CFD-based pesticide selection for a nozzle used in a six-rotor UAV in hover mode for tea spraying.

BACKGROUND: A key challenge for unmanned aerial vehicle (UAV) spraying sometimes used in tea plantations is the downwash flow structure there stronger than in crops. In addition, the UAV spray is affected by the relationship between the nozzle design and the pesticide. However, there is little current research on this aspect. As a preliminary step this study focuses on the most appropriate pesticide for a designated nozzle in a six-rotor UAV according to the nozzle-pesticide relationship using a three-dimensional computational fluid dynamics model. This model considers the downwash flow structure effect and nozzle spray performance in hover. Nozzle FVP110-02, widely used in six-rotor UAVs, is used as a representative nozzle and bifenthrin and tea saponin water, commonly used in tea plantations, are used as the pesticides. RESULTS: The downwash flow structure of the six-rotor UAV in hover was conveniently controlled by the flight height and rotational speed, thereby causing the turbulence to be more stable. For nozzle FVP110-02, bifenthrin was more appropriate than tea saponin water at the same concentration, whilst bifenthrin and tea saponin water at a concentration of 1:1000 showed the best performance under identical working conditions. CONCLUSION: The numerical model developed here was shown to be effective for investigating the relationship between nozzle and pesticide. Our findings will help to not only improve UAV spraying for tea cultivation but also provide guidelines for pesticide selection in crops. Further work will address the comparison of the rigorous qualification of the numerical simulations with the measurements by the field test. © 2023 Society of Chemical Industry.

Leaf shape, planting density, and nitrogen application affect soybean yield by changing direct and diffuse light distribution in the canopy.

When attempting to maximize the crop yield from field-grown soybean (Glycine max (L.) Merr.) by means of improving the light conditions for photosynthesis in the canopy, it is crucial to find the optimal planting density and nitrogen application rate. The soybean plants that were the subject of our experiment were cultivated in N-dense mutual pairs, and included two cultivars with different leaf shapes; one cultivar sported ovate leaves (O-type) and the other lanceolate leaves (L-type). We analyzed the results quantitatively to determine the amount of spatial variation in light distribution and photosynthetic efficiency across the canopy, and to gauge the effect of the experimental parameters on the yield as well as the photosynthetic light and nitrogen use efficiency of the crop. Results indicate that the different leaf shapes were responsible for significant disparities between the photosynthetic utilization of direct and diffuse light. As the nitrogen fertilizer rate and the planting density increased, the soybean plants responded by adjusting leaf morphology in order to maximize the canopy apparent photosynthetic light use efficiency, which in turn affected the leaf nitrogen distribution in the canopy. Despite the fact that the light interception rate of the canopy of the L-type cultivar was lower than that of the canopy of the O-type cultivar, we found its canopy apparent photosynthetic nitrogen and light use efficiency were higher. It was interesting to note, however, that the nitrogen and light use efficiency contributions associated with exposure to diffuse light were greater for the latter than for the former.