RESUMO
Realizing an efficient electron transfer process in the oxygen evolution reaction by modifying the electronic states around the Fermi level is crucial in developing high-performing and robust electrocatalysts1-3. Typically, electron transfer proceeds solely through either a metal redox chemistry (an adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (a lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level), without the concurrent occurrence of both metal and oxygen redox chemistries in the same electron transfer pathway1-15. Here we report an electron transfer mechanism that involves a switchable metal and oxygen redox chemistry in nickel-oxyhydroxide-based materials with light as the trigger. In contrast to the traditional AEM and LOM, the proposed light-triggered coupled oxygen evolution mechanism requires the unit cell to undergo reversible geometric conversion between octahedron (NiO6) and square planar (NiO4) to achieve electronic states (around the Fermi level) with alternative metal and oxygen characters throughout the oxygen evolution process. Utilizing this electron transfer pathway can bypass the potential limiting steps, that is, oxygen-oxygen bonding in AEM and deprotonation in LOM1-5,8. As a result, the electrocatalysts that operate through this route show superior activity compared with previously reported electrocatalysts. Thus, it is expected that the proposed light-triggered coupled oxygen evolution mechanism adds a layer of understanding to the oxygen evolution research scene.
RESUMO
Heterostructures may exhibit completely new physical properties that may be otherwise absent in their individual component materials. However, how to precisely grow or assemble desired complex heterostructures is still a significant challenge. In this work, the collision dynamics of a carbon nanotube and a boron nitride nanotube under different collision modes were investigated using the self-consistent-charge density-functional tight-binding molecular dynamics method. The energetic stability and electronic structures of the heterostructure after collision were calculated using the first-principles calculations. Five main collision outcomes are observed, that is, two nanotubes can (1) bounce back, (2) connect, (3) fuse into a defect-free BCN heteronanotube with a larger diameter, (4) form a heteronanoribbon of graphene and hexagonal boron nitride and (5) create serious damage after collision. It was found that both the BCN single-wall nanotube and the heteronanoribbon created by collision are the direct band-gap semiconductors with the band gaps of 0.808 eV and 0.544 eV, respectively. These results indicate that collision fusion is a viable method to create various complex heterostructures with new physical properties.
Assuntos
Nanotubos de Carbono , Nanotubos de Carbono/química , Boro/química , Compostos de Boro/química , Simulação de Dinâmica MolecularRESUMO
Two-dimensional (2D) molybdenum disulfide (MoS2) has attracted significant attention recently due to its direct bandgap semiconducting characteristics. Experimental studies on monolayer MoS2 show that S vacancy concentration varies greatly; while recent theoretical studies show that the formation energy of S vacancy is high and thus its concentration should be low. We perform density functional theory calculations to study the structures and energetics of vacancy and interstitial in both grain boundary (GB) and grain interior (GI) in monolayer MoS2 and uncover an anomalous formation pathway for dislocation-double S vacancy (V2S) complexes in MoS2. In this pathway, a (5|7) defect in an S-polar GB energetically favorably converts to a (4|6) defect, which possesses a duality: dislocation and double S vacancy. Its dislocation character allows it to glide into GI through thermal activation at high temperatures, bringing the double vacancy with it. Our findings here not only explain why VS is predominant in exfoliated 2D MoS2 and V2S is predominant in chemical vapor deposition (CVD)-grown 2D MoS2 but also reproduce GB patterns in CVD-grown MoS2. The new pathway for sulfur vacancy formation revealed here provides important insights and guidelines for controlling the quality of monolayer MoS2.
RESUMO
The process development and optimization of p-type semiconductors and p-channel thin-film transistors (TFTs) are essential for the development of high-performance circuits. In this study, the Br-doped CuI (CuIBr) TFTs are proposed by the solution process to control copper vacancy generation and suppress excess holes formation in p-type CuI films and improve current modulation capabilities for CuI TFTs. The CuIBr films exhibit a uniform surface morphology and good crystalline quality. The on/off current (ION/IOFF) ratio of CuIBr TFTs increased from 103 to 106 with an increase in the Br doping ratio from 0 to 15%. Furthermore, the performance and operational stability of CuIBr TFTs are significantly enhanced by indium tin oxide (ITO) surface charge-transfer doping. The results obtained from the first-principles calculations well explain the electron-doping effect of ITO overlayer in CuIBr TFT. Eventually, the CuIBr TFT with 15% Br content exhibits a high ION/IOFF ratio of 3 × 106 and a high hole field-effect mobility (µFE) of 7.0 cm2 V-1 s-1. The band-like charge transport in CuIBr TFT is confirmed by the temperature-dependent measurement. This study paves the way for the realization of transparent complementary circuits and wearable electronics.
RESUMO
We propose an atomically resolved approach to capture the spatial variations of the Schottky barrier height (SBH) at metal-semiconductor heterojunctions. This proposed scheme, based on atom-specific partial density of states (PDOS) calculations, further enables calculation of the effective SBH that aligns with conductance measurements. We apply this approach to study the variations of SBH at MoS2@Au heterojunctions, in which MoS2 contains conducting and semiconducting grain boundaries (GBs). Our results reveal that there are significant variations in SBH at atoms in the defected heterojunctions. Of particular interest is the fact that the SBH in some areas with extended defects approaches zero, indicating Ohmic contact. One important implication of this finding is that the effective SBH should be intrinsically dependent on the defect density and character. Remarkably, the obtained effective SBH values demonstrate good agreement with existing experimental measurements. Thus, the present study addresses two long-standing challenges associated with SBH in MoS2-metal heterojunctions: the wide variation in experimentally measured SBH values at MoS2@metal heterojunctions and the large discrepancy between density-functional-theory-predicted and experimentally measured SBH values. Our proposed approach points out a valuable pathway for understanding and manipulating SBHs at metal-semiconductor heterojunctions.
RESUMO
Cobalt oxyhydroxide (CoOOH) is a promising catalytic material for oxygen evolution reaction (OER). In the traditional CoOOH structure, Co3+ exhibits a low-spin state configuration ([Formula: see text]), with electron transfer occurring in face-to-face [Formula: see text] orbitals. In this work, we report the successful synthesis of high-spin state Co3+ CoOOH structure, by introducing coordinatively unsaturated Co atoms. As compared to the low-spin state CoOOH, electron transfer in the high-spin state CoOOH occurs in apex-to-apex [Formula: see text] orbitals, which exhibits faster electron transfer ability. As a result, the high-spin state CoOOH performs superior OER activity with an overpotential of 226 mV at 10 mA cm-2, which is 148 mV lower than that of the low-spin state CoOOH. This work emphasizes the effect of the spin state of Co3+ on OER activity of CoOOH based electrocatalysts for water splitting, and thus provides a new strategy for designing highly efficient electrocatalysts.
RESUMO
Rechargeable aqueous ion batteries (AIBs) play essential roles in the increasing demand for high-performance energy storage systems, and yet they are hampered by the lack of suitable cathode materials because of the sluggish intercalation kinetics. In this work, we develop an effective and feasible strategy to enhance the performance of AIBs by broadening the interlayer spacing by using intercalated CO2 molecules to promote the intercalation kinetics by using first principles simulations. Compared with pristine MoS2, the intercalation of CO2 molecules with a 3/4 ML coverage significantly increases the interlayer spacing to 9.383 Å from 6.369 Å and the diffusivity is boosted by 12 orders of magnitude for Zn ions, 13 orders for Mg ions and one order for Li ions. Moreover, the concentrations of intercalating Zn, Mg and Li ions are enhanced by 7, 1 and 5 orders of magnitude, respectively. The significantly increased diffusivity and intercalation concentration of metal ions signify that intercalating CO2 bilayer MoS2 is a promising cathode material to realize metal ion batteries with a rapid charging capability and high storage capacity. The strategy developed in this work can be generally applied to increase the metal ion storage capacity in transition metal dichalcogenide (TMD)- and other layered material-based cathodes and make them promising for next-generation rapidly rechargeable batteries.
RESUMO
Recently, the design of lightweight high entropy alloys (HEAs) with a mass density lower than 5 g/cm3 has attracted much research interest in structural materials. We applied a first principles-based high-throughput method to design lightweight HEAs in single solid-solution phase. Three lightweight quinary HEA families were studied: AlBeMgTiLi, AlBeMgTiSi and AlBeMgTiCu. By comprehensively exploring their entire compositional spaces, we identified the most promising compositions according to the following design criteria: the highest stability, lowest mass density, largest elastic modulus and specific stiffness, along with highest Pugh's ratio. We found that HEAs with the topmost compositions exhibit a negative formation energy, a low density and high specific Young's modulus, but a low Pugh's ratio. Importantly, we show that the most stable composition, Al0.31Be0.15Mg0.14Ti0.05Si0.35 is energetically more stable than its metallic compounds and it significantly outperforms the current lightweight engineering alloys such as the 7075 Al alloy. These results suggest that the designed lightweight HEAs can be energetically more stable, lighter, and stiffer but slightly less ductile compared to existing Al alloys. Similar conclusions can be also drawn for the AlBeMgTiLi and AlBeMgTiCu. Our design methodology and findings serve as a valuable tool and guidance for the experimental development of lightweight HEAs.
RESUMO
Understanding the relationship among elemental compositions, nanolamellar microstructures, and mechanical properties enables the rational design of high-entropy alloys (HEAs). Here, we construct nanolamellar AlxCoCuFeNi HEAs with alternating high- and low-Al concentration layers and explore their mechanical properties using a combination of molecular dynamic simulation and density functional theory calculation. Our results show that the HEAs with nanolamellar structures exhibit ideal plastic behavior during uniaxial tensile loading, a feature not observed in homogeneous HEAs. This remarkable ideal plasticity is attributed to the unique deformation mechanisms of phase transformation coupled with dislocation nucleation and propagation in the high-Al concentration layers and the confinement and slip-blocking effect of the low-Al concentration layers. Unexpectedly, this ideal plasticity is fully reversible upon unloading, leading to a remarkable shape memory effect. Our work highlights the importance of nanolamellar structures in controlling the mechanical and functional properties of HEAs and presents a fascinating route for the design of HEAs for both functional and structural applications.
RESUMO
A coupled oxygen evolution mechanism (COM) during oxygen evolution reaction (OER) has been reported in nickel oxyhydroxides (NiOOH)-based materials by realizing eg* band (3d electron states with eg symmetry) broadening and light irradiation. However, the link between the eg* band broadening extent and COM-based OER activities remains unclear. Here, Ni1-xFexOOH (x = 0, 0.05, 0,2) are prepared to investigate the underlying mechanism governing COM-based activities. It is revealed that in low potential region, realizing stronger eg* band broadening could facilitate the *OH deprotonation. Meanwhile, in high potential region where the photon utilization is the rate-determining step, a stronger eg* band broadening would widen the non-overlapping region between dz2 and a1g* orbitals, thereby enhancing photon utilization efficiency. Consequently, a stronger eg* band broadening could effectuate more efficient OER activities. Moreover, we demonstrate the universality of this concept by extending it to reconstruction-derived X-NiOOH (X = NiS2, NiSe2, Ni4P5) with varying extent of eg* band broadening. Such an understanding of the COM would provide valuable guidance for the future development of highly efficient OER electrocatalysts.
RESUMO
Free-standing and film-type moisture-driven energy generators (MEGs) that harness the preferential interaction of ionized moisture with hydrophilic materials are interesting because of their wearability and portability without needing a water container. However, most such MEGs work in limited humidity conditions, which provide a substantial moisture gradient. Herein, we present a high-performance MEG with sustainable power-production capability in a wide range of environments. The bilayer-based device comprises a negatively surface-charged, hydrophilic MXene (Ti3C2Tx) aerogel and polyacrylamide (PAM) ionic hydrogel. The preferential selection on the MXene aerogel of positive charges supplied from the salts and water in the hydrogel is predicted by the first-principle simulation, which results in a high electric output in a wide relative humidity range from 20% to 95%. Furthermore, by replacing the hydrogel with an organohydrogel of PAM that has excellent water retention and structural stability, a device with long-term electricity generation is realized for more than 15 days in a broad temperature range (from -20 to 80 °C). Our MXene aerogel MEGs connected in series supply sufficient power for commercial electronic components in various outdoor environments. Moreover, an MXene aerogel MEG works as a self-powered sensor for recognizing finger bending and facial expression.
RESUMO
Using DFT calculations, we investigate the effects of the type, location, and density of point defects in monolayer MoS2 on electronic structures and Schottky barrier heights (SBH) of Au/MoS2 heterojunction. Three types of point defects in monolayer MoS2, that is, S monovacancy, S divacancy and MoS (Mo substitution at S site) antisite defects, are considered. The following findings are revealed: (1) The SBH for the monolayer MoS2 with these defects is universally higher than that for its defect-free counterpart. (2) S divacancy and MoS antisite defects increase the SBH to a larger extent than S monovacancy. (3) A defect located in the inner sublayer of MoS2, which is adjacent to Au substrate, increases the SBH to a larger extent than that in the outer sublayer of MoS2. (4) An increase in defect density increases the SBH. These findings indicate a large variation of SBH with the defect type, location, and concentration. We also compare our results with previously experimentally measured SBH for Au/MoS2 contact and postulate possible reasons for the large differences among existing experimental measurements and between experimental measurements and theoretical predictions. The findings and insights revealed here may provide practical guidelines for modulation and optimization of SBH in Au/MoS2 and similar heterojunctions via defect engineering.
RESUMO
The interactions between moisture and materials give rise to the possibility of moisture-driven energy generation (MEG). Current MEG materials and devices only establish this interaction during water sorption in specific configurations, and conversion is eventually ceased by saturated water uptake. This paper reports an asymmetric hygroscopic structure (AHS) that simultaneously achieves energy harvesting and storage from moisture absorption. The AHS is constructed by the asymmetric deposition of a hygroscopic ionic hydrogel over a layer of functionalized carbon. Water absorbed from the air creates wet-dry asymmetry across the AHS and hence an in-plane electric field. The asymmetry can be perpetually maintained even after saturated water absorption. The absorbed water triggers the spontaneous development of an electrical double layer (EDL) over the carbon surface, which is termed a hygro-ionic process, accounting for the capacitive properties of the AHS. A peak power density of 70 µW cm-3 was realized after geometry optimization. The AHS shows the ability to be recharged either by itself owing to a self-regeneration effect or via external electrical means, which allows it to serve as an energy storage device. In addition to insights into moisture-material interaction, AHSs further shows potential for electronics powering in assembled devices.
RESUMO
Plasmons in strongly correlated systems are attracting considerable attention due to their unconventional behavior caused by electronic correlation effects. Recently, flat plasmons with nearly dispersionless frequency-wave vector relations have drawn significant interest because of their intriguing physical origin and promising applications. However, these flat plasmons exist primarily in low-dimensional materials with limited wave vector magnitudes (q < ~0.7 Å-1). Here, we show that long-lived flat plasmons can propagate up to ~1.2 Å-1 in α-Ti2O3, a strongly correlated three-dimensional Mott-insulator, with an ultra-small energy fluctuation (<40 meV). The strong correlation effect renormalizes the electronic bands near Fermi level with a small bandwidth, which is responsible for the flat plasmons in α-Ti2O3. Moreover, these flat plasmons are not affected by Landau damping over a wide range of wave vectors (q < ~1.2 Å-1) due to symmetry constrains on the electron wavefunctions. Our work provides a strategy for exploring flat plasmons in strongly correlated systems, which in turn may give rise to novel plasmonic devices in which flat and long-lived plasmons are desirable.
RESUMO
Realization of high-density and reliable resistive random access memories based on two-dimensional semiconductors is crucial toward their development in next-generation information storage and neuromorphic computing. Here, wafer-scale integration of solution-processed two-dimensional MoS2 memristor arrays are reported. The MoS2 memristors achieve excellent endurance, long memory retention, low device variations, and high analog on/off ratio with linear conductance update characteristics. The two-dimensional nanosheets appear to enable a unique way to modulate switching characteristics through the inter-flake sulfur vacancies diffusion, which can be controlled by the flake size distribution. Furthermore, the MNIST handwritten digits recognition shows that the MoS2 memristors can operate with a high accuracy of >98.02%, which demonstrates its feasibility for future analog memory applications. Finally, a monolithic three-dimensional memory cube has been demonstrated by stacking the two-dimensional MoS2 layers, paving the way for the implementation of two memristor into high-density neuromorphic computing system.
RESUMO
Moving forward from single atom catalysts, here we propose Cu mers coordinated with N atoms in graphene as a potential catalyst for hydrogen evolution reaction (HER) using first-principles calculations. Our study shows that Cu mers (monomer, dimer and trimer) with no N coordination adsorb H too strongly, whereas Cu mers with complete N coordination adsorb H too weakly, indicating that neither is catalytically active for HER. However, these results imply that Cu mers with partial N coordination may exhibit a better catalytic performance. Thus, we further explored all the Cu2N x complexes with different atomic coordination numbers and spatial distributions and find that one of the Cu2N4 atomic configurations possesses a ΔG H* of -0.09 eV, exhibiting a superior catalytic performance for HER. The possible reason might be that this configuration tunes the p-band center to an optimum level. Our study here reveals a promising catalyst for HER and presents a practical route to design catalysts by introducing metal mers and tuning their coordination with high-valence non-metal elements.
RESUMO
Using first-principles calculations, we investigated the changes in the lattice structure, electronic structures and catalytic performance for CO2 reduction reaction (CO2RR) of stanene under applied strain. Our calculations showed that the initial buckled honeycomb structure of free-standing stanene becomes increasingly flat upon the increase of tensile strain. Stanene remains its gapless semiconductor characteristic within the strain range of -2% and 2%, beyond which a semiconductor-to-metal transition occurs. Under strain, the adsorption of CO is weakened, which can facilitate the desorption of product CO, enabling a strained stanene to be a better catalyst for CO2RR to CO than strain-free stanene. In particular, the stanene with 4% strain may give rise to the best performance because of the weakest CO adsorption (Eadsorp= -0.15 eV). The adsorption of intermediate product COOH on stanene is tunable with strain. We also evaluated the overall catalytic performance of the strained stanene based on the adsorption of CO and COOH and the selectivity against HER. If the reduction of COOH is governed by adsorption of the intermediate, a 10% strain may give a stronger COOH adsorption, weaker CO adsorption and better selectivity against HER, leading to an enhanced catalytic performance for CO2RR to CO. On the other hand, if the reduction of COOH is governed by desorption, a tensile strain higher than 4% may result in an enhanced catalytic performance. Our study here suggests that strain-tuned stanene might serve as an optimal electrocatalyst for CO2RR to CO with a high activity and selectivity.
Assuntos
Dióxido de Carbono , Engenharia , Adsorção , Animais , Catálise , EletrônicaRESUMO
Simultaneously enhancing strength and ductility of metals and alloys has been a tremendous challenge. Here, we investigate a CoCuFeNiPd high-entropy alloy (HEA), using a combination of Monte Carlo method, molecular dynamic simulation, and density-functional theory calculation. Our results show that this HEA is energetically favorable to undergo short-range ordering (SRO), and the SRO leads to a pseudo-composite microstructure, which surprisingly enhances both the ultimate strength and ductility. The SRO-induced composite microstructure consists of three categories of clusters: face-center-cubic-preferred (FCCP) clusters, indifferent clusters, and body-center-cubic-preferred (BCCP) clusters, with the indifferent clusters playing the role of the matrix, the FCCP clusters serving as hard fillers to enhance the strength, while the BCCP clusters acting as soft fillers to increase the ductility. Our work highlights the importance of SRO in influencing the mechanical properties of HEAs and presents a fascinating route for designing HEAs to achieve superior mechanical properties.
RESUMO
High levels of humidity can induce thermal discomfort and consequent health disorders. However, proper utilization of this astounding resource as a freshwater source can aid in alleviating water scarcity. Herein, a low-energy and highly efficient humidity control system is reported comprising of an in-house developed desiccant dehumidifier and hygrometer (sensor), with an autonomous operation capability that can realize simultaneous dehumidification and freshwater production. The high efficiency and energy saving mainly come from the deployed super hygroscopic complex (SHC), which exhibits high water uptake (4.64 g g-1) and facile regeneration. Machine-learning-assisted in-house developed low cost and high precision hygrometers enable the autonomous operation of the humidity management system. The dehumidifier can reduce the relative humidity (RH) of a confined room from 75% to 60% in 15 minutes with energy consumption of 0.05 kWh, saving more than 60% of energy compared with the commercial desiccant dehumidifiers, and harvest 10 L of atmospheric water in 24 h. Moreover, the reduction in RH from 80% to 60% at 32 °C results in the reduction of apparent temperature by about 7 °C, thus effectively improving the thermal comfort of the inhabitants.
RESUMO
Vanadium-based oxide is widely investigated as a zinc ion battery (ZIB) cathode due to its ability to react reversibly with Zn2+. Despite its successful demonstration, modification with simple molecules has shown some promise in enhancing the performance of ZIBs. Thus, this presents an immense opportunity to explore simple molecules that can dramatically improve the electrochemical performance of electrodes. Thus, the effect of CO2 modification is studied in this work by decomposing oxalic acid within a hydrated V6O13 framework. Based on the collective results, the presence of CO2 drastically lowers the relative energy of Zn2+ diffusion through the pathways by forming weak electrostatic interactions between OCO2 and Zn2+. This leads to an enlarged diffusion contribution, which consequently results in enhanced stability and better rate performance. The as-synthesized CO2-V6O13 electrode delivers one of the highest specific capacities reported for vanadium-based oxides of ca. 471 mAh g-1. Furthermore, an excellent cyclic stability of 80% capacity retention after 4000 cycles at 2 A g-1 is recorded for CO2-V6O13, which suggests the importance of simple molecules in the material framework toward the enhancement of ZIB cathode performance.