RESUMO
Converting carbon dioxide (CO2) into high-value chemicals using solar energy remains a formidable challenge. In this study, the CSC@PM6:IDT6CN-M:IDT8CN-M non-fullerene small-molecule organic semiconductor is designed with highly efficient electron donor-acceptor (D-A) interface for photocatalytic reduction of CO2. Atomic Force Microscope and Transmission Electron Microscope images confirmed the formation of an interpenetrating fibrillar network after combination of donor and acceptor. The CO yield from the CSC@PM6:IDT6CN-M:IDT8CN-M reached 1346 µmol g-1 h-1, surpassing those of numerous reported inorganic photocatalysts. The D-A structure effectively facilitated charge separation to enable electrons transfer from the PM6 to IDT6CN-M:IDT8CN-M. Meanwhile, attributing to the dipole moments of the strong intermolecular interactions between IDT6CN-M and IDT8CN-M, the intermolecular forces are enhanced, and laminar stacking and π-π stacking are strengthened, thereby reinforcing energy transfer between acceptor molecules and significantly enhanced charge separation. Moreover, the strong internal electric field in the D-A interface enhanced the excited state lifetime of PM6:IDT6CN-M:IDT8CN-M. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis demonstrated that carboxylate (COOH*) is the predominant intermediate during CO2 reduction, and possible pathways of CO2 reduction to CO are deduced. This study presents a novel approach for designing materials with D-A interface to achieve high photocatalytic activity.
RESUMO
Low dissolved oxygen (LO) conditions represent a major environmental challenge to marine life, especially benthic animals. For these organisms, drastic declines in oxygen availability (hypoxic events) can trigger mass mortality events and thus, act as agents of selection influencing the evolution of adaptations. In sea cucumbers, one of the most successful groups of benthic invertebrates, the exposure to hypoxic conditions triggers adaptive adjustments in metabolic rates and behaviour. It is unclear, however, how these adaptive responses are regulated and the genetic mechanisms underpinning them. Here, we addressed this knowledge gap by assessing the genetic regulation (transcription and translation) of hypoxia exposure in the sea cucumber Apostichopus japonicus. Transcriptional and translational gene expression profiles under short- and long-term exposure to low oxygen conditions are tightly associated with extracellular matrix (ECM)-receptor interaction in which laminin and collagen likely have important functions. Finding revealed that genes with a high translational efficiency (TE) had a relatively short upstream open reading frame (uORF) and a high uORF normalized minimal free energy, suggesting that sea cucumbers may respond to hypoxic stress via altered TE. These results provide valuable insights into the regulatory mechanisms that confer adaptive capacity to holothurians to survive oxygen deficiency conditions and may also be used to inform the development of strategies for mitigating the harmful effects of hypoxia on other marine invertebrates facing similar challenges.
RESUMO
Bisphenols are emerging endocrine disrupting pollutant, and several studies have reported that they are already ubiquitous in various environmental matrices and intend to deposit in sediment. The primary sources of bisphenols are river and sewage discharge. Sea cucumber (Apostichopus japonicus), a typical deposit feeder, is one of the most important commercial marine species in Aisa. However, the effects of the bisphenol A (BPA) and its analogues bisphenol AF (BPAF) on sea cucumber was unclear. In this study, we carried out field survey in major sea cucumber farming areas in northern China, with the aim of determining which bisphenol analogue is the major bisphenol contamination in this aquaculture area. The results showed that the presence of BPAF was detected in four sampling sites (Dalian, Tangshan, Laizhou, and Longpan). The mean level of BPAF in Laizhou sediment samples was the highest which reached to 9.007 ± 4.702 µ g/kg. Among the seawater samples, the BPAF only have been detected in the samples collected at Longpan. (0.011 ± 0.003 µ g/L). Furthermore, we conducted an experiment to evaluate the single and combined toxicity of BPA and BPAF on sea cucumbers. The concentrations were informed by the findings based on the results of field research. (0.1, 1.0, and 10 µ g/L). After exposure, the body weight gain, and specific growth rate showed no significant changes (P > 0.05). We observed the histological alterations in respiratory tree of treated sea cucumbers including the fusion and detachment of lining epithelial tissue, and increase of lumen space. However, the catalase (CAT), malondialdehyde (MDA), and glutathione (GSH) activity was not significantly changed (P > 0.05). We evaluated the effects of BPA and BPAF through calculating the integrated biomarker response index (IBR), and the results indicated that the toxicity of combined treatment was higher than single treatment. Additionally, BPAF exposure to A. japonicus was more toxic than BPA.
Assuntos
Compostos Benzidrílicos , Fenóis , Poluentes Químicos da Água , Animais , Fenóis/toxicidade , Fenóis/análise , Compostos Benzidrílicos/toxicidade , Compostos Benzidrílicos/análise , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análise , China , Disruptores Endócrinos/toxicidade , Disruptores Endócrinos/análise , Stichopus/efeitos dos fármacos , Água do Mar/química , Sedimentos Geológicos/química , Sedimentos Geológicos/análise , Pepinos-do-Mar/efeitos dos fármacos , Pepinos-do-Mar/química , Testes de Toxicidade Crônica , FluorocarbonosRESUMO
CO2-induced ocean acidification and warming pose ecological threats to marine life, especially calcifying species such as echinoderms, who rely on biomineralization for skeleton formation. However, previous studies on echinoderm calcification amid climate change had a strong bias towards heavily calcified echinoderms, with little research on lightly calcified ones, such as sea cucumbers. Here, we analyzed the embryo-larval development and their biomineralization-related gene expression of a lightly calcified echinoderm, the sea cucumber (Apostichopus japonicus), under experimental seawater acidification (OA) and/or warming (OW). Results showed that OA (- 0.37 units) delayed development and decreased body size (8.58-56.25 % and 0.36-19.66 % decreases in stage duration and body length, respectively), whereas OW (+3.1 °C) accelerated development and increased body size (33.99-55.28 % increase in stage duration and 2.44-14.41 % enlargement in body length). OW buffered the negative effects of OA on the development timing and body size of A. japonicus. Additionally, no target genes were expressed in the blastula stage, and only two biomineralization genes (colp3α, cyp2) and five TFs (erg, tgif, foxN2/3, gata1/2/3, and tbr) were expressed throughout the embryo-larval development. Our findings suggest that the low calcification in A. japonicus larvae may be caused by biomineralization genes contraction, and low expression of those genes. Furthermore, this study indicated that seawater acidification and warming affect expression of biomineralization-related genes, and had an effect on body size and development rate during the embryo-larval stage in sea cucumbers. Our study is a first step toward a better understanding of the complexity of high pCO2 on calcification and helpful for revealing the adaptive strategy of less-calcified echinoderms amid climate change.
Assuntos
Acidificação dos Oceanos , Água do Mar , Animais , Biomineralização , Concentração de Íons de Hidrogênio , Larva , Expressão GênicaRESUMO
Surface plasmon lithography (SPL) has emerged as an innovative approach to nano-fabrication, offering an alternative to traditional patterning methods. To enhance its pattern fidelity in manufacturing, it is essential to incorporate mask correction to reduce critical dimension (CD) errors between the intended target features and the photoresist image. Traditionally, the aerial image of SPL has been modeled and simulated using methods such as finite difference time domain (FDTD) or rigorous coupled wave analysis (RCWA). These models have allowed us to obtain aerial images of the mask patterns. However, relying solely on the aerial image proves insufficient for meeting the rigorous manufacturing standards for mask correction. In our research, we propose a comprehensive model that combines the optical model, employing the FDTD method, and the resist model, tailored to the specific surface plasmon lithography process. Test patterns were meticulously designed with a target CD of 130 nm, and the model was applied to simulate these test patterns, producing the after-development image (ADI) under predefined process conditions. Following a thorough analysis and data processing of the test patterns and ADI data, we established rule tables for the correction of both 1D line patterns and line end patterns. The simulation results unequivocally demonstrate the improved CD error performance achieved by the post-corrected patterns.
RESUMO
BACKGROUND: Assessing the aggressiveness of pure ground glass nodules early on significantly aids in making informed clinical decisions. OBJECTIVE: Developing a predictive model to assess the aggressiveness of pure ground glass nodules in lung adenocarcinoma is the study's goal. METHODS: A comprehensive search for studies on the relationship between computed tomography(CT) characteristics and the aggressiveness of pure ground glass nodules was conducted using databases such as PubMed, Embase, Web of Science, Cochrane Library, Scopus, Wanfang, CNKI, VIP, and CBM, up to December 20, 2023. Two independent researchers were responsible for screening literature, extracting data, and assessing the quality of the studies. Meta-analysis was performed using Stata 16.0, with the training data derived from this analysis. To identify publication bias, Funnel plots and Egger tests and Begg test were employed. This meta-analysis facilitated the creation of a risk prediction model for invasive adenocarcinoma in pure ground glass nodules. Data on clinical presentation and CT imaging features of patients treated surgically for these nodules at the Third Affiliated Hospital of Kunming Medical University, from September 2020 to September 2023, were compiled and scrutinized using specific inclusion and exclusion criteria. The model's effectiveness for predicting invasive adenocarcinoma risk in pure ground glass nodules was validated using ROC curves, calibration curves, and decision analysis curves. RESULTS: In this analysis, 17 studies were incorporated. Key variables included in the model were the largest diameter of the lesion, average CT value, presence of pleural traction, and spiculation. The derived formula from the meta-analysis was: 1.16×the largest lesion diameter + 0.01 × the average CT value + 0.66 × pleural traction + 0.44 × spiculation. This model underwent validation using an external set of 512 pure ground glass nodules, demonstrating good diagnostic performance with an ROC curve area of 0.880 (95% CI: 0.852-0.909). The calibration curve indicated accurate predictions, and the decision analysis curve suggested high clinical applicability of the model. CONCLUSION: We established a predictive model for determining the invasiveness of pure ground-glass nodules, incorporating four key radiological indicators. This model is both straightforward and effective for identifying patients with a high likelihood of invasive adenocarcinoma.
Assuntos
Neoplasias Pulmonares , Invasividade Neoplásica , Tomografia Computadorizada por Raios X , Humanos , Neoplasias Pulmonares/diagnóstico por imagem , Neoplasias Pulmonares/patologia , Tomografia Computadorizada por Raios X/métodos , Medição de Risco , Adenocarcinoma de Pulmão/diagnóstico por imagem , Adenocarcinoma de Pulmão/patologia , Nódulos Pulmonares Múltiplos/diagnóstico por imagem , Nódulos Pulmonares Múltiplos/patologiaRESUMO
Positive illusions and winning exposure are key factors leading to problem lottery gambling, but few studies have examined the relationships between them. 402 Chinese lottery gamblers was conducted with the Winning Exposure Questionnaire, the Positive illusion Questionnaire, the Winning Experience Questionnaire, and the Social and Economic Status Questionnaire to investigate the relationship between winning exposure and positive illusions as well as the moderating role of winning experience and socioeconomic status. The results showed that winning exposure can significantly and positively predict the positive illusions (optimism bias, better than average bias, and illusion of control) of lottery gamblers. The highest winning amount and subjective socioeconomic status significantly moderated the relationship between winning exposure and optimism bias. That was to say, for lottery gamblers with smaller maximum winning amount and lower subjective socioeconomic status, the association between winning exposure and optimism bias was stronger. Furthermore, the moderating effect of highest winning amount in the relationship between winning exposure and better than average bias, and the moderating effects of occupational status and subjective socioeconomic status in the relationship between winning exposure and illusion of control were marginally significant.
RESUMO
The seabed desertification has increasingly highlighted the importance of benthic habitat restoration. Strategically engineered artificial reefs emerges as pivotal in achieving restoration objectives. However, the significant influence of foundation species on biotic components and ecosystem attributes within diverse artificial reefs has been underrecognized. This study collated twenty Ecopath models of artificial reefs and their corresponding natural control ecosystems along the coasts of the Yellow Sea and Bohai Sea, China, categorizing them into five distinct system types predicated on the biomass and productivity of foundational species. Our results suggest that dimensionless indices, rather than actual system values, were posited to facilitate inter-comparative analysis. The comparative analysis revealed differences in biomass distribution, energy utilization, and trophic structure across the five ecosystem types. All the artificial reef systems collectively enhanced the utilization of primary production. Foundation species components formed the cornerstone of system functionality, significantly impacting ecosystem stability through modulation of energy flow dynamics. Distinct impacts were observed from shellfish and macroalgae; the former augmenting the detrital food chain, while the latter bolstering the grazing food chain. Consequently, the model-based integrated analysis enabled a robust comparison among various types of artificial reef ecosystems and confirmed that promoting the colonization of foundation species was a non-negligible factor in the design and deployment of artificial reefs.
Assuntos
Biomassa , Recifes de Corais , Ecossistema , Conservação dos Recursos Naturais , China , Animais , Cadeia Alimentar , Modelos TeóricosRESUMO
Vibrations of the reticle and wafer stage are inevitable due to the high speed and acceleration required during the exposure movement of the lithography system. Previous studies have shown that these vibrations have an impact on both overlay and imaging quality. Furthermore, as the integrated circuit industry continues to develop and extreme ultraviolet (EUV) lithography is increasingly utilized, the size of the exposure image continues to decrease, making the stability of the reticle and wafer stage motion increasingly important. This paper establishes a model of the reticle and wafer stage motion under the influence of vibration based on the advanced process node of EUV lithography. We investigate the relationship between variations in vibration amplitude and frequency and their effects on imaging contrast and line edge roughness (LER). Additionally, we simulate the quantitative relationship between the vibration of the reticle and wafer stage and the imaging quality of through-pitch line/space structures, tip-to-tip (T2T) structures, and tip-to-line (T2L) structures under extreme exposure conditions of EUV lithography using a computer.
RESUMO
This paper reminds the principle and characteristics of plasmonic lithography, and points out the importance of establishing a fast and high precision plasmonic lithography imaging model and developing computational lithography. According to the characteristics of plasmonic lithography, the rigorous coupled-wave analysis (RCWA) algorithm is a very suitable alternative algorithm. In this paper, a three-dimensional plasmonic lithography model based on RCWA algorithm is established for computational lithography requirements. This model improves the existing RCWA algorithm, that is, deduces the formula for calculating the light field inside the structure and proposes the integration, storage and invocation of the scattering matrix to improve the computation speed. Finally, the results are compared with commercial software for the two typical patterns. The results show that the two calculation results are very close, with the root mean square error (RMSE) less than 0.04 (V/m)2. In addition, the calculation speed can be increased by more than 2 times in the first calculation, and by about 8 times by integrating, storing and invoking the scattering matrix, which creates conditions for the development of plasmonic computational lithography.
RESUMO
For many years, the atomic structures of several defects in diamond with high wavenumber (>4000 cm-1), including "amber centers", H1b, and H1c, have been investigated, but a conclusive explanation is still lacking. In this paper, we propose a novel model for the N-H bond under repulsion, with an expected vibrational frequency exceeding 4000 cm-1. Additionally, potential defects called NVH4 are proposed to investigate their correlation with these defects. Three NVH4 defects are considered, denoting a charge of e = +1, e = 0, and e = -1 for NVH4+, NVH04, and NVH4-, respectively. Subsequently, the geometry, charge, energy, band structure, and spectroscopic characterization of the three defects NVH4+, NVH04, and NVH4- are analysed. Then, the calculated harmonic modes of N3VH defects are used as a benchmark for studying NVH4. The simulations indicate that, with the use of scaling factors, the highest NVH4+ harmonic infrared peaks are 4072 cm-1, 4096 cm-1, and 4095 cm-1 with PBE, PBE0, and B3LYP, respectively, along with a calculated anharmonic infrared peak at 4146 cm-1. These calculated characteristic peaks closely match those observed in "amber centers" (4065 cm-1 and 4165 cm-1). However, based on the additional simulated anharmonic infrared peak at 3792 cm-1, NVH4+ cannot be assigned to the 4165 cm-1 band. It is possible to assign the 4065 cm-1 band to NVH4+; even though it can remain stable in diamond at 1973 K, establishing and measuring this benchmark could be challenging. Although NVH4+ is uncertain as a structure in "amber centers", a model of the N-H bond under repulsion stretching is proposed, which can generate a vibrational frequency surpassing 4000 cm-1. It may provide a useful avenue for investigating high wavenumber defect structures in diamond.
RESUMO
Myosin heavy chain 16 (MYH16) may significantly affect cell cycle progression. Nevertheless, there is a lack of evidence about the clinical relevance of MYH16 upregulation in pan cancers, including lung adenocarcinoma (LUAD). MYH16 expression patterns were evaluated in various bioinformatics databases using The Cancer Genome Atlas data set. Clinical and pathological factor data were employed to risk-stratify patients. The Kaplan-Meier plotter approach was used to estimate survival rates. Tumor immune infiltration was explored via the TIMER tool, and gene set enrichment analysis (GSEA) was used to identify the pathways involved in MYH16 upregulation. The results showed that MYH16 was abnormally upregulated in pan cancers, including LUAD. MYH16 expression induction in LUAD was found to be related to the tumor stage. Furthermore, MYH16 upregulation was correlated with LUAD development and worse overall survival, particularly in women. Notably, MYH16 overexpression in LUAD tissues corresponded to the amount of immune infiltration in the tumor. Additionally, univariate Cox hazard regression analysis revealed that MYH16 may be an independent prognostic indicator for LUAD. Furthermore, a nomogram was constructed according to MYH16 expression and clinical characteristics. BMP6 expression deficiency may be a key factor contributing to MYH16 upregulation in LUAD. Finally, GSEA demonstrated that MYH16 might mediate meiosis and gene silencing through RNA signaling pathways. This study, for the first time, showed that MYH16 upregulation in LUAD is associated with various risk factors, increased cancer aggressiveness, enhanced infiltration of tumor immune cells, and reduced survival rates.
Assuntos
Adenocarcinoma de Pulmão , Adenocarcinoma , Neoplasias Pulmonares , Feminino , Humanos , Adenocarcinoma/genética , Adenocarcinoma de Pulmão/genética , Neoplasias Pulmonares/genética , Cadeias Pesadas de Miosina/genética , Regulação para CimaRESUMO
Peer victimization and depressive symptoms are highly relevant risks during adolescence. Understanding the dynamic patterns of interactions between peer victimization and depressive symptoms as well as gender differences in these variables can improve intervention strategies for adolescents navigating this critical transition period. In the present study, a large sample of Chinese adolescents reported peer victimization and depressive symptoms in four survey waves at six-month intervals. A total of 2534 adolescents (51.9% boys, M = 12.98 ± 0.60 years) were included in the latent change score (LCS) analysis. The results supported the reciprocal effects model obtained in the full sample. Changes in peer victimization were influenced by prior changes in depressive symptoms over time, and changes in depressive symptoms were influenced by prior levels of peer victimization. There were also gender differences, with boys exhibiting depressive symptom-driven effects on peer victimization, while girls exhibiting peer victimization-induced depressive symptoms. The dynamic relationships between peer victimization and depressive symptoms that promote and constrain each other in adolescents are elucidated in this study. Differentiating effects on boys and girls is crucial for enhancing the effectiveness of practical interventions.
RESUMO
Different from traditional lithography, metal material with high absorptivity and high reflectivity is introduced into plasmonic lithography technology. In particular, a silver/photo resist/silver film stack can form a Fabry-Perot (F-P) resonator structure, which can greatly change the behavior of the light reflection and transmission. Since the silver layer has a strong absorption ability to the alignment probe light with a wavelength of 532 or 633 nm, the quality of the alignment signal is seriously affected. In this paper, a thin film Fourier transfer model is established to quantitatively calculate the amplitude and phase information of the diffraction light with different orders. The results show that the diffraction optical power can be enhanced by the thickness optimization of all film stacks, and the maximum wafer quality (normalized diffraction efficiency) can be increased to 25.7%. The mechanism analysis of alignment signal enhancement is based on the F-P resonator phase oscillation amplification effect. However, it can also bring the reverse of both the power and phase for the alignment probe signal when the thickness fluctuation of the F-P resonator exists, which will be a great challenge for through-the-mask moiré fringe alignment technology. To obtain the optical power distribution of the structure surface and image of moiré fringes, a transfer matrix method is given to point-by-point calculate the incidence and reflection of the probe light in the vertical direction. The finite-difference time-domain method is also used to demonstrate alignment performance. It is proved that the subtle fluctuation of the photoresist thickness can make a huge difference to moiré fringes. A balance between the diffraction efficiency and process robustness can be achieved for plasmonic lithographic alignment technology by controlling the thickness range of the F-P resonator structure. In addition, the metal-insulator-metal structure has excellent thickness sensitivity and is applicable to optical signal detection and material property monitoring.
RESUMO
Design technology co-optimization (DTCO) is a potential approach to tackle the escalating expenses and complexities associated with pitch scaling. This strategy offers a promising solution by minimizing the required design dimensions and mitigating the pitch scaling trend. It is worth noting that lithography has played a significant role in dimensional scaling over time. This paper proposes a DTCO flow to reduce the impact of the process variation (PV) band and edge placement error (EPE). First, we performed the digital back-end design of the high-performance processor and got the test layout; second, we executed timing analysis on the test layout to get the critical path net that affects the chip performance; third, we proposed the timing-aware optimized optical proximity correction (OPC) method to optimize the PV band and EPE by adjusting the weights of critical path net merit points, optimizing the generation of the sub-resolution assistant feature, giving tighter EPE specs for merit points on the critical path net, and placing denser merit points as well as denser breakpoints for the critical path net to obtain greater freedom in the OPC process. Finally, it is verified that our proposed DTCO process can significantly reduce the EPE and lead to a slight decrease in the PV band of the chip while maintaining the same process windows.
RESUMO
Interspecific crosses that fuse the genomes of two different species may result in overall gene expression changes in the hybrid progeny, called 'transcriptome shock'. To better understand the expression pattern after genome merging during the early stages of allopolyploid formation, we performed RNA sequencing analysis on developing embryos of Brassica rapa, B. napus, and their synthesized allotriploid hybrids. Here, we show that the transcriptome shock occurs in the developing seeds of the hybrids. Of the homoeologous gene pairs, 17.1% exhibit expression bias, with an overall expression bias toward B. rapa. The expression level dominance also biases toward B. rapa, mainly induced by the expression change in homoeologous genes from B. napus. Functional enrichment analysis revealed significant differences in differentially expressed genes (DEGs) related to photosynthesis, hormone synthesis, and other pathways. Further study showed that significant changes in the expression levels of the key transcription factors (TFs) could regulate the overall interaction network in the developing embryo, which might be an essential cause of phenotype change. In conclusion, the present results have revealed the global changes in gene expression patterns in developing seeds of the hybrid between B. rapa and B. napus, and provided novel insights into the occurrence of transcriptome shock for harnessing heterosis.
Assuntos
Brassica napus , Brassica rapa , Brassica napus/genética , Brassica rapa/genética , Transcriptoma , Vigor Híbrido , FenótipoRESUMO
Meiotic recombination not only maintains the stability of the chromosome structure but also creates genetic variations for adapting to changeable environments. A better understanding of the mechanism of crossover (CO) patterns at the population level is useful for crop improvement. However, there are limited cost-effective and universal methods to detect the recombination frequency at the population level in Brassica napus. Here, the Brassica 60K Illumina Infinium SNP array (Brassica 60K array) was used to systematically study the recombination landscape in a double haploid (DH) population of B. napus. It was found that COs were unevenly distributed across the whole genome, and a higher frequency of COs existed at the distal ends of each chromosome. A considerable number of genes (more than 30%) in the CO hot regions were associated with plant defense and regulation. In most tissues, the average gene expression level in the hot regions (CO frequency of greater than 2 cM/Mb) was significantly higher than that in the regions with a CO frequency of less than 1 cM/Mb. In addition, a bin map was constructed with 1995 recombination bins. For seed oil content, Bin 1131 to 1134, Bin 1308 to 1311, Bin 1864 to 1869, and Bin 2184 to 2230 were identified on chromosomes A08, A09, C03, and C06, respectively, which could explain 8.5%, 17.3%, 8.6%, and 3.9% of the phenotypic variation. These results could not only deepen our understanding of meiotic recombination in B. napus at the population level, and provide useful information for rapeseed breeding in the future, but also provided a reference for studying CO frequency in other species.
Assuntos
Brassica napus , Brassica napus/genética , Mapeamento Cromossômico/métodos , Locos de Características Quantitativas , Haploidia , Melhoramento Vegetal , Genoma de PlantaRESUMO
Although social preference promotes adolescents' defending behaviors, its potential mechanisms across gender cliques remain unclear from the group dynamic perspective. This study investigated 2470 Chinese early adolescents (49% girls, Mage = 14.40, SD = 0.58) to explore how social preference and clique hierarchy are associated with defending behaviors and whether these associations differ across gender-specific cliques. The results revealed that social preference was positively related to defending behaviors in boys' cliques, but negatively in girls' cliques. Furthermore, the association was strengthened by hierarchization in boys' cliques but was weakened in girls' cliques, while the status structure strengthened the association in boys' but not girls' cliques. These findings hold crucial implications for understanding and promoting defending behaviors among adolescents.
Assuntos
Comportamento do Adolescente , Masculino , Humanos , Adolescente , Fatores Sexuais , Transtornos do Comportamento SocialRESUMO
Plasmonic lithography can make the evanescent wave at the mask be resonantly amplified by exciting surface plasmon polariton (SPP) and participate in imaging, which can break through the diffraction limit in conventional lithography. It provides a reliable technical way for the study of low-cost, large-area and efficient nanolithography technology. However, there is also a phenomenon in plasmonic lithography similar to the forbidden pitch in conventional projection lithography. In this paper, combined with the imaging model and the optical transfer function (OTF), the theoretical analysis points out the reasons for the existence of the phenomenon of forbidden pitch in plasmonic lithography. Taking the 365 nm wavelength Ag thin film-based superlens imaging lithography as an example, the positions of the forbidden pitches of the 1:1 mask, the bright-field mask and the dark-field mask are calculated separately, and the key factors affecting their positions are pointed out. Simulation is carried out through commercial software, and the correctness of theoretical analysis is verified. Finally, we summarize and give some possible suggestions for solving this problem, including exploring better illumination methods, avoiding the patterns with forbidden pitch in the design, or by adding assistant feature to the design.
RESUMO
BACKGROUND: Radial artery (RA) atherosclerosis in acute coronary syndrome (ACS) patients has not been systematically observed in vivo. The study aims to characterize plaque morphology and intimal hyperplasia of the RA in patients with ACS, using optical coherence tomography (OCT). METHODS: In this retrospective study involving 239 ACS patients underwent RA OCT without guidewire shadow, 3 groups were divided according to the following criteria: radial artery plaque (RAP) group included patients with fibrous, lipid or calcified plaque; patients without RAP were further classified into radial intimal hyperplasia (RIH) group (intima media thickness ratio [IMR] ≥ 1) or normal group (IMR < 1). The presence and characteristics of RAP and its related risk factors were identified. RESULTS: The RAP, RIH and normal groups included 76 (31.8%), 69 (28.9%) and 94 (39.3%) patients, respectively. Patients in RAP group were the oldest, compared with those in the RIH and normal groups (p < 0.001), and more frequently had triple vessel disease (p = 0.004). The percentage of plaque rupture (72.4% vs. 56.4%, p = 0.018) and calcification (42.1% vs. 27.6%, p = 0.026) at culprit lesion were significantly higher in patients with RAP than those without RAP. A total of 148 RAP were revealed by OCT, including fibrous (72, 48.6%), lipid (50, 33.8%) and calcified plaques (26, 17.6%). The microvessels were also frequently observed in the RAP group than that in RIH and normal groups (59.2% vs. 8.7% vs. 9.6%, p < 0.001). Multivariate logistic regression analysis showed that age, diabetes, and smoking history (all p < 0.05) were independent risk factors for RAP. CONCLUSIONS: In terms of insights gained from OCT, RA atherosclerosis is not uncommon in ACS patients by OCT, sharing several morphological characters with early coronary atherosclerosis. Aging, diabetes, and smoking are risk factors for RAP.