A novel calibration method for portable X-ray fluorescence analysis of printed circuit boards.

Printed circuit boards (PCBs) are the most complex and valuable component of electronic devices, but only 34% of them are recycled in an environmentally sound manner. Improving the recycling rate and efficiency requires a fast, reliable and uncostly analytical method. Although the X-ray fluorescence (XRF) shows high potential, it is often unreliable. In this study, we propose a novel XRF methodology for the elemental analysis of PCBs, using the certified reference material (CRM) to decrease uncertainty and enhance accuracy. The results show significant improvement in robustness and accuracy of portable XRF(pXRF) analyses for elements Cu, Pb, Ni, As and Au, with a relative average inaccuracy of approximately 5% compared to referenced values. The methodology validation carried out by comparing pXRF and inductively coupled plasma mass spectroscopy analyses of personal computer motherboard samples shows no statistically significant difference for elements Cu, Cr and Ag. The study shows that the calibration of pXRF by CRMs enables the necessary analysis of PCBs in an efficient and reliable manner and could be also be applied to different types of PCBs and other electronic components, batteries or contaminated soil samples.

Characterization and source apportionment of microplastics in Indian composts.

Microplastics (MP), small plastic particles under 5 mm, are pollutants known to carry heavy metals in ecosystems. Composts are a significant source of soil microplastics. This study examined MSW composts from Kochi and Kozhikode in India for microplastic concentrations and heavy metals' accumulation thereon. Microplastics were isolated using zinc chloride density separation, with Fenton's reagent used for organic matter oxidation. Resin types were identified using FTIR analysis that showed the presence of PE, PP, PS, nylon, PET, and allyl alcohol copolymer. In Kozhikode's compost, the average concentration of microplastics was 840 ± 30 items/kg, while Kochi had 1600 ± 111 items/kg, mainly polyethylene films. PE was the most prevalent resin, comprising 58.3% in Kozhikode and 73.37% in Kochi. Heavy metal analysis of MP showed significant concentrations of lead, cadmium, zinc, copper, and manganese adsorbed on the surface of microplastics. The concentrations of heavy metals in the MP before Fenton oxidation ranged from 1.02 to 2.02 times the corresponding concentrations in compost for Kozhikode and 1.23 to 2.85 times for Kochi. Source apportionment studies revealed that 64% of microplastics in Kozhikode and 77% in Kochi originated from single-use plastics. Ecological risk indices, PLI and PHI, showed that composts from both locations fall under hazard level V. The study revealed that compost from unsegregated MSW can act as a significant source of microplastics and heavy metals in the soil environment, with single-use plastics contributing major share of the issue.

Investigations on inhibitory effects of nickel and cobalt salts on the decolorization of textile dyes by the white rot fungus Phanerochaete velutina.

Organic aromatic compounds used for dyeing and coloring in the textile industry are persistent and hazardous pollutants that must be treated before they are discharged into rivers and surface waters. Therefore, we investigated the potential of the white rot fungus Phanerochaete velutina to decolorize commonly used reactive dyes. The fungus decolorized in average 55% of Reactive Orange 16 (RO-16) after 14 days at a maximum rate of 0.09 d-1 and a half-life of 8 days. Furthermore, we determined the inhibitory effects of co-present inorganic contaminants Nickel (Ni) and Cobalt (Co) salts on the decolorization potential and determined IC50 values of 5.55 mg l-1 for Co and a weaker inhibition by Ni starting from a concentration of 20 mg l-1. In the decolorization assay for Remazol Brilliant Blue R (RBBR) we observed the interference of a metabolite of P. velutina, which did not allow us to investigate the kinetics of the reaction. The formation of the metabolite, however, could be used to obtain IC50 values of 3.37 mg l-1 for Co and 7.58 mg l-1 for Ni. Our results show that living white rot fungi, such as P. velutina, can be used for remediation of dye polluted wastewater, alternatively to enzyme mixtures, even in the co-presence of heavy metals.

Deceleration of the neurodegenerative phenotype in pyroglutamate-Aß accumulating transgenic mice by oral treatment with the Aß oligomer eliminating compound RD2.

Alzheimer's disease, a multifactorial incurable disorder, is mainly characterised by progressive neurodegeneration, extracellular accumulation of amyloid-ß protein (Aß), and intracellular aggregation of hyperphosphorylated tau protein. During the last years, Aß oligomers have been claimed to be the disease causing agent. Consequently, development of compounds that are able to disrupt already existing Aß oligomers is highly desirable. We developed d-enantiomeric peptides, consisting solely of d-enantiomeric amino acid residues, for the direct and specific elimination of toxic Aß oligomers. The drug candidate RD2 did show high oligomer elimination efficacy in vitro and the in vivo efficacy of RD2 was demonstrated in treatment studies by enhanced cognition in transgenic mouse models of amyloidosis. Here, we report on the in vitro and in vivo efficacy of the compound towards pyroglutamate-Aß, a particular aggressive Aß species. Using the transgenic TBA2.1 mouse model, which develops pyroglutamate-Aß(3-42) induced neurodegeneration, we are able to show that oral RD2 treatment resulted in a significant deceleration of the progression of the phenotype. The in vivo efficacy against this highly toxic Aß species further validates RD2 as a drug candidate for the therapeutic use in humans.

Analysis of anticoagulants for blood-based quantitation of amyloid ß oligomers in the sFIDA assay.

Early diagnostics at the preclinical stage of Alzheimer's disease is of utmost importance for drug development in clinical trials and prognostic guidance. Since soluble Aß oligomers are considered to play a crucial role in the disease pathogenesis, several methods aim to quantify Aß oligomers in body fluids such as cerebrospinal fluid (CSF) and blood plasma. The highly specific and sensitive method surface-based fluorescence intensity distribution analysis (sFIDA) has successfully been established for oligomer quantitation in CSF samples. In our study, we explored the sFIDA method for quantitative measurements of synthetic Aß particles in blood plasma. For this purpose, EDTA-, citrate- and heparin-treated blood plasma samples from five individual donors were spiked with Aß coated silica nanoparticles (Aß-SiNaPs) and were applied to the sFIDA assay. Based on the assay parameters linearity, coefficient of variation and limit of detection, we found that EDTA plasma yields the most suitable parameter values for quantitation of Aß oligomers in sFIDA assay with a limit of detection of 16 fM.

Experimental and simulated microplastics transport in saturated natural sediments: Impact of grain size and particle size.

Microplastics (MPs) present in terrestrial environments show potential leaching risk to deeper soil layers and aquifer systems, which threaten soil health and drinking water supply. However, little is known about the environmental fate of MPs in natural sediments. To examine the MPs transport mechanisms in natural sediments, column experiments were conducted using different natural sediments and MPs (10-150 µm) with conservative tracer. Particle breakthrough curves (BTCs) and retention profiles (RPs) were numerically interpreted in HYDRUS-1D using three different models to identify the most plausible deposition mechanism of MPs. Results show that the retention efficiency for a given particle size increased with decreasing grain size, and RPs exacerbated their hyper-exponential shape in finer sediments. Furthermore, the amounts of MPs present in the effluent increased to over 85 % as MPs size decreased to 10-20 µm in both gravel and coarse sand columns, while all larger MPs (125-150 µm) were retained in the coarse sand column. The modeling results suggested that the blocking mechanism becomes more important with increasing particle sizes. In particular, the attachment-detachment without blocking was the most suited parameterization to interpret the movement of small MPs, while a depth-dependent blocking approach was necessary to adequately describe the fate of larger particles.

Adding Rare Earth Oxide Markers to Polyoxymethylene to Improve Plastic Recycling through Tracer-Based Sorting.

Engineering plastics, such as polyoxymethylene (POM), are high-performance thermoplastics designed to withstand high temperature or mechanical stress and are used in electronic equipment, the automotive industry, construction, or specific household utensils. POM is immiscible with other plastics but due to a low volume of production, no methods were developed to separate it from the residual plastic waste stream. Therefore, POM recycling is minimal despite its high market value. This paper provides a proof of concept for tracer-based sorting (TBS) as a potential solution for increasing the separation efficiency of low-volume, high-quality polymers. For this purpose, yttrium oxide (Y2O3) and cerium (IV) oxide (CeO2) have been embedded into the POM matrix. Mechanical tests of samples at varying concentrations (0.1 to 1000 ppm) of both tracers were conducted, followed by an analysis of detectability and dispersibility using a portable X-ray fluorescence spectrometer (p-XRF), subsequently optimizing detection time and tracer concentration. Finally, an experimental scenario was developed to test the fate and potential recovery of the tracer material after the thermal treatment of plastics. A low detectable concentration, short measurement time, low influence on mechanical parameters of the compound, and low loss ratio after simulated recycling prove Y2O3 to be a suitable tracer for the industrial implementation of TBS.

The Impact of Abiotic and Biotic Conditions for Degradation Behaviors of Common Biodegradable Products in Stabilized Composts.

This work examines the influence of the degradation behaviors of biotic and abiotic conditions on three types of biodegradable products: cups from PLA and from cellulose, and plates from sugarcane. The main objective of this study was to evaluate if biodegradable products can be degraded in composts that were stabilized by backyard composting. Furthermore, the impact of crucial abiotic parameters (temperature and pH) for the degradation behaviors process was investigated. The changes in the biopolymers were analyzed by FTIR spectroscopy. This work confirmed that abiotic and biotic conditions are important for an effective disintegration of the investigated biodegradable products. Under abiotic conditions, the degradation behaviors of PLA were observable under both tested temperature (38 and 59 °C) conditions, but only at the higher temperature was complete disintegration observed after 6 weeks of incubation in mature compost. Moreover, our research shows that some biodegradable products made from cellulose also need additional attention, especially with respect to incorporated additives, as composting could be altered and optimal conditions in composting may not be achieved. This study shows that the disintegration of biodegradable products is a comprehensive process and requires detailed evaluation during composting. The results also showed that biodegradable products can also be degraded post composting and that microplastic pollution from biodegradable polymers in soil may be removed by simple physical treatments.

Carbon Monoxide Production during Bio-Waste Composting under Different Temperature and Aeration Regimes.

Despite the development of biorefinery processes, the possibility of coupling the "conventional" composting process with the production of biochemicals is not taken into account. However, net carbon monoxide (CO) production has been observed during bio-waste composting. So far, O2 concentration and temperature have been identified as the main variables influencing CO formation. This study aimed to investigate CO net production during bio-waste composting under controlled laboratory conditions by varying aeration rates and temperatures. A series of composting processes was carried out in conditions ranging from mesophilic to thermophilic (T = 35, 45, 55, and 65 °C) and an aeration rate of 2.7, 3.4, 4.8, and 7.8 L·h-1. Based on the findings of this study, suggestions for the improvement of CO production throughout the composting process have been developed for the first time. The highest concentrations of CO in each thermal variant was achieved with an O2 deficit (aeration rate 2.7 L·h-1); additionally, CO levels increased with temperature, reaching ~300 ppm at 65 °C. The production of CO in mesophilic and thermophilic conditions draws attention to biological CO formation by microorganisms capable of producing the CODH enzyme. Further research on CO production efficiency in these thermal ranges is necessary with the characterization of the microbial community and analysis of the ability of the identified bacteria to produce the CODH enzyme and convert CO from CO2.

The dynamics of macro- and microplastic quantity and size changes during the composting process.

The quantity and type of macro- and microplastics was investigated in rotting material during the composting process of two state-of-the-art composting plants in Austria. Microplastics >0.2 mm, were found already after the first turning event in both facilities. The generation of microplastics was more extensive in the plant that used shorter turning intervals during the first four weeks and generated approx. 21 particles per week and kg-1 DM. After 4 weeks of operation less microplastic particles were detected, which suggested that particles were fractionated to smaller sizes during processing. In addition, a total of nine composts from three different facilities that were operated in various settlement structures were compared. 7 to 232 macro- and microplastic particles per kg DM were found, whereas the highest plastic burden was observed in the composts made from biowaste that originated from the most densely populated area.

The use and detection of quantum dots as nanotracers in environmental fate studies of engineered nanoparticles.

Investigations of the behavior and effects of engineered nanoparticles (ENPs) on human health and the environment need detailed knowledge of their fate and transport in environmental compartments. Such studies are highly challenging due to low environmental concentrations, varying size distribution of the particles and the interference with the natural background. A strategy to overcome these limits is to use mimics of ENPs with unique detectable properties that match the properties of the ENPs as nanotracers. A special class of ENPs that can be tracked are quantum dots (QDs). QDs are composed of different metals, metalloids, or more recently also carbon (e.g., graphene), that result in unique optical properties. This allows the tracking of such particles by fluorescence microscopic and photometric techniques. Many types of QDs consist of heavy elements, allowing to track and visualize these particles also by electron microscopy and to quantitate the particles indirectly based on these elements. QDs can also be surface modified in various ways which enable them to be used as a label or as traceable mimics for ENPs. This review reflects a broad range of methods to synthesize and modify QDs based on metals, metalloids, and graphene for studying the environmental fate of nanoparticles and discusses and compares analytical methods that can be used for tracking and quantifying QDs. In addition, we review applications of QDs as ENP mimics in environmental studies of surface waters, soils, microorganisms, and plants with respect to the applied analytical techniques.

Oral treatment with the all-d-peptide RD2 enhances cognition in aged beagle dogs - A model of sporadic Alzheimer's disease.

Disease-modifying therapies to treat Alzheimer's disease (AD) are of fundamental interest for aging humans, societies, and health care systems. Predictable disease progression in transgenic AD models favors preclinical studies employing a preventive study design with an early pre-symptomatic treatment start, instead of assessing a truly curative approach with treatment starting after diagnosed disease onset. The aim of this study was to investigate the pharmacokinetic profile and efficacy of RD2 to enhance short-term memory and cognition in cognitively impaired aged Beagle dogs - a non-transgenic model of truly sporadic AD. RD2 has previously demonstrated pharmacodynamic efficacy in three different transgenic AD mouse models in three different laboratories. Here, we demonstrate that oral treatment with RD2 significantly reduced cognitive deficits in cognitively impaired aged Beagle dogs even beyond the treatment end, which suggests in combination with the treatment dependent CSF tau oligomer decrease a disease-modifying effect of RD2 treatment.

Evaluation of Marker Materials and Spectroscopic Methods for Tracer-Based Sorting of Plastic Wastes.

Plastics are a ubiquitous material with good mechanical, chemical and thermal properties, and are used in all industrial sectors. Large quantities, widespread use, and insufficient management of plastic wastes lead to low recycling rates. The key challenge in recycling plastic waste is achieving a higher degree of homogeneity between the different polymer material streams. Modern waste sorting plants use automated sensor-based sorting systems capable to sort out commodity plastics, while many engineering plastics, such as polyoxymethylene (POM), will end up in mixed waste streams and are therefore not recycled. A novel approach to increasing recycling rates is tracer-based sorting (TBS), which uses a traceable plastic additive or marker that enables or enhances polymer type identification based on the tracer's unique fingerprint (e.g., fluorescence). With future TBS applications in mind, we have summarized the literature and assessed TBS techniques and spectroscopic detection methods. Furthermore, a comprehensive list of potential tracer substances suitable for thermoplastics was derived from the literature. We also derived a set of criteria to select the most promising tracer candidates (3 out of 80) based on their material properties, toxicity profiles, and detectability that could be applied to enable the circularity of, for example, POM or other thermoplastics.

Method to determine the decolorization potential of persistent dyes by white rot fungi by colorimetric assays.

Decolorization assays allow to assess the ability of white rot fungi to degrade persistent organic molecules such as textile dyes and can contribute to discover microorganisms that can be used for bioremediation. The decolorization can be overlayed by the absorption from metabolites that are produced by fungi during screening, which interfere with the results. To compensate for this interference a method was developed by using different controls to subtract interfering signals. The method was designed for simple screening in multiwell plates that can be operated with a plate reader. It was applied to four different textile dyes (Reactive Black 5, Reactive Blue 4, Reactive Green 19, and Reactive Orange 16) that were degraded by the white rot fungus Phanerochaete velutina. The four textile dyes showed different results with a different degree of interference. The controls allow to compensate for interfering signals and to calculate kinetic parameters for the decolorization reaction and the enzymatic degradation.•Determine the non-enzymatic degradation of the dyes in experiments without fungi.•Determine the absorbance of metabolites and subtract it from the decolorization data to obtain the degradation of the dye.•Determine kinetic parameters of the degradation to compare the efficiency of the enzymes towards dyes.

The current state of the art in internal additive materials and quantum dots for improving efficiency and stability against humidity in perovskite solar cells.

The remarkable optoelectronic capabilities of perovskite structures enable the achievement of astonishingly high-power conversion efficiencies on the laboratory scale. However, a critical bottleneck of perovskite solar cells is their sensitivity to the surrounding humid environment affecting drastically their long-term stability. Internal additive materials together with surface passivation, polymer-mixed perovskite, and quantum dots, have been investigated as possible strategies to enhance device stability even in unfavorable conditions. Quantum dots (QDs) in perovskite solar cells enable power conversion efficiencies to approach 20%, making such solar cells competitive to silicon-based ones. This mini-review summarized the role of such QDs in the perovskite layer, hole-transporting layer (HTL), and electron-transporting layer (ETL), demonstrating the continuous improvement of device efficiencies.

Aß oligomer concentration in mouse and human brain and its drug-induced reduction ex vivo.

The elimination of amyloid beta (Aß) oligomers is a promising strategy for therapeutic drug development of Alzheimer's disease (AD). AD mouse models that develop Aß pathology have been used to demonstrate in vivo efficacy of compounds that later failed in clinical development. Here, we analyze the concentration and size distribution of Aß oligomers in different transgenic mouse models of AD and in human brain samples by surface-based fluorescence intensity distribution analysis (sFIDA), a highly sensitive method for detecting and quantitating protein aggregates. We demonstrate dose- and time-dependent oligomer elimination by the compound RD2 in mouse and human AD brain homogenates as sources of native Aß oligomers. Such ex vivo target engagement analyses with mouse- and human-brain-derived oligomers have the potential to enhance the translational value from pre-clinical proof-of-concept studies to clinical trials.

Electrochemical control of adsorption dynamics of surface layer proteins on gold.

The kinetics and mechanism of the adsorption of the surface layer proteins of Lysinibacillus sphaericus CCM2177 on gold depend on the charging conditions of the electrochemical double layer and the addition of Ca(2+) ions. The electrical and mass charging was monitored by an in situ electrochemical quartz microbalance. Adsorption and monolayer formation of the protein molecules occur in the positive potential region where solvated anions form the electrochemical double layer. The crystalline character of the surface layer was diagnosed by an atomic force microscope. Negative of the point of zero charge, multilayer island structures were found.

Structural control of surface layer proteins at electrified interfaces investigated by in situ Fourier transform infrared spectroscopy.

In situ Fourier Transform Infrared (FTIR) Spectroscopy complemented by Electrochemical Quartz Microbalance (EQMB) investigations allowed a detailed insight into the influence of the electrode potential on competing adsorption processes and bonding mechanisms of buffer ions and S-layer protein molecules of Lysinibacillus sphaericus CCM2177 at an electrified liquid/gold interface. The S-layer proteins adsorb on gold polarized positively of the point of zero charge by displacing perchlorate anions in the Helmholtz plane by their carboxylate groups. This is indicated by an increase of the peptide and carboxylate infrared absorption signals accompanied by a decrease of the perchlorate signal. S-layers interlinked laterally with Ca(2+) ions, positive of the point of zero charge, resulted in the formation of a crystalline layer participating in the Helmholtz layer. In contrast to the absence of the Ca(2+)-linkers, S-layers remain structurally intact also in the negative polarization domain where the Helmholtz layer is solely sustained by mainly solvated cations without participation of the negatively charged protein carboxylate functions.

Carbonized Solid Fuel Production from Polylactic Acid and Paper Waste Due to Torrefaction.

The quantity of biodegradable plastics is increasing steadily and taking a larger share in the residual waste stream. As the calorific value of biodegradable plastic is almost two-fold lower than that of conventional ones, its increasing quantity decreases the overall calorific value of municipal solid waste and refuse-derived fuel which is used as feedstock for cement and incineration plants. For that reason, in this work, the torrefaction of biodegradable waste, polylactic acid (PLA), and paper was performed for carbonized solid fuel (CSF) production. In this work, we determined the process yields, fuel properties, process kinetics, theoretical energy, and mass balance. We show that the calorific value of PLA cannot be improved by torrefaction, and that the process cannot be self-sufficient, while the calorific value of paper can be improved up to 10% by the same process. Moreover, the thermogravimetric analysis revealed that PLA decomposes in one stage at ~290-400 °C with a maximum peak at 367 °C, following a 0.42 reaction order with the activation energy of 160.05 kJ·(mol·K)-1.

Constitutive activation of integrin αvß3 contributes to anoikis resistance of ovarian cancer cells.

Epithelial ovarian cancer involves the shedding of single tumor cells or spheroids from the primary tumor into ascites, followed by their survival, and transit to the sites of metastatic colonization within the peritoneal cavity. During their flotation, anchorage-dependent epithelial-type tumor cells gain anoikis resistance, implicating integrins, including αvß3. In this study, we explored anoikis escape, cisplatin resistance, and prosurvival signaling as a function of the αvß3 transmembrane conformational activation state in cells suspended in ascites. A high-affinity and constitutively signaling-competent αvß3 variant, which harbored unclasped transmembrane domains, was found to confer delayed anoikis onset, enhanced cisplatin resistance, and reduced cell proliferation in ascites or 3D-hydrogels, involving p27kip upregulation. Moreover, it promoted EGF-R expression and activation, prosurvival signaling, implicating FAK, src, and PKB/Akt. This led to the induction of the anti-apoptotic factors Bcl-2 and survivin suppressing caspase activation, compared to a signaling-incapable αvß3 variant displaying firmly associated transmembrane domains. Dissecting the mechanistic players for αvß3-dependent survival and peritoneal metastasis of ascitic ovarian cancer spheroids is of paramount importance to target their anchorage independence by reversing anoikis resistance and blocking αvß3-triggered prosurvival signaling.