Pulsed terahertz spectroscopy combined with hybrid machine learning approaches for structural health monitoring of multilayer thermal barrier coatings.

Structural health monitoring of multilayer thermal barrier coatings (TBCs) is very vital to ensure the structural integrity and service performance of the hot-section components of the aero-engine. In this paper, we theoretically and numerically demonstrated that the terahertz time domain spectrum and the terahertz reflectance spectrum could be adopted to estimate the structure parameters, based on the finite difference time domain (FDTD) algorithm, 64 samples which were imported with three kinds of 64 sets structure parameters had been calculated to obtain the time domain and terahertz reflectance signals. To mimic the actual test signals, the original FDTD simulation signals were processed by adding the Gaussian white noise and wavelet noise reduction. To reduce the data dimension and improve the calculation efficiency during modeling, the principal component analysis (PCA) algorithm was adopted to reduce the dimensions of time-domain data and reflectance data. Finally, these data after multiple signal processing and PCA feature extraction were used to train the extreme learning machine (ELM), combining the genetic algorithm (GA) could optimize the PCA-ELM model and further improve the prediction performance of the hybrid model. Our proposed novel and efficient terahertz nondestructive technology combined with the hybrid machine learning approaches provides great potential applications on the multilayer TBCs structural integrity evaluation.

Hydrogen Concentration Distribution in 2.25Cr-1Mo-0.25V Steel under the Electrochemical Hydrogen Charging and Its Influence on the Mechanical Properties.

The deterioration of the mechanical properties of metal induced by hydrogen absorption threatens the safety of the equipment serviced in hydrogen environments. In this study, the hydrogen concentration distribution in 2.25Cr-1Mo-0.25V steel after hydrogen charging was analyzed following the hydrogen permeation and diffusion model. The diffusible hydrogen content in the 1-mm-thick specimen and its influence on the mechanical properties of the material were investigated by glycerol gas collecting test, static hydrogen charging tensile test, scanning electron microscopy (SEM) test, and microhardness test. The results indicate that the content of diffusible hydrogen tends to be the saturation state when the hydrogen charging time reaches 48 h. The simulation results suggest that the hydrogen concentration distribution can be effectively simulated by ABAQUS and the method can be used to analyze the hydrogen concentration in the material with complex structures or containing multiple microstructures. The influence of hydrogen on the mechanical properties is that the elongation of this material is reduced and the diffusible hydrogen will cause a decrease in the fracture toughness of the material, and thus hydrogen embrittlement (HE) will occur. Moreover, the Young's modulus E and microhardness are increased due to hydrogen absorption, and the variation value is related to the hydrogen concentration introduced into the specimen.