Comparing the use of conventional and three-dimensional printing (3DP) in mandibular reconstruction.

BACKGROUND: There are a number of clinical disorders that require mandibular reconstruction (MR). Novel three-dimensional (3D) printing technology enables reconstructions to be more accurate and beneficial to the patient. However, there is currently no evidence identifying which techniques are better suited for MR, based on the type of clinical disorder the patient has. In this study, we aim to compare 3D techniques with conventional techniques to identify how best to reconstruct the mandible based on the clinical cause that necessitates the reconstructive procedure: cancerous or benign tumours, clinical disorders, infection or disease and trauma or injury. METHODS: PubMed, Scopus, Embase and Medline were searched to identify relevant papers that outline the clinical differences between 3D and conventional techniques in MR. Data were evaluated to provide a clear outline of suitable techniques for surgery. RESULTS: 20 of 2749 papers met inclusion criteria. These papers were grouped based on the clinical causes that required MR into four categories: malignant or benign tumour resection; mandibular trauma/injury and other clinical disorders. CONCLUSIONS: The majority of researchers favoured 3D techniques in MR. However, due to a lack of standardised reporting in these studies it was not possible to determine which specific techniques were better for which clinical presentations.

The application of 3D printing in preoperative planning for transcatheter aortic valve replacement: a systematic review.

BACKGROUND: Recently, transcatheter aortic valve replacement (TAVR) has been suggested as a less invasive treatment compared to surgical aortic valve replacement, for patients with severe aortic stenosis. Despite the attention, persisting evidence suggests that several procedural complications are more prevalent with the transcatheter approach. Consequently, a systematic review was undertaken to evaluate the application of three-dimensional (3D) printing in preoperative planning for TAVR, as a means of predicting and subsequently, reducing the incidence of adverse events. METHODS: MEDLINE, Web of Science and Embase were searched to identify studies that utilised patient-specific 3D printed models to predict or mitigate the risk of procedural complications. RESULTS: 13 of 219 papers met the inclusion criteria of this review. The eligible studies have shown that 3D printing has most commonly been used to predict the occurrence and severity of paravalvular regurgitation, with relatively high accuracy. Studies have also explored the usefulness of 3D printed anatomical models in reducing the incidence of coronary artery obstruction, new-onset conduction disturbance and aortic annular rapture. CONCLUSION: Patient-specific 3D models can be used in pre-procedural planning for challenging cases, to help deliver personalised treatment. However, the application of 3D printing is not recommended for routine clinical practice, due to practicality issues.

Impact of heterotopic ossification following lumbar total disk replacement: a systematic review.

BACKGROUND CONTEXT: Lumbar total disc replacement (TDR) is an alternative to lumbar fusion in the treatment of lower back pain and reduces the risk of adjacent segment degeneration. Heterotopic ossification (HO) has been identified as a common complication following lumbar TDR. PURPOSE: This systematic review aims to determine the prevalence, risk factors and clinical and radiological impact of HO following lumbar TDR. STUDY DESIGN: Systematic Review. METHODS: MEDLINE, Scopus, PubMed and Cochrane Central were searched for articles that referred to lumbar TDR and HO. The hits were assessed against inclusion and exclusion criteria. Data from each included study was extracted and analysed with respect to the study aims. RESULTS: Twenty-six studies were included in this review and the pooled prevalence of HO was estimated to be between 13.2% (participants) and 15.3% (vertebral levels). TDR clinical outcomes were not found to be reduced by HO and there was insufficient data to identify a given impact upon radiological outcomes. Age and follow up time were identified as potential risk factors for HO. CONCLUSIONS: This review was hampered by inconsistencies in the reporting of HO across the studies. We therefore recommend that a set of guidelines should be produced to aid future researchers and reduce the risk of bias.

Effects of short-term administration of melatonin before gonadectomy on oxidative stress, cortisol and sex hormones in male dogs.

The aim of this study was to investigate gonadectomy stress, steroid hormones and serotonin in male dogs treated with melatonin before gonadectomy. Twenty-five mixed breed adult dogs were divided into five equal groups. The melatonin and melatonin + gonadectomized groups received melatonin treatment (3 mg/10 Kg, PO, TID) the day before gonadectomy; the gonadectomized and anaesthesia groups did not receive melatonin; and the control group just received the melatonin vehicle. Blood sampling was performed before melatonin administration (day -1) and on days 0 (gonadectomy), 1, 3 and 6 after gonadectomy. Superoxide dismutase and glutathione peroxidase concentrations decreased significantly in gonadectomized dogs compared with dogs treated with melatonin before gonadectomy and intact dogs. Gonadectomy led to a significant decrease in catalase concentration in gonadectomized dogs compared with other study groups. Malondialdehyde levels increased significantly in gonadectomized dogs compared with other groups. Melatonin administration before gonadectomy led to decreased malondialdehyde concentration in gonadectomized and intact dogs compared to the control group. Cortisol concentration increased significantly in gonadectomized dogs compared to the control dogs. Serotonin levels decreased in gonadectomized dogs, but melatonin treatment increased serotonin concentration in gonadectomized and intact dogs. Melatonin treatment before gonadectomy suppressed oxidative stress and the cortisol but increased serotonin level.

Differential localization patterns of claudin 10, 16, and 19 in human, mouse, and rat renal tubular epithelia.

Functional properties of the paracellular pathway depend critically on the set of claudins (CLDN) expressed at the tight junction. Two syndromes are causally linked to loss-of-function mutations of claudins: hypohidrosis, electrolyte imbalance, lacrimal gland dysfunction, ichthyosis, and xerostomia (HELIX) syndrome caused by genetic variations in the CLDN10 gene and familial hypomagnesemia with hypercalciuria and nephrocalcinosis caused by genetic variations in the CLDN16 or CLDN19 genes. All three genes are expressed in the kidney, particularly in the thick ascending limb (TAL). However, localization of these claudins in humans and rodents remains to be delineated in detail. We studied the segmental and subcellular expression of CLDN10, CLDN16, and CLDN19 in both paraffin-embedded and frozen kidney sections from the adult human, mouse, and rat using immunohistochemistry and immunofluorescence, respectively. Here, CLDN10 was present in a subset of medullary and cortical TAL cells, localizing to basolateral domains and tight junctions in human and rodent kidneys. Weak expression was detected at the tight junction of proximal tubular cells. CLDN16 was primarily expressed in a subset of TAL cells in the cortex and outer stripe of outer medulla, restricted to basolateral domains and tight junctional structures in both human and rodent kidneys. CLDN19 predominantly colocalized with CLDN16 in tight junctions and basolateral domains of the TAL but was also found in basolateral and junctional domains in more distal sites. CLDN10 expression at tight junctions almost never overlapped with that of CLND16 and CLDN19, consistent with distinct junctional pathways with different permeation profiles in both human and rodent kidneys.NEW & NOTEWORTHY This study used immunohistochemistry and immunofluorescence to investigate the distribution of claudin 10, 16, and 19 in the human, mouse, and rat kidney. The findings showed distinct junctional pathways in both human and rodent kidneys, supporting the existence of different permeation profiles in all species investigated.

Assessing demographic access to hip replacement surgery in the United Kingdom: a systematic review.

Persisting evidence suggests significant socioeconomic and sociodemographic inequalities in access to medical treatment in the UK. Consequently, a systematic review was undertaken to examine these access inequalities in relation to hip replacement surgery. Database searches were performed using MEDLINE, PubMed and Web of Science. Studies with a focus on surgical need, access, provision and outcome were of interest. Inequalities were explored in the context of sociodemographic characteristics, socioeconomic status (SES), geographical location and hospital-related variables. Only studies in the context of the UK were included. Screening of search and extraction of data were performed and 482 articles were identified in the database search, of which 16 were eligible. Eligible studies consisted of eight cross-sectional studies, seven ecological studies and one longitudinal study. Although socioeconomic inequality has somewhat decreased, lower SES patients and ethnic minority patients demonstrate increased surgical needs, reduced access and poor outcomes. Lower SES and Black minority patients were younger and had more comorbidities. Surgical need increased with age. Women had greater surgical need and provision than men. Geographical inequality had reduced in Scotland, but a north-south divide persists in England. Rural areas received greater provision relative to need, despite increased travel for care. In all, access inequalities remain widespread and policy change driven by research is needed.

Unraveling electronic band structure of narrow-bandgap p-n nanojunctions in heterostructured nanowires.

The electronic band structure of complex nanostructured semiconductors has a considerable effect on the final electronic and optical properties of the material and, ultimately, on the functionality of the devices incorporating them. Valence electron energy-loss spectroscopy (VEELS) in the transmission electron microscope (TEM) provides the possibility of measuring this property of semiconductors with high spatial resolution. However, it still represents a challenge for narrow-bandgap semiconductors, since an electron beam with low energy spread is required. Here we demonstrate that by means of monochromated VEELS we can study the electronic band structure of narrow-gap materials GaSb and InAs in the form of heterostructured nanowires, with bandgap values down to 0.5 eV, especially important for newly developed structures with unknown bandgaps. Using complex heterostructured InAs-GaSb nanowires, we determine a bandgap value of 0.54 eV for wurtzite InAs. Moreover, we directly compare the bandgaps of wurtzite and zinc blende polytypes of GaSb in a single nanostructure, measured here as 0.84 and 0.75 eV, respectively. This allows us to solve an existing controversy in the band alignment between these structures arising from theoretical predictions. The findings demonstrate the potential of monochromated VEELS to provide a better understanding of the band alignment at the heterointerfaces of narrow-bandgap complex nanostructured materials with high spatial resolution. This is especially important for semiconductor device applications where even the slightest variations of the electronic band structure at the nanoscale can play a crucial role in their functionality.

Critical evaluation of stents in coronary angioplasty: a systematic review.

BACKGROUND: Coronary stents are routinely placed in the treatment and prophylaxis of coronary artery disease (CAD). Current coronary stent designs are prone to developing blockages: in-stent thrombosis (IST) and in-stent re-stenosis (ISR). This is a systematic review of the design of current coronary stent models, their structural properties and their modes of application, with a focus on their associated risks of IST and ISR. The primary aim of this review is to identify the best stent design features for reducing the risk of IST and ISR. To review the three major types of stents used in clinical settings today, determining best and relevant clinical practice by exploring which types and features of offer improved patient outcomes regarding coronary angioplasty. This information can potentially be used to increase the success rate of coronary angioplasty and stent technology in the future taking into account costs and benefits. METHODS: Scientific databases were searched to find studies concerning stents. After the exclusion criteria were applied, 19 of the 3192 searched literature were included in this review. Studies investigating three major types of stent design were found: bare-metal stents (BMS), drug-eluting stents (DES) and bioresorbable stents (BRS). The number of participants varied between 14 and 1264. On average 77.4% were male, with a mean age of 64 years. RESULTS: From the findings of these studies, it is clear that DES are superior in reducing the risk of ISR when compared to BMS. Conflicting results do not clarify whether BRS are superior to DES at reducing IST occurrence, although studies into newer BRS technologies show reducing events of IST to 0, creating a promising future for BRS showing them to be non-inferior. Thinner stents were shown to reduce IST rates, due to better re-endothelialisation. Scaffold material has also been shown to play a role with cobalt alloy stents reducing the risk of IST. This study found that thinner stents that release drugs were better at preventing re-blockages. Some dissolvable stents might be better at stopping blood clots blocking the arteries when compared to metal stents. The method and procedure of implanting the stent during coronary angioplasty influences success rate of these stents, meaning stent design is not the only significant factor to consider. CONCLUSIONS: Positive developments in coronary angioplasty could be made by designing new stents that encompass all the most desirable properties of existing stent technology. Further work is needed to investigate the benefits of BRS in reducing the risk of IST compared to DES, as well as to investigate the effects of different scaffold materials on IST and ISR outcomes.

Sustainable waste management of medical waste in African developing countries: A narrative review.

Africa is the second populous continent, and its population has the fastest growing rate. Some African countries are still plagued by poverty, poor sanitary conditions and limited resources, such as clean drinking water, food supply, electricity, and effective waste management systems. Underfunded healthcare systems, poor training and lack of awareness of policies and legislations on handling medical waste have led to increased improper handling of waste within hospitals, healthcare facilities and transportation and storage of medical waste. Some countries, including Ethiopia, Botswana, Nigeria and Algeria, do not have national guidelines in place to adhere to the correct disposal of such wastage. Incineration is often the favoured disposal method due to the rapid diminishment of up to 90% of waste, as well as production of heat for boilers or for energy production. This type of method - if not applying the right technologies - potentially creates hazardous risks of its own, such as harmful emissions and residuals. In this study, the sustainability aspects of medical waste management in Africa were reviewed to present resilient solutions for health and environment protection for the next generation in Africa. The findings of this research introduce policies, possible advices and solutions associated with sustainability and medical waste management that can support decision-makers in developing strategies for the sustainability by using the eco-friendly technologies for efficient medical waste treatment and disposal methods and also can serve as a link between the healthcare system, decision-makers, and stakeholders in developing health policies and programmes.

The Role of Polarity in Nonplanar Semiconductor Nanostructures.

The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III-V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II-VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures.

The epithelial Na+ channel α- and γ-subunits are cleaved at predicted furin-cleavage sites, glycosylated and membrane associated in human kidney.

The epithelial Na+ channel (ENaC) is essential for Na+/K+ homeostasis and blood pressure control. Its activity is regulated by proteases in rodents. To gain more information on proteolytic ENaC regulation in humans, we tested the hypotheses that (1) human kidney α- and γ-ENaC subunits are furin-cleaved, glycosylated, and altered by medication that change plasma aldosterone; (2) prostasin-cleaved γ-ENaC is increased in proteinuria, and (3) cleaved ENaC moieties prevail at the membranes and in urinary extracellular vesicles (uEVs). We developed three monoclonal antibodies (mAbs) targeting (1) the neo-epitope generated after furin cleavage in γ-ENaC (mAb-furin); (2) the intact prostasin cleavage-site in γ-ENaC (mAb-intactRKRK), and (3) the α-ENaC subunit (mAb-alpha). Nephrectomy tissue and uEVs were used for immunoblotting and -histochemistry. In human kidney tissue, mAb-furin detected a ≈ 65-70 kDa protein, compatible with furin-cleaved γ-ENaC; mAb-intactRKRK detected full-length (≈ 90-100 kDa) and furin-cleaved (≈ 70-75 kDa) γ-ENaC. mAb-alpha detected a ≈ 50 kDa protein compatible with furin-cleaved α-subunit. Furin-cleaved γ-ENaC was detected predominantly within membrane fractions and deglycosylation shifted full-length γ-ENaC migration ~ 20 kDa. While γ-ENaC uEV levels were below the detection limit, α-ENaC migrated as intact (≈ 75 kDa) and furin-cleaved (≈ 50 kDa) in uEVs. Kidney levels of α- and γ-ENaC in diuretic- (n = 3) and ACE-inhibitor-treated (n = 4) patients were not different from controls (n = 4). Proteinuric patients (n = 6) displayed similar level of furin-cleaved γ-ENaC as controls (n = 4). Cleaved α-ENaC abundance was significantly lower in the kidneys from proteinuria patients. In conclusion, the study demonstrates ENaC cleavage as an event in human kidney that could contribute to physiological regulation and pathophysiological activation of ENaC.

Nephrotic syndrome is associated with increased plasma K+ concentration, intestinal K+ losses, and attenuated urinary K+ excretion: a study in rats and humans.

The present study tested the hypotheses that nephrotic syndrome (NS) leads to renal K+ loss because of augmented epithelial Na+ channel (ENaC) activity followed by downregulation of renal K+ secretory pathways by suppressed aldosterone. The hypotheses were addressed by determining K+ balance and kidney abundance of K+ and Na+ transporter proteins in puromycin aminonucleoside (PAN)-induced rat nephrosis. The effects of amiloride and angiotensin II type 1 receptor and mineralocorticoid receptor (MR) antagonists were tested. Glucocorticoid-dependent MR activation was tested by suppression of endogenous glucocorticoid with dexamethasone. Urine and plasma samples were obtained from pediatric patients with NS in acute and remission phases. PAN-induced nephrotic rats had ENaC-dependent Na+ retention and displayed lower renal K+ excretion but elevated intestinal K+ secretion that resulted in less cumulated K+ in NS. Aldosterone was suppressed at day 8. The NS-associated changes in intestinal, but not renal, K+ handling responded to suppression of corticosterone, whereas angiotensin II type 1 receptor and MR blockers and amiloride had no effect on urine K+ excretion during NS. In PAN-induced nephrosis, kidney protein abundance of the renal outer medullary K+ channel and γ-ENaC were unchanged, whereas the Na+-Cl- cotransporter was suppressed and Na+-K+-ATPase increased. Pediatric patients with acute NS displayed suppressed urine Na+-to-K+ ratios compared with remission and elevated plasma K+ concentration, whereas fractional K+ excretion did not differ. Acute NS is associated with less cumulated K+ in a rat model, whereas patients with acute NS have elevated plasma K+ and normal renal fractional K+ excretion. In NS rats, K+ balance is not coupled to ENaC activity but results from opposite changes in renal and fecal K+ excretion with a contribution from corticosteroid MR-driven colonic secretion.

Understanding semiconductor nanostructures via advanced electron microscopy and spectroscopy.

Transmission electron microscopy (TEM) offers an ample range of complementary techniques which are able to provide essential information about the physical, chemical and structural properties of materials at the atomic scale, and hence makes a vast impact on our understanding of materials science, especially in the field of semiconductor one-dimensional (1D) nanostructures. Recent advancements in TEM instrumentation, in particular aberration correction and monochromation, have enabled pioneering experiments in complex nanostructure material systems. This review aims to address these understandings through the applications of the methodology for semiconductor nanostructures. It points out various electron microscopy techniques, in particular scanning TEM (STEM) imaging and spectroscopy techniques, with their already-employed or potential applications on 1D nanostructured semiconductors. We keep the main focus of the paper on the electronic and optoelectronic properties of such semiconductors, and avoid expanding it further. In the first part of the review, we give a brief introduction to each of the STEM-based techniques, without detailed elaboration, and mention the recent technological and conceptual developments which lead to novel characterization methodologies. For further reading, we refer the audience to a handful of papers in the literature. In the second part, we highlight the recent examples of application of the STEM methodology on the 1D nanostructure semiconductor materials, especially III-V, II-V, and group IV bare and heterostructure systems. The aim is to address the research questions on various physical properties and introduce solutions by choosing the appropriate technique that can answer the questions. Potential applications will also be discussed, the ones that have already been used for bulk and 2D materials, and have shown great potential and promise for 1D nanostructure semiconductors.

Atomic-Resolution Spectrum Imaging of Semiconductor Nanowires.

Over the past decade, III-V heterostructure nanowires have attracted a surge of attention for their application in novel semiconductor devices such as tunneling field-effect transistors (TFETs). The functionality of such devices critically depends on the specific atomic arrangement at the semiconductor heterointerfaces. However, most of the currently available characterization techniques lack sufficient spatial resolution to provide local information on the atomic structure and composition of these interfaces. Atomic-resolution spectrum imaging by means of electron energy-loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM) is a powerful technique with the potential to resolve structure and chemical composition with sub-angstrom spatial resolution and to provide localized information about the physical properties of the material at the atomic scale. Here, we demonstrate the use of atomic-resolution EELS to understand the interface atomic arrangement in three-dimensional heterostructures in semiconductor nanowires. We observed that the radial interfaces of GaSb-InAs heterostructure nanowires are atomically abrupt, while the axial interface in contrast consists of an interfacial region where intermixing of the two compounds occurs over an extended spatial region. The local atomic configuration affects the band alignment at the interface and, hence, the charge transport properties of devices such as GaSb-InAs nanowire TFETs. STEM-EELS thus represents a very promising technique for understanding nanowire physical properties, such as differing electrical behavior across the radial and axial heterointerfaces of GaSb-InAs nanowires for TFET applications.

Kinetic Engineering of Wurtzite and Zinc-Blende AlSb Shells on InAs Nanowires.

Using AlSb as the model system, we demonstrate that kinetic limitations can lead to the preferential growth of wurtzite (WZ) AlSb shells rather than the thermodynamically stable zinc-blende (ZB) AlSb and that the WZ and ZB relative thickness can be tuned by a careful control of the deposition parameters. We report selective heteroepitaxial radial growth of AlSb deposited by metal-organic vapor phase epitaxy (MOVPE) on InAs nanowire core templates with engineered lengths of axial WZ and ZB segments. AlSb shell thickness, crystal phase, nanostructure, and composition are investigated as a function of the shell growth temperature, Ts, using scanning electron microscopy, transmission electron microscopy, electron tomography, and energy-dispersive X-ray spectroscopy. We find that ZB- and WZ-structured AlSb shells grow heteroepitaxially around the ZB and WZ segments of the InAs core, respectively. Surprisingly, at 390 < Ts < 450 °C, the WZ-AlSb shells are thicker than the ZB-AlSb shells, and their thickness increases with decreasing Ts. In comparison, the ZB-AlSb shell thicknesses increase slightly with increasing Ts. We find that the increased thickness of the WZ-AlSb shells is due to the formation and enhanced deposition on {112̅0} facets rather than on the more commonly grown {101̅0} sidewall facets. Overall, these results, which are in direct contrast with previous reports suggesting that heteroepitaxial radial growth of III-antimonides is always favored on the ZB-structure facets, indicate that the growth of WZ-AlSb is preferred over the thermodynamically stable ZB-AlSb at lower growth temperatures. We attribute this behavior to kinetic limitations of MOVPE of AlSb on ZB and WZ phases of InAs.

H+-ATPase B1 subunit localizes to thick ascending limb and distal convoluted tubule of rodent and human kidney.

The vacuolar-type H+-ATPase B1 subunit is heavily expressed in the intercalated cells of the collecting system, where it contributes to H+ transport, but has also been described in other segments of the renal tubule. This study aimed to determine the localization of the B1 subunit of the vacuolar-type H+-ATPase in the early distal nephron, encompassing thick ascending limbs (TAL) and distal convoluted tubules (DCT), in human kidney and determine whether the localization differs between rodents and humans. Antibodies directed against the H+-ATPase B1 subunit were used to determine its localization in paraffin-embedded formalin-fixed mouse, rat, and human kidneys by light microscopy and in sections of Lowicryl-embedded rat kidneys by electron microscopy. Abundant H+-ATPase B1 subunit immunoreactivity was observed in the human kidney. As expected, intercalated cells showed the strongest signal, but significant signal was also observed in apical membrane domains of the distal nephron, including TAL, macula densa, and DCT. In mouse and rat, H+-ATPase B1 subunit expression could also be detected in apical membrane domains of these segments. In rat, electron microscopy revealed that the H+-ATPase B1 subunit was located in the apical membrane. Furthermore, the H+-ATPase B1 subunit colocalized with other H+-ATPase subunits in the TAL and DCT. In conclusion, the B1 subunit is expressed in the early distal nephron. The physiological importance of H+-ATPase expression in these segments remains to be delineated in detail. The phenotype of disease-causing mutations in the B1 subunit may also relate to its presence in the TAL and DCT.

Sb Incorporation in Wurtzite and Zinc Blende InAs1-x Sbx Branches on InAs Template Nanowires.

The physical properties of material largely depend on their crystal structure. Nanowire growth is an important method for attaining metastable crystal structures in III-V semiconductors, giving access to advantageous electronic and surface properties. Antimonides are an exception, as growing metastable wurtzite structure has proven to be challenging. As a result, the properties of these materials remain unknown. One promising means of accessing wurtzite antimonides is to use a wurtzite template to facilitate their growth. Here, a template technique using branched nanowire growth for realizing wurtzite antimonide material is demonstrated. On wurtzite InAs trunks, InAs1-x Sbx branch nanowires at different Sb vapor phase compositions are grown. For comparison, branches on zinc blende nanowire trunks are also grown under identical conditions. Studying the crystal structure and the material composition of the grown branches at different xv shows that the Sb incorporation is higher in zinc blende than in wurtzite. Branches grown on wurtzite trunks are usually correlated with stacking defects in the trunk, leading to the emergence of a zinc blende segment of higher Sb content growing parallel to the wurtzite structure within a branch. However, the average amount of Sb incorporated within the branch is determined by the vapor phase composition.

Characterization of individual stacking faults in a wurtzite GaAs nanowire by nanobeam X-ray diffraction.

Coherent X-ray diffraction was used to measure the type, quantity and the relative distances between stacking faults along the growth direction of two individual wurtzite GaAs nanowires grown by metalorganic vapour epitaxy. The presented approach is based on the general property of the Patterson function, which is the autocorrelation of the electron density as well as the Fourier transformation of the diffracted intensity distribution of an object. Partial Patterson functions were extracted from the diffracted intensity measured along the [000\bar{1}] direction in the vicinity of the wurtzite 00\bar{1}\bar{5} Bragg peak. The maxima of the Patterson function encode both the distances between the fault planes and the type of the fault planes with the sensitivity of a single atomic bilayer. The positions of the fault planes are deduced from the positions and shapes of the maxima of the Patterson function and they are in excellent agreement with the positions found with transmission electron microscopy of the same nanowire.

Direct nucleation, morphology and compositional tuning of InAs1-x Sb x nanowires on InAs (111) B substrates.

III-V ternary nanowires are interesting due to the possibility of modulating their physical and material properties by tuning their material composition. Amongst them InAs1-x Sb x nanowires are good candidates for applications such as Infrared detectors. However, this material has not been grown directly from substrates, in a large range of material compositions. Since the properties of ternaries are alterable by tuning their composition, it is beneficial to gain access to a wide range of composition tunability. Here we demonstrate direct nucleation and growth of InAs1-x Sb x nanowires from Au seed particles over a broad range of compositions (x = 0.08-0.75) for different diameters and surface densities by means of metalorganic vapor phase epitaxy. We investigate how the nucleation, morphology, solid phase Sb content, and growth rate of these nanowires depend on the particle dimensions, and on growth conditions such as the vapor phase composition, V/III ratio, and temperature. We show that the solid phase Sb content of the nanowires remains invariant towards changes of the In precursor flow. We also discuss that at relatively high In flows the growth mechanism alters from Au-seeded to what is referred to as semi In-seeded growth. This change enables growth of nanowires with a high solid phase Sb content of 0.75 that are not feasible via Au-seeded growth. Independent of the growth conditions and morphology, we report that the nanowire Sb content changes over their length, from lower Sb contents at the base, increasing to higher amounts towards the tip. We correlate the axial Sb content variations to the axial growth rate measured in situ. We also report spontaneous core-shell formation for Au-seeded nanowires, where the core is Sb-rich in comparison to the Sb-poor shell.

An Effective Evolutionary Hybrid for Solving the Permutation Flowshop Scheduling Problem.

This paper presents an effective evolutionary hybrid for solving the permutation flowshop scheduling problem. Based on a memetic algorithm, the procedure uses a construction component that generates initial solutions through the use of a novel reblocking mechanism operating according to a biased random sampling technique. This component is aimed at forcing the operations having smaller processing times to appear on the critical path. The goal of the construction component is to fill an initial pool with high-quality solutions for a memetic algorithm that looks for even higher-quality solutions. In the memetic algorithm, whenever a crossover operator and possibly a mutation are performed, the offspring genome is fine-tuned by a combination of 2-exchange swap and insertion local searches. The same with the employed construction method; in these local searches, the critical path notion has been used to exploit the structure of the problem. The results of computational experiments on the benchmark instances indicate that these components have strong synergy, and their integration has created a robust and effective procedure that outperforms several state-of-the-art procedures on a number of the benchmark instances. By deactivating different components enhancing the evolutionary module of the procedure, the effects of these components have also been examined.