient fine particle (PM2.5, or particles less than 2.5 µm in diameter) concentration and lung cancer. However, how fine particles affect lung cancer at the molecular level and related therapeutic methods to address these diseases are unclear. Here, the multi-omics analysis (DNA methylation and transcriptomic) was used to detect human bronchial epithelial cells (HBE), that were exposed to PM2.5 using a quantified, small, portable, and organ-level air-liquid interface microfluidic system that mimics lung functions. The results indicate that 36,838 differentially methylated genes were detected. Of these 33,796 genes were hypomethylated (beta < 0), and 2862 genes were hypermethylated (beta > 0). RNA-Seq analysis demonstrated that 19,489 genes were upregulated (log2FC > 0), and 16,659 were downregulated. Furthermore, the calcium and apoptosis pathways were activated according to multi-omics analysis. The change in EGFR gene expression after PM2.5 exposure was the result of alterations of the cellular DNA methylome in the promoter. Inhibition or down-regulation of EGFR could result in the regulation of the downstream intracellular Ca2+ concentration and apoptosis via the EGFR/PLCγ and EGFR/STAT/Bcl-XL pathways after PM2.5 exposure. EGFR inhibitors decrease the Ca2+ concentration of cells, thereby strengthening the effects of fine particles on apoptosis. In short, the Ca2+ concentration and the apoptosis of cells can be regulated via EGFR related pathway after PM2.5 exposure. The EGFR may be a potentially promising therapeutic target for the treatment of air pollution-induced lung cancer through regulation of the intracellular Ca2+ concentration and apoptosis.

Initial stability and stress distribution of ankle arthroscopic arthrodesis with three kinds of 2-screw configuration fixation: a finite element analysis.

BACKGROUND: Arthroscopic ankle arthrodesis (AAA) is recognized as the standard treatment for the end-stage ankle arthritis. Two-screw configuration fixation is a typical technique for AAA; however, no consensus has been reached on how to select most suitable inserted position and direction. For better joint reduction, we developed a new configuration (2 home run-screw configuration: 2 screws are inserted from the lateral-posterior and medial-posterior malleolus into the talar neck) and investigated whether it turned out to be better than the other commonly used 2-screw configurations. METHODS: In this study, we investigated three kinds of 2-screw configurations: 2 "home run"-screw configuration (group A), crossed transverse configuration (the screw is inserted from the medial malleolus into the anterior talus and the other from the lateral tibia maintains posterior talus, group B), and 2 parallel screw configuration (2 parallel screws are inserted from the posteromedial side of the tibia into talus, group C). The effects of the above three insertions on the loading stress of the tibio-talar joint were comparatively analyzed with a three-dimensional finite element model. RESULTS: Group A was better than groups B and C in respect of stress distribution uniformity and superior to both groups B and C in anti-flexion strength and anti-internal rotation strength. Group A was slightly worse than group C but better than group B in anti-dorsiflexion and anti-valgus and varus strength. CONCLUSIONS: Two "home run"-screw configuration facilitates the reduction of anterior talus dislocation of end-stage ankle arthritis. Our finite element analysis demonstrates the configuration is superior to crossed transverse and parallel configuration for arthroscopic ankle arthrodesis in terms of stress distribution and initial stability.

[Effect of cyclic stretch on expression of c-fos gene in rat Achilles-derived tendon stem cells].

Objective: To investigate whether mechanical stretch stimulation affects the expression of the immediate early gene c-fos mRNA in rat Achilles-derived tendon stem cells (TSCs) in vitro. Methods: TSCs were isolated from the Achilles tendons of 8 weeks old male Sprague Dawley rats by enzymatic digestion method and cultured for 3 passages. The TSCs were stimulated by a uniaxial cyclic stretching loading system under the condition of 1 Hz, respectively with 4% or 8% stretch intensity for 0, 5, 15, 30, 60, and 120 minutes. At each time point, TSCs were collected to detect c-fos mRNA expressions and to find the best time-point T max by real-time fluorescence quantitative PCR. Then, TSCs were simulated with 2%, 4%, 6%, 8%, or 12% stretch intensity for T max to observe the relative expressions of c-fos mRNA under different stretch intensities. Next, TSCs were stretched for 0, 5, or 15 minutes respectively and followed by incubation at relax status up to T max to observe the changes of c-fos mRNA expressions after short period stimulation. Finally, TSCs were stimulated with 4% or 8% stretch intensity respectively for 0, T max, or 120 minutes to detect the expressions of the tenogenic differentiation related genes [collagen type I, tenomodulin (TNMD)], the osteogenic differentiation related genes [runt related transcription factor 2 (Runx2), distal-less homeobox 5 (Dlx5)], and the adipogenic differentiation related gene [fatty acid binding protein 4 (FABP4)]. Results: Under 4% or 8% stretch intensity, the relative expressions of c-fos mRNA significantly increased at 15 minutes ( P<0.05), reached the maximum at 30 minutes ( P<0.05), and returned to baseline at 60 minutes ( P>0.05) when compared with expression at 0 minute. Therefore, T max was 30 minutes. The stretch intensity of 2% was enough to cause the expression of c-fos mRNA at 30 minutes, and the expression was significantly higher under the stretch intensity of 6%, 8%, and 12% than 2% and 4% ( P<0.05). Even for a short period stimulation of 5 minutes, c-fos mRNA expression could still significantly increase at 30 minutes ( P<0.05). The relative expressions of differentiation related genes at 30 and 120 minutes showed no significant difference when compared with the expression at 0 minute under 4% stretch intensity ( P>0.05); but the relative expression of Runx2 gene significantly increased at 30 minutes, and the relative expressions of collagen type I, TNMD, Dlx5, and Runx2 increased at 120 minutes under 8% stretch intensity ( P<0.05). Conclusion: Mechanical stretch stimulation can affect the relative expression of the immediate early gene c-fos mRNA of rat Achilles-derived tendon stem cells in vitro, and there is time- and intensity-dependence. It is suggested that the mechanical stimulation with different time or intensity may affect the differentiation of TSCs at early stage. This study is meaningful for the further study on TSCs intracellular mechanical signal transfer mechanism.

[Effect of different intensity treadmill training on repair of micro-injured Achilles tendon in rats].

Objective: To explore the effect of different intensity treadmill training on the repair of micro-injured Achilles tendon induced by collagenase in rats. Methods: Seventy-two 8-week-old male Sprague Dawley rats (weighing, 200-250 g) were selected. After adaptive treadmill training for 1 week, rats were injected with 30 µL type I collagenase solution (10 mg/mL) into both Achilles tendons to make micro-injured Achilles tendon models. After 1 week of cage feeding, the rats were randomly divided into 3 groups: the control group, the low-intensity group, and the high-intensity group, 24 rats each group. The rats in control group could move freely, and the rats underwent daily treadmill training at the intensity of 13 m/min and 20 min/d in the low-intensity group and at the intensity of 17 m/min and 60 min/d in the high-intensity group. At immediate, 1 week, and 4 weeks after training, bilateral Achilles tendons were collected from 8 rats of each group for gross observation, histological analysis, and mechanical testing. Results: At immediate after training, there was no significant difference in the gross observation, histological observation, and biomechanical properties of the Achilles tendon between groups ( P>0.05). The gross observation showed connective tissue hyperplasia near Achilles tendon and lackluster tendon in each group at 1 week; hyperplasia significantly reduced in the low-intensity group when compared with the control group, and there were more connective tissue and a large number of neovascularization in the high-intensity group at 4 weeks. At 1 week, there was no significant difference in the semi-quantitative histological total score between groups ( P>0.05), but there were significant differences in vascularity between low-intensity group or high-intensity group and control group ( P<0.05). At 4 weeks, the semi-quantitative histological total score was significantly higher in high-intensity group than control group and low-intensity group ( P<0.05), and in control group than low-intensity group ( P<0.05). There were significant differences in collagen arrangement, cell morphology, abnormal cells, and vascularity between low-intensity group and high-intensity group or control group ( P<0.05). And there was significant difference in abnormal cells between high-intensity group and control group ( P<0.05). The mechanical testing showed that there was no significant difference in cross-sectional area of the Achilles tendon, the ultimate force, tensile strength, and elastic modulus between groups at 1 week ( P>0.05); the low-intensity group was significantly higher than the control group in the ultimate force and the tensile strength ( P<0.05), and than high-intensity group in the ultimate force and elastic modulus ( P<0.05), but no significant difference was found in the other indexes between groups ( P>0.05) at 4 weeks. Conclusion: Low-intensity treadmill training can promote the repair of rat micro-injured Achilles tendon induced by collagenase.

Individual headless compression screws fixed with three-dimensional image processing technology improves fusion rates of isolated talonavicular arthrodesis.

BACKGROUND: Screw fixation is a typical technique for isolated talonavicular arthrodesis (TNA), however, no consensus has been reached on how to select most suitable inserted position and direction. The study aimed to present a new fixation technique and to evaluate the clinical outcome of individual headless compression screws (HCSs) applied with three-dimensional (3D) image processing technology to isolated TNA. METHODS: From 2007 to 2014, 69 patients underwent isolated TNA by using double Acutrak HCSs. The preoperative three-dimensional (3D) insertion model of double HCSs was applied by Mimics, Catia, and SolidWorks reconstruction software. One HCS oriented antegradely from the edge of dorsal navicular tail where intersected interspace between the first and the second cuneiform into the talus body along the talus axis, and the other one paralleled the first screw oriented from the dorsal-medial navicular where intersected at the medial plane of the first cuneiform. The anteroposterior and lateral X-ray examinations certified that the double HCSs were placed along the longitudinal axis of the talus. Postoperative assessment included the American Orthopaedic Foot & Ankle Society hindfoot (AOFAS), the visual analogue scale (VAS) score, satisfaction score, imaging assessments, and complications. RESULTS: At the mean 44-months follow-up, all patients exhibited good articular congruity and solid bone fusion at an average of 11.26 ± 0.85 weeks (range, 10 ~ 13 weeks) without screw loosening, shifting, or breakage. The overall fusion rates were 100%. The average AOFAS score increased from 46.62 ± 4.6 (range, 37 ~ 56) preoperatively to 74.77 ± 5.4 (range, 64-88) at the final follow-up (95% CI: -30.86 ~ -27.34; p < 0.001). The mean VAS score decreased from 7.01 ± 1.2 (range, 4 ~ 9) to 1.93 ± 1.3 (range, 0 ~ 4) (95% CI: 4.69 ~ 5.48; p < 0.001). One cases (1.45%) and three cases (4.35%) experienced wound infection and adjacent arthritis respectively. The postoperative satisfaction score including pain relief, activities of daily living, and return to recreational activities were good to excellent in 62 (89.9%) cases. CONCLUSIONS: Individual 3D reconstruction of HCSs insertion model can be designed with three-dimensional image processing technology in TNA. The technology is safe, effective, and reliable to isolated TNA method with high bone fusion rates, low incidences of complications.

Effect of different intensity pulsed ultrasound on the restoration of rat skeletal muscle contusion.

Muscle damage is a common form of injury. The incidence of muscle damage accounts for up to half of the sports injuries. The aim of this study was to investigate the effect of pulsed ultrasound on the healing process in an animal contusion injury model. SD rats (62) were randomly divided into control group (CG, 14 rats) and treatment group (48). According to the intensities of Ultrasound therapy, the treatment group was divided into 4 subgroups of 12 rats, each: A (0.25 W/cm(2), US(1)), B (0.5 W/cm(2), US(2)), C (0.75 W/cm(2), US(3)) and D (0.25 W/cm(2)). The effectiveness of ultrasound treatment on muscle injuries was evaluated, and the optimal intensity of ultrasound in treating muscle injuries was explored. The results obtained provide experimental and theoretical evidence for the clinical effectiveness of Ultrasound therapy in treating muscle injuries.