RESUMO
The rational design of an oxygen electrocatalyst with low cost and high activity is greatly desired for realization of the practical water-splitting industry. Herein, we put forward a rational method to construct nonprecious-metal catalysts with high activity by designing the microstructure and modulating the electronic state. Iron (Fe)-doped Ni2P hollow polyhedrons decorated with nitrogen-doped carbon (Fe-Ni2P/NC HPs) are prepared by a sequential metal-organic-framework-templated strategy. Benefiting from the strong electronic coupling, rapid charge-transfer capability, and abundant catalytic active sites, the obtained Fe-Ni2P/NC HPs exhibit an impressive electrocatalytic performance toward the oxygen evolution reaction (OER) with an ultralow overpotential of 228 mV at a current density of 10 mA cm-2 and a small Tafel slope of 33.4 mV dec-1, superior to the commercial RuO2 and most reported electrocatalysts. Notably, this catalyst also shows long durability with an almost negligible activity decay over 210 h for the OER. Combining density functional theory calculations with experiments demonstrates that the doped Fe and the incorporated carbon effectively modulate the electronic structure, enhance the conductivity, and greatly reduce the energy barrier of the rate-determining step in the process of OER. Thus, fast OER kinetics is realized. Moreover, this synthetic strategy can be extended to the synthesis of Fe-NiS2/NC HPs and Fe-NiSe2/NC HPs with excellent OER performance and long-term durability. This work furnishes an instructive idea in pursuit of nonprecious-metal materials with robust electrocatalytic activity and long durability.
RESUMO
Formic acid (HCOOH, FA) is emerging as an appealing carrier for hydrogen storage owing to its renewability, a high volumetric capacity of 53 g H2/L, and convenient storage/transportation as a liquid. It is highly desired but still a challenge to search highly efficient catalysts to realize hydrogen evolution from FA. Here, monodispersed and ultrasmall Pd-La(OH)3 nanoparticles (NPs) anchored on amine-functionalized N-doped porous carbon bowl (N-PCB-NH2) substrates have been fabricated through a facile wet chemistry approach. As a result of the ultrafine size of Pd-La(OH)3 NPs (1.6 nm), the deprotonation ability of La(OH)3 and amine groups, and the strong metal-support interaction between Pd-La(OH)3 and N-PCB-NH2, the as-prepared Pd-La(OH)3/N-PCB-NH2 catalyst exhibits 100% H2 selectivity and exceptional catalytic property with a high turnover frequency value up to 9585 h-1 for FA dehydrogenation at 323 K, which is superior to most of the heterogeneous catalysts ever reported. Kinetic isotope effect measurements demonstrate that the C-H bond cleavage is a rate-determining step in the FA dehydrogenation reaction as compared to the O-H bond dissociation. This work presents a feasible approach to synthesize supported ultrafine metal NP catalysts with porous bowl structures for H2 generation from FA.
RESUMO
Designing highly efficient catalysts for use in fuel production is a highly attractive research area but still remains challenging. Herein, for the first time, ultrafine Ni nanoparticles (NPs) self-assembled on ceria nanowires (NWs) and then embedded in a microporous silica shell (denoted as Ni-CeO2@SiO2) are successfully designed and synthesized via a one-pot facile strategy. The average diameter of Ni-CeO2 NWs is just 2.9 nm, and the length is up to 102.7 nm. The resulting Ni-CeO2@SiO2 exhibits high performance and 100% hydrogen selectivity for H2 production from N2H4 and N2H4BH3 in aqueous solution. Unexpectedly, Ni-CeO2@SiO2 also has good catalytic performance and thermal stability for CO2 methanation. The high catalytic performance of Ni-CeO2@SiO2 can be attributed to the synergistic electronic effect and strong interaction between Ni NPs and CeO2 NWs with plenty of oxygen vacancies, as well as the unique structure effect. As an effective strategy, the present work provides an opportunity to embed ultrafine metal NPs-CeO2 NWs into a microporous silica shell, which has broad application prospects in various catalytic fields.
RESUMO
The catalytic dehydrogenation of hydrazine borane (N2H4BH3) and hydrous hydrazine (N2H4·H2O) for H2 evolution is considered as two of the pivotal reactions for the implementation of the hydrogen-based economy. A reduction rate controlled strategy is successfully applied for the encapsulating of uniform tiny NiPt alloy nanoclusters within the opening porous channels of MOFs in this work. The resultant Ni0.9Pt0.1/MOF core-shell composite with a low Pt content exerted exceedingly high activity and durability for complete H2 evolution (100% hydrogen selectivity) from alkaline N2H4BH3 and N2H4·H2O solution. The features of small NiPt alloy NPs, strong synergistic effect between NiPt alloy NPs and the MOF, and open pore structure for freely mass transfer made NiPt/MIL-101 an excellent catalyst for highly efficient H2 evolution from N2H4BH3 or N2H4·H2O.
RESUMO
The development of low-cost and high-efficiency catalysts for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) is still a challenging technology. Herein, ultrafine MoOx-doped Ni nanoparticles (~3.0â nm) were anchored on g-C3N4@glucose-derived nitrogen-doped carbon nanosheets via a phosphate-mediated method. The strong adsorption of phosphate-mediated nitrogen-doped carbon nanosheets (PNCS) for metal ions is a key factor for the preparation of ultrasmall Ni nanoparticles (NPs). Notably, the alkaline environment formed by the reduction of metal ions removes the phosphate from the PNCS surface to generate P-free (P)NCS so that the phosphate does not participate in the subsequent catalytic reaction. The synthesized Ni-MoOx/(P)NCS catalysts exhibited outstanding catalytic properties for the hydrolysis of AB, with a high turnover frequency (TOF) value of up to 85.7â min-1, comparable to the most efficient noble-metal-free catalysts and commercial Pt/C catalyst ever reported for catalytic hydrogen production from AB hydrolysis. The superior performance of Ni-MoOx/(P)NCS can be ascribed to its well-dispersed ultrafine metal NPs, abundant surface basic sites, and electron-rich nickel species induced by strong electronic interactions between Ni-MoOx and (P)NCS. The strategy of combining multiple modification measures adopted in this study provides new insights into the development of economical and high-efficiency noble-metal-free catalysts for energy catalysis applications.
RESUMO
Formic acid (FA), a high-value product of CO2 hydrogenation and biomass conversion, is considered a promising liquid organic hydrogen carrier for its high hydrogen content, easy accessibility, and relative stability. The development of an efficient heterogeneous catalyst toward FA dehydrogenation and Cr(VI) reduction by FA is needed to boost its sluggish kinetics but still remains a challenge. Herein, uniformly dispersed subnanometric PdAu alloy clusters (i.e., 0.9 nm) were successfully prepared and confined by amine-functionalized carbon bowls (ACB). By virtue of the tiny size and abundant active sites of PdAu clusters, the promotional effect of surface amine groups, and electronic interaction between subnanometric PdAu clusters and support, this as-prepared PdAu/ACB catalyst exhibits superior catalytic property for additive-free FA dehydrogenation (turnover frequency, 10597 h-1 at 323 K) and Cr(VI) reduction (rate constant, 0.47 min-1 at 298 K) under mild conditions, higher than most of the catalysts reported so far. This study offers insight into the design of efficient and durable catalysts for various catalytic applications in energy and environment.
RESUMO
Bimetallic CoPt alloy nanoparticles (NPs) immobilized on CeO2 nanorods (CoPt/CeO2) were synthesized by a facile wet-chemistry reduction method, which showed the highest catalytic efficiency reported to date for the complete dehydrogenation of hydrazine borane with a high TOF value of up to 5454 h-1 at 323 K.
RESUMO
Hydrogen (H2), a regenerable and promising energy carrier, acts as an essential role in the construction of a sustainable energy system. Formic acid (HCOOH, FA), a natural biological metabolic products and also accessible through carbon dioxide (CO2) reduction, has a great potential to serve as a prospective H2 supplier for the fuel cell. Herein, ultrafine and electron-rich IrPdAu alloy nanoparticles with a size of 1.4 nm are highly dispersed on amine-modified mesoporous SiO2 (NH2-SBA-15) and used as a highly active and selective catalyst for fast H2 production from FA. The as-synthesized IrPdAu/NH2-SBA-15 possesses superior catalytic activity and 100% H2 selectivity with initial turnover frequency values of 6316 h-1 with the additive of sodium formate (SF) and 4737 h-1 even without SF at 298 K, comparable to the most effective heterogeneous catalysts ever published. The excellent performance of IrPdAu/NH2-SBA-15 was not only ascribed to the combination of the electronic synergistic effect of trimetallic alloys and the strong metal-support interaction effect but also attributed to the amine (-NH2) alkaline groups grafted on SBA-15, which is beneficial to boost the split of the O-H bond of FA.
RESUMO
Highly dispersed Pt-CeO2 hybrids arched on reduced graphene oxide (Pt-CeO2 /rGO) were facilely synthesized by a combination of the reverse micelle technique and a redox reaction without any additional reductant or surfactant. Under a N2 atmosphere, the redox reaction between Ce3+ and Pt2+ occurs automatically in alkaline solution, which results in the formation of Pt-CeO2 /rGO nanocomposites (NCs). The as-synthesized Pt-CeO2 /rGO NCs exhibit superior catalytic performance relative to that shown by the free Pt nanoparticles, Pt/rGO, Pt-CeO2 hybrid, and the physical mixture of Pt-CeO2 and rGO; furthermore, the nanocomposites show significantly better activity than the commercial Pt/C catalyst toward the hydrolysis of ammonia borane (NH3 BH3 ) at room temperature. Moreover, the Pt-CeO2 /rGO NCs have remarkable stability, and 92 % of their initial catalytic activity is preserved even after 10â runs. The excellent activity of the Pt-CeO2 /rGO NCs can be attributed not only to the synergistic structure but also to the electronic effects of the Pt-CeO2 /rGO NCs among Pt, CeO2 , and rGO.
RESUMO
Ultrafine ruthenium nanoparticles (NPs) within the mesopores of the SBA-15 have been successfully prepared by using a "double solvents" method, in which n-hexane is used as a hydrophobic solvent and RuCl3 aqueous solution is used as a hydrophilic solvent. After the impregnation and reduction processes, the samples were characterized by XRD, TEM, EDX, XPS, N2 adsorption-desorption, and ICP techniques. The TEM images show that small sized Ru NPs with an average size of 3.0 ± 0.8 nm are uniformly dispersed in the mesopores of SBA-15. The as-synthesized Ru@SBA-15 nanocomposites (NCs) display exceptional catalytic activity for hydrogen generation by the hydrolysis of ammonia borane (NH3BH3, AB) and hydrazine borane (N2H4BH3, HB) at room temperature with the turnover frequency (TOF) value of 316 and 706 mol H2 (mol Ru min)(-1), respectively, relatively high values reported so far for the same reaction. The activation energies (Ea) for the hydrolysis of AB and HB catalyzed by Ru@SBA-15 NCs are measured to be 34.8 ± 2 and 41.3 ± 2 kJ mol(-1), respectively. Moreover, Ru@SBA-15 NCs also show satisfied durable stability for the hydrolytic dehydrogenation of AB and HB, respectively.
RESUMO
Diverse mesoporous CuO nanostructures have been prepared by a facile and scaleable wet-chemical method and reduced to mesoporous Cu nanostructures by using the reductant ammonia borane (AB). These mesoporous Cu nanostructures have been applied as a catalyst for hydrogen generation from the methanolysis of AB. The catalytic results show that the reaction rate and the amount of hydrogen evolution significantly relied on their morphologies. Compared with the nanosheet-like, bundle-like and dandelion-like Cu, the flower-like Cu nanostructures exhibit the highest catalytic activity with a total turnover frequency (TOF) value of 2.41 mol H2 mol catalyst(-1) min(-1) and a low activation energy value of 34.2 ± 1.2 kJ mol(-1) at room temperature. Furthermore, the flower-like Cu nanostructures have also shown excellent activity in recycling tests. The low cost and high performance of Cu nanocatalysts may offer high potential for its practical application in hydrogen generation from the methanolysis of AB.
RESUMO
Ultrafine copper nanoparticles (Cu NPs) within porous silica nanospheres (Cu@SiO2) were prepared via a simple one-pot synthetic route in a reverse micelle system and characterized by SEM, TEM, EDX, XRD, N2 adsorption-desorption, CO-TPD, XPS, and ICP methods. The characterized results show that ultrafine Cu NPs with diameter of around 2 nm are effectively embedded in the center of well-proportioned spherical SiO2 NPs of about 25 nm in diameter. Compared to commercial SiO2 supported Cu NPs, SiO2 nanospheres supported Cu NPs, and free Cu NPs, the synthesized core-shell nanospheres Cu@SiO2 exhibit a superior catalytic activity for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) and hydrazine borane (HB, N2H4BH3) under ambient atmosphere at room temperature. The turnover frequencies (TOF) for the hydrolysis of AB and HB in the presence of Cu@SiO2 nanospheres were measured to be 3.24 and 7.58 mol H2 (mol Cu min)(-1), respectively, relatively high values for Cu nanocatalysts in the same reaction. In addition, the recycle tests show that the Cu@SiO2 nanospheres are still highly active in the hydrolysis of AB and HB, preserving 90 and 85% of their initial catalytic activity even after ten recycles, respectively.