RESUMO
This paper reports design, fabrication, and experimental demonstration of a silicon nitride photonic integrated circuit (PIC). The PIC is capable of conducting one-dimensional interferometric imaging with twelve baselines near λ = 1100-1600 nm. The PIC consists of twelve waveguide pairs, each leading to a multi-mode interferometer (MMI) that forms broadband interference fringes or each corresponding pair of the waveguides. Then an 18 channel arrayed waveguide grating (AWG) separates the combined signal into 18 signals of different wavelengths. A total of 103 sets of fringes are collected by the detector array at the output of the PIC. We keep the optical path difference (OPD) of each interferometer baseline to within 1 µm to maximize the visibility of the interference measurement. We also constructed a testbed to utilize the PIC for two-dimension complex visibility measurement with various targets. The experiment shows reconstructed images in good agreement with theoretical predictions.
RESUMO
We report on uniform emission intensity profile, uniform propagation constant silicon gratings for beam steering application with ultra-sharp instantaneous field-of-view (IFOV). To achieve uniform emission intensity across relatively long emission length, we designed a custom grating with varying Si3N4 width and duty cycle while maintaining a uniform propagation constant for relatively narrow divergence emission pattern. We designed and fabricated the custom Si3N4/Si grating with the varying Si3N4 width/duty cycle together with the reference Si3N4/Si grating with a constant 50:50 duty cycle. The custom grating demonstrated the beam steering angle value of 6.6° by sweeping wavelength between 1530 nm and 1575 nm with the emission length over 1 mm. The measured IFOV based on the 3-dB beamwidth values of the far field patterns for the TE polarization are 0.10° and 0.75° for the custom grating and for the reference grating, respectively. The custom grating also indicates mode-selective behavior due to the perturbation of propagation constant for input modes other than TE polarization. The measured TE-mode to TM-mode suppression ratio for the custom grating is approximately 8.2 dB peak-to-peak measured at far field.
RESUMO
We designed and demonstrated a tri-layer Si3N4/SiO2 photonic integrated circuit capable of vertical interlayer coupling with arbitrary splitting ratios. Based on this multilayer photonic integrated circuit platform with each layer thicknesses of 150 nm, 50 nm, and 150 nm, we designed and simulated the vertical Y-junctions and 3D couplers with arbitrary power splitting ratios between 1:10 and 10:1 and with negligible(< -50 dB) reflection. Based on the design, we fabricated and demonstrated tri-layer vertical Y-junctions with the splitting ratios of 1:1 and 3:2 with excess optical losses of 0.230 dB. Further, we fabricated and demonstrated the 1 × 3 3D couplers with the splitting ratio of 1:1:4 for symmetric structures and variable splitting ratio for asymmetric structures.
RESUMO
This paper reports design, fabrication, and demonstration of a silica photonic integrated circuit (PIC) capable of conducting interferometric imaging with multiple baselines around λ = 1550 nm. The PIC consists of four sets of five waveguides (total of twenty waveguides), each leading to a three-band spectrometer (total of sixty waveguides), after which a tunable Mach-Zehnder interferometer (MZI) constructs interferograms from each pair of the waveguides. A total of thirty sets of interferograms (ten pairs of three spectral bands) is collected by the detector array at the output of the PIC. The optical path difference (OPD) of each interferometer baseline is kept to within 1 µm to maximize the visibility of the interference measurement. We constructed an experiment to utilize the two baselines for complex visibility measurement on a point source and a variable width slit. We used the point source to demonstrate near unity value of the PIC instrumental visibility, and used the variable slit to demonstrate visibility measurement for a simple extended object. The experimental result demonstrates the visibility of baseline 5 and 20 mm for a slit width of 0 to 500 µm in good agreement with theoretical predictions.
RESUMO
We design, fabricate, and demonstrate a silicon nitride (Si(3)N(4)) multilayer platform optimized for low-loss and compact multilayer photonic integrated circuits. The designed platform, with 200 nm thick waveguide core and 700 nm interlayer gap, is compatible for active thermal tuning and applicable to realizing compact photonic devices such as arrayed waveguide gratings (AWGs). We achieve ultra-low loss vertical couplers with 0.01 dB coupling loss, multilayer crossing loss of 0.167 dB at 90° crossing angle, 50 µm bending radius, 100 × 2 µm(2) footprint, lateral misalignment tolerance up to 400 nm, and less than -52 dB interlayer crosstalk at 1550 nm wavelength. Based on the designed platform, we demonstrate a 27 × 32 × 2 multilayer star coupler.
RESUMO
We present experimental results for combined mode-multiplexed and wavelength multiplexed transmission over conventional graded-index multimode fibers. We use mode-selective photonic lanterns as mode couplers to precisely excite a subset of the modes of the multimode fiber and additionally to compensate for the differential group delay between the excited modes. Spatial mode filters are added to suppress undesired higher order modes. We transmit 30-Gbaud QPSK signals over 60 WDM channels, 3 spatial modes, and 2 polarizations, reaching a distance of 310 km based on a 44.3 km long span. We also report about transmission experiments over 6 spatial modes for a 17-km single-span experiment. The results indicate that multimode fibers support scalable mode-division multiplexing approaches, where modes can be added over time if desired. Also the results indicate that mode-multiplexed transmission distance over 300 km are possible in conventional multimode fibers.
RESUMO
Optical Orthogonal Frequency Division Multiplexing (O-OFDM), which transmits high speed optical signals using multiple spectrally overlapped lower-speed subcarriers, is a promising candidate for supporting future elastic optical networks. In contrast to previous works which focus on Coherent Optical OFDM (CO-OFDM), in this paper, we consider the direct-detection optical OFDM (DDO-OFDM) as the transport technique, which leads to simpler hardware and software realizations, potentially offering a low-cost solution for elastic optical networks, especially in metro networks, and short or medium distance core networks. Based on this network scenario, we design and deploy a software-defined networking (SDN) control plane enabled by extending OpenFlow, detailing the network architecture, the routing and spectrum assignment algorithm, OpenFlow protocol extensions and the experimental validation. To the best of our knowledge, it is the first time that an OpenFlow-based control plane is reported and its performance is quantitatively measured in an elastic optical network with DDO-OFDM transmission.
Assuntos
Algoritmos , Redes de Comunicação de Computadores/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Software , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We describe a technique for dynamic quantum optical arbitrary-waveform generation and manipulation, which is capable of mode selectively operating on quantum signals without inducing significant loss or decoherence. It is built upon combining the developed tools of quantum frequency conversion and optical arbitrary waveform generation. Considering realistic parameters, we propose and analyze applications such as programmable reshaping of picosecond-scale temporal modes, selective frequency conversion of any one or superposition of those modes, and mode-resolved photon counting. We also report on experimental progress to distinguish two overlapping, orthogonal temporal modes, demonstrating over 8 dB extinction between picosecond-scale time-frequency modes, which agrees well with our theory. Our theoretical and experimental progress, as a whole, points to an enabling optical technique for various applications such as ultradense quantum coding, unity-efficiency cavity-atom quantum memories, and high-speed quantum computing.
Assuntos
Óptica e Fotônica/instrumentação , Teoria Quântica , Desenho de Equipamento , FótonsRESUMO
We demonstrate free-space space-division-multiplexing (SDM) with 15 orbital angular momentum (OAM) states using a three-dimensional (3D) photonic integrated circuit (PIC). The hybrid device consists of a silica planar lightwave circuit (PLC) coupled to a 3D waveguide circuit to multiplex/demultiplex OAM states. The low excess loss hybrid device is used in individual and two simultaneous OAM states multiplexing and demultiplexing link experiments with a 20 Gb/s, 1.67 b/s/Hz quadrature phase shift keyed (QPSK) signal, which shows error-free performance for 379,960 tested bits for all OAM states.
RESUMO
This paper discusses the architecture and provides performance studies of a silicon photonic chip-scale optical switch for scalable interconnect network in high performance computing systems. The proposed switch exploits optical wavelength parallelism and wavelength routing characteristics of an Arrayed Waveguide Grating Router (AWGR) to allow contention resolution in the wavelength domain. Simulation results from a cycle-accurate network simulator indicate that, even with only two transmitter/receiver pairs per node, the switch exhibits lower end-to-end latency and higher throughput at high (>90%) input loads compared with electronic switches. On the device integration level, we propose to integrate all the components (ring modulators, photodetectors and AWGR) on a CMOS-compatible silicon photonic platform to ensure a compact, energy efficient and cost-effective device. We successfully demonstrate proof-of-concept routing functions on an 8 × 8 prototype fabricated using foundry services provided by OpSIS-IME.
RESUMO
We present the design, fabrication and characterization of athermal nano-photonic silicon ring modulators. The athermalization method employs compensation of the silicon core thermo-optic contribution with that from the amorphous titanium dioxide (a-TiO(2)) overcladding with a negative thermo-optic coefficient. We developed a new CMOS-compatible fabrication process involving low temperature RF magnetron sputtering of high-density and low-loss a-TiO(2) that can withstand subsequent elevated-temperature CMOS processes. Silicon ring resonators with 275 nm wide rib waveguide clad with a-TiO(2) showed near complete athermalization and moderate optical losses. Small-signal testing of the micro-resonator modulators showed high extinction ratio and gigahertz bandwidth.
Assuntos
Semicondutores , Silício/química , Ressonância de Plasmônio de Superfície/instrumentação , Telecomunicações/instrumentação , Titânio/química , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
This paper introduces Split Spectrum, which enhances elastic optical networking by splitting a bulk traffic demand into multiple channels, when a single-channel transmission is prohibited by distance or spectrum availability. We performed transmission simulations to determine the maximum reach as a function of modulation format (dual polarization BPSK, QPSK, 16QAM), baud-rate (from 5 to 28 GBd), and number of ROADMs, for a Nyquist WDM super-channel with subcarrier spacing equal to 1.2 × baud-rate. Performance evaluation on two representative topologies shows that, compared to the previously proposed elastic optical networking, Split Spectrum doubles the zero-blocking load and achieves 100% higher network spectral efficiency at zero-blocking loads as a result of extended transmission distance and efficient utilization of spectrum fragments.
RESUMO
While flexible bandwidth elastic optical networking is a promising direction for future networks, the spectral fragmentation problem in such a network inevitably raises the blocking probability and significantly degrades network performance. This paper addresses the spectral defragmentation problem using an auxiliary graph based approach, which transforms the problem into a matter of finding the maximum independent set (MIS) in the constructed auxiliary graph. The enabling technologies and defragmentation-capable node architectures, together with heuristic defragmentation algorithms are proposed and evaluated. Simulation results show that the proposed min-cost defragmentation algorithms can significantly reduce the blocking probability of incoming requests in a spectrally fragmented flexible bandwidth optical network, while substantially minimizing the number of disrupted connections.
Assuntos
Algoritmos , Tecnologia de Fibra Óptica/instrumentação , Tecnologia de Fibra Óptica/métodos , Fibras Ópticas , Telecomunicações/instrumentação , Informática MédicaRESUMO
This paper demonstrates a rapid and full hitless defragmentation method in elastic optical networks exploiting a new technique for fast wavelength tracking in coherent receivers. This technique can be applied to a single-carrier connection or each of the subcarriers forming a super-channel. A proof-of-concept demonstration shows hitless defragmentation of a 10 Gb/s QPSK single-carrier connection from 1547.75 nm to 1550.1 nm in less than 1 µs. This was obtained using a small (0.625 kB) link-layer transmitter buffer without the need for any additional transponder. We also demonstrated that the proposed defragmentation technique is capable of hopping over an existing connection, i.e. 10 Gb/s OOK at 1548.5 nm, without causing any degradation of its real-time Bit Error Rate (BER) value. The proposed scheme gives advantages in terms of overall network blocking probability reduction up to a factor of 40.
Assuntos
Algoritmos , Tecnologia de Fibra Óptica/instrumentação , Fibras Ópticas , Processamento de Sinais Assistido por Computador , Telecomunicações/instrumentação , Desenho de Equipamento , Humanos , Informática MédicaRESUMO
We propose and demonstrate silicon photonic integrated circuits (PICs) for free-space spatial-division-multiplexing (SDM) optical transmission with multiplexed orbital angular momentum (OAM) states over a topological charge range of -2 to +2. The silicon PIC fabricated using a CMOS-compatible process exploits tunable-phase arrayed waveguides with vertical grating couplers to achieve space division multiplexing and demultiplexing. The experimental results utilizing two silicon PICs achieve SDM mux/demux bit-error-rate performance for 1b/s/Hz, 10-Gb/s binary phase shifted keying (BPSK) data and 2-b/s/Hz, 20-Gb/s quadrature phase shifted keying (QPSK) data for individual and two simultaneous OAM states.
Assuntos
Semicondutores , Processamento de Sinais Assistido por Computador/instrumentação , Silício/química , Ressonância de Plasmônio de Superfície/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Integração de SistemasRESUMO
This Letter demonstrates a measurement technique based on frequency-to-time mapping and coherent detection, which enables the complete (i.e., amplitude and phase) characterization of dynamically reconfigurable photonic filters. We apply this technique to a unit cell from a silicon CMOS-compatible photonic lattice filter that has a rapidly changing transfer function with an 8.33 ns update time, 120 MHz spectral resolution, and 12 GHz bandwidth. These dynamic measurements allow characterization of transients, thermal effects, filter fidelity, and other time-dependent phenomena during switching.
RESUMO
We demonstrate an optical transmitter based on dynamic optical arbitrary waveform generation (OAWG) which is capable of creating high-bandwidth (THz) data waveforms in any modulation format using the parallel synthesis of multiple coherent spectral slices. As an initial demonstration, the transmitter uses only 5.5 GHz of electrical bandwidth and two 10-GHz-wide spectral slices to create 100-ns duration, 20-GHz optical waveforms in various modulation formats including differential phase-shift keying (DPSK), quaternary phase-shift keying (QPSK), and eight phase-shift keying (8PSK) with only changes in software. The experimentally generated waveforms showed clear eye openings and separated constellation points when measured using a real-time digital coherent receiver. Bit-error-rate (BER) performance analysis resulted in a BER < 9.8 × 10(-6) for DPSK and QPSK waveforms. Additionally, we experimentally demonstrate three-slice, 4-ns long waveforms that highlight the bandwidth scalable nature of the optical transmitter. The various generated waveforms show that the key transmitter properties (i.e., packet length, modulation format, data rate, and modulation filter shape) are software definable, and that the optical transmitter is capable of acting as a flexible bandwidth transmitter.
Assuntos
Refratometria/instrumentação , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We demonstrate a flexible-bandwidth network testbed with a real-time, adaptive control plane that adjusts modulation format and spectrum-positioning to maintain quality of service (QoS) and high spectral efficiency. Here, low-speed supervisory channels and field-programmable gate arrays (FPGAs) enabled real-time impairment detection of high-speed flexible bandwidth channels (flexpaths). Using premeasured correlation data between the supervisory channel quality of transmission (QoT) and flexpath QoT, the control plane adapted flexpath spectral efficiency and spectral location based on link quality. Experimental demonstrations show a back-to-back link with a 360-Gb/s flexpath in which the control plane adapts to varying link optical signal to noise ratio (OSNR) by adjusting the flexpath's spectral efficiency (i.e., changing the flexpath modulation format) between binary phase-shift keying (BPSK), quaternary phase-shift keying (QPSK), and eight phase-shift keying (8PSK). This enables maintaining the data rate while using only the minimum necessary bandwidth and extending the OSNR range over which the bit error rate in the flexpath meets the quality of service (QoS) requirement (e.g. the forward error correction (FEC) limit). Further experimental demonstrations with two flexpaths show a control plane adapting to changes in OSNR on one link by changing the modulation format of the affected flexpath (220 Gb/s), and adjusting the spectral location of the other flexpath (120 Gb/s) to maintain a defragmented spectrum.
RESUMO
We demonstrate a fully-reconfigurable fourth-order optical lattice filter built by cascading identical unit cells consisting of a Mach-Zehnder interferometer (MZI) and a ring resonator. The filter is fabricated using a commercial silicon complementary metal oxide semiconductor (CMOS) process and reconfigured by current injection into p-i-n diodes with a reconfiguration time of less than 10 ns. The experimental results show full control over the single unit cell pole and zero, switching the unit cell transfer function between a notch filter and a bandpass filter, narrowing the notch width down to 400 MHz, and tuning the center wavelength over the full free spectral range (FSR) of 10 GHz. Theoretical and experimental results show tuning dynamics and associated optical losses in the reconfigurable filters. The full-control of each of the four cascaded single unit cells resulted in demonstrations of a number of fourth-order transfer functions. The multimedia experimental data show live tuning and reconfiguration of optical lattice filters.
Assuntos
Filtração/instrumentação , Interferometria/instrumentação , Refratometria/instrumentação , Silício/química , Transistores Eletrônicos , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Spatial heterodyne spectrometers (SHS) can achieve high resolution with excellent optical throughput. We demonstrate a planar waveguide SHS incorporating 64 asymmetric Mach-Zehnder interferometers and show measurements that verify 1 GHz resolution across a 64 GHz measurement range.