Glucose and H2O2 Dual-Responsive Nanocomplex Grafted with Insulin Prodrug for Blood Glucose Regulation.

Although "closed-loop" smart insulin delivery systems have been extensively investigated, the majority of them suffer from low insulin loading efficiency and slow glucose response. Here, we constructed a novel nanocomplex (NC), which was prepared by electrostatic interaction between negatively charged insulin prodrug nanoparticles (NPs) and positively charged polycaprolactone-polyethylenimine (PCL-PEI) micelles. The insulin prodrug was linked to acetalated dextran (AD) via borate ester bonds to form IAD NPs, and glucose oxidase (GOx) was encapsulated in PCL-PEI micelles. The NC was negatively charged with a high insulin grafting rate (0.473 mg/mg), and in vitro experiments revealed that IAD was sensitive to hyperglycemia and H2O2, whereas GOx significantly improved the response to glucose by altering the microenvironment to promote sustained insulin release. Furthermore, compared with free insulin and IAD NPs, subcutaneously injected NCs in diabetic rats had long-term hypoglycemic effects, showing excellent biocompatibility in vitro and in vivo, which had good potential in insulin self-regulation delivery.

Engineered PLGA microspheres for extended release of brexpiprazole: in vitro and in vivo studies.

OBJECTIVE: To develop poly(d,l-lactide-co-glycolide) (PLGA) microspheres to achieve controlled and sustained release of brexpiprazole in vivo. METHODS: Brexpiprazole microspheres were prepared by oil-in-water emulsion-solvent evaporation method and evaluated for morphology, particle size, encapsulation efficiency, drug loading, conformation and compatibility of drug and polymer, in vitro release, and in vivo pharmacokinetics. By establishing the relationship between in vitro and in vivo release, it helps identify the appropriate in vitro release conditions to explore release profiles of brexpiprazole microspheres. RESULTS: Porous PLGA microspheres with near spherical morphology were obtained displaying an average diameter of 20.43 ± 0.06 µm, a drug loading capacity of 27.24 ± 0.33% and an encapsulation efficiency of 81.87 ± 1.07%. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), and differential scanning calorimetry (DSC) analysis showed that some drugs encapsulated in the microspheres remained in the amorphous state and some were in the crystalline state. Different release setups resulted in different release kinetics. The dialysis release setup displayed a cumulative release of about 65% within 60 days, while the sample-and-separate setup showed a cumulative release of about 77% within 35 days. Per pharmacokinetic studies in rats, a burst phase in the plasma concentration-time curve was observed after intramuscular injection in the first 2 h followed by a clear zero-order release phase. Overall, brexpiprazole achieved in vivo sustained release from PLGA microspheres for up to 40 days. CONCLUSION: A PLGA microsphere loaded with brexpiprazole was successfully developed and demonstrated potential for extended-release of therapeutics for schizophrenia treatment.

Therapeutic effect of pH-Responsive dexamethasone prodrug nanoparticles on acute lung injury.

Acute lung injury/inflammation (ALI) is usually caused by various injury factors inside and outside the lung, which can be transformed into acute respiratory distress syndrome (ARDS) in severe cases. Alveolar macrophages play a key role in the pathogenesis of ALI, which regulate inflammatory responses by secreting inflammatory mediators. Therefore, we prepared dexamethasone (DXM)/mannose co-modified branched polyethyleneimine (PEI) (DXM-PEI-mannose, DPM) prodrug nanopartcales, which could effectively target the mannose receptor (MR) on the surface of alveolar macrophages and be used for the treatment of ALI. The DXM-PEI (DP) prodrug was obtained by linking DXM with branched PEI through Schiff base reaction. Subsequently, the pH-responsive DPM prodrug was obtained by using mannose-targeted head modification. The DPM prodrug NPs with a particle size of 115 ± 1 nm, a polydispersity index (PDI) value of 0.054 ± 0.018, and a zeta potential of 31 ± 1 mV were obtained by cross-linking. The drug loading of DPM prodrug NPs measured by the acid hydrolysis method was 51.88%, which had good serum stability and biocompatibility. By comparing the stability and property release of prodrug NPs under different pH (7.4 and 5.0) conditions, it showed that DPM prodrug NPs had certain sensitivity to the micro-acid environment. To study the targeting of mouse mononuclear macrophages, mannose-modified prodrug NPs showed significant in vitro targeting. Moreover, prodrug NPs showed good anti-inflammatory activity in vitro, which was significantly different from free drugs. In vivo biodistribution experiments also showed that it had a long-term lung targeting effect. DPM prodrug NPs also had a good therapeutic effect on ALI. In conclusion, the mannose-modified DXM prodrug NPs delivery system could specifically target lung tissues and have a good therapeutic effect, which might be useful for the treatment of lung diseases.

[Preparation and Characterization of Clopidogrel Bisulfate Liposomes].

OBJECTIVE: To prepare encapsulated clopidogrel bisulfate (CLP) liposomes so as to deal with the poor water solubility of CLP, and to provide the experimental basis for the development of CLP formulations for intravascular injection. METHODS: CLP-loaded liposomes were prepared using thin film hydration/sonication method and pH gradient active drug loading technology. Then, the morphology, particle size, encapsulation efficiency, drug loading capacity, Zeta potentials and in vitro release behavior were characterized. Bilateral renal arteries of Sprague-Dawley (SD) rats were clamped with micro-artery clamps to establish the model of renal ischemia-reperfusion injury (IRI) in male SD rats. The study aimed to preliminarily investigate the therapeutic effect of CLP-loaded liposome pretreatment on renal IRI in rats. RESULTS: It was found that the optimal formulation and preparation technology of CLP liposomes were as follows: the CLP-to-phospholipid weight ratio of 1∶10, phospholipid-to-cholesterol ratio of 6∶1, octadecylamine-to-CLP ratio of 1.2∶1, PEG 400-to-CLP ratio of 1∶1, and incubation at 50 ℃ for 40 min. Then, following ultrasonication of 100 W efficiency at 5-second intervals for 20 times, CLP loading was conducted using 5 mL of 0.1 mol/L citric acid buffer at pH 3.0. Liposome samples were prepared with the film dispersion method, and the pH value was adjusted to 7.5 through pH gradient active drug loading technology. The CLP-loaded liposomes obtained in this way had a rounded shape, good dispersity, an average particle size of (134.13±2.60) nm, polydispersity index (PDI) of 0.25±0.02, and a Zeta potential of (2.12±0.23) mV. The encapsulation efficiency was found to be (98.66±0.14)%, and the drug loading capacity was (7.47±0.01)%. The in vitro release results showed that 66.24% of CLP was released cumulatively within 72 h. Preliminary efficacy experiments showed that animals pretreated with CLP-loaded liposomes had lower serum levels of blood urea nitrogen and creatinine compared to the levels of IRI model rats without any pretreatment. CONCLUSION: CLP-loaded liposomes were successfully prepared, which might provide the experimental foundation for the future development of CLP formulations for injection.

Construction of Inflammatory Directed Polymer Micelles and Its Application in Acute Lung Injury.

Currently, there is no specific treatment for acute lung injury (ALI) in clinical practice. In order to efficiently and accurately treat ALI, the advantages of cationic carriers were combined to accelerate the cell uptake. Polycaprolactone-polyethylene glycol carrier (PCL-PEG-COOH, PPC) with good biocompatibility, polycaprolactone-polyethylmethacrylate cationic carrier (PCL-PDMAEMA, PCD), and polycaprolactone-polyethylene glycol carrier connected with high-affinity targeting peptide (Esbp) targeting inflammatory endothelial cells (PCL-PEG-Esbp, PPE) were used to construct the high-molecular polymer micelles (PCD/PPC/PPE). The particle size of the prepared DEX-loaded micelles was 130 ± 4.41 nm, and the Zeta potential was 28.3 ± 0.76 mV. The CMC value of the prepared polymer micelles was 0.643 µg/mL, and it was not easy to depolymerize in the blood circulation. Only about 40% DXM was released from the drug-loaded polymer micelles after 12 h compared with free DXM, indicating that the micelle material had a certain sustained-release performance in vitro release experiments. The safe concentration range of polymer was determined by biocompatibility test. It was recommended that the concentration of polymer micelles should not exceed 0.40 mg/mL to obtain a good compatibility in organisms. The results of cytotoxicity measurement showed that when the content of PCD increased to 50%, the concentration of blank micelles should not exceed 500 µg/mL and the concentration of DXM-loaded micelles should not be higher than 100 µg/mL. It was proved in the cell uptake experiment that the cation carrier of the micelles accelerated the cell uptake. The targeting ability of the targeted micelle group was higher compared with the non-targeted micelle group (P < 0.01, **). Meanwhile, the targeting ability of the non-targeted micelle group was higher compared with the free group (P < 0.001, ***). The targeting ability of the non-targeted micelle group was about 2.30 times and the targeted micelle group was about 3.16 times larger than that of the free group. It was also proved in the in vivo targeting experiments that the targeted micelles had a good targeting ability. The results of in vivo imaging of mice showed that the DXM of the micelle group gathered more in the lungs, and the micelle group had a better targeting ability compared with the free DID group. The order of lung targeting intensity was targeted micelles > non-targeted micelles >> free DID group. The targeting ability of polypeptide Esbp to ALI was confirmed. In conclusion, the prepared PCD/PPC/PPE polymer micelles had obvious in vitro and in vivo targeting ability and good biocompatibility. They could be used as a new targeted delivery system for the treatment of ALI in the future.

The Role of Surface Properties on Protein Aggregation Behavior in Aqueous Solution of Different pH Values.

This study aimed to investigate the effect of pH-mediated surface properties of bovine serum albumin (BSA) on protein aggregation and the changes of protein structure and colloidal stability at different solution pH levels. The hydrophobicity of BSA surface was characterized by endogenous fluorescence spectroscopy, fluorescence quenching of acrylamide, and fluorescence probe. The results showed that the hydrophobicity of BSA surface was similar at pH 5, 6, 7.4, followed by pH 4, 8, 9, 10, and finally by pH 3 and 11 with strong acidity and alkalinity. The positive charge on the BSA surface was increased gradually with the decrease of solution pH, while the negative charge on protein surface was increased gradually with the increase of solution pH. The degree of protein aggregation was examined by turbidimetry, flow cytometry, and SDS-PAGE. The results showed that the oscillating aggregation of BSA did not change with the solution pH, but was partially dependent on the relative contribution of electrostatic and hydrophobic interactions between the protein molecules. In addition, the secondary structure, conformational stability, unfolding degree, and colloidal stability of proteins were investigated by circular dichroism, fluorescence spectroscopy, protein pulse hydrolysis, and dynamic light scattering, respectively. The results suggested that the solution pH could change the structure and stability of the protein at different levels. Solution pH has distinct effects on the structural stability of protein at different levels. The change of protein surface properties mediated by solution pH is related to protein aggregation.

Targeted thrombolysis by using c-RGD-modified N,N,N-Trimethyl Chitosan nanoparticles loaded with lumbrokinase.

Lumbrokinase (LK) has strong fibrinolytic and thrombolytic activities, but it has a short half-life, can be easily inactivated, and may cause hemorrhage as a side effect. This study develops a potential thrombolytic therapy by fabricating N,N,N-Trimethyl Chitosan (TMC) nanoparticles modified with the cyclic Arg-Gly-Asp-Phe-Lys peptide (c-RGD) and loaded with LK (i.e. c-RGD-LK-NPs). The binding of c-RGD to platelet membrane GPIIb/IIIa receptors is expected to enable targeted delivery of the c-RGD-conjugated TMC to the thrombus. The synthesized c-RGD-LK-NPs had a mean particle size of 232.0 nm, zeta potential of 19.8 mV, entrapment efficiency of 52.7% ± 2.5%, and loading efficiency of 17.4% ± 0.65%. Transmission electron microscopy showed that they were generally spherical. The c-RGD-LK-NPs gave a cumulative in vitro LK release of 80.6% over 8 h, and the activity of LK was close to 80%, indicating that the nanoparticles protected the activity of LK. In vitro blood clot lysis assays were carried out and in vivo thrombolysis effect was tested in Sprague-Dawley rats carotid artery thrombus model. In all cases, the c-RGD-LK-NPs showed superior performance compared with the free LK and the unmodified TMC nanoparticles loaded with LK. The c-RGD-LK-NPs reagent is expected to be potentially useful in treating thromboembolic diseases.

E-Selectin-Binding Peptide-Modified Bovine Serum Albumin Nanoparticles for the Treatment of Acute Lung Injury.

Currently, there is no specific treatment for acute lung injury (ALI). E-selectin-binding peptide (Esbp), a high-affinity peptide that delivers drugs targeting inflammatory vascular endothelial cells, can bind to E-selectin and act as a targeting ligand for selective drug delivery. In this study, we coupled the thiol groups of Esbp to the amino groups on the surface of bovine serum albumin (BSA) using succinimidyl iodoacetic acid to make Esbp-modified BSA nanoparticles (BSANPs) at the average ratio of 19.3 µg Esbp to 1 mg BSA. The Esbp-modified BSANPs were spherical in shape and had a particle size of 266.7 ± 2.7 nm, polydispersity index of 0.165 ± 0.02, zeta potential of - 33.64 ± 1.23 mV, encapsulation efficiency of 84.3 ± 2.3%, and drug loading of 6.7 ± 0.32%. The cumulative release rate of dexamethasone-loaded Esbp-modified BSANPs was 51.2% within 12 h, significantly lower than that of 88.2% of free drugs. Moreover, Esbp-modified BSANPs could be uptaken in vitro by activated human umbilical vein endothelial cells and in vivo by the lungs of the established ALI mouse model. These results indicated that our Esbp-modified BSANPs delivery system has characteristics of good targeting ability and biocompatibility and is able to inhibit inflammation. Overall, our Esbp-modified BSANPs delivery system has therapeutic potentials as a new targeting drug system for the treatment of ALI in the future.

Protein Aggregation and Performance Optimization Based on Microconformational Changes of Aromatic Hydrophobic Regions.

Protein aggregation is a key concern in biopharmaceutical development and manufacturing. There is growing interest in understanding how the changes in protein microconformation affect the aggregation behavior. This study selected several representative proteins and first manipulated microconformational changes of the aromatic hydrophobic regions of proteins, especially tryptophan residues, by using amine or guanidine additives. The effects of the interactions between the additives and proteins on the aromatic hydrophobic regions could be grouped into three categories: exposure to solvent, burial into core, and no change. The microconformational parameters of the tryptophan residue, including fluorescence peak position (λm), degree of hydrolysis, solvent accessible surface area ( SAS), and packing density ( Den), were obtained by steady-state fluorescence spectroscopy, proteolysis coupled with electrophoresis, and molecular dynamics simulation. Furthermore, the aggregation degrees of globular proteins with distinct surface aromatic hydrophobilities under mechanical stress were investigated. A strong correlation was observed between protein aggregation and the microconformational changes of the aromatic hydrophobic regions incurred by amine or guanidine additives. Protein aggregation was enhanced when the aromatic hydrophobic regions were exposed to the solvent but suppressed when the additives led to burial of the aromatic hydrophobic regions with lower-polarity microenvironment. These findings shed light on the relationship between protein aggregation and molecular conformation and paved way for future preformulation studies of therapeutic proteins.

Co-delivery of Metformin and Paclitaxel Via Folate-Modified pH-Sensitive Micelles for Enhanced Anti-tumor Efficacy.

Single chemotherapeutic agent like paclitaxel (PTX) has shown some limitations in anti-tumor treatment, such as undesirable side effects, multidrug resistance, and high toxicity. In order to reduce the toxicity of PTX and increase the anti-tumor effect, folate-modified amphiphilic and biodegradable biomaterial was developed to co-deliver PTX and metformin (MET) for exerting the synergistic effect. PTX was physically entrapped in the hydrophobic inner core of the amphiphilic block copolymer by a solvent evaporation method, whereas MET was chemically conjugated to the hydrophilic terminals of copolymer via a pH-sensitive cis-aconityl linkage (Cis). The in vitro release behaviors of the drugs were analyzed by high-performance liquid chromatography (HPLC), and the synergistic effect of the drugs was evaluated by a Q value method. Results showed that drug-loaded micelles with an average size about 100 nm were successfully constructed. In acidic environments, the chemically conjugated MET was rapidly released after the breakage of sensitive bond between drug and copolymer. In vitro anti-tumor studies demonstrated that MET and PTX had a synergistic effect and co-delivery micelles induced higher cytotoxicity and apoptosis against 4T1 breast cancer cells than free drugs. Furthermore, folate-targeted co-delivery micelles increased the cellular uptake of drugs and were found to be effective for the treatment of solid tumor in vivo. These findings indicated that co-delivery of MET and PTX through the polymeric micelles is a promising strategy for cancer therapy.

Annexin V-Conjugated Mixed Micelles as a Potential Drug Delivery System for Targeted Thrombolysis.

To alleviate the hemorrhagic side effect of thrombolysis therapy, a thrombus targeted drug delivery system based on the specific affinity of Annexin V to phosphatidylserine exposed on the membrane surface of activated platelet was developed. The amphiphilic and biodegradable biomaterial, polycaprolactone-block-poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-hydroxyethyl methacrylate) (PCL-b-PDMAEMA-b-PHEMA (PCDH)) triblock polymer, was synthesized via ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP) to use as the nanocarriers of thrombolytic drug. In order to conjugate Annexin V to the polymer, PCDH was modified by succinic anhydride via ring-opening reaction to introduce the carboxyl group (PCDH-COOH). After preparation of PCDH/PCDH-COOH (9/1, m/m) mixed micelles, Annexin V was coupled with the micelles using carbodiimide chemistry. The blood clot lysis assay in vitro confirmed that lumbrokinase-loaded targeted micelles (LKTM) had stronger thrombolysis potency than free lumbrokinase (LK) and LK-loaded nontargeted micelles (LKM, P < 0.05). In vivo thrombolytic assay, multispectral, optoacoustic tomography (MSOT) was used to assess the target ability of LKTM. The results of MSOT images indicated the fluorescence intensity of the LKTM group located in the blood clot position were significantly stronger than the LKM group. A 5 mm of carotid artery containing blood clot was cut out 24 h later after administration to assess the degree of thrombolysis. The results of thrombolytic assay in vivo were consistent with the assay in vitro, which the differences between LK, LKM, and LKTM groups were both statistically significant. All the results of thrombolysis assays above proved that the capacity of thrombolysis in the LKTM group was optimal. It suggested that Annexin V-conjugated micelles will be a potential drug delivery system for targeted thrombolysis.

Bilateral Effects of Excipients on Protein Stability: Preferential Interaction Type of Excipient and Surface Aromatic Hydrophobicity of Protein.

PURPOSE: Understanding the mechanism of protein-excipient interaction and illuminating the influencing factors on protein stability are key steps in the rational design of protein formulations. The objective of this study was to assess effects of preferential interaction type of excipient and surface aromatic hydrophobicity of protein on protein solution stability. METHODS: The preferential interaction between excipient and aromatic hydrophobic area of protein was investigated by solubility and fluorescence studies of amino acid derivatives in excipient solutions. We examined conformational, colloidal and mechanical stabilities of model proteins with different surface aromatic hydrophobicities, including bovine serum albumin (BSA) and ovalbumin (OVA), and then stability data were visualized by three-index empirical phase diagram. RESULTS: The result showed that preferentially excluded excipients (trehalose, sucrose and sorbitol) protected protein conformation against damage, but they could accelerate mechanical stress-induced aggregation. Preferentially bound excipients (propanediol and arginine) suppressed BSA aggregation, but arginine failed to inhibit OVA aggregation, which might be attributed to the disparate conformational perturbing effects of arginine on aromatic hydrophobic regions of BSA and OVA. CONCLUSIONS: These findings provided strong evidence that excipient possessed bilateral effects, and its application should be determined on different preferential interaction behaviors of excipients with protein, especially with the aromatic hydrophobic region.

Enhanced Anti-Inflammatory Efficacy Through Targeting to Macrophages: Synthesis and In Vitro Evaluation of Folate-Glycine-Celecoxib.

As an effective COX-2 inhibitor, celecoxib is widely used in anti-inflammation therapy. However, it may cause cardiovascular risks and renal adverse effects. In the present study, we aimed to construct a celecoxib prodrug with enhanced anti-inflammatory efficacy and reduced adverse effects using folate in order to target activated macrophages. Folate-glycine-celecoxib was synthesized and identified by 1H-NMR, MS, and FTIR analyses. The cytotoxicity of folate-glycine-celecoxib was tested on murine macrophage cells (RAW264.7) using thiazolyl blue tetrazolium bromide. Cellular uptake studies were employed to determine targeting ability toward folate receptors via flow cytometry and confocal microscopy. Anti-inflammatory efficacy of folate-glycine-celecoxib was investigated by measuring the concentration of LPS-induced nitric oxide (NO). Folate-glycine-celecoxib exhibited lower cytotoxicity than conventional celecoxib, and this conjugate could be targetedly transported into RAW264.7 cells through binding with folate receptors on cell surface. Through targeting to RAW264.7 cells, folate-glycine-celecoxib exhibited better effects than equimolar celecoxib in NO inhibition, suggesting greater anti-inflammatory activity. These findings demonstrated that the prodrug folate-glycine-celecoxib had potential to treat inflammatory disease with low cytotoxicity and high targeting ability.

The role of lipid-based nano delivery systems on oral bioavailability enhancement of fenofibrate, a BCS II drug: comparison with fast-release formulations.

The aim of this study was to compare various formulations solid dispersion pellets (SDP), nanostructured lipid carriers (NLCs) and a self-microemulsifying drug delivery system (SMEDDS) generally accepted to be the most efficient drug delivery systems for BCS II drugs using fenofibrate (FNB) as a model drug. The size and morphology of NLCs and SMEDDS was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Their release behaviors were investigated in medium with or without pancreatic lipase. The oral bioavailability of the various formulations was compared in beagle dogs using commercial Lipanthyl® capsules (micronized formulation) as a reference. The release of FNB from SDP was much faster than that from NLCs and SMEDDS in medium without lipase, whereas the release rate from NLCs and SMEDDS was increased after adding pancreatic lipase into the release medium. However, NLCs and SMEDDS increased the bioavailability of FNB to 705.11% and 809.10%, respectively, in comparison with Lipanthyl® capsules, although the relative bioavailability of FNB was only 366.05% after administration of SDPs. Thus, lipid-based drug delivery systems (such as NLCs and SMEDDS) may have more advantages than immediate release systems (such as SDPs and Lipanthyl® capsules).

Synthesis and optimization of a bifunctional hyaluronan-based camptothecin prodrug.

Aiming to overcome the low solubility and poor targeting ability of camptothecin (CPT), two hyaluronan (HA)-based polymeric prodrugs with different molecular weights (MW) were synthesized and characterized. The structure of HA-CPT was thoroughly verified by ultraviolet (UV), infrared (IR), (1)H nuclear magnetic resonance ((1)H NMR), differential scanning calorimetry (DSC), and high performance liquid chromatography (HPLC). The conjugation of CPT to HA successfully improved the solubility of CPT from 2.08 to 420-620 µg/mL and enhanced tumor targeting, as shown by the in vitro uptake and cytotoxicity results. Moreover, it was found that the high MW conjugate exhibited higher drug loading, higher stability but lower solubility compared with the low MW conjugate. Both HA-CPT conjugates exhibited similar uptake efficiency and antitumor activity. The results demonstrated that HA could act as an effective solubilization carrier and targeting molecule in a HA-based CPT prodrug.

A ROS-responsive multifunctional targeted prodrug micelle for atherosclerosis treatment.

Atherosclerosis is a chronic multifactorial cardiovascular disease. To combat atherosclerosis effectively, it is necessary to develop precision and targeted therapy in the early stages of plaque formation. In this study, a simvastatin (SV)-containing prodrug micelle SPCPV was developed by incorporating a peroxalate ester bond (PO). SPCPV could specifically target VCAM-1 overexpressed at atherosclerotic lesions. SPCPV contains a carrier (CP) composed of cyclodextrin (CD) and polyethylene glycol (PEG). At the lesions, CP and SV exerted multifaceted anti-atherosclerotic effects. In vitro studies demonstrated that intracellular reactive oxygen species (ROS) could induce the release of SV from SPCPV. The uptake of SPCPV was higher in inflammatory cells than in normal cells. Furthermore, in vitro experiments showed that SPCPV effectively reduced ROS levels, possessed anti-inflammatory properties, inhibited foam cell formation, and promoted cholesterol efflux. In vivo studies using atherosclerotic rats showed that SPCPV reduced the thickness of the vascular wall and low-density lipoprotein (LDL). This study developed a drug delivery strategy that could target atherosclerotic plaques and treat atherosclerosis by integrating the carrier with SV. The findings demonstrated that SPCPV possessed high stability and safety and had great therapeutic potential for treating early-stage atherosclerosis.

Construction of PLGA nanoparticles modified with RWrNM and DLPC and their application in acute rhinosinusitis.

In an effort to overcome the nasal mucus barrier and epithelial barrier, as well as reduce entry into the bloodstream, we designed RWrNM and DLPC-modified PLGA nanoparticles (PDR-NPs). These nanoparticles were further encapsulated with dexamethasone acetate (Dexac) to form Dexac/PDR-NPs. Transmission electron microscopy (TEM) analysis revealed their spherical shape with an outer lipid layer. Dynamic light scattering (DLS) determined their particle size to be 125.77 ± 2.01 nm, with a polydispersity index (PDI) of 0.139 ± 0.029. The experimental results demonstrate that DLPC-modified PLGA nanoparticles can effectively reduce interactions with mucin at different concentrations, decrease aggregation, and facilitate their crossing of the mucus barrier. Additionally, results from the cellular uptake assay revealed a significantly greater uptake of PDR-NPs by inflammatory RAW 264.7 cells (2.99-fold higher than that of free C6, p < 0.0001) and inflammatory HUVECs (7.20-fold higher than that of free C6, p < 0.0001). Furthermore, Dexac/PDR-NPs effectively reduced the levels of inflammatory factors nitric oxide (NO) (p < 0.001) and interleukin-6 (IL-6) (p < 0.05) in the supernatant of inflammatory RAW 264.7 cells. Intravital imaging of rats revealed that PDR-NPs had a longer residence time in inflamed nasal tissue compared to PD-NPs. Furthermore, in vivo pharmacodynamic experiments showed that Dexac/PDR-NPs effectively reduced the symptoms of nasal inflammation, lowered the pH of nasal secretions, decreased serum inflammatory factor levels (TNF-α and IL-6), and reduced nasal mucosal inflammatory factor levels (IL-1ß), while also reducing the degree of inflammation in the nasal mucosa. Both cytotoxicity assays and in vivo results indicate that PDR-NPs have a good safety profile. PDR-NPs not only overcome the nasal mucus barrier but also reduce the systemic toxicities associated with drug entry into the circulation by enhancing the targeting of inflammatory macrophages and inflammatory vascular endothelial cells. PDR-NPs allow for an "open sources and cut costs" treatment strategy to increase drug retention in the inflamed nasal tissues, reducing toxicity and increasing efficacy. In conclusion, PDR-NPs can be a promising drug delivery system for the local treatment of acute rhinosinusitis.

ICAM-1 targeted and ROS-responsive nanoparticles for the treatment of acute lung injury.

Acute lung injury (ALI) is an inflammatory disease caused by multiple factors such as infection, trauma, and chemicals. Without effective intervention during the early stages, it usually quickly progresses to acute respiratory distress syndrome (ARDS). Since ordinary pharmaceutical preparations cannot precisely target the lungs, their clinical application is limited. In response, we constructed a γ3 peptide-decorated and ROS-responsive nanoparticle system encapsulating therapeutic dexamethasone (Dex/PSB-γ3 NPs). In vitro, Dex/PSB-γ3 NPs had rapid H2O2 responsiveness, low cytotoxicity, and strong intracellular ROS removal capacity. In a mouse model of ALI, Dex/PSB-γ3 NPs accumulated at the injured lung rapidly, alleviating pulmonary edema and cytokine levels significantly. The modification of NPs by γ3 peptide achieved highly specific positioning of NPs in the inflammatory area. The ROS-responsive release mechanism ensured the rapid release of therapeutic dexamethasone at the inflammatory site. This combined approach improves treatment accuracy, and drug bioavailability, and effectively inhibits inflammation progression. Our study could effectively reduce the risk of ALI progressing to ARDS and hold potential for the early treatment of ALI.

Intestinal absorption of raltitrexed and evaluation of the effects of absorption enhancers.

Raltitrexed (RTX) has shown clinical activity in a variety of advanced solid tumours. Its oral bioavailability is low and its intestinal absorption mechanism is not clear. In the present study, the absorption mechanism of RTX in the small intestine was investigated, and the effects of absorption enhancers and efflux transporter inhibitors were evaluated by in vitro transport studies using the Caco-2 cell model and in situ perfusion experiments in rats. Oral bioavailability of RTX in rats in the presence or absence of enhancers were also investigated. The results of in vitro and in situ experiments indicated that the kinetic model of combined mechanism (active and passive transport) fitted the concentration-time data of RTX best with the highest R2 and lowest SSE (Sum of Squares for Error). The apparent or effective permeability coefficient (P(app) or P(eff)) of RTX remained statistically constant in a certain concentration range, then decreased when the concentration increased. But the decrease trend did not continue with further increase in concentration. And folic acid could competitively inhibit RTX absorption. These results suggested that a combined absorption mechanism for RTX existed. Furthermore, within certain concentration ranges, Carbomer 934P and sodium caprate (Cap-Na) exhibited significant absorption enhancement effects with low toxicity, whereas the enhancement effects of sodium deoxycholate (Deo-Na) were accompanied with acute toxicities. Moreover, probenecid and pantoprazole obviously enhanced RTX absorption, demonstrating that RTX is a substrate of the multidrug resistance protein (MRP) and breast cancer resistance protein (BCRP). A secretion experiment indicated that RTX could be effluxed into the intestines both with bile and by active efflux action. Oral bioavailability of RTX was significantly improved by the investigated absorption enhancers and transporter inhibitors, which is consistent with the in vitro and in situ experiments.

[Characterization of thermal denaturation process of proteinase K by spectrometry].

The effect of different temperatures on the activity and conformational changes of proteinase K was studied. Methods Proteinase K was treated with different temperatures, then denatured natural substrate casein was used to assay enzyme activity, steady-state and time-resolved fluorescence spectroscopy was used to study tertiary structure, and circular dichroism was used to study secondary structure. Results show with the temperature rising from 25 to 65 degrees C, the enzyme activity and half-life of proteinase K dropped, maximum emission wavelength red shifted from 335 to 354 nm with fluorescence intensity decreasing. Synchronous fluorescence intensity of tryptophan residues decreased and that of tyrosine residues increased. Fluorescence lifetime of tryptophan residues reduced from 4. 427 1 to 4. 032 4 ns and the fraction of alpha-helix dropped. It was concluded that it is simple and accurate to use steady-state/time-resolved fluorescence spectroscopy and circular dichroism to investigate thermal stability of proteinase K. Thermal denaturation of proteinase K followed a three-state process. Fluorescence intensity of proteinase K was affected by fluorescence resonance energy transfer from tyrosine to tryptophan residues. The alpha-helix was the main structure to maintain conformational stability of enzyme active site of proteinase K.