Gate-Tunable Plasmon-Enhanced Photodetection in a Monolayer MoS2 Phototransistor with Ultrahigh Photoresponsivity.

Monolayer transition metal dichalcogenides (TMDs), direct bandgap materials with an atomically thin nature, are promising materials for electronics and photonics, especially at highly scaled lateral dimensions. However, the characteristically low total absorption of photons in the monolayer TMD has become a challenge in the access to and realization of monolayer TMD-based high-performance optoelectronic functionalities and devices. Here, we demonstrate gate-tunable plasmonic phototransistors (photoFETs) that consist of monolayer molybdenum disulfide (MoS2) photoFETs integrated with the two-dimensional plasmonic crystals. The plasmonic photoFET has an ultrahigh photoresponsivity of 2.7 × 104 AW-1, achieving a 7.2-fold enhancement in the photocurrent compared to pristine photoFETs. This benefits predominately from the combination of the enhancement of the photon-absorption-rate via the strongly localized-electromagnetic-field and the gate-tunable plasmon-induced photocarrier-generation-rate in the monolayer MoS2. These results demonstrate a systematic methodology for designing ultrathin plasmon-enhanced photodetectors based on monolayer TMDs for next-generation ultracompact optoelectronic devices in the trans-Moore era.

Demonstration of a Superior Deep-UV Surface-Enhanced Resonance Raman Scattering (SERRS) Substrate and Single-Base Mutation Detection in Oligonucleotides.

In life science, rapid mutation detection in oligonucleotides is in a great demand for genomic and medical screening. To satisfy this demand, surface-enhanced resonance Raman spectroscopy (SERRS) in the deep-UV (DUV) regime offers a promising solution due to its merits of label-free nature, strong electromagnetic confinement, and charge transfer effect. Here, we demonstrate an epitaxial aluminum (Al) DUV-SERRS substrate that resonates effectively with the incident Raman laser and the ss-DNA at 266 nm, yielding significant SERRS signals of the detected analytes. For the first time, to the best of our knowledge, we obtaine SERRS spectra for all bases of oligonucleotides, not only revealing maximum characteristic Raman peaks but also recording the highest enhancement factor of up to 106 for a 1 nm thick adenine monomer. Moreover, our epitaxial Al DUV-SERRS substrate is able to enhance the Raman signal of all four bases of 12-mer ss-DNA and to further linearly quantify the single-base mutation in the 12-mer ss-DNA.

Near-Field Plasmonic Probe with Super Resolution and High Throughput and Signal-to-Noise Ratio.

Near-field scanning optical microscopy (NSOM) enables observation of light-matter interaction with a spatial resolution far below the diffraction limit without the need for a vacuum environment. However, modern NSOM techniques remain subject to a few fundamental restrictions. For example, concerning the aperture tip (a-tip), the throughput is extremely low, and the lateral resolution is poor; both are limited by the aperture size. Meanwhile, with regard to the scattering tip (s-tip), the signal-to-noise ratio (SNR) appears to be almost zero; consequently, one cannot directly use the measured data. In this work, we present a plasmonic tip (p-tip) developed by tailoring subwavelength annuli so as to couple internal radial illumination to surface plasmon polaritons (SPPs), resulting in an ultrastrong, superfocused spot. Our p-tip supports both a radial symmetric SPP excitation and a Fabry-Pérot resonance, and experimental results indicate an optical resolution of 10 nm, a topographic resolution of 10 nm, a throughput of 3.28%, and an outstanding SNR of up to 18.2 (nearly free of background). The demonstrated p-tip outperforms state-of-the-art NSOM tips and can be readily employed in near-field optics, nanolithography, tip-enhanced Raman spectroscopy, and other applications.

Introduction to the Feature Issue on nanophotonics.

This feature issue is a partial collection of contributions from authors who presented their research at the 9th International Conference on Nanophotonics (ICNP 2016) held during March 21-25, 2016 at Academia Sinica, Taipei, Taiwan. ICNP is an independent conference series dedicated to nanophotonics research and applications. This feature issue collects 28 papers related to research presented at ICNP 2016.

Surfactant-directed fabrication of supercrystals from the assembly of polyhedral Au-Pd core-shell nanocrystals and their electrical and optical properties.

Au-Pd core-shell nanocrystals with cubic, truncated cubic, cuboctahedral, truncated octahedral, and octahedral structures have been employed to form micrometer-sized polyhedral supercrystals by both the droplet evaporation method and novel surfactant diffusion methods. Observation of cross-sectional samples indicates shape preservation of interior nanocrystals within a supercrystal. Low-angle X-ray diffraction techniques and electron microscopy have been used to confirm the presence of surfactant between contacting nanocrystals. By diluting the nanocrystal concentration or increasing the solution temperature, supercrystal size can be tuned gradually to well below 1 µm using the surfactant diffusion method. Rectangular supercrystal microbars were obtained by increasing the amounts of cubic nanocrystals and surfactant used. Au-Ag core-shell cubes and PbS cubes with sizes of 30-40 nm have also been fabricated into supercrystals, showing the generality of the surfactant diffusion approach to form supercrystals with diverse composition. Electrical conductivity measurements on single Au-Pd supercrystals reveal loss of metallic conductivity due to the presence of insulating surfactant. Cubic Au-Pd supercrystals show infrared absorption at 3.2 µm due to extensive plasmon coupling. Mie-type resonances centered at 9.8 µm for the Au-Pd supercrystals disappear once the Pd shells are converted into PdH after hydrogen absorption.

Demonstration of an ultrasensitive refractive-index plasmonic sensor by enabling its quadrupole resonance in phase interrogation.

We present an ultrasensitive plasmonic sensing system by introducing a nanostructured X-shaped plasmonic sensor (XPS) and measuring its localized optical properties in phase interrogation. Our tailored XPS exhibits two major resonant modes of a low-order dipole and a high-order quadrupole, between which the quadrupole resonance allows an ultrahigh sensitivity, due to its higher quality factor. Furthermore, we design an in-house common-path phase-interrogation system, in contrast to conventional wavelength-interrogation methods, to achieve greater sensing capability. The experimental measurement shows that the sensing resolution of the XPS reaches 1.15×10(-6) RIU, not only two orders of magnitude greater than the result of the controlled extinction measurement (i.e., 9.90×10(-5) RIU), but also superior than current reported plasmonic sensors.

Genetic algorithms optimization of photonic crystal fibers for half diffraction angle reduction of output beam.

In this work, we optimize the structure of the photonic crystal fibers by using genetic algorithms to provide strong light confinement in fiber and small half diffraction angle of output beam. Furthermore, this article shows the potentials of this study, such as optimizing three purposes at the same time and the arbitrary structure design is achieved. We report two optimized results obtained by different optimization conditions. The results show that the half diffraction angle of the output beam of the photonic crystal fibers can be reduced.

Superior Visible Photoelectric Response with Au/Cu2NiSnS4 Core-Shell Nanocrystals.

The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides in the form of core-shell structures provides a promising approach to enhancing the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS) to achieve an ultrahigh optoelectronic response in the visible regime. The high-quality Au/CNTS core-shell nanocrystals (NCs) were synthesized by developing a unique colloidal hot-injection method, which allowed for excellent control over sizes, shapes, and elemental compositions. The as-synthesized Au/CNTS hybrid core-shell NCs exhibited enhanced optical absorption, carrier extraction efficiency, and improved photosensing performance owing to the plasmonic-induced resonance energy transfer effect of the Au core. This effect led to a significant increase in the carrier density of the Au/CNTS NCs, resulting in a measured responsivity of 1.2 × 103 AW-1, a specific detectivity of 6.2 × 1011 Jones, and an external quantum efficiency of 3.8 × 105 % at an incident power density of 318.5 µW cm-2. These results enlighten a new era in the development of plasmonic core-shell nanostructure-based visible photodetectors.

Inducing transparency with large magnetic response and group indices by hybrid dielectric metamaterials.

We present metamaterial-induced transparency (MIT) phenomena with enhanced magnetic fields in hybrid dielectric metamaterials. Using two hybrid structures of identical-dielectric-constant resonators (IDRs) and distinct-dielectric-constant resonators (DDRs), we demonstrate a larger group index (ng~354), better bandwidth-delay product (BDP~0.9) than metallic-type metamaterials. The keys to enable these properties are to excite either the trapped mode or the suppressed mode resonances, which can be managed by controlling the contrast of dielectric constants between the dielectric resonators in the hybrid metamaterials.

Low-loss and high-symmetry negative refractive index media by hybrid dielectric resonators.

Based on Maxwell's equations and Mie theory, strong sub-wavelength artificial magnetic and electric dipole resonances can be excited within dielectric resonators, and their resonant frequencies can be tailored simply by scaling the size of the dielectric resonators. Therefore, in this work we hybridize commercially available zirconia and alumina structures to harvest their individual artificial magnetic and electric response simultaneously, presenting a negative refractive index medium (NRIM). Comparing with the conventional NRIM constructed by metallic structures, the demonstrated all-dielectric NRIM possesses low-loss and high-symmetry advantages, thus benefiting practical applications in communication components, perfect lenses, invisible cloaking and other novel electromagnetic devices.

Study of optical phase transduction on localized surface plasmon resonance for ultrasensitive detection.

Localized surface plasmon resonance (LSPR) has shown its remarkable applications in biosensing, bioimaging, and nanophotonics. Unlike surface plasmon polariton (SPP), the current studies regarding LSPR as biosensor were restricted in probing the extinction spectra, and thus limit the performance in biosensing and bioimaging. Here, we reveal that optical phase of LSPR provides an acute change at resonance beyond extinction spectra, which permits an ultra-high sensitivity in phase interrogation. We found that optical phases of LSPR show two orders of magnitude higher sensing resolution than extinction spectra among the same nanostructures. For the first time, we demonstrated the feasibility of probing optical phase transduction in LSPR for biosensing, and the sensitivity is superior to not only the extinction spectra among the same metallic nanostructures, but also the LSPR sensors among the current literatures. In summary, the exploitation of LSPR by phase interrogation essentially complements the sensitivity insufficiency of LSPR, and provides new access to understanding and using the rich physics of LSPR.

Ultra-broad and sharp-transition bandpass terahertz filters by hybridizing multiple resonances mode in monolithic metamaterials.

We present three monolithic metamaterial-based THz bandpass filters, the skewed circular slot rings, meandered slots and Jerusalem cross slots, to fit in the THz gap. These THz bandpass filters are comprised of a metal-dielectric-metal (MDM) structure that supports multiple resonances of electric dipole, magnetic dipole, and standing-wave-like modes. By exciting and further hybridizing these individual resonance modes, we demonstrate excellent performance of broad bandwidth and sharp band-edge transition beyond conventional bandpass filters. By further employing our ad hoc Genetic Algorithm (GA) and Periodic Method of Moments (PMM) to optimize our designs, we achieve an ultra-broad 3dB fractional bandwidth and sharp band-edge transition up to 82.2% and 58.3 dB/octave, respectively, benefiting the practical applications such as material recognition in security systems, imaging, and absorbers.

Self-Assembly Anchored Cationic Copolymer Interfaces for Applying the Control of Counterion-Induced Bacteria Killing/Release Procedure.

In recent years, daily hygiene and disease control issues have received increasing attention, especially the raging epidemics caused by the spread of deadly viruses. The construction of the interface of new polymer materials is focused on, which can provide a cyclic operation process for the killing and releasing of bacteria, and perform repeated regeneration, which is of great significance for the development of advanced medical biomaterials. In order to explore the basic physical phenomena of bacterial attachment and detachment on the polymer material interface by different amine groups, this study plans to synthesize four different butyl methacrylate (BMA)-based cationic copolymers with primary, ternary, and quaternary amine groups, and compare their effects on bactericidal efficiency. Since BMA can generate strong hydrophobic interactions with the benzene ring structure, this study used a polystyrene substrate to realize a self-assembled cationic copolymer interface for controlling the counterion-induced bacterial killing/release process. Furthermore, negatively charged ions are introduced to induce changes in the hydration capability of water molecules and control the subsequent bacterial detachment function. In this study, possible directions to answer and clarify the above concepts are proposed, and there is a basic reference principle that can lead to research work in macromolecular bioscience fields.

Hotspots in action: near-infrared light mediated photoelectrochemical oxygen evolution on high index faceted plasmonic gold nanoarchitectures.

Photo-induced electrochemical water splitting is a fascinating approach to overcome the present energy demands as well as environmental issues. To this end, near-infrared (NIR) photocatalysts stand out as promising candidates (where 53% of the solar light is NIR light) to solve the present energy crisis but the lack of NIR-activated photocatalysts has remained a great challenge for decades. Herein, for the first time, we report the synthesis of high-index faceted plasmonic Au nano-branched 12 tip nanostars, which can absorb the whole spectral region of electromagnetic radiation (UV-vis-NIR), for efficient water splitting. Moreover, the plasmonic hot spots on the Au 12 tip nanostars significantly promote the photoelectrochemical oxygen evolution reaction (OER) under NIR light (915 nm) with long-term stability. Remarkably, the Au 12 tip nanostars exhibit 250-fold enhancement of activity under 915 nm laser irradiation and 6.5-fold enhancement of activity under 532 nm laser irradiation, as compared to the Au NPs. Furthermore, the Finite-Difference Time-Domain (FDTD) study confirmed that the significant photoelectrochemical (PEC) enhancement in the NIR light region could be attributed to the hot-electron injection/plasmonic hot spot mechanism upon localized surface plasmonic resonance (LSPR) excitation. Overall, we anticipate that the present work would help to develop new NIR photoelectrocatalysts for meeting future energy demands.

Sensitivity Enhancement and Probiotic Detection of Microfluidic Chips Based on Terahertz Radiation Combined with Metamaterial Technology.

Terahertz (THz) radiation has attracted wide attention in recent years due to its non-destructive properties and ability to sense molecular structures. In applications combining terahertz radiation with metamaterial technology, the interaction between the terahertz radiation and the metamaterials causes resonance reactions; different analytes have different resonance performances in the frequency domain. In addition, a microfluidic system is able to provide low volume reagents for detection, reduce noise from the environment, and concentrate the sample on the detection area. Through simulation, a cruciform metamaterial pattern was designed; the proportion, periodicity, and width of the metamaterial were adjusted to improve the sensing capability of the chip. In the experiments, the sensing capabilities of Type A, B, and C chips were compared. The Type C chip had the most significant resonant effect; its maximum shift could be increased to 89 GHz. In the probiotic experiment, the cruciform chip could have a 0.72 GHz shift at a concentration of 0.025 mg/50 µL, confirming that terahertz radiation combined with a metamaterial microfluidic chip can perform low-concentration detection.

Terahertz Combined with Metamaterial Microfluidic Chip for Troponin Antigen Detection.

In this paper, we use terahertz combined with metamaterial technology as a powerful tool to identify analytes at different concentrations. Combined with the microfluidic chip, the experimental measurement can be performed with a small amount of analyte. In detecting the troponin antigen, surface modification is carried out by biochemical binding. Through the observation of fluorescent antibodies, the average number of fluorescent dots per unit of cruciform metamaterial is 25.60, and then, by adjusting the binding temperature and soaking time, the average number of fluorescent dots per unit of cruciform metamaterial can be increased to 181.02. Through the observation of fluorescent antibodies, it is confirmed that the antibodies can be successfully stabilized on the metamaterial and then bound to the target antigen. The minimum detectable concentration is between 0.05~0.1 µg/100 µL, and the concentration and ΔY show a positive correlation of R2 = 0.9909.

Nanoscale plasmonic wires with maximal figure of merits as a superior flexible transparent conducting electrode for RGB colors.

Based on incredibly increasing applications in modern optoelectronic devices, the demand for securing a superior conductive transparent electrode (TCE) candidate becomes significant and urgent. However, boosting both transmittance and conductance simultaneously is an intrinsic limitation. In this work, we present silver nanoscale plasmonic wires (Ag NPWs) to function as TCEs in the visible light region by lowering their corresponding plasma frequencies. By carefully designing geometric dimensions of the Ag NPWs, we also optimize the performance for red, green, and blue colors, respectively. The demonstrated figure of merits for RGB colors appeared respectively 443.29, 459.46, and 133.78 in simulation and 302.75, 344.11, and 348.02 in experiments. Evidently, our Ag NPWs offer much greater FoMs beyond conventional TCEs that are most frequently comprised of indium tin oxide and show further advantages of flexibility and less Moire effect for the applications of flexible and high-resolution optoelectronic devices.

Convergent charge interval spacing of zwitterionic 4-vinylpyridine carboxybetaine structures for superior blood-inert regulation in amphiphilic phases.

Antifouling materials are indispensable in the biomedical field, but their high hydrophilicity and surface free energy provoke contamination on surfaces under atmospheric conditions, thus limiting their applicability in medical devices. This study proposes a new zwitterionic structure, 4-vinylpyridine carboxybetaine (4VPCB), that results in lower surface free energy and increases biological inertness. In the design of 4VPCB, one to three carbon atoms are inserted between the positive charge and negative charge (carbon space length, CSL) of the pyridyl-containing side chain to adjust hydration with water molecules. The pyridine in the 4VPCB structure provides the hydrophobicity of the zwitterionic functional group, and thus it can have a lower free energy in the gas phase but maintain higher hydrophilicity in the liquid phase environment. Surface plasmon resonance and confocal microscopy were used to analyze the antiprotein adsorption and anti-blood cell adhesion properties of the P4VPCB brush surface. The results showed that the CSL in the P4VPCB structure affected the biological inertness of the surface. The protein adsorption on the surface of P4VPCB2 (CSL= 2) is lower than that on the surfaces of P4VPCB1 (CSL = 1) and P4VPCB3 (CSL = 3), and the optimal resistance to protein adsorption can be reduced to 7.5 ng cm-2. The surface of P4VPCB2 can also exhibit excellent blood-inert function in the adhesion test with various human blood cells, offering a potential possibility for the future design of a new generation of blood-inert medical materials.

Achieving broad absorption band and high incident angles by stochastically-distributed oblique-flat-sheet metamaterial perfect absorbers.

In this work, we integrated a periodic seed layer and oblique deposition method to fabricate a stochastically-distributed oblique-flat-sheet metamaterial perfect absorber (MPA). Such design could increase its absorption bandwidth and tolerance to high angle-incidence due to the fact that various oblique flat sheets offer different resonance conditions while even a single oblique flat sheet could provide different optical paths for resonance. On the other hand, a seed layer could reduce uncertainty regarding to direct oblique deposition and provide abilities to manipulate the bandwidth of the MPA. We also setup a simulation model in the aids of Visual Basic Application and examined the absorption behavior of the MPA under TM and TE oblique incidence that could achieve high absorbance under 80° and 60° incidence, respectively. Finally, in measurement, the fabricated sample owns 65% absorbance within 80-250 THz and over 90% absorbance within 250-320 THz at x-polarization normal incidence; as for the y-polarization normal incidence, we could achieve overall 70% absorbance within 80-300 THz. The measured results reveal similar tendency compared to the simulated ones.

Ultra-broadband, lithography-free, omnidirectional, and polarization-insensitive perfect absorber.

Perfect absorbers (PAs) at near infrared allow various applications such as biosensors, nonlinear optics, color filters, thermal emitters and so on. These PAs, enabled by plasmonic resonance, are typically powerful and compact, but confront inherent challenges of narrow bandwidth, polarization dependence, and limited incident angles as well as requires using expensive lithographic process, which limit their practical applications and mass production. In this work, we demonstrate a non-resonant PA that is comprised of six continuous layers of magnesium fluoride (MgF2) and chromium (Cr) in turns. Our device absorbs more than 90% of light in a broad range of 900-1900 nm. In addition, such a planar design is lithography-free, certainly independent with polarization, and presents a further advantage of wide incidence up to 70°. The measured performance of our optimized PA agrees well with analytical calculations of transfer matrix method (TMM) and numerical simulations of finite element method, and can be readily implemented for practical applications.