RESUMO
In this study, we have intentionally grown novel types of (11-22)- and (1-10-3)-oriented(3) and self-assembled inclined GaN nanorods (NRs) on (10-10) m-sapphire substrates using metal organic chemical vapor deposition without catalysts and ex situ patterning. Nitridation of the m-sapphire surface was observed to be crucial to the inclined angle as well as the growth direction of the GaN NRs. Polarity-selective KOH etching confirmed that both (11-22) and (1-10-3) GaN NRs are nitrogen-polar. Using pole figure measurements and selective area electron diffraction patterns, the epitaxial relationship between the inclined (11-22) and (1-10-3) GaN NRs and m-sapphire substrates was systematically demonstrated. Furthermore, it was verified that the GaN NRs were single-crystalline wurtzite structures. We observed that stacking fault-related defects were generated during the initial growth stage using high-resolution transmission electron microscopy. The blue-shift of the near band edge (NBE) peak in the inclined angle-controlled GaN NRs can be explained by a band filling effect through carrier saturation of the conduction band, resulting from a high Si-doping concentration; in addition, the decay time of NBE emission in (11-22)- and (1-10-3)-oriented NRs was much shorter than that of stacking fault-related emission. These results suggest that defect-free inclined GaN NRs can be grown on m-sapphire without ex situ treatment.
RESUMO
The influence of thermal annealing on the properties of germanium grown on silicon (Ge-on-Si) has been investigated. Depth dependencies of strain and photoluminescence (PL) were compared for as-grown and annealed Ge-on-Si samples to investigate how intermixing affects the optical properties of Ge-on-Si. The tensile strain on thermally annealed Ge-on-Si increases at the deeper region, while the PL wavelength becomes shorter. This unexpected blue-shift is attributed to Si interdiffusion at the interface, which is confirmed by energy dispersive X-ray spectroscopy and micro-Raman experiments. Not only Γ- and L-valley emissions but also Δ2-valley related emission could be found from the PL spectra, showing a possibility of carrier escape from Γ valley. Temperature-dependent PL analysis reveals that the thermal activation energy of Γ-valley emission increases at the proximity of the Ge/Si interface. By comparing the PL peak energies and their activation energies, both SiGe intermixing and shallow defect levels are found to be responsible for the activation energy increase and consequent efficiency reduction at the Ge/Si interface. These results provide an in-depth understanding of the influence of strain and Si intermixing on the direct-bandgap optical transition in thermally annealed Ge-on-Si.
RESUMO
Warm and natural white light (i.e., with a correlated colour temperature <5000 K) with good colour rendition (i.e., a colour rendering index >75) is in demand as an indoor lighting source of comfortable interior lighting and mood lighting. However, for warm white light, phosphor-converted white light-emitting diodes (WLEDs) require a red phosphor instead of a commercial yellow phosphor (YAG:Ce3+), and suffer from limitations such as unavoidable energy conversion losses, degraded phosphors and high manufacturing costs. Phosphor-free WLEDs based on three-dimensional (3D) indium gallium nitride (InGaN)/gallium nitride (GaN) structures are promising alternatives. Here, we propose a new concept for highly efficient phosphor-free warm WLEDs using 3D core-shell InGaN/GaN dodecagonal ring structures, fabricated by selective area growth and the KOH wet etching method. Electrically driven, phosphor-free warm WLEDs were successfully demonstrated with a low correlated colour temperature (4500 K) and high colour rendering index (Ra = 81). From our findings, we believe that WLEDs based on dodecagonal ring structures become a platform enabling a high-efficiency warm white light-emitting source without the use of phosphors.
RESUMO
Improvements in the overall efficiency and significant reduction in the efficiency droop are observed in three-dimensional (3D) GaN truncated pyramid structures fabricated with air void and a SiO2 layer. This 3D structure was fabricated using a self-aligned twofold epitaxial lateral overgrowth technique, which improved both the internal quantum efficiency and the light extraction efficiency. In addition, a reduced leakage current was observed due to the effective suppression of threading dislocations. While this study focuses primarily on the blue emission wavelength region, this approach can also be applied to overcome the efficiency degradation problem in the ultraviolet, green, and red emission regions.
RESUMO
Control of the growth front in three-dimensional (3D) hexagonal GaN core structures is crucial for increased performance of light-emitting diodes (LEDs), and other photonic devices. This is due to the fact that InGaN layers formed on different growth facets in 3D structures exhibit various band gaps which originate from differences in the indium-incorporation efficiency, internal polarization, and growth rate. Here, a-plane {[Formula: see text] } facets, which are rarely formed in hexagonal pyramid based growth, are intentionally fabricated using mask patterns and adjustment of the core growth conditions. Moreover, the growth area covered by these facets is modified by changing the growth time. The origin of the formation of a-plane {[Formula: see text]} facets is also discussed. Furthermore, due to a growth condition transition from a 3D core structure to an InGaN multi-quantum well, a growth front transformation (i.e., a transformation of a-plane {[Formula: see text]} facets to semi-polar {[Formula: see text]} facets) is directly observed. Based on our understanding and control of this novel growth mechanism, we can achieve efficient broadband LEDs or photovoltaic cells.
RESUMO
As interest in anisotropic particles has increased in various research fields, methods of tracking such particles have become increasingly desirable. Here, we present a new and intuitive method to monitor the Brownian motion of a nanowire, which can construct and visualize multi-dimensional motion of a nanowire confined in an optical trap, using a dual particle tracking system. We measured the isolated angular fluctuations and translational motion of the nanowire in the optical trap, and determined its physical properties, such as stiffness and torque constants, depending on laser power and polarization direction. This has wide implications in nanoscience and nanotechnology with levitated anisotropic nanoparticles.
RESUMO
A critical issue in GaN-based high power light-emitting diodes (LEDs) is how to suppress the efficiency droop problem occurred at high current injection while improving overall quantum efficiency, especially in conventional c-plane InGaN/GaN quantum well (QW), without using complicated bandgap engineering or unconventional materials and structures. Although increasing thickness of each QW may decrease carrier density in QWs, formation of additional strain and defects as well as increased built-in field effect due to enlarged QW thickness are unavoidable. Here, we propose a facile and effective method for not only reducing efficiency droop but also improving quantum efficiency by utilizing c-plane InGaN/GaN QWs having thinner barriers and increased QW number while keeping the same single well thickness and total active layer thickness. As the barrier thickness decreases and the QW number increases, both internal electric field and carrier density within QWs are simultaneously reduced without degradation of material quality. Furthermore, we found overall improved efficiency and reduced efficiency droop, which was attributed to the decrease of the built-in field and to less influence by non-radiative recombination processes at high carrier density. This simple and effective approach can be extended further for high power ultraviolet, green, and red LEDs.
RESUMO
We report on the fabrication of novel InGaN nanowires (NWs) with improved crystalline quality and high radiative efficiency for applications as nanoscale visible light emitters. Pristine InGaN NWs grown under a uniform In/Ga molar flow ratio (UIF) exhibited multi-peak white-like emission and a high density of dislocation-like defects. A phase separation and broad emission with non-uniform luminescent clusters were also observed for a single UIF NW investigated by spatially resolved cathodoluminescence. Hence, we proposed a simple approach based on engineering the axial In content by increasing the In/Ga molar flow ratio at the end of NW growth. This new approach yielded samples with a high luminescence intensity, a narrow emission spectrum, and enhanced crystalline quality. Using time-resolved photoluminescence spectroscopy, the UIF NWs exhibited a long radiative recombination time (τr) and low internal quantum efficiency (IQE) due to strong exciton localization and carrier trapping in defect states. In contrast, NWs with engineered In content demonstrated three times higher IQE and a much shorter τr due to mitigated In fluctuation and improved crystal quality.